linux-next.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: "Rafael J. Wysocki" <rjw@sisk.pl>
To: Randy Dunlap <randy.dunlap@oracle.com>,
	Jesse Barnes <jbarnes@virtuousgeek.org>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>,
	linux-next@vger.kernel.org, LKML <linux-kernel@vger.kernel.org>,
	linux-pci@vger.kernel.org
Subject: Re: linux-next: Tree for January 18 (pci + pm)
Date: Wed, 20 Jan 2010 00:04:07 +0100	[thread overview]
Message-ID: <201001200004.07654.rjw@sisk.pl> (raw)
In-Reply-To: <20100118154424.d54c0e3e.randy.dunlap@oracle.com>

On Tuesday 19 January 2010, Randy Dunlap wrote:
> On Mon, 18 Jan 2010 19:57:43 +1100 Stephen Rothwell wrote:
> 
> > Hi all,
> > 
> > Changes since 20100114:
> 
> 
> drivers/pci/pci-driver.c: In function 'pci_pm_runtime_resume':
> drivers/pci/pci-driver.c:991: error: implicit declaration of function 'pci_pm_default_resume_early'
> drivers/pci/pci-driver.c: At top level:
> drivers/pci/pci-driver.c:1027: error: 'pci_pm_prepare' undeclared here (not in a function)
> drivers/pci/pci-driver.c:1028: error: 'pci_pm_complete' undeclared here (not in a function)
> drivers/pci/pci-driver.c:1029: error: 'pci_pm_suspend' undeclared here (not in a function)
> drivers/pci/pci-driver.c:1030: error: 'pci_pm_resume' undeclared here (not in a function)
> drivers/pci/pci-driver.c:1031: error: 'pci_pm_freeze' undeclared here (not in a function)
> drivers/pci/pci-driver.c:1032: error: 'pci_pm_thaw' undeclared here (not in a function)
> drivers/pci/pci-driver.c:1033: error: 'pci_pm_poweroff' undeclared here (not in a function)
> drivers/pci/pci-driver.c:1034: error: 'pci_pm_restore' undeclared here (not in a function)
> drivers/pci/pci-driver.c:1035: error: 'pci_pm_suspend_noirq' undeclared here (not in a function)
> drivers/pci/pci-driver.c:1036: error: 'pci_pm_resume_noirq' undeclared here (not in a function)
> drivers/pci/pci-driver.c:1037: error: 'pci_pm_freeze_noirq' undeclared here (not in a function)
> drivers/pci/pci-driver.c:1038: error: 'pci_pm_thaw_noirq' undeclared here (not in a function)
> drivers/pci/pci-driver.c:1039: error: 'pci_pm_poweroff_noirq' undeclared here (not in a function)
> drivers/pci/pci-driver.c:1040: error: 'pci_pm_restore_noirq' undeclared here (not in a function)
> 
> 
> partial config:
> 
> CONFIG_PM=y
> # CONFIG_PM_DEBUG is not set
> # CONFIG_SUSPEND is not set
> # CONFIG_HIBERNATION is not set
> CONFIG_PM_RUNTIME=y
> CONFIG_PM_OPS=y
> 
> 
> Full config is attached.

Ah, too many ifdefs.

Thanks, the patch below fixes that for me.

Rafael

---
From: Rafael J. Wysocki <rjw@sisk.pl>
Subject: PCI / PM: Fix compilation for set CONFIG_PM_RUNTIME and CONFIG_PM_SLEEP unset

Fix failure to compile drivers/pci/pci-driver.c for CONFIG_PM_RUNTIME
set and CONFIG_PM_SLEEP is unset, introduced by the PCI run-time
power management patches.

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Reported-by: Randy Dunlap <randy.dunlap@oracle.com>
---
 drivers/pci/pci-driver.c |   61 +++++++++++++++++++++++++++--------------------
 1 file changed, 36 insertions(+), 25 deletions(-)

Index: linux-2.6/drivers/pci/pci-driver.c
===================================================================
--- linux-2.6.orig/drivers/pci/pci-driver.c
+++ linux-2.6/drivers/pci/pci-driver.c
@@ -405,6 +405,35 @@ static void pci_device_shutdown(struct d
 	pci_msix_shutdown(pci_dev);
 }
 
+#ifdef CONFIG_PM_OPS
+
+/* Auxiliary functions used for system resume and run-time resume. */
+
+/**
+ * pci_restore_standard_config - restore standard config registers of PCI device
+ * @pci_dev: PCI device to handle
+ */
+static int pci_restore_standard_config(struct pci_dev *pci_dev)
+{
+	pci_update_current_state(pci_dev, PCI_UNKNOWN);
+
+	if (pci_dev->current_state != PCI_D0) {
+		int error = pci_set_power_state(pci_dev, PCI_D0);
+		if (error)
+			return error;
+	}
+
+	return pci_restore_state(pci_dev);
+}
+
+static void pci_pm_default_resume_early(struct pci_dev *pci_dev)
+{
+	pci_restore_standard_config(pci_dev);
+	pci_fixup_device(pci_fixup_resume_early, pci_dev);
+}
+
+#endif
+
 #ifdef CONFIG_PM_SLEEP
 
 /*
@@ -521,29 +550,6 @@ static int pci_legacy_resume(struct devi
 
 /* Auxiliary functions used by the new power management framework */
 
-/**
- * pci_restore_standard_config - restore standard config registers of PCI device
- * @pci_dev: PCI device to handle
- */
-static int pci_restore_standard_config(struct pci_dev *pci_dev)
-{
-	pci_update_current_state(pci_dev, PCI_UNKNOWN);
-
-	if (pci_dev->current_state != PCI_D0) {
-		int error = pci_set_power_state(pci_dev, PCI_D0);
-		if (error)
-			return error;
-	}
-
-	return pci_restore_state(pci_dev);
-}
-
-static void pci_pm_default_resume_early(struct pci_dev *pci_dev)
-{
-	pci_restore_standard_config(pci_dev);
-	pci_fixup_device(pci_fixup_resume_early, pci_dev);
-}
-
 static void pci_pm_default_resume(struct pci_dev *pci_dev)
 {
 	pci_fixup_device(pci_fixup_resume, pci_dev);
@@ -607,6 +613,13 @@ static void pci_pm_complete(struct devic
 		drv->pm->complete(dev);
 }
 
+#else /* !CONFIG_PM_SLEEP */
+
+#define pci_pm_prepare	NULL
+#define pci_pm_complete	NULL
+
+#endif /* !CONFIG_PM_SLEEP */
+
 #ifdef CONFIG_SUSPEND
 
 static int pci_pm_suspend(struct device *dev)
@@ -943,8 +956,6 @@ static int pci_pm_restore(struct device 
 
 #endif /* !CONFIG_HIBERNATION */
 
-#endif /* !CONFIG_PM_SLEEP */
-
 #ifdef CONFIG_PM_RUNTIME
 
 static int pci_pm_runtime_suspend(struct device *dev)

  reply	other threads:[~2010-01-19 23:04 UTC|newest]

Thread overview: 12+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2010-01-18  8:57 linux-next: Tree for January 18 Stephen Rothwell
2010-01-18 14:21 ` [-next Jan 18] Boot failure on s390 with DEVTMPFS=y Sachin Sant
2010-01-18 14:31   ` Kay Sievers
2010-01-19 21:14     ` Greg KH
2010-01-19 23:49       ` Stephen Rothwell
2010-01-18 23:44 ` linux-next: Tree for January 18 (pci + pm) Randy Dunlap
2010-01-19 23:04   ` Rafael J. Wysocki [this message]
2010-01-20  4:39     ` Jesse Barnes
2010-01-20  5:20       ` Stephen Rothwell
2010-01-20 16:53     ` Randy Dunlap
2010-01-28 16:33     ` Randy Dunlap
2010-01-28 19:04       ` Jesse Barnes

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=201001200004.07654.rjw@sisk.pl \
    --to=rjw@sisk.pl \
    --cc=jbarnes@virtuousgeek.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-next@vger.kernel.org \
    --cc=linux-pci@vger.kernel.org \
    --cc=randy.dunlap@oracle.com \
    --cc=sfr@canb.auug.org.au \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).