From mboxrd@z Thu Jan 1 00:00:00 1970 From: Zhang Rui Subject: Re: linux-next: manual merge of the thermal tree with the imx-mxs tree Date: Wed, 18 Oct 2017 09:47:26 +0800 Message-ID: <1508291246.2746.41.camel@intel.com> References: <20171016091728.gbtoakghi4ndyyt2@sirena.co.uk> Mime-Version: 1.0 Content-Type: text/plain; charset="UTF-8" Content-Transfer-Encoding: 8bit Return-path: In-Reply-To: <20171016091728.gbtoakghi4ndyyt2@sirena.co.uk> Sender: linux-kernel-owner@vger.kernel.org To: Mark Brown , Leonard Crestez , Shawn Guo , Marco Franchi Cc: linux-arm-kernel@lists.infradead.org, Linux-Next Mailing List , Linux Kernel Mailing List List-Id: linux-next.vger.kernel.org Hi, Mark, thanks for the fix. On Mon, 2017-10-16 at 10:17 +0100, Mark Brown wrote: > Hi Zhang, > > Today's linux-next merge of the thermal tree got a conflict in: > >   arch/arm/boot/dts/imx6ul.dtsi > > between commit: > >    efb9adb274754 ("ARM: dts: imx6ul: Remove leading zeroes from unit > addresses") > > from the imx-mxs tree and commit: > >    1dc31d4981dd9 ("ARM: dts: imx6ul: Add imx6ul-tempmon") > > from the thermal tree. > > I fixed it up (see below) and can carry the fix as necessary. This > is now fixed as far as linux-next is concerned, but any non trivial > conflicts should be mentioned to your upstream maintainer when your > tree > is submitted for merging.  You may also want to consider cooperating > with the maintainer of the conflicting tree to minimise any > particularly > complex conflicts.  Usually DTS changes go through arm-soc to avoid > issues like this. Shawn, https://patchwork.kernel.org/patch/9841191/ https://patchwork.kernel.org/patch/9841193/ Should I drop these two dts patches and leave them to you? thanks, rui > > diff --cc arch/arm/boot/dts/imx6ul.dtsi > index 2057ee695a66,51717d54f285..000000000000 > --- a/arch/arm/boot/dts/imx6ul.dtsi > +++ b/arch/arm/boot/dts/imx6ul.dtsi > @@@ -860,13 -869,23 +869,23 @@@ >    reg = <0x021b0000 0x4000>; >    }; >    >  - ocotp: ocotp-ctrl@021bc000 { >  + ocotp: ocotp-ctrl@21bc000 { > +  #address-cells = <1>; > +  #size-cells = <1>; >    compatible = "fsl,imx6ul-ocotp", > "syscon"; >    reg = <0x021bc000 0x4000>; >    clocks = <&clks IMX6UL_CLK_OCOTP>; > +  > +  tempmon_calib: calib@38 { > +  reg = <0x38 4>; > +  }; > +  > +  tempmon_temp_grade: temp-grade@20 { > +  reg = <0x20 4>; > +  }; >    }; >    >  - lcdif: lcdif@021c8000 { >  + lcdif: lcdif@21c8000 { >    compatible = "fsl,imx6ul-lcdif", > "fsl,imx28-lcdif"; >    reg = <0x021c8000 0x4000>; >    interrupts = IRQ_TYPE_LEVEL_HIGH>;