Linux-Next discussions
 help / color / mirror / Atom feed
From: Stephen Rothwell <sfr@canb.auug.org.au>
To: David Woodhouse <dwmw2@infradead.org>
Cc: linux-next@vger.kernel.org, Jaswinder Singh <jaswinder@infradead.org>
Subject: linux-next: manual merge of the firmware tree
Date: Wed, 15 Oct 2008 18:58:53 +1100	[thread overview]
Message-ID: <20081015185853.8a98f19c.sfr@canb.auug.org.au> (raw)

Hi David,

Today's linux-next merge of the firmware tree got a conflict in
firmware/WHENCE between commit fcaa40669cd798ca2ac0d15441e8a1d1145f2b16
("cassini: use request_firmware") from Linus' tree and commit
9e0fa5d599deeb9e34376af4f7c645b69b577758 ("firmware: convert e100 driver
to request_firmware()") from the firmware tree.

Just overlapping additions.  I fixed it up (see below).
-- 
Cheers,
Stephen Rothwell                    sfr@canb.auug.org.au
http://www.canb.auug.org.au/~sfr/

diff --cc firmware/WHENCE
index 57002cd,a4c83e1..0000000
--- a/firmware/WHENCE
+++ b/firmware/WHENCE
@@@ -340,12 -340,123 +340,133 @@@ Found in hex form in kernel source
  
  --------------------------------------------------------------------------
  
 +Driver: CASSINI - Sun Cassini
 +
 +File: sun/cassini.bin
 +
 +Licence: Unknown
 +
 +Found in hex form in kernel source.
 +
 +--------------------------------------------------------------------------
++
+ Driver: e100 -- Intel PRO/100 Ethernet NIC
+ 
+ File: e100/d101m_ucode.bin
+ File: e100/d101s_ucode.bin
+ File: e100/d102e_ucode.bin
+ 
+ Licence: Unknown
+ 
+ Found in hex form in kernel source.
+ 
+ --------------------------------------------------------------------------
+ 
+ Driver: acenic -- Alteon AceNIC Gigabit Ethernet card
+ 
+ File: acenic/tg1.bin
+ File: acenic/tg2.bin
+ 
+ Licence: Unknown
+ 
+ Found in hex form in kernel source, but source allegedly available at
+ http://alteon.shareable.org/
+ 
+ --------------------------------------------------------------------------
+ 
+ Driver: tigon3 -- Broadcom Tigon3 based gigabit Ethernet cards
+ 
+ File: tigon/tg3.bin
+ File: tigon/tg3_tso.bin
+ File: tigon/tg3_tso5.bin
+ 
+ Licence:
+  * Firmware is:
+  *	Derived from proprietary unpublished source code,
+  *	Copyright (C) 2000-2003 Broadcom Corporation.
+  *
+  *	Permission is hereby granted for the distribution of this firmware
+  *	data in hexadecimal or equivalent format, provided this copyright
+  *	notice is accompanying it.
+ 
+ Found in hex form in kernel source.
+ 
+ --------------------------------------------------------------------------
+ 
+ Driver: DVB AV7110 -- AV7110 cards
+ 
+ File: av7110/bootcode.bin
+ 
+ Licence: GPLv2 or later
+ 
+ ARM assembly source code available at http://www.linuxtv.org/downloads/firmware/Boot.S
+ 
+ --------------------------------------------------------------------------
+ 
+ Driver: SCSI_QLOGIC_1280 - Qlogic QLA 1240/1x80/1x160 SCSI support
+ 
+ File: qlogic/1040.bin
+ File: qlogic/1280.bin
+ File: qlogic/12160.bin
+ 
+ Licence: Allegedly GPLv2+, but no source visible. Marked:
+ 
+                    QLOGIC LINUX SOFTWARE
+   QLogic ISP1280/ device driver for Linux 2.2.x and 2.4.x
+   Copyright (C) 2001 Qlogic Corporation (www.qlogic.com)
+ 
+ --------------------------------------------------------------------------
+ 
+ Driver: SCSI_ADVANSYS - AdvanSys SCSI
+ 
+ File: advansys/mcode.bin
+ File: advansys/3550.bin
+ File: advansys/38C0800.bin
+ File: advansys/38C1600.bin
+ 
+ Licence: Allegedly GPLv2+, but no source visible.
+ 
+ Found in hex form in kernel source.
+ 
+ --------------------------------------------------------------------------
+ 
+ Driver: SCSI_QLOGICPTI - PTI Qlogic, ISP Driver
+ 
+ File: qlogic/isp1000.bin
+ 
+ Licence: Unknown
+ 
+ Found in hex form in kernel source.
+ 
+ --------------------------------------------------------------------------
+ 
+ Driver: ADAPTEC_STARFIRE - Adaptec Starfire/DuraLAN support
+ 
+ File: adaptec/starfire_rx.bin
+ File: adaptec/starfire_tx.bin
+ 
+ Licence: Allegedly GPLv2, but no source visible.
+ 
+ Found in hex form in kernel source, with the following notice:
+ 
+  BECAUSE THE PROGRAM IS LICENSED FREE OF CHARGE IT IS LICENSED "AS IS" AND
+  THERE IS NO WARRANTY FOR THE PROGRAM, INCLUDING BUT NOT LIMITED TO THE
+  IMPLIED WARRANTIES OF MERCHANTIBILITY OR FITNESS FOR A PARTICULAR PURPOSE
+  (TO THE EXTENT PERMITTED BY APPLICABLE LAW). USE OF THE PROGRAM IS AT YOUR
+  OWN RISK. IN NO EVENT WILL ADAPTEC OR ITS LICENSORS BE LIABLE TO YOU FOR
+  DAMAGES, INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES
+  ARISING OUT OF THE USE OR INABILITY TO USE THE PROGRAM.
+ 
+ --------------------------------------------------------------------------
+ 
+ Driver: wavefront - ISA WaveFront sound card
+ 
+ File: yamaha/yss225_registers.bin
+ 
+ Licence: Allegedly GPLv2+, but no source visible.
+ 
+ Found in hex form in kernel source, with the following comment:
+    Copyright (c) 1998-2002 by Paul Davis <pbd@op.net>
+ 
+ 
+ --------------------------------------------------------------------------

             reply	other threads:[~2008-10-15  7:59 UTC|newest]

Thread overview: 28+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2008-10-15  7:58 Stephen Rothwell [this message]
  -- strict thread matches above, loose matches on Subject: below --
2008-11-28  5:03 linux-next: manual merge of the firmware tree Stephen Rothwell
2008-11-29  0:14 ` Divy Le Ray
2008-11-29  0:48   ` Stephen Rothwell
2008-11-29 10:11     ` David Woodhouse
2008-11-25  7:21 Stephen Rothwell
2008-09-01  6:19 Stephen Rothwell
2008-08-28  5:38 Stephen Rothwell
2008-08-28 13:51 ` Takashi Iwai
2008-07-29  4:27 Stephen Rothwell
2008-07-11  6:02 Stephen Rothwell
2008-07-07 16:02 Stephen Rothwell
2008-06-30  9:17 Stephen Rothwell
2008-06-30  9:14 Stephen Rothwell
2008-06-30  9:09 Stephen Rothwell
2008-06-30  9:24 ` David Woodhouse
2008-06-30  9:33   ` Stephen Rothwell
2008-06-26 13:38 Stephen Rothwell
2008-06-26 13:51 ` Takashi Iwai
2008-06-26 15:42   ` Stephen Rothwell
2008-06-26 15:47     ` David Woodhouse
2008-06-30  9:23 ` Stephen Rothwell
2008-06-30  9:27   ` David Woodhouse
2008-06-30  9:32     ` Stephen Rothwell
2008-06-24  6:55 Stephen Rothwell
2008-06-24  7:57 ` Stephen Rothwell
2008-06-24  8:04   ` David Woodhouse
2008-06-24 11:20     ` Stephen Rothwell

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20081015185853.8a98f19c.sfr@canb.auug.org.au \
    --to=sfr@canb.auug.org.au \
    --cc=dwmw2@infradead.org \
    --cc=jaswinder@infradead.org \
    --cc=linux-next@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox