* next-20080611 rt2x00: build failure
@ 2008-06-11 17:07 Randy Dunlap
2008-06-11 17:48 ` [Rt2400-devel] " Ivo van Doorn
[not found] ` <20080611100748.d35829f4.randy.dunlap-QHcLZuEGTsvQT0dZR+AlfA@public.gmane.org>
0 siblings, 2 replies; 11+ messages in thread
From: Randy Dunlap @ 2008-06-11 17:07 UTC (permalink / raw)
To: linux-next; +Cc: linux-wireless, rt2400-devel
[-- Attachment #1: Type: text/plain, Size: 3024 bytes --]
when CONFIG_INPUT=n and
# CONFIG_NEW_LEDS is not set
CONFIG_LEDS_CLASS=y
(full config attached)
vmlinux.o: In function `iwl_rfkill_unregister':
(.text+0x174cdc): undefined reference to `input_unregister_device'
vmlinux.o: In function `iwl_rfkill_init':
(.text+0x174d9f): undefined reference to `input_allocate_device'
vmlinux.o: In function `iwl_rfkill_init':
(.text+0x174e2d): undefined reference to `input_register_device'
vmlinux.o: In function `iwl_rfkill_init':
(.text+0x174e53): undefined reference to `input_free_device'
vmlinux.o: In function `rt2x00rfkill_allocate_polldev':
rt2x00rfkill.c:(.text+0x176dc4): undefined reference to `input_allocate_polled_device'
vmlinux.o: In function `rt2x00rfkill_poll':
rt2x00rfkill.c:(.text+0x176e8b): undefined reference to `input_event'
rt2x00rfkill.c:(.text+0x176e9f): undefined reference to `input_event'
vmlinux.o: In function `rt2x00rfkill_unregister':
(.text+0x176eca): undefined reference to `input_unregister_polled_device'
vmlinux.o: In function `rt2x00rfkill_free':
(.text+0x176efc): undefined reference to `input_free_polled_device'
vmlinux.o: In function `rt2x00rfkill_suspend':
(.text+0x176f37): undefined reference to `input_free_polled_device'
vmlinux.o: In function `rt2x00rfkill_register':
(.text+0x176fd8): undefined reference to `input_register_polled_device'
vmlinux.o: In function `rt2x00leds_resume':
(.text+0x1772c0): undefined reference to `led_classdev_resume'
vmlinux.o: In function `rt2x00leds_resume':
(.text+0x1772d4): undefined reference to `led_classdev_resume'
vmlinux.o: In function `rt2x00leds_resume':
(.text+0x1772e8): undefined reference to `led_classdev_resume'
vmlinux.o: In function `rt2x00leds_suspend':
(.text+0x17730a): undefined reference to `led_classdev_suspend'
vmlinux.o: In function `rt2x00leds_suspend':
(.text+0x17731e): undefined reference to `led_classdev_suspend'
vmlinux.o: In function `rt2x00leds_suspend':
(.text+0x17732f): undefined reference to `led_classdev_suspend'
vmlinux.o: In function `rt2x00leds_unregister_led':
rt2x00leds.c:(.text+0x177348): undefined reference to `led_classdev_unregister'
vmlinux.o: In function `rt2x00leds_register_led':
rt2x00leds.c:(.text+0x1773c0): undefined reference to `led_classdev_register'
vmlinux.o: In function `rfkill_disconnect':
rfkill-input.c:(.text+0x209e4c): undefined reference to `input_close_device'
rfkill-input.c:(.text+0x209e53): undefined reference to `input_unregister_handle'
vmlinux.o: In function `rfkill_connect':
rfkill-input.c:(.text+0x209ea1): undefined reference to `input_register_handle'
rfkill-input.c:(.text+0x209eae): undefined reference to `input_open_device'
rfkill-input.c:(.text+0x209ebb): undefined reference to `input_unregister_handle'
vmlinux.o: In function `rfkill_handler_init':
rfkill-input.c:(.init.text+0x17405): undefined reference to `input_register_handler'
vmlinux.o: In function `rfkill_handler_exit':
rfkill-input.c:(.exit.text+0x194f): undefined reference to `input_unregister_handler'
make[1]: *** [vmlinux] Error 1
---
~Randy
[-- Attachment #2: config-rt2x00 --]
[-- Type: application/octet-stream, Size: 26424 bytes --]
#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.26-rc5
# Wed Jun 11 10:00:49 2008
#
# CONFIG_64BIT is not set
CONFIG_X86_32=y
# CONFIG_X86_64 is not set
CONFIG_X86=y
CONFIG_ARCH_DEFCONFIG="arch/x86/configs/i386_defconfig"
# CONFIG_GENERIC_LOCKBREAK is not set
CONFIG_GENERIC_TIME=y
CONFIG_GENERIC_CMOS_UPDATE=y
CONFIG_CLOCKSOURCE_WATCHDOG=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
CONFIG_FAST_CMPXCHG_LOCAL=y
CONFIG_MMU=y
CONFIG_ZONE_DMA=y
CONFIG_GENERIC_ISA_DMA=y
CONFIG_GENERIC_IOMAP=y
CONFIG_GENERIC_BUG=y
CONFIG_GENERIC_HWEIGHT=y
# CONFIG_GENERIC_GPIO is not set
CONFIG_ARCH_MAY_HAVE_PC_FDC=y
# CONFIG_RWSEM_GENERIC_SPINLOCK is not set
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
# CONFIG_ARCH_HAS_ILOG2_U32 is not set
# CONFIG_ARCH_HAS_ILOG2_U64 is not set
CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
# CONFIG_GENERIC_TIME_VSYSCALL is not set
CONFIG_ARCH_HAS_CPU_RELAX=y
CONFIG_ARCH_HAS_CACHE_LINE_SIZE=y
CONFIG_HAVE_SETUP_PER_CPU_AREA=y
# CONFIG_HAVE_CPUMASK_OF_CPU_MAP is not set
CONFIG_ARCH_HIBERNATION_POSSIBLE=y
CONFIG_ARCH_SUSPEND_POSSIBLE=y
# CONFIG_ZONE_DMA32 is not set
CONFIG_ARCH_POPULATES_NODE_MAP=y
# CONFIG_AUDIT_ARCH is not set
CONFIG_ARCH_SUPPORTS_AOUT=y
CONFIG_ARCH_SUPPORTS_OPTIMIZED_INLINING=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_GENERIC_PENDING_IRQ=y
CONFIG_X86_SMP=y
CONFIG_X86_32_SMP=y
CONFIG_X86_HT=y
CONFIG_X86_BIOS_REBOOT=y
CONFIG_X86_TRAMPOLINE=y
CONFIG_KTIME_SCALAR=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
# General setup
#
CONFIG_EXPERIMENTAL=y
CONFIG_LOCK_KERNEL=y
CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_LOCALVERSION=""
CONFIG_LOCALVERSION_AUTO=y
# CONFIG_SYSVIPC is not set
CONFIG_POSIX_MQUEUE=y
CONFIG_BSD_PROCESS_ACCT=y
CONFIG_BSD_PROCESS_ACCT_V3=y
# CONFIG_TASKSTATS is not set
# CONFIG_AUDIT is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=17
# CONFIG_CGROUPS is not set
CONFIG_HAVE_UNSTABLE_SCHED_CLOCK=y
CONFIG_GROUP_SCHED=y
# CONFIG_FAIR_GROUP_SCHED is not set
# CONFIG_RT_GROUP_SCHED is not set
CONFIG_USER_SCHED=y
# CONFIG_CGROUP_SCHED is not set
# CONFIG_RELAY is not set
# CONFIG_NAMESPACES is not set
# CONFIG_BLK_DEV_INITRD is not set
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
CONFIG_SYSCTL=y
CONFIG_EMBEDDED=y
CONFIG_UID16=y
CONFIG_SYSCTL_SYSCALL=y
CONFIG_SYSCTL_SYSCALL_CHECK=y
# CONFIG_KALLSYMS is not set
CONFIG_HOTPLUG=y
# CONFIG_PRINTK is not set
CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_PCSPKR_PLATFORM=y
# CONFIG_COMPAT_BRK is not set
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
# CONFIG_SHMEM is not set
# CONFIG_VM_EVENT_COUNTERS is not set
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
CONFIG_PROFILING=y
CONFIG_MARKERS=y
CONFIG_OPROFILE=y
CONFIG_HAVE_OPROFILE=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
# CONFIG_HAVE_DMA_ATTRS is not set
# CONFIG_PROC_PAGE_MONITOR is not set
CONFIG_RT_MUTEXES=y
CONFIG_TINY_SHMEM=y
CONFIG_BASE_SMALL=0
# CONFIG_MODULES is not set
# CONFIG_BLOCK is not set
CONFIG_CLASSIC_RCU=y
#
# Processor type and features
#
CONFIG_TICK_ONESHOT=y
# CONFIG_NO_HZ is not set
CONFIG_HIGH_RES_TIMERS=y
CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
CONFIG_SMP=y
# CONFIG_X86_PC is not set
# CONFIG_X86_ELAN is not set
# CONFIG_X86_VOYAGER is not set
# CONFIG_X86_VISWS is not set
CONFIG_X86_GENERICARCH=y
# CONFIG_X86_NUMAQ is not set
# CONFIG_X86_SUMMIT is not set
CONFIG_X86_ES7000=y
# CONFIG_X86_BIGSMP is not set
# CONFIG_X86_RDC321X is not set
# CONFIG_X86_VSMP is not set
CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
CONFIG_PARAVIRT_GUEST=y
CONFIG_VMI=y
CONFIG_KVM_CLOCK=y
CONFIG_KVM_GUEST=y
CONFIG_LGUEST_GUEST=y
CONFIG_PARAVIRT=y
CONFIG_X86_CYCLONE_TIMER=y
# CONFIG_M386 is not set
# CONFIG_M486 is not set
# CONFIG_M586 is not set
# CONFIG_M586TSC is not set
# CONFIG_M586MMX is not set
# CONFIG_M686 is not set
# CONFIG_MPENTIUMII is not set
# CONFIG_MPENTIUMIII is not set
CONFIG_MPENTIUMM=y
# CONFIG_MPENTIUM4 is not set
# CONFIG_MK6 is not set
# CONFIG_MK7 is not set
# CONFIG_MK8 is not set
# CONFIG_MCRUSOE is not set
# CONFIG_MEFFICEON is not set
# CONFIG_MWINCHIPC6 is not set
# CONFIG_MWINCHIP2 is not set
# CONFIG_MWINCHIP3D is not set
# CONFIG_MGEODEGX1 is not set
# CONFIG_MGEODE_LX is not set
# CONFIG_MCYRIXIII is not set
# CONFIG_MVIAC3_2 is not set
# CONFIG_MVIAC7 is not set
# CONFIG_MPSC is not set
# CONFIG_MCORE2 is not set
# CONFIG_GENERIC_CPU is not set
CONFIG_X86_GENERIC=y
CONFIG_X86_CPU=y
CONFIG_X86_CMPXCHG=y
CONFIG_X86_L1_CACHE_SHIFT=7
CONFIG_X86_XADD=y
CONFIG_X86_WP_WORKS_OK=y
CONFIG_X86_INVLPG=y
CONFIG_X86_BSWAP=y
CONFIG_X86_POPAD_OK=y
CONFIG_X86_GOOD_APIC=y
CONFIG_X86_INTEL_USERCOPY=y
CONFIG_X86_USE_PPRO_CHECKSUM=y
CONFIG_X86_TSC=y
CONFIG_X86_CMOV=y
CONFIG_X86_MINIMUM_CPU_FAMILY=4
CONFIG_X86_DEBUGCTLMSR=y
# CONFIG_HPET_TIMER is not set
# CONFIG_DMI is not set
# CONFIG_IOMMU_HELPER is not set
CONFIG_NR_CPUS=32
CONFIG_SCHED_SMT=y
# CONFIG_SCHED_MC is not set
# CONFIG_PREEMPT_NONE is not set
# CONFIG_PREEMPT_VOLUNTARY is not set
CONFIG_PREEMPT=y
# CONFIG_PREEMPT_RCU is not set
CONFIG_X86_LOCAL_APIC=y
CONFIG_X86_IO_APIC=y
CONFIG_X86_MCE=y
# CONFIG_X86_MCE_NONFATAL is not set
CONFIG_X86_MCE_P4THERMAL=y
CONFIG_VM86=y
CONFIG_TOSHIBA=y
CONFIG_I8K=y
# CONFIG_X86_REBOOTFIXUPS is not set
# CONFIG_MICROCODE is not set
CONFIG_X86_MSR=y
CONFIG_X86_CPUID=y
# CONFIG_NOHIGHMEM is not set
CONFIG_HIGHMEM4G=y
# CONFIG_HIGHMEM64G is not set
CONFIG_VMSPLIT_3G=y
# CONFIG_VMSPLIT_3G_OPT is not set
# CONFIG_VMSPLIT_2G is not set
# CONFIG_VMSPLIT_2G_OPT is not set
# CONFIG_VMSPLIT_1G is not set
CONFIG_PAGE_OFFSET=0xC0000000
CONFIG_HIGHMEM=y
CONFIG_ILLEGAL_POINTER_VALUE=0
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_FLATMEM_MANUAL=y
# CONFIG_DISCONTIGMEM_MANUAL is not set
# CONFIG_SPARSEMEM_MANUAL is not set
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
# CONFIG_SPARSEMEM_STATIC is not set
# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
# CONFIG_RESOURCES_64BIT is not set
CONFIG_ZONE_DMA_FLAG=1
CONFIG_VIRT_TO_BUS=y
CONFIG_HIGHPTE=y
CONFIG_MATH_EMULATION=y
CONFIG_MTRR=y
CONFIG_MTRR_SANITIZER=y
CONFIG_MTRR_SANITIZER_ENABLE_DEFAULT=0
CONFIG_MTRR_SANITIZER_SPARE_REG_NR_DEFAULT=1
# CONFIG_X86_PAT is not set
# CONFIG_IRQBALANCE is not set
# CONFIG_SECCOMP is not set
# CONFIG_HZ_100 is not set
CONFIG_HZ_250=y
# CONFIG_HZ_300 is not set
# CONFIG_HZ_1000 is not set
CONFIG_HZ=250
CONFIG_SCHED_HRTICK=y
# CONFIG_KEXEC is not set
# CONFIG_CRASH_DUMP is not set
CONFIG_PHYSICAL_START=0x100000
CONFIG_RELOCATABLE=y
CONFIG_PHYSICAL_ALIGN=0x100000
# CONFIG_HOTPLUG_CPU is not set
CONFIG_COMPAT_VDSO=y
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
#
# Power management options
#
# CONFIG_PM is not set
#
# CPU Frequency scaling
#
# CONFIG_CPU_FREQ is not set
# CONFIG_CPU_IDLE is not set
#
# Bus options (PCI etc.)
#
CONFIG_PCI=y
# CONFIG_PCI_GOBIOS is not set
CONFIG_PCI_GOMMCONFIG=y
# CONFIG_PCI_GODIRECT is not set
# CONFIG_PCI_GOOLPC is not set
# CONFIG_PCI_GOANY is not set
CONFIG_PCI_DOMAINS=y
# CONFIG_PCIEPORTBUS is not set
CONFIG_ARCH_SUPPORTS_MSI=y
CONFIG_PCI_MSI=y
# CONFIG_PCI_LEGACY is not set
# CONFIG_PCI_DEBUG is not set
CONFIG_HT_IRQ=y
CONFIG_ISA_DMA_API=y
# CONFIG_ISA is not set
CONFIG_MCA=y
# CONFIG_MCA_LEGACY is not set
CONFIG_SCx200=y
# CONFIG_SCx200HR_TIMER is not set
# CONFIG_OLPC is not set
# CONFIG_PCCARD is not set
# CONFIG_HOTPLUG_PCI is not set
#
# Executable file formats / Emulations
#
# CONFIG_BINFMT_ELF is not set
# CONFIG_BINFMT_AOUT is not set
# CONFIG_BINFMT_MISC is not set
#
# Networking
#
CONFIG_NET=y
#
# Networking options
#
CONFIG_PACKET=y
CONFIG_PACKET_MMAP=y
CONFIG_UNIX=y
CONFIG_XFRM=y
# CONFIG_XFRM_SUB_POLICY is not set
CONFIG_XFRM_MIGRATE=y
CONFIG_NET_KEY=y
# CONFIG_NET_KEY_MIGRATE is not set
# CONFIG_INET is not set
# CONFIG_NETWORK_SECMARK is not set
# CONFIG_NETFILTER is not set
# CONFIG_ATM is not set
CONFIG_BRIDGE=y
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
CONFIG_LLC=y
CONFIG_LLC2=y
CONFIG_IPX=y
CONFIG_IPX_INTERN=y
CONFIG_ATALK=y
# CONFIG_DEV_APPLETALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_WAN_ROUTER is not set
# CONFIG_NET_SCHED is not set
#
# Network testing
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_HAMRADIO is not set
CONFIG_CAN=y
CONFIG_CAN_RAW=y
# CONFIG_CAN_BCM is not set
#
# CAN Device Drivers
#
# CONFIG_CAN_VCAN is not set
# CONFIG_CAN_DEBUG_DEVICES is not set
CONFIG_IRDA=y
#
# IrDA protocols
#
# CONFIG_IRLAN is not set
# CONFIG_IRCOMM is not set
CONFIG_IRDA_ULTRA=y
#
# IrDA options
#
CONFIG_IRDA_CACHE_LAST_LSAP=y
# CONFIG_IRDA_FAST_RR is not set
CONFIG_IRDA_DEBUG=y
#
# Infrared-port device drivers
#
#
# SIR device drivers
#
CONFIG_IRTTY_SIR=y
#
# Dongle support
#
CONFIG_DONGLE=y
CONFIG_ESI_DONGLE=y
CONFIG_ACTISYS_DONGLE=y
CONFIG_TEKRAM_DONGLE=y
# CONFIG_TOIM3232_DONGLE is not set
# CONFIG_LITELINK_DONGLE is not set
CONFIG_MA600_DONGLE=y
CONFIG_GIRBIL_DONGLE=y
# CONFIG_MCP2120_DONGLE is not set
CONFIG_OLD_BELKIN_DONGLE=y
CONFIG_ACT200L_DONGLE=y
#
# FIR device drivers
#
# CONFIG_NSC_FIR is not set
# CONFIG_WINBOND_FIR is not set
# CONFIG_TOSHIBA_FIR is not set
# CONFIG_SMC_IRCC_FIR is not set
CONFIG_ALI_FIR=y
CONFIG_VLSI_FIR=y
CONFIG_VIA_FIR=y
CONFIG_BT=y
CONFIG_BT_L2CAP=y
# CONFIG_BT_SCO is not set
# CONFIG_BT_RFCOMM is not set
CONFIG_BT_BNEP=y
CONFIG_BT_BNEP_MC_FILTER=y
CONFIG_BT_BNEP_PROTO_FILTER=y
#
# Bluetooth device drivers
#
# CONFIG_BT_HCIUART is not set
# CONFIG_BT_HCIVHCI is not set
#
# Wireless
#
CONFIG_CFG80211=y
# CONFIG_NL80211 is not set
CONFIG_WIRELESS_EXT=y
CONFIG_MAC80211=y
#
# QoS/HT support disabled
#
#
# QoS/HT support needs CONFIG_NET_SCHED
#
#
# Rate control algorithm selection
#
# CONFIG_MAC80211_RC_DEFAULT_PID is not set
CONFIG_MAC80211_RC_DEFAULT_NONE=y
#
# Selecting 'y' for an algorithm will
#
#
# build the algorithm into mac80211.
#
CONFIG_MAC80211_RC_DEFAULT=""
CONFIG_MAC80211_RC_PID=y
# CONFIG_MAC80211_MESH is not set
# CONFIG_MAC80211_LEDS is not set
# CONFIG_MAC80211_DEBUGFS is not set
# CONFIG_MAC80211_DEBUG_PACKET_ALIGNMENT is not set
CONFIG_MAC80211_DEBUG=y
CONFIG_MAC80211_HT_DEBUG=y
CONFIG_MAC80211_VERBOSE_DEBUG=y
CONFIG_MAC80211_LOWTX_FRAME_DUMP=y
CONFIG_TKIP_DEBUG=y
# CONFIG_MAC80211_DEBUG_COUNTERS is not set
CONFIG_MAC80211_IBSS_DEBUG=y
# CONFIG_MAC80211_VERBOSE_PS_DEBUG is not set
CONFIG_IEEE80211=y
CONFIG_IEEE80211_DEBUG=y
CONFIG_IEEE80211_CRYPT_WEP=y
CONFIG_IEEE80211_CRYPT_CCMP=y
CONFIG_IEEE80211_CRYPT_TKIP=y
CONFIG_RFKILL=y
CONFIG_RFKILL_INPUT=y
CONFIG_NET_9P=y
# CONFIG_NET_9P_VIRTIO is not set
CONFIG_NET_9P_DEBUG=y
#
# Device Drivers
#
#
# Generic Driver Options
#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=y
CONFIG_BUILTIN_FIRMWARE=""
CONFIG_DEBUG_DRIVER=y
# CONFIG_DEBUG_DEVRES is not set
# CONFIG_SYS_HYPERVISOR is not set
# CONFIG_CONNECTOR is not set
# CONFIG_MTD is not set
# CONFIG_PARPORT is not set
# CONFIG_MISC_DEVICES is not set
CONFIG_EEPROM_93CX6=y
CONFIG_HAVE_IDE=y
#
# SCSI device support
#
# CONFIG_SCSI_DMA is not set
# CONFIG_SCSI_NETLINK is not set
# CONFIG_FUSION is not set
#
# IEEE 1394 (FireWire) support
#
# CONFIG_FIREWIRE is not set
# CONFIG_IEEE1394 is not set
# CONFIG_I2O is not set
# CONFIG_MACINTOSH_DRIVERS is not set
CONFIG_NETDEVICES=y
CONFIG_NETDEVICES_MULTIQUEUE=y
# CONFIG_DUMMY is not set
CONFIG_MACVLAN=y
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set
# CONFIG_VETH is not set
# CONFIG_ARCNET is not set
# CONFIG_PHYLIB is not set
CONFIG_NET_ETHERNET=y
CONFIG_MII=y
# CONFIG_HAPPYMEAL is not set
CONFIG_SUNGEM=y
# CONFIG_CASSINI is not set
CONFIG_NET_VENDOR_3COM=y
CONFIG_EL3=y
CONFIG_VORTEX=y
CONFIG_TYPHOON=y
# CONFIG_NET_VENDOR_SMC is not set
CONFIG_NET_TULIP=y
# CONFIG_DE2104X is not set
# CONFIG_TULIP is not set
# CONFIG_DE4X5 is not set
# CONFIG_WINBOND_840 is not set
# CONFIG_DM9102 is not set
CONFIG_ULI526X=y
# CONFIG_DEPCA is not set
# CONFIG_HP100 is not set
CONFIG_IBMLANA=y
# CONFIG_IBM_NEW_EMAC_ZMII is not set
# CONFIG_IBM_NEW_EMAC_RGMII is not set
# CONFIG_IBM_NEW_EMAC_TAH is not set
# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
CONFIG_NET_PCI=y
# CONFIG_PCNET32 is not set
# CONFIG_AMD8111_ETH is not set
CONFIG_ADAPTEC_STARFIRE=y
# CONFIG_ADAPTEC_STARFIRE_NAPI is not set
# CONFIG_B44 is not set
# CONFIG_FORCEDETH is not set
CONFIG_EEPRO100=y
# CONFIG_E100 is not set
# CONFIG_FEALNX is not set
# CONFIG_NATSEMI is not set
# CONFIG_NE2K_PCI is not set
# CONFIG_8139CP is not set
CONFIG_8139TOO=y
# CONFIG_8139TOO_PIO is not set
CONFIG_8139TOO_TUNE_TWISTER=y
CONFIG_8139TOO_8129=y
# CONFIG_8139_OLD_RX_RESET is not set
CONFIG_R6040=y
# CONFIG_SIS900 is not set
CONFIG_EPIC100=y
# CONFIG_SUNDANCE is not set
# CONFIG_TLAN is not set
# CONFIG_VIA_RHINE is not set
CONFIG_SC92031=y
CONFIG_NETDEV_1000=y
CONFIG_ACENIC=y
CONFIG_ACENIC_OMIT_TIGON_I=y
# CONFIG_DL2K is not set
CONFIG_E1000=y
# CONFIG_E1000_NAPI is not set
# CONFIG_E1000_DISABLE_PACKET_SPLIT is not set
# CONFIG_E1000E is not set
# CONFIG_E1000E_ENABLED is not set
# CONFIG_IP1000 is not set
CONFIG_IGB=y
# CONFIG_NS83820 is not set
CONFIG_HAMACHI=y
CONFIG_YELLOWFIN=y
CONFIG_R8169=y
# CONFIG_R8169_NAPI is not set
# CONFIG_SIS190 is not set
# CONFIG_SKGE is not set
CONFIG_SKY2=y
# CONFIG_SKY2_DEBUG is not set
CONFIG_VIA_VELOCITY=y
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
# CONFIG_QLA3XXX is not set
CONFIG_ATL1=y
# CONFIG_NETDEV_10000 is not set
# CONFIG_TR is not set
#
# Wireless LAN
#
CONFIG_WLAN_PRE80211=y
CONFIG_WLAN_80211=y
CONFIG_IPW2100=y
CONFIG_IPW2100_MONITOR=y
CONFIG_IPW2100_DEBUG=y
# CONFIG_IPW2200 is not set
# CONFIG_LIBERTAS is not set
CONFIG_AIRO=y
CONFIG_HERMES=y
# CONFIG_PLX_HERMES is not set
CONFIG_TMD_HERMES=y
CONFIG_NORTEL_HERMES=y
# CONFIG_PCI_HERMES is not set
CONFIG_ATMEL=y
CONFIG_PCI_ATMEL=y
CONFIG_PRISM54=y
# CONFIG_RTL8180 is not set
# CONFIG_ADM8211 is not set
CONFIG_P54_COMMON=y
CONFIG_P54_PCI=y
# CONFIG_ATH5K is not set
CONFIG_IWLWIFI=y
CONFIG_IWLCORE=y
# CONFIG_IWLWIFI_LEDS is not set
# CONFIG_IWLWIFI_RUN_TIME_CALIB is not set
CONFIG_IWLWIFI_RFKILL=y
# CONFIG_IWL4965 is not set
# CONFIG_IWL3945 is not set
CONFIG_HOSTAP=y
CONFIG_HOSTAP_FIRMWARE=y
CONFIG_HOSTAP_FIRMWARE_NVRAM=y
# CONFIG_HOSTAP_PLX is not set
CONFIG_HOSTAP_PCI=y
# CONFIG_B43 is not set
# CONFIG_B43LEGACY is not set
CONFIG_RT2X00=y
CONFIG_RT2X00_LIB=y
CONFIG_RT2X00_LIB_PCI=y
CONFIG_RT2X00_LIB_FIRMWARE=y
CONFIG_RT2X00_LIB_RFKILL=y
CONFIG_RT2X00_LIB_LEDS=y
CONFIG_RT2400PCI=y
CONFIG_RT2400PCI_RFKILL=y
# CONFIG_RT2400PCI_LEDS is not set
# CONFIG_RT2500PCI is not set
CONFIG_RT61PCI=y
CONFIG_RT61PCI_RFKILL=y
CONFIG_RT61PCI_LEDS=y
CONFIG_RT2X00_DEBUG=y
# CONFIG_WAN is not set
CONFIG_FDDI=y
# CONFIG_DEFXX is not set
CONFIG_SKFP=y
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
# CONFIG_VIRTIO_NET is not set
# CONFIG_ISDN is not set
# CONFIG_PHONE is not set
#
# Input device support
#
# CONFIG_INPUT is not set
CONFIG_INPUT_POLLDEV=y
#
# Hardware I/O ports
#
CONFIG_SERIO=y
# CONFIG_SERIO_I8042 is not set
CONFIG_SERIO_SERPORT=y
# CONFIG_SERIO_CT82C710 is not set
CONFIG_SERIO_PCIPS2=y
# CONFIG_SERIO_LIBPS2 is not set
# CONFIG_SERIO_RAW is not set
CONFIG_GAMEPORT=y
# CONFIG_GAMEPORT_NS558 is not set
# CONFIG_GAMEPORT_L4 is not set
CONFIG_GAMEPORT_EMU10K1=y
# CONFIG_GAMEPORT_FM801 is not set
#
# Character devices
#
# CONFIG_VT is not set
# CONFIG_DEVKMEM is not set
CONFIG_SERIAL_NONSTANDARD=y
CONFIG_COMPUTONE=y
# CONFIG_ROCKETPORT is not set
CONFIG_CYCLADES=y
CONFIG_CYZ_INTR=y
# CONFIG_DIGIEPCA is not set
CONFIG_MOXA_INTELLIO=y
CONFIG_MOXA_SMARTIO=y
# CONFIG_ISI is not set
CONFIG_SYNCLINK=y
# CONFIG_SYNCLINKMP is not set
# CONFIG_SYNCLINK_GT is not set
# CONFIG_N_HDLC is not set
# CONFIG_RISCOM8 is not set
# CONFIG_SPECIALIX is not set
CONFIG_SX=y
# CONFIG_RIO is not set
CONFIG_STALDRV=y
CONFIG_NOZOMI=y
#
# Serial drivers
#
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_FIX_EARLYCON_MEM=y
# CONFIG_SERIAL_8250_PCI is not set
CONFIG_SERIAL_8250_NR_UARTS=4
CONFIG_SERIAL_8250_RUNTIME_UARTS=4
CONFIG_SERIAL_8250_EXTENDED=y
CONFIG_SERIAL_8250_MANY_PORTS=y
# CONFIG_SERIAL_8250_SHARE_IRQ is not set
# CONFIG_SERIAL_8250_DETECT_IRQ is not set
CONFIG_SERIAL_8250_RSA=y
CONFIG_SERIAL_8250_MCA=y
#
# Non-8250 serial port support
#
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_JSM is not set
# CONFIG_UNIX98_PTYS is not set
# CONFIG_LEGACY_PTYS is not set
CONFIG_HVC_DRIVER=y
CONFIG_VIRTIO_CONSOLE=y
# CONFIG_IPMI_HANDLER is not set
CONFIG_HW_RANDOM=y
CONFIG_HW_RANDOM_INTEL=y
# CONFIG_HW_RANDOM_AMD is not set
CONFIG_HW_RANDOM_GEODE=y
# CONFIG_HW_RANDOM_VIA is not set
CONFIG_HW_RANDOM_VIRTIO=y
CONFIG_NVRAM=y
# CONFIG_RTC is not set
# CONFIG_GEN_RTC is not set
CONFIG_R3964=y
CONFIG_APPLICOM=y
CONFIG_MWAVE=y
CONFIG_SCx200_GPIO=y
CONFIG_PC8736x_GPIO=y
CONFIG_NSC_GPIO=y
CONFIG_CS5535_GPIO=y
# CONFIG_HANGCHECK_TIMER is not set
# CONFIG_TCG_TPM is not set
# CONFIG_TELCLOCK is not set
CONFIG_DEVPORT=y
CONFIG_I2C=y
CONFIG_I2C_BOARDINFO=y
CONFIG_I2C_CHARDEV=y
#
# I2C Hardware Bus support
#
#
# PC SMBus host controller drivers
#
# CONFIG_I2C_ALI1535 is not set
# CONFIG_I2C_ALI1563 is not set
# CONFIG_I2C_ALI15X3 is not set
CONFIG_I2C_AMD756=y
# CONFIG_I2C_AMD756_S4882 is not set
# CONFIG_I2C_AMD8111 is not set
CONFIG_I2C_I801=y
# CONFIG_I2C_PIIX4 is not set
CONFIG_I2C_NFORCE2=y
# CONFIG_I2C_NFORCE2_S4985 is not set
# CONFIG_I2C_SIS5595 is not set
CONFIG_I2C_SIS630=y
# CONFIG_I2C_SIS96X is not set
# CONFIG_I2C_VIA is not set
# CONFIG_I2C_VIAPRO is not set
#
# Graphics adapter I2C/DDC channel drivers
#
# CONFIG_I2C_VOODOO3 is not set
#
# External I2C/SMBus adapter drivers
#
# CONFIG_I2C_PARPORT_LIGHT is not set
CONFIG_I2C_TAOS_EVM=y
#
# Other I2C/SMBus bus drivers
#
# CONFIG_I2C_ISCH is not set
# CONFIG_I2C_OCORES is not set
# CONFIG_I2C_SIMTEC is not set
# CONFIG_SCx200_I2C is not set
# CONFIG_SCx200_ACB is not set
# CONFIG_I2C_PCA_PLATFORM is not set
#
# Miscellaneous I2C Chip support
#
# CONFIG_DS1682 is not set
CONFIG_SENSORS_EEPROM=y
CONFIG_SENSORS_PCF8574=y
CONFIG_PCF8575=y
CONFIG_SENSORS_PCF8591=y
# CONFIG_SENSORS_MAX6875 is not set
CONFIG_SENSORS_TSL2550=y
# CONFIG_I2C_DEBUG_CORE is not set
CONFIG_I2C_DEBUG_ALGO=y
# CONFIG_I2C_DEBUG_BUS is not set
CONFIG_I2C_DEBUG_CHIP=y
# CONFIG_SPI is not set
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
# CONFIG_THERMAL is not set
# CONFIG_WATCHDOG is not set
#
# Sonics Silicon Backplane
#
CONFIG_SSB_POSSIBLE=y
# CONFIG_SSB is not set
#
# Multifunction device drivers
#
CONFIG_MFD_SM501=y
CONFIG_HTC_PASIC3=y
#
# Multimedia devices
#
#
# Multimedia core support
#
# CONFIG_VIDEO_DEV is not set
# CONFIG_VIDEO_MEDIA is not set
#
# Multimedia drivers
#
CONFIG_DAB=y
#
# Graphics support
#
# CONFIG_AGP is not set
# CONFIG_DRM is not set
# CONFIG_VGASTATE is not set
# CONFIG_VIDEO_OUTPUT_CONTROL is not set
# CONFIG_FB is not set
CONFIG_BACKLIGHT_LCD_SUPPORT=y
CONFIG_LCD_CLASS_DEVICE=y
# CONFIG_BACKLIGHT_CLASS_DEVICE is not set
#
# Display device support
#
# CONFIG_DISPLAY_SUPPORT is not set
# CONFIG_SOUND is not set
CONFIG_USB_SUPPORT=y
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
CONFIG_USB_ARCH_HAS_EHCI=y
# CONFIG_USB is not set
CONFIG_USB_OTG_WHITELIST=y
# CONFIG_USB_OTG_BLACKLIST_HUB is not set
#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
#
# CONFIG_USB_GADGET is not set
# CONFIG_UWB is not set
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
CONFIG_LEDS_CLASS=y
# CONFIG_ACCESSIBILITY is not set
# CONFIG_INFINIBAND is not set
# CONFIG_EDAC is not set
# CONFIG_RTC_CLASS is not set
# CONFIG_DMADEVICES is not set
# CONFIG_UIO is not set
#
# Firmware Drivers
#
# CONFIG_EDD is not set
CONFIG_DELL_RBU=y
CONFIG_DCDBAS=y
CONFIG_ISCSI_IBFT_FIND=y
CONFIG_ISCSI_IBFT=y
#
# File systems
#
CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
# CONFIG_INOTIFY_USER is not set
CONFIG_QUOTA=y
# CONFIG_QUOTA_NETLINK_INTERFACE is not set
# CONFIG_PRINT_QUOTA_WARNING is not set
# CONFIG_QFMT_V1 is not set
# CONFIG_QFMT_V2 is not set
CONFIG_QUOTACTL=y
CONFIG_AUTOFS_FS=y
CONFIG_AUTOFS4_FS=y
CONFIG_FUSE_FS=y
#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
# CONFIG_PROC_KCORE is not set
CONFIG_PROC_SYSCTL=y
# CONFIG_SYSFS is not set
# CONFIG_TMPFS is not set
# CONFIG_HUGETLBFS is not set
# CONFIG_HUGETLB_PAGE is not set
#
# Miscellaneous filesystems
#
CONFIG_ECRYPT_FS=y
# CONFIG_NETWORK_FILESYSTEMS is not set
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="iso8859-1"
CONFIG_NLS_CODEPAGE_437=y
CONFIG_NLS_CODEPAGE_737=y
CONFIG_NLS_CODEPAGE_775=y
CONFIG_NLS_CODEPAGE_850=y
# CONFIG_NLS_CODEPAGE_852 is not set
CONFIG_NLS_CODEPAGE_855=y
CONFIG_NLS_CODEPAGE_857=y
# CONFIG_NLS_CODEPAGE_860 is not set
CONFIG_NLS_CODEPAGE_861=y
CONFIG_NLS_CODEPAGE_862=y
# CONFIG_NLS_CODEPAGE_863 is not set
# CONFIG_NLS_CODEPAGE_864 is not set
# CONFIG_NLS_CODEPAGE_865 is not set
CONFIG_NLS_CODEPAGE_866=y
# CONFIG_NLS_CODEPAGE_869 is not set
CONFIG_NLS_CODEPAGE_936=y
# CONFIG_NLS_CODEPAGE_950 is not set
CONFIG_NLS_CODEPAGE_932=y
CONFIG_NLS_CODEPAGE_949=y
CONFIG_NLS_CODEPAGE_874=y
CONFIG_NLS_ISO8859_8=y
# CONFIG_NLS_CODEPAGE_1250 is not set
CONFIG_NLS_CODEPAGE_1251=y
CONFIG_NLS_ASCII=y
# CONFIG_NLS_ISO8859_1 is not set
CONFIG_NLS_ISO8859_2=y
# CONFIG_NLS_ISO8859_3 is not set
CONFIG_NLS_ISO8859_4=y
# CONFIG_NLS_ISO8859_5 is not set
CONFIG_NLS_ISO8859_6=y
CONFIG_NLS_ISO8859_7=y
# CONFIG_NLS_ISO8859_9 is not set
CONFIG_NLS_ISO8859_13=y
CONFIG_NLS_ISO8859_14=y
CONFIG_NLS_ISO8859_15=y
# CONFIG_NLS_KOI8_R is not set
# CONFIG_NLS_KOI8_U is not set
CONFIG_NLS_UTF8=y
#
# Kernel hacking
#
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_ENABLE_WARN_DEPRECATED=y
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_FRAME_WARN=1024
# CONFIG_MAGIC_SYSRQ is not set
# CONFIG_UNUSED_SYMBOLS is not set
CONFIG_DEBUG_FS=y
CONFIG_HEADERS_CHECK=y
CONFIG_DEBUG_KERNEL=y
# CONFIG_DEBUG_SHIRQ is not set
# CONFIG_DETECT_SOFTLOCKUP is not set
# CONFIG_SCHED_DEBUG is not set
# CONFIG_SCHEDSTATS is not set
CONFIG_TIMER_STATS=y
CONFIG_DEBUG_OBJECTS=y
# CONFIG_DEBUG_OBJECTS_SELFTEST is not set
# CONFIG_DEBUG_OBJECTS_FREE is not set
# CONFIG_DEBUG_OBJECTS_TIMERS is not set
# CONFIG_DEBUG_PREEMPT is not set
# CONFIG_DEBUG_RT_MUTEXES is not set
# CONFIG_DEBUG_SPINLOCK is not set
CONFIG_DEBUG_MUTEXES=y
# CONFIG_DEBUG_LOCK_ALLOC is not set
# CONFIG_PROVE_LOCKING is not set
# CONFIG_LOCK_STAT is not set
CONFIG_TRACE_IRQFLAGS=y
CONFIG_DEBUG_SPINLOCK_SLEEP=y
CONFIG_STACKTRACE=y
CONFIG_DEBUG_KOBJECT=y
CONFIG_DEBUG_HIGHMEM=y
CONFIG_DEBUG_BUGVERBOSE=y
# CONFIG_DEBUG_INFO is not set
# CONFIG_DEBUG_VM is not set
# CONFIG_DEBUG_WRITECOUNT is not set
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
CONFIG_FRAME_POINTER=y
# CONFIG_FAULT_INJECTION is not set
# CONFIG_LATENCYTOP is not set
CONFIG_HAVE_FTRACE=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_TRACER_MAX_TRACE=y
CONFIG_TRACING=y
CONFIG_FTRACE=y
CONFIG_IRQSOFF_TRACER=y
CONFIG_PREEMPT_TRACER=y
CONFIG_SYSPROF_TRACER=y
# CONFIG_SCHED_TRACER is not set
CONFIG_CONTEXT_SWITCH_TRACER=y
# CONFIG_DYNAMIC_FTRACE is not set
CONFIG_FTRACE_SELFTEST=y
CONFIG_FTRACE_STARTUP_TEST=y
CONFIG_PROVIDE_OHCI1394_DMA_INIT=y
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
# CONFIG_KERNEL_TESTS is not set
CONFIG_NONPROMISC_DEVMEM=y
# CONFIG_EARLY_PRINTK is not set
CONFIG_DEBUG_STACKOVERFLOW=y
# CONFIG_DEBUG_STACK_USAGE is not set
CONFIG_DEBUG_PAGEALLOC=y
CONFIG_DEBUG_PER_CPU_MAPS=y
# CONFIG_X86_PTDUMP is not set
CONFIG_DEBUG_RODATA=y
CONFIG_DEBUG_RODATA_TEST=y
# CONFIG_4KSTACKS is not set
CONFIG_X86_FIND_SMP_CONFIG=y
CONFIG_X86_MPPARSE=y
# CONFIG_DOUBLEFAULT is not set
CONFIG_MMIOTRACE_HOOKS=y
CONFIG_MMIOTRACE=y
CONFIG_IO_DELAY_TYPE_0X80=0
CONFIG_IO_DELAY_TYPE_0XED=1
CONFIG_IO_DELAY_TYPE_UDELAY=2
CONFIG_IO_DELAY_TYPE_NONE=3
# CONFIG_IO_DELAY_0X80 is not set
CONFIG_IO_DELAY_0XED=y
# CONFIG_IO_DELAY_UDELAY is not set
# CONFIG_IO_DELAY_NONE is not set
CONFIG_DEFAULT_IO_DELAY_TYPE=1
CONFIG_DEBUG_BOOT_PARAMS=y
# CONFIG_CPA_DEBUG is not set
#
# Security options
#
CONFIG_KEYS=y
CONFIG_KEYS_DEBUG_PROC_KEYS=y
# CONFIG_SECURITY_FILE_CAPABILITIES is not set
CONFIG_CRYPTO=y
#
# Crypto core or helper
#
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_AEAD=y
CONFIG_CRYPTO_BLKCIPHER=y
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_GF128MUL=y
CONFIG_CRYPTO_NULL=y
# CONFIG_CRYPTO_CRYPTD is not set
# CONFIG_CRYPTO_AUTHENC is not set
#
# Authenticated Encryption with Associated Data
#
CONFIG_CRYPTO_CCM=y
# CONFIG_CRYPTO_GCM is not set
CONFIG_CRYPTO_SEQIV=y
#
# Block modes
#
# CONFIG_CRYPTO_CBC is not set
CONFIG_CRYPTO_CTR=y
# CONFIG_CRYPTO_CTS is not set
CONFIG_CRYPTO_ECB=y
CONFIG_CRYPTO_LRW=y
# CONFIG_CRYPTO_PCBC is not set
CONFIG_CRYPTO_XTS=y
#
# Hash modes
#
# CONFIG_CRYPTO_HMAC is not set
# CONFIG_CRYPTO_XCBC is not set
#
# Digest
#
CONFIG_CRYPTO_CRC32C=y
# CONFIG_CRYPTO_MD4 is not set
CONFIG_CRYPTO_MD5=y
CONFIG_CRYPTO_MICHAEL_MIC=y
# CONFIG_CRYPTO_RMD128 is not set
# CONFIG_CRYPTO_RMD160 is not set
CONFIG_CRYPTO_RMD256=y
# CONFIG_CRYPTO_RMD320 is not set
# CONFIG_CRYPTO_SHA1 is not set
# CONFIG_CRYPTO_SHA256 is not set
CONFIG_CRYPTO_SHA512=y
# CONFIG_CRYPTO_TGR192 is not set
# CONFIG_CRYPTO_WP512 is not set
#
# Ciphers
#
CONFIG_CRYPTO_AES=y
# CONFIG_CRYPTO_AES_586 is not set
# CONFIG_CRYPTO_ANUBIS is not set
CONFIG_CRYPTO_ARC4=y
CONFIG_CRYPTO_BLOWFISH=y
# CONFIG_CRYPTO_CAMELLIA is not set
# CONFIG_CRYPTO_CAST5 is not set
CONFIG_CRYPTO_CAST6=y
# CONFIG_CRYPTO_DES is not set
CONFIG_CRYPTO_FCRYPT=y
# CONFIG_CRYPTO_KHAZAD is not set
CONFIG_CRYPTO_SALSA20=y
# CONFIG_CRYPTO_SALSA20_586 is not set
CONFIG_CRYPTO_SEED=y
# CONFIG_CRYPTO_SERPENT is not set
CONFIG_CRYPTO_TEA=y
CONFIG_CRYPTO_TWOFISH=y
CONFIG_CRYPTO_TWOFISH_COMMON=y
# CONFIG_CRYPTO_TWOFISH_586 is not set
#
# Compression
#
CONFIG_CRYPTO_DEFLATE=y
CONFIG_CRYPTO_LZO=y
# CONFIG_CRYPTO_HW is not set
CONFIG_HAVE_KVM=y
# CONFIG_VIRTUALIZATION is not set
CONFIG_VIRTIO=y
CONFIG_VIRTIO_RING=y
#
# Library routines
#
CONFIG_BITREVERSE=y
CONFIG_GENERIC_FIND_FIRST_BIT=y
CONFIG_GENERIC_FIND_NEXT_BIT=y
CONFIG_CRC_CCITT=y
CONFIG_CRC16=y
CONFIG_CRC_ITU_T=y
CONFIG_CRC32=y
# CONFIG_CRC7 is not set
CONFIG_LIBCRC32C=y
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=y
CONFIG_LZO_COMPRESS=y
CONFIG_LZO_DECOMPRESS=y
CONFIG_PLIST=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
^ permalink raw reply [flat|nested] 11+ messages in thread* Re: [Rt2400-devel] next-20080611 rt2x00: build failure 2008-06-11 17:07 next-20080611 rt2x00: build failure Randy Dunlap @ 2008-06-11 17:48 ` Ivo van Doorn 2008-06-11 17:46 ` Randy Dunlap [not found] ` <20080611100748.d35829f4.randy.dunlap-QHcLZuEGTsvQT0dZR+AlfA@public.gmane.org> 1 sibling, 1 reply; 11+ messages in thread From: Ivo van Doorn @ 2008-06-11 17:48 UTC (permalink / raw) To: rt2400-devel; +Cc: Randy Dunlap, linux-next, linux-wireless > when CONFIG_INPUT=n and > # CONFIG_NEW_LEDS is not set > CONFIG_LEDS_CLASS=y Does below patch help? --- diff --git a/drivers/net/wireless/rt2x00/Kconfig b/drivers/net/wireless/rt2x00/Kconfig index 0ace761..c4d1f67 100644 --- a/drivers/net/wireless/rt2x00/Kconfig +++ b/drivers/net/wireless/rt2x00/Kconfig @@ -36,6 +36,7 @@ config RT2X00_LIB_FIRMWARE config RT2X00_LIB_RFKILL boolean depends on RT2X00_LIB + depends on INPUT select RFKILL select INPUT_POLLDEV ^ permalink raw reply related [flat|nested] 11+ messages in thread
* Re: [Rt2400-devel] next-20080611 rt2x00: build failure 2008-06-11 17:48 ` [Rt2400-devel] " Ivo van Doorn @ 2008-06-11 17:46 ` Randy Dunlap [not found] ` <32664704.1213206386295.JavaMail.oracle-s5rVz5nKm9nKpDp+h9PlwkEOCMrvLtNR@public.gmane.org> 0 siblings, 1 reply; 11+ messages in thread From: Randy Dunlap @ 2008-06-11 17:46 UTC (permalink / raw) To: rt2400-devel, Ivo van Doorn; +Cc: linux-wireless, linux-next --- Original Message --- > > when CONFIG_INPUT=n and > > # CONFIG_NEW_LEDS is not set > > CONFIG_LEDS_CLASS=y > > Does below patch help? Nope, sorry, same build errors. > --- > diff --git a/drivers/net/wireless/rt2x00/Kconfig > b/drivers/net/wireless/rt2x00/Kconfig > index 0ace761..c4d1f67 100644 > --- a/drivers/net/wireless/rt2x00/Kconfig > +++ b/drivers/net/wireless/rt2x00/Kconfig > @@ -36,6 +36,7 @@ config RT2X00_LIB_FIRMWARE > config RT2X00_LIB_RFKILL > boolean > depends on RT2X00_LIB > + depends on INPUT > select RFKILL > select INPUT_POLLDEV > ^ permalink raw reply [flat|nested] 11+ messages in thread
[parent not found: <32664704.1213206386295.JavaMail.oracle-s5rVz5nKm9nKpDp+h9PlwkEOCMrvLtNR@public.gmane.org>]
* Re: [Rt2400-devel] next-20080611 rt2x00: build failure [not found] ` <32664704.1213206386295.JavaMail.oracle-s5rVz5nKm9nKpDp+h9PlwkEOCMrvLtNR@public.gmane.org> @ 2008-06-11 18:21 ` Ivo van Doorn 0 siblings, 0 replies; 11+ messages in thread From: Ivo van Doorn @ 2008-06-11 18:21 UTC (permalink / raw) To: Randy Dunlap Cc: rt2400-devel-5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f, linux-wireless-u79uwXL29TY76Z2rM5mHXA, linux-next-u79uwXL29TY76Z2rM5mHXA On Wednesday 11 June 2008, Randy Dunlap wrote: > --- Original Message --- > > > when CONFIG_INPUT=n and > > > # CONFIG_NEW_LEDS is not set > > > CONFIG_LEDS_CLASS=y > > > > Does below patch help? > > Nope, sorry, same build errors. Ok this is odd, there is something very strange happening, the relevant options in your config are: CONFIG_RFKILL=y CONFIG_RFKILL_INPUT=y # CONFIG_INPUT is not set CONFIG_INPUT_POLLDEV=y CONFIG_RT2X00_LIB_RFKILL=y >From net/rfkill/Kconfig: config RFKILL_INPUT tristate "Input layer to RF switch connector" depends on RFKILL && INPUT So RFKILL_INPUT shouldn't not be enabled because it has a clear dependency on the CONFIG_INPUT option. >From drivers/net/wireless/rt2x00/Kconfig config RT2X00_LIB_RFKILL boolean depends on RT2X00_LIB select RFKILL select INPUT_POLLDEV This doesn't mean that the rt2x00 behavior of selecting CONFIG_INPUT_POLLDEV without dependencies on CONFIG_INPUT was correct. But more that there is a secondary bug elsewhere as well, and that is the one which is causing the build failure now.. :S Anybody with additional ideas? :) Ivo -- To unsubscribe from this list: send the line "unsubscribe linux-wireless" in the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org More majordomo info at http://vger.kernel.org/majordomo-info.html ^ permalink raw reply [flat|nested] 11+ messages in thread
[parent not found: <20080611100748.d35829f4.randy.dunlap-QHcLZuEGTsvQT0dZR+AlfA@public.gmane.org>]
* Re: next-20080611 rt2x00: build failure [not found] ` <20080611100748.d35829f4.randy.dunlap-QHcLZuEGTsvQT0dZR+AlfA@public.gmane.org> @ 2008-06-11 18:10 ` John W. Linville 2008-06-11 19:03 ` [Rt2400-devel] " Ivo van Doorn 0 siblings, 1 reply; 11+ messages in thread From: John W. Linville @ 2008-06-11 18:10 UTC (permalink / raw) To: Randy Dunlap Cc: linux-next-u79uwXL29TY76Z2rM5mHXA, linux-wireless-u79uwXL29TY76Z2rM5mHXA, rt2400-devel-5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f On Wed, Jun 11, 2008 at 10:07:48AM -0700, Randy Dunlap wrote: > when CONFIG_INPUT=n and > # CONFIG_NEW_LEDS is not set > CONFIG_LEDS_CLASS=y > > (full config attached) > > vmlinux.o: In function `iwl_rfkill_unregister': > (.text+0x174cdc): undefined reference to `input_unregister_device' > vmlinux.o: In function `iwl_rfkill_init': > (.text+0x174d9f): undefined reference to `input_allocate_device' > vmlinux.o: In function `iwl_rfkill_init': > (.text+0x174e2d): undefined reference to `input_register_device' > vmlinux.o: In function `iwl_rfkill_init': > (.text+0x174e53): undefined reference to `input_free_device' > vmlinux.o: In function `rt2x00rfkill_allocate_polldev': > rt2x00rfkill.c:(.text+0x176dc4): undefined reference to `input_allocate_polled_device' > vmlinux.o: In function `rt2x00rfkill_poll': > rt2x00rfkill.c:(.text+0x176e8b): undefined reference to `input_event' > rt2x00rfkill.c:(.text+0x176e9f): undefined reference to `input_event' <snip> Ick, what a mess... So what combination of depends and select of INPUT, INPUT_POLLDEV, and RFKILL_INPUT do we need to resolve this? -- John W. Linville linville-2XuSBdqkA4R54TAoqtyWWQ@public.gmane.org -- To unsubscribe from this list: send the line "unsubscribe linux-wireless" in the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org More majordomo info at http://vger.kernel.org/majordomo-info.html ^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: [Rt2400-devel] next-20080611 rt2x00: build failure 2008-06-11 18:10 ` John W. Linville @ 2008-06-11 19:03 ` Ivo van Doorn 2008-06-11 19:32 ` Randy Dunlap 0 siblings, 1 reply; 11+ messages in thread From: Ivo van Doorn @ 2008-06-11 19:03 UTC (permalink / raw) To: rt2400-devel; +Cc: John W. Linville, Randy Dunlap, linux-next, linux-wireless On Wednesday 11 June 2008, John W. Linville wrote: > On Wed, Jun 11, 2008 at 10:07:48AM -0700, Randy Dunlap wrote: > > when CONFIG_INPUT=n and > > # CONFIG_NEW_LEDS is not set > > CONFIG_LEDS_CLASS=y > > > > (full config attached) > > > > vmlinux.o: In function `iwl_rfkill_unregister': > > (.text+0x174cdc): undefined reference to `input_unregister_device' > > vmlinux.o: In function `iwl_rfkill_init': > > (.text+0x174d9f): undefined reference to `input_allocate_device' > > vmlinux.o: In function `iwl_rfkill_init': > > (.text+0x174e2d): undefined reference to `input_register_device' > > vmlinux.o: In function `iwl_rfkill_init': > > (.text+0x174e53): undefined reference to `input_free_device' > > vmlinux.o: In function `rt2x00rfkill_allocate_polldev': > > rt2x00rfkill.c:(.text+0x176dc4): undefined reference to `input_allocate_polled_device' > > vmlinux.o: In function `rt2x00rfkill_poll': > > rt2x00rfkill.c:(.text+0x176e8b): undefined reference to `input_event' > > rt2x00rfkill.c:(.text+0x176e9f): undefined reference to `input_event' > > <snip> > > Ick, what a mess... > > So what combination of depends and select of INPUT, INPUT_POLLDEV, > and RFKILL_INPUT do we need to resolve this? Well RFKILL_INPUT shouldn't be selected by a driver, in fact any driver that selects or depends on RFKILL_INPUT is wrong. But selecting it only makes matters worse since that will bypass the INPUT dependency. When INPUT_POLLDEV is required I guess it is best to depend on INPUT and select INPUT_POLLDEV. iwlwifi is selecting RFKILL_INPUT and preferably they should drop the select altogether (not replacing it with a depend), but since I am not sure about the reason for the select rt2x00 is selecting INPUT_POLLDEV but should depend on INPUT first (as done in the patch in my previous mail). b43 shouldn't really depend on RFKILL_INPUT but their Kconfig is correct and shouldn't cause the above build failure. Ivo ^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: [Rt2400-devel] next-20080611 rt2x00: build failure 2008-06-11 19:03 ` [Rt2400-devel] " Ivo van Doorn @ 2008-06-11 19:32 ` Randy Dunlap [not found] ` <20080611123245.4089f47b.randy.dunlap-QHcLZuEGTsvQT0dZR+AlfA@public.gmane.org> 0 siblings, 1 reply; 11+ messages in thread From: Randy Dunlap @ 2008-06-11 19:32 UTC (permalink / raw) To: Ivo van Doorn; +Cc: rt2400-devel, John W. Linville, linux-next, linux-wireless On Wed, 11 Jun 2008 21:03:58 +0200 Ivo van Doorn wrote: > On Wednesday 11 June 2008, John W. Linville wrote: > > On Wed, Jun 11, 2008 at 10:07:48AM -0700, Randy Dunlap wrote: > > > when CONFIG_INPUT=n and > > > # CONFIG_NEW_LEDS is not set > > > CONFIG_LEDS_CLASS=y > > > > > > (full config attached) > > > > > > vmlinux.o: In function `iwl_rfkill_unregister': > > > (.text+0x174cdc): undefined reference to `input_unregister_device' > > > vmlinux.o: In function `iwl_rfkill_init': > > > (.text+0x174d9f): undefined reference to `input_allocate_device' > > > vmlinux.o: In function `iwl_rfkill_init': > > > (.text+0x174e2d): undefined reference to `input_register_device' > > > vmlinux.o: In function `iwl_rfkill_init': > > > (.text+0x174e53): undefined reference to `input_free_device' > > > vmlinux.o: In function `rt2x00rfkill_allocate_polldev': > > > rt2x00rfkill.c:(.text+0x176dc4): undefined reference to `input_allocate_polled_device' > > > vmlinux.o: In function `rt2x00rfkill_poll': > > > rt2x00rfkill.c:(.text+0x176e8b): undefined reference to `input_event' > > > rt2x00rfkill.c:(.text+0x176e9f): undefined reference to `input_event' > > > > <snip> > > > > Ick, what a mess... > > > > So what combination of depends and select of INPUT, INPUT_POLLDEV, > > and RFKILL_INPUT do we need to resolve this? > > Well RFKILL_INPUT shouldn't be selected by a driver, in fact any driver that > selects or depends on RFKILL_INPUT is wrong. But selecting it only makes > matters worse since that will bypass the INPUT dependency. > When INPUT_POLLDEV is required I guess it is best to depend on INPUT and > select INPUT_POLLDEV. > > iwlwifi is selecting RFKILL_INPUT and preferably they should drop the select > altogether (not replacing it with a depend), but since I am not sure about the > reason for the select Yes, that easily causes a build failure. > rt2x00 is selecting INPUT_POLLDEV but should depend on INPUT first (as done > in the patch in my previous mail). > > b43 shouldn't really depend on RFKILL_INPUT but their Kconfig is correct and > shouldn't cause the above build failure. Patch below fixes the RFKILL/INPUT build problems for me. I haven't addresses the leds_* build problems yet. From: Randy Dunlap <randy.dunlap@oracle.com> Config symbols that select RFKILL need to depend on INPUT so that undefined symbols are not used in the build. This patch fixes the input_* symbols build errors. (.text+0x174cdc): undefined reference to `input_unregister_device' (.text+0x174d9f): undefined reference to `input_allocate_device' (.text+0x174e2d): undefined reference to `input_register_device' (.text+0x174e53): undefined reference to `input_free_device' rt2x00rfkill.c:(.text+0x176dc4): undefined reference to `input_allocate_polled_device' rt2x00rfkill.c:(.text+0x176e8b): undefined reference to `input_event' rt2x00rfkill.c:(.text+0x176e9f): undefined reference to `input_event' (.text+0x176eca): undefined reference to `input_unregister_polled_device' (.text+0x176efc): undefined reference to `input_free_polled_device' (.text+0x176f37): undefined reference to `input_free_polled_device' (.text+0x176fd8): undefined reference to `input_register_polled_device' (.text+0x1772c0): undefined reference to `led_classdev_resume' (.text+0x1772d4): undefined reference to `led_classdev_resume' (.text+0x1772e8): undefined reference to `led_classdev_resume' (.text+0x17730a): undefined reference to `led_classdev_suspend' (.text+0x17731e): undefined reference to `led_classdev_suspend' (.text+0x17732f): undefined reference to `led_classdev_suspend' rt2x00leds.c:(.text+0x177348): undefined reference to `led_classdev_unregister' rt2x00leds.c:(.text+0x1773c0): undefined reference to `led_classdev_register' rfkill-input.c:(.text+0x209e4c): undefined reference to `input_close_device' rfkill-input.c:(.text+0x209e53): undefined reference to `input_unregister_handle' rfkill-input.c:(.text+0x209ea1): undefined reference to `input_register_handle' rfkill-input.c:(.text+0x209eae): undefined reference to `input_open_device' rfkill-input.c:(.text+0x209ebb): undefined reference to `input_unregister_handle' rfkill-input.c:(.init.text+0x17405): undefined reference to `input_register_handler' rfkill-input.c:(.exit.text+0x194f): undefined reference to `input_unregister_handler' make[1]: *** [vmlinux] Error 1 Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> --- drivers/net/wireless/rt2x00/Kconfig | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) --- linux-next-20080611.orig/drivers/net/wireless/rt2x00/Kconfig +++ linux-next-20080611/drivers/net/wireless/rt2x00/Kconfig @@ -36,6 +36,7 @@ config RT2X00_LIB_FIRMWARE config RT2X00_LIB_RFKILL boolean depends on RT2X00_LIB + depends on INPUT select RFKILL select INPUT_POLLDEV @@ -56,7 +57,7 @@ config RT2400PCI config RT2400PCI_RFKILL bool "Ralink rt2400 rfkill support" - depends on RT2400PCI + depends on RT2400PCI && INPUT select RT2X00_LIB_RFKILL ---help--- This adds support for integrated rt2400 hardware that features a @@ -84,7 +85,7 @@ config RT2500PCI config RT2500PCI_RFKILL bool "Ralink rt2500 rfkill support" - depends on RT2500PCI + depends on RT2500PCI && INPUT select RT2X00_LIB_RFKILL ---help--- This adds support for integrated rt2500 hardware that features a ^ permalink raw reply [flat|nested] 11+ messages in thread
[parent not found: <20080611123245.4089f47b.randy.dunlap-QHcLZuEGTsvQT0dZR+AlfA@public.gmane.org>]
* Re: [Rt2400-devel] next-20080611 rt2x00: build failure [not found] ` <20080611123245.4089f47b.randy.dunlap-QHcLZuEGTsvQT0dZR+AlfA@public.gmane.org> @ 2008-06-11 19:59 ` Ivo van Doorn [not found] ` <200806112159.00779.IvDoorn-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org> 0 siblings, 1 reply; 11+ messages in thread From: Ivo van Doorn @ 2008-06-11 19:59 UTC (permalink / raw) To: Randy Dunlap Cc: rt2400-devel-5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f, John W. Linville, linux-next-u79uwXL29TY76Z2rM5mHXA, linux-wireless-u79uwXL29TY76Z2rM5mHXA On Wednesday 11 June 2008, Randy Dunlap wrote: > On Wed, 11 Jun 2008 21:03:58 +0200 Ivo van Doorn wrote: > > > On Wednesday 11 June 2008, John W. Linville wrote: > > > On Wed, Jun 11, 2008 at 10:07:48AM -0700, Randy Dunlap wrote: > > > > when CONFIG_INPUT=n and > > > > # CONFIG_NEW_LEDS is not set > > > > CONFIG_LEDS_CLASS=y > > > > > > > > (full config attached) > > > > > > > > vmlinux.o: In function `iwl_rfkill_unregister': > > > > (.text+0x174cdc): undefined reference to `input_unregister_device' > > > > vmlinux.o: In function `iwl_rfkill_init': > > > > (.text+0x174d9f): undefined reference to `input_allocate_device' > > > > vmlinux.o: In function `iwl_rfkill_init': > > > > (.text+0x174e2d): undefined reference to `input_register_device' > > > > vmlinux.o: In function `iwl_rfkill_init': > > > > (.text+0x174e53): undefined reference to `input_free_device' > > > > vmlinux.o: In function `rt2x00rfkill_allocate_polldev': > > > > rt2x00rfkill.c:(.text+0x176dc4): undefined reference to `input_allocate_polled_device' > > > > vmlinux.o: In function `rt2x00rfkill_poll': > > > > rt2x00rfkill.c:(.text+0x176e8b): undefined reference to `input_event' > > > > rt2x00rfkill.c:(.text+0x176e9f): undefined reference to `input_event' > > > > > > <snip> > > > > > > Ick, what a mess... > > > > > > So what combination of depends and select of INPUT, INPUT_POLLDEV, > > > and RFKILL_INPUT do we need to resolve this? > > > > Well RFKILL_INPUT shouldn't be selected by a driver, in fact any driver that > > selects or depends on RFKILL_INPUT is wrong. But selecting it only makes > > matters worse since that will bypass the INPUT dependency. > > When INPUT_POLLDEV is required I guess it is best to depend on INPUT and > > select INPUT_POLLDEV. > > > > iwlwifi is selecting RFKILL_INPUT and preferably they should drop the select > > altogether (not replacing it with a depend), but since I am not sure about the > > reason for the select > > Yes, that easily causes a build failure. > > > rt2x00 is selecting INPUT_POLLDEV but should depend on INPUT first (as done > > in the patch in my previous mail). > > > > b43 shouldn't really depend on RFKILL_INPUT but their Kconfig is correct and > > shouldn't cause the above build failure. > > Patch below fixes the RFKILL/INPUT build problems for me. I haven't addresses > the leds_* build problems yet. > > > From: Randy Dunlap <randy.dunlap-QHcLZuEGTsvQT0dZR+AlfA@public.gmane.org> > > Config symbols that select RFKILL need to depend on INPUT so that > undefined symbols are not used in the build. > > This patch fixes the input_* symbols build errors. > > (.text+0x174cdc): undefined reference to `input_unregister_device' > (.text+0x174d9f): undefined reference to `input_allocate_device' > (.text+0x174e2d): undefined reference to `input_register_device' > (.text+0x174e53): undefined reference to `input_free_device' > rt2x00rfkill.c:(.text+0x176dc4): undefined reference to `input_allocate_polled_device' > rt2x00rfkill.c:(.text+0x176e8b): undefined reference to `input_event' > rt2x00rfkill.c:(.text+0x176e9f): undefined reference to `input_event' > (.text+0x176eca): undefined reference to `input_unregister_polled_device' > (.text+0x176efc): undefined reference to `input_free_polled_device' > (.text+0x176f37): undefined reference to `input_free_polled_device' > (.text+0x176fd8): undefined reference to `input_register_polled_device' > (.text+0x1772c0): undefined reference to `led_classdev_resume' > (.text+0x1772d4): undefined reference to `led_classdev_resume' > (.text+0x1772e8): undefined reference to `led_classdev_resume' > (.text+0x17730a): undefined reference to `led_classdev_suspend' > (.text+0x17731e): undefined reference to `led_classdev_suspend' > (.text+0x17732f): undefined reference to `led_classdev_suspend' > rt2x00leds.c:(.text+0x177348): undefined reference to `led_classdev_unregister' > rt2x00leds.c:(.text+0x1773c0): undefined reference to `led_classdev_register' > rfkill-input.c:(.text+0x209e4c): undefined reference to `input_close_device' > rfkill-input.c:(.text+0x209e53): undefined reference to `input_unregister_handle' > rfkill-input.c:(.text+0x209ea1): undefined reference to `input_register_handle' > rfkill-input.c:(.text+0x209eae): undefined reference to `input_open_device' > rfkill-input.c:(.text+0x209ebb): undefined reference to `input_unregister_handle' > rfkill-input.c:(.init.text+0x17405): undefined reference to `input_register_handler' > rfkill-input.c:(.exit.text+0x194f): undefined reference to `input_unregister_handler' > make[1]: *** [vmlinux] Error 1 > > Signed-off-by: Randy Dunlap <randy.dunlap-QHcLZuEGTsvQT0dZR+AlfA@public.gmane.org> > --- > drivers/net/wireless/rt2x00/Kconfig | 5 +++-- > 1 file changed, 3 insertions(+), 2 deletions(-) > > --- linux-next-20080611.orig/drivers/net/wireless/rt2x00/Kconfig > +++ linux-next-20080611/drivers/net/wireless/rt2x00/Kconfig > @@ -36,6 +36,7 @@ config RT2X00_LIB_FIRMWARE > config RT2X00_LIB_RFKILL > boolean > depends on RT2X00_LIB > + depends on INPUT > select RFKILL > select INPUT_POLLDEV > > @@ -56,7 +57,7 @@ config RT2400PCI > > config RT2400PCI_RFKILL > bool "Ralink rt2400 rfkill support" > - depends on RT2400PCI > + depends on RT2400PCI && INPUT > select RT2X00_LIB_RFKILL > ---help--- > This adds support for integrated rt2400 hardware that features a > @@ -84,7 +85,7 @@ config RT2500PCI > > config RT2500PCI_RFKILL > bool "Ralink rt2500 rfkill support" > - depends on RT2500PCI > + depends on RT2500PCI && INPUT > select RT2X00_LIB_RFKILL > ---help--- > This adds support for integrated rt2500 hardware that features a Could you include the RT61PCI_RFKILL change as well? After that you can add: Acked-by: Ivo van Doorn <IvDoorn-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org> Ivo -- To unsubscribe from this list: send the line "unsubscribe linux-wireless" in the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org More majordomo info at http://vger.kernel.org/majordomo-info.html ^ permalink raw reply [flat|nested] 11+ messages in thread
[parent not found: <200806112159.00779.IvDoorn-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>]
* [PATCH] [Rt2400-devel] next-20080611 rt2x00: build failure [not found] ` <200806112159.00779.IvDoorn-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org> @ 2008-06-11 19:57 ` Randy Dunlap 2008-06-11 20:32 ` [PATCH] next-20080611 rt2x00: LEDS " Randy Dunlap 1 sibling, 0 replies; 11+ messages in thread From: Randy Dunlap @ 2008-06-11 19:57 UTC (permalink / raw) To: Ivo van Doorn Cc: rt2400-devel-5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f, John W. Linville, linux-next-u79uwXL29TY76Z2rM5mHXA, linux-wireless-u79uwXL29TY76Z2rM5mHXA > Could you include the RT61PCI_RFKILL change as well? <quilt refresh needed :( > > After that you can add: > > Acked-by: Ivo van Doorn <IvDoorn-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org> Updated patch. Thanks. --- From: Randy Dunlap <randy.dunlap-QHcLZuEGTsvQT0dZR+AlfA@public.gmane.org> Config symbols that select RFKILL need to depend on INPUT so that undefined symbols are not used in the build. This patch fixes the input_* symbols build errors. (.text+0x174cdc): undefined reference to `input_unregister_device' (.text+0x174d9f): undefined reference to `input_allocate_device' (.text+0x174e2d): undefined reference to `input_register_device' (.text+0x174e53): undefined reference to `input_free_device' rt2x00rfkill.c:(.text+0x176dc4): undefined reference to `input_allocate_polled_device' rt2x00rfkill.c:(.text+0x176e8b): undefined reference to `input_event' rt2x00rfkill.c:(.text+0x176e9f): undefined reference to `input_event' (.text+0x176eca): undefined reference to `input_unregister_polled_device' (.text+0x176efc): undefined reference to `input_free_polled_device' (.text+0x176f37): undefined reference to `input_free_polled_device' (.text+0x176fd8): undefined reference to `input_register_polled_device' (.text+0x1772c0): undefined reference to `led_classdev_resume' (.text+0x1772d4): undefined reference to `led_classdev_resume' (.text+0x1772e8): undefined reference to `led_classdev_resume' (.text+0x17730a): undefined reference to `led_classdev_suspend' (.text+0x17731e): undefined reference to `led_classdev_suspend' (.text+0x17732f): undefined reference to `led_classdev_suspend' rt2x00leds.c:(.text+0x177348): undefined reference to `led_classdev_unregister' rt2x00leds.c:(.text+0x1773c0): undefined reference to `led_classdev_register' rfkill-input.c:(.text+0x209e4c): undefined reference to `input_close_device' rfkill-input.c:(.text+0x209e53): undefined reference to `input_unregister_handle' rfkill-input.c:(.text+0x209ea1): undefined reference to `input_register_handle' rfkill-input.c:(.text+0x209eae): undefined reference to `input_open_device' rfkill-input.c:(.text+0x209ebb): undefined reference to `input_unregister_handle' rfkill-input.c:(.init.text+0x17405): undefined reference to `input_register_handler' rfkill-input.c:(.exit.text+0x194f): undefined reference to `input_unregister_handler' make[1]: *** [vmlinux] Error 1 Signed-off-by: Randy Dunlap <randy.dunlap-QHcLZuEGTsvQT0dZR+AlfA@public.gmane.org> Acked-by: Ivo van Doorn <IvDoorn-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org> --- drivers/net/wireless/rt2x00/Kconfig | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-) --- linux-next-20080611.orig/drivers/net/wireless/rt2x00/Kconfig +++ linux-next-20080611/drivers/net/wireless/rt2x00/Kconfig @@ -36,6 +36,7 @@ config RT2X00_LIB_FIRMWARE config RT2X00_LIB_RFKILL boolean depends on RT2X00_LIB + depends on INPUT select RFKILL select INPUT_POLLDEV @@ -56,7 +57,7 @@ config RT2400PCI config RT2400PCI_RFKILL bool "Ralink rt2400 rfkill support" - depends on RT2400PCI + depends on RT2400PCI && INPUT select RT2X00_LIB_RFKILL ---help--- This adds support for integrated rt2400 hardware that features a @@ -84,7 +85,7 @@ config RT2500PCI config RT2500PCI_RFKILL bool "Ralink rt2500 rfkill support" - depends on RT2500PCI + depends on RT2500PCI && INPUT select RT2X00_LIB_RFKILL ---help--- This adds support for integrated rt2500 hardware that features a @@ -114,7 +115,7 @@ config RT61PCI config RT61PCI_RFKILL bool "Ralink rt2501/rt61 rfkill support" - depends on RT61PCI + depends on RT61PCI && INPUT select RT2X00_LIB_RFKILL ---help--- This adds support for integrated rt61 hardware that features a -- To unsubscribe from this list: send the line "unsubscribe linux-wireless" in the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org More majordomo info at http://vger.kernel.org/majordomo-info.html ^ permalink raw reply [flat|nested] 11+ messages in thread
* [PATCH] next-20080611 rt2x00: LEDS build failure [not found] ` <200806112159.00779.IvDoorn-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org> 2008-06-11 19:57 ` [PATCH] " Randy Dunlap @ 2008-06-11 20:32 ` Randy Dunlap 2008-06-11 22:15 ` Ivo van Doorn 1 sibling, 1 reply; 11+ messages in thread From: Randy Dunlap @ 2008-06-11 20:32 UTC (permalink / raw) To: Ivo van Doorn Cc: rt2400-devel-5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f, John W. Linville, linux-next-u79uwXL29TY76Z2rM5mHXA, linux-wireless-u79uwXL29TY76Z2rM5mHXA From: Randy Dunlap <randy.dunlap-QHcLZuEGTsvQT0dZR+AlfA@public.gmane.org> Config symbols that select LEDS_CLASS need to depend on NEW_LEDS so that undefined symbols are not used in the build. The alternative is to select NEW_LEDS, which some drivers do. This patch fixes the led_* symbols build errors. (.text+0x174cdc): undefined reference to `input_unregister_device' (.text+0x174d9f): undefined reference to `input_allocate_device' (.text+0x174e2d): undefined reference to `input_register_device' (.text+0x174e53): undefined reference to `input_free_device' rt2x00rfkill.c:(.text+0x176dc4): undefined reference to `input_allocate_polled_device' rt2x00rfkill.c:(.text+0x176e8b): undefined reference to `input_event' rt2x00rfkill.c:(.text+0x176e9f): undefined reference to `input_event' (.text+0x176eca): undefined reference to `input_unregister_polled_device' (.text+0x176efc): undefined reference to `input_free_polled_device' (.text+0x176f37): undefined reference to `input_free_polled_device' (.text+0x176fd8): undefined reference to `input_register_polled_device' (.text+0x1772c0): undefined reference to `led_classdev_resume' (.text+0x1772d4): undefined reference to `led_classdev_resume' (.text+0x1772e8): undefined reference to `led_classdev_resume' (.text+0x17730a): undefined reference to `led_classdev_suspend' (.text+0x17731e): undefined reference to `led_classdev_suspend' (.text+0x17732f): undefined reference to `led_classdev_suspend' rt2x00leds.c:(.text+0x177348): undefined reference to `led_classdev_unregister' rt2x00leds.c:(.text+0x1773c0): undefined reference to `led_classdev_register' rfkill-input.c:(.text+0x209e4c): undefined reference to `input_close_device' rfkill-input.c:(.text+0x209e53): undefined reference to `input_unregister_handle' rfkill-input.c:(.text+0x209ea1): undefined reference to `input_register_handle' rfkill-input.c:(.text+0x209eae): undefined reference to `input_open_device' rfkill-input.c:(.text+0x209ebb): undefined reference to `input_unregister_handle' rfkill-input.c:(.init.text+0x17405): undefined reference to `input_register_handler' rfkill-input.c:(.exit.text+0x194f): undefined reference to `input_unregister_handler' make[1]: *** [vmlinux] Error 1 Signed-off-by: Randy Dunlap <randy.dunlap-QHcLZuEGTsvQT0dZR+AlfA@public.gmane.org> --- drivers/net/wireless/rt2x00/Kconfig | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) --- linux-next-20080611.orig/drivers/net/wireless/rt2x00/Kconfig +++ linux-next-20080611/drivers/net/wireless/rt2x00/Kconfig @@ -42,7 +42,7 @@ config RT2X00_LIB_RFKILL config RT2X00_LIB_LEDS boolean - depends on RT2X00_LIB + depends on RT2X00_LIB && NEW_LEDS config RT2400PCI tristate "Ralink rt2400 (PCI/PCMCIA) support" @@ -66,7 +66,7 @@ config RT2400PCI_RFKILL config RT2400PCI_LEDS bool "Ralink rt2400 leds support" - depends on RT2400PCI + depends on RT2400PCI && NEW_LEDS select LEDS_CLASS select RT2X00_LIB_LEDS ---help--- @@ -94,7 +94,7 @@ config RT2500PCI_RFKILL config RT2500PCI_LEDS bool "Ralink rt2500 leds support" - depends on RT2500PCI + depends on RT2500PCI && NEW_LEDS select LEDS_CLASS select RT2X00_LIB_LEDS ---help--- @@ -124,7 +124,7 @@ config RT61PCI_RFKILL config RT61PCI_LEDS bool "Ralink rt2501/rt61 leds support" - depends on RT61PCI + depends on RT61PCI && NEW_LEDS select LEDS_CLASS select RT2X00_LIB_LEDS ---help--- @@ -162,7 +162,7 @@ config RT73USB config RT73USB_LEDS bool "Ralink rt2501/rt73 leds support" - depends on RT73USB + depends on RT73USB && NEW_LEDS select LEDS_CLASS select RT2X00_LIB_LEDS ---help--- -- To unsubscribe from this list: send the line "unsubscribe linux-wireless" in the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org More majordomo info at http://vger.kernel.org/majordomo-info.html ^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: [PATCH] next-20080611 rt2x00: LEDS build failure 2008-06-11 20:32 ` [PATCH] next-20080611 rt2x00: LEDS " Randy Dunlap @ 2008-06-11 22:15 ` Ivo van Doorn 0 siblings, 0 replies; 11+ messages in thread From: Ivo van Doorn @ 2008-06-11 22:15 UTC (permalink / raw) To: Randy Dunlap; +Cc: rt2400-devel, John W. Linville, linux-next, linux-wireless On Wednesday 11 June 2008, Randy Dunlap wrote: > From: Randy Dunlap <randy.dunlap@oracle.com> > > Config symbols that select LEDS_CLASS need to depend on NEW_LEDS so that > undefined symbols are not used in the build. > > The alternative is to select NEW_LEDS, which some drivers do. > > This patch fixes the led_* symbols build errors. > > (.text+0x174cdc): undefined reference to `input_unregister_device' > (.text+0x174d9f): undefined reference to `input_allocate_device' > (.text+0x174e2d): undefined reference to `input_register_device' > (.text+0x174e53): undefined reference to `input_free_device' > rt2x00rfkill.c:(.text+0x176dc4): undefined reference to `input_allocate_polled_device' > rt2x00rfkill.c:(.text+0x176e8b): undefined reference to `input_event' > rt2x00rfkill.c:(.text+0x176e9f): undefined reference to `input_event' > (.text+0x176eca): undefined reference to `input_unregister_polled_device' > (.text+0x176efc): undefined reference to `input_free_polled_device' > (.text+0x176f37): undefined reference to `input_free_polled_device' > (.text+0x176fd8): undefined reference to `input_register_polled_device' > (.text+0x1772c0): undefined reference to `led_classdev_resume' > (.text+0x1772d4): undefined reference to `led_classdev_resume' > (.text+0x1772e8): undefined reference to `led_classdev_resume' > (.text+0x17730a): undefined reference to `led_classdev_suspend' > (.text+0x17731e): undefined reference to `led_classdev_suspend' > (.text+0x17732f): undefined reference to `led_classdev_suspend' > rt2x00leds.c:(.text+0x177348): undefined reference to `led_classdev_unregister' > rt2x00leds.c:(.text+0x1773c0): undefined reference to `led_classdev_register' > rfkill-input.c:(.text+0x209e4c): undefined reference to `input_close_device' > rfkill-input.c:(.text+0x209e53): undefined reference to `input_unregister_handle' > rfkill-input.c:(.text+0x209ea1): undefined reference to `input_register_handle' > rfkill-input.c:(.text+0x209eae): undefined reference to `input_open_device' > rfkill-input.c:(.text+0x209ebb): undefined reference to `input_unregister_handle' > rfkill-input.c:(.init.text+0x17405): undefined reference to `input_register_handler' > rfkill-input.c:(.exit.text+0x194f): undefined reference to `input_unregister_handler' > make[1]: *** [vmlinux] Error 1 > > Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Acked-by: Ivo van Doorn <IvDoorn@gmail.com> > --- > drivers/net/wireless/rt2x00/Kconfig | 10 +++++----- > 1 file changed, 5 insertions(+), 5 deletions(-) > > --- linux-next-20080611.orig/drivers/net/wireless/rt2x00/Kconfig > +++ linux-next-20080611/drivers/net/wireless/rt2x00/Kconfig > @@ -42,7 +42,7 @@ config RT2X00_LIB_RFKILL > > config RT2X00_LIB_LEDS > boolean > - depends on RT2X00_LIB > + depends on RT2X00_LIB && NEW_LEDS > > config RT2400PCI > tristate "Ralink rt2400 (PCI/PCMCIA) support" > @@ -66,7 +66,7 @@ config RT2400PCI_RFKILL > > config RT2400PCI_LEDS > bool "Ralink rt2400 leds support" > - depends on RT2400PCI > + depends on RT2400PCI && NEW_LEDS > select LEDS_CLASS > select RT2X00_LIB_LEDS > ---help--- > @@ -94,7 +94,7 @@ config RT2500PCI_RFKILL > > config RT2500PCI_LEDS > bool "Ralink rt2500 leds support" > - depends on RT2500PCI > + depends on RT2500PCI && NEW_LEDS > select LEDS_CLASS > select RT2X00_LIB_LEDS > ---help--- > @@ -124,7 +124,7 @@ config RT61PCI_RFKILL > > config RT61PCI_LEDS > bool "Ralink rt2501/rt61 leds support" > - depends on RT61PCI > + depends on RT61PCI && NEW_LEDS > select LEDS_CLASS > select RT2X00_LIB_LEDS > ---help--- > @@ -162,7 +162,7 @@ config RT73USB > > config RT73USB_LEDS > bool "Ralink rt2501/rt73 leds support" > - depends on RT73USB > + depends on RT73USB && NEW_LEDS > select LEDS_CLASS > select RT2X00_LIB_LEDS > ---help--- > ^ permalink raw reply [flat|nested] 11+ messages in thread
end of thread, other threads:[~2008-06-11 22:03 UTC | newest]
Thread overview: 11+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2008-06-11 17:07 next-20080611 rt2x00: build failure Randy Dunlap
2008-06-11 17:48 ` [Rt2400-devel] " Ivo van Doorn
2008-06-11 17:46 ` Randy Dunlap
[not found] ` <32664704.1213206386295.JavaMail.oracle-s5rVz5nKm9nKpDp+h9PlwkEOCMrvLtNR@public.gmane.org>
2008-06-11 18:21 ` Ivo van Doorn
[not found] ` <20080611100748.d35829f4.randy.dunlap-QHcLZuEGTsvQT0dZR+AlfA@public.gmane.org>
2008-06-11 18:10 ` John W. Linville
2008-06-11 19:03 ` [Rt2400-devel] " Ivo van Doorn
2008-06-11 19:32 ` Randy Dunlap
[not found] ` <20080611123245.4089f47b.randy.dunlap-QHcLZuEGTsvQT0dZR+AlfA@public.gmane.org>
2008-06-11 19:59 ` Ivo van Doorn
[not found] ` <200806112159.00779.IvDoorn-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
2008-06-11 19:57 ` [PATCH] " Randy Dunlap
2008-06-11 20:32 ` [PATCH] next-20080611 rt2x00: LEDS " Randy Dunlap
2008-06-11 22:15 ` Ivo van Doorn
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for NNTP newsgroup(s).