Re: [BUG] linux-next: Tree for March 25 kernel oops, when loading mpt fusion driver - regression

[James Bottomley <James.Bottomley@HansenPartnership.com>]

On Tue, 2008-07-08 at 01:47 +0530, Kamalesh Babulal wrote:
> James Bottomley wrote:
> > On Thu, 2008-06-26 at 15:38 -0500, David Teigland wrote:
> >> On Wed, Mar 26, 2008 at 12:14:00PM +0530, Kamalesh Babulal wrote:
> >>> Hi Stephen,
> >>>
> >>> Kernel bug is hit while booting up the next-20080325 kernel with MPT
> >>> Fusion driver built in.This was reported previously for the
> >>> next-20080320 kernel
> >>> http://marc.info/?l=linux-next&m=120601013920868&w=2
> >> Hi, did you ever get this fixed?  I've been having the same problem,
> >> http://marc.info/?l=linux-scsi&m=121061780821823&w=4
> >> still exists on 2.6.26-rc8 for me,
> >>
> >> Loading scsi_transport_spi.ko module
> >> Loading mptscsih.ko module
> >> Loading mptspi.ko module
> >> Fusion MPT SPI Host driver 3.04.06
> >> ACPI: PCI Interrupt 0000:86:01.0[A] -> GSI 32 (level, low) -> IRQ 32
> >> mptbase: ioc0: Initiating bringup
> >> ioc0: LSI53C1030 B2: Capabilities={Initiator,Target}
> >> mptbase: ioc0: PCI-MSI enabled
> > 
> > I speculate that this might be related to the problem.  The fusion
> > driver was recently flipped to default to MSI enable (previously it had
> > disabled them).  Could you boot it with the fusion module parameter
> > 
> > mpt_msi_enable=0
> > 
> > if it actually boots that will be a good confirmation that MSI is to
> > blame.
> > 
> >> mptbase: ioc0: Initiating recovery
> > 
> > This I suspect is because of a lost interrupt.
> > 
> >> BUG: unable to handle kernel NULL pointer dereference at 0000000000000948
> > 
> > And this one looks to be a second bug:  The MSI fault path is actually
> > causing this oops.
> > 
> > James
> > 
> Hi James,
> 
> Kernel Bug is still reproducible with 2.6.26-rc9-git1 kernel, I tried booting with mpt_msi_enable=0
> as boot paramenter, but the call trace remains the same
> 
> oading mptbase.ko module[    6.766853] Fusion MPT base driver 3.04.06
> 
> [    6.783482] Copyright (c) 1999-2007 LSI Corporation
> Loading mptscsih.ko module
> Loading mptspi.ko module
> [    6.813157] Fusion MPT SPI Host driver 3.04.06
> [    6.827369] ACPI: PCI Interrupt 0000:01:01.0[A] -> GSI 22 (level, low) -> IRQ 22
> [    6.850624] mptbase: ioc0: Initiating bringup
> [    6.985601] ioc0: LSI53C1030 B2: Capabilities={Initiator}
> [    7.002711] mptbase: ioc0: PCI-MSI enabled
                                ^^^^^^^^^^^^^^^

If you had successfully specified mpt_msi_enable=0 this line wouldn't
appear.

My best guess is that you incorrectly specified it as a kernel command
line parameter rather than a module parameter.

James