public inbox for linux-next@vger.kernel.org
 help / color / mirror / Atom feed
* e100/netconsole: Failed to load firmware (Re: linux-next: Tree for November 3)
@ 2008-11-03 12:25 Alexander Beregalov
  2008-11-03 15:49 ` Alexander Beregalov
  0 siblings, 1 reply; 6+ messages in thread
From: Alexander Beregalov @ 2008-11-03 12:25 UTC (permalink / raw)
  To: e1000-devel; +Cc: linux-next, Netdev

Hi

2.6.28-rc3-next-20081103 on sparc64

netconsole on e100 does not work

pci 0000:02:01.0: supports D1 D2
pci 0000:02:01.0: PME# supported from D0 D1 D2 D3hot
pci 0000:02:01.0: PME# disabled
device: '0000:02:01.0': device_add
bus: 'pci': add device 0000:02:01.0
pci 0000:02:01.0: calling quirk_e100_interrupt+0x0/0x1e4
pci 0000:02:01.0: calling quirk_cardbus_legacy+0x0/0x40
pci 0000:02:01.0: calling quirk_usb_early_handoff+0x0/0x42c
<...>
e100: Intel(R) PRO/100 Network Driver, 3.5.23-k4-NAPI
e100: Copyright(c) 1999-2006 Intel Corporation
bus: 'pci': add driver e100
bus: 'pci': driver_probe_device: matched device 0000:02:01.0 with driver e100
bus: 'pci': really_probe: probing driver e100 with device 0000:02:01.0
PCI: Enabling device: (0000:02:01.0), cmd 3
e100 0000:02:01.0: enabling bus mastering
e100 0000:02:01.0: PME# disabled
device: 'eth1': device_add
e100: eth1: e100_probe: addr 0x1ff00002000, irq 15, MAC addr 00:d0:b7:e4:d6:f1
driver: '0000:02:01.0': driver_bound: bound to device 'e100'
bus: 'pci': really_probe: bound device 0000:02:01.0 to driver e100
netconsole: local port 6665
netconsole: local IP 192.168.1.5
netconsole: interface eth1
netconsole: remote port 6667
netconsole: remote IP 192.168.1.3
netconsole: remote ethernet address 00:08:c7:da:88:fb
netconsole: device eth1 not up yet, forcing it
e100 0000:02:01.0: firmware: requesting e100/d101m_ucode.bin
device: '0000:02:01.0': device_add
device: '0000:02:01.0': device_unregister
e100: eth1: e100_request_firmware: Failed to load firmware
"e100/d101m_ucode.bin": -2
netconsole: failed to open eth1
netconsole: cleaning up
<...>
e100 0000:02:01.0: firmware: requesting e100/d101m_ucode.bin
device: '0000:02:01.0': device_add
device: '0000:02:01.0': device_unregister
e100: eth1: e100_watchdog: link up, 100Mbps, full-duplex


netconsole output (less verbose) from 2.6.28-rc3:

e100: Intel(R) PRO/100 Network Driver, 3.5.23-k4-NAPI
e100: Copyright(c) 1999-2006 Intel Corporation
e100 0000:02:01.0: PME# disabled
e100: eth1: e100_probe: addr 0x1ff00002000, irq 15, MAC addr 00:d0:b7:e4:d6:f1
netconsole: local port 6665
netconsole: local IP 192.168.1.5
netconsole: interface eth1
netconsole: remote port 6667
netconsole: remote IP 192.168.1.3
netconsole: remote ethernet address 00:08:c7:da:88:fb
netconsole: device eth1 not up yet, forcing it
e100: eth1: e100_watchdog: link up, 100Mbps, full-duplex
netconsole: carrier detect appears untrustworthy, waiting 4 seconds
console [netcon0] enabled
netconsole: network logging started

^ permalink raw reply	[flat|nested] 6+ messages in thread

end of thread, other threads:[~2008-11-03 16:42 UTC | newest]

Thread overview: 6+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2008-11-03 12:25 e100/netconsole: Failed to load firmware (Re: linux-next: Tree for November 3) Alexander Beregalov
2008-11-03 15:49 ` Alexander Beregalov
2008-11-03 15:56   ` David Woodhouse
2008-11-03 16:00     ` Alexander Beregalov
2008-11-03 16:09       ` David Woodhouse
2008-11-03 16:42         ` Alexander Beregalov

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox