Re: linux-next: manual merge of the tty tree with the tty.current tree

[Greg KH <greg@kroah.com>]

On Tue, Jul 09, 2024 at 03:37:47PM +1000, Stephen Rothwell wrote:
> Hi all,
> 
> Today's linux-next merge of the tty tree got a conflict in:
> 
>   drivers/tty/serial/imx.c
> 
> between commit:
> 
>   9706fc87b4cf ("serial: imx: only set receiver level if it is zero")
> 
> from the tty.current tree and commit:
> 
>   3093f180bc6e ("serial: imx: stop casting struct uart_port to struct imx_port")
> 
> from the tty tree.
> 
> I fixed it up (see below) and can carry the fix as necessary. This
> is now fixed as far as linux-next is concerned, but any non trivial
> conflicts should be mentioned to your upstream maintainer when your tree
> is submitted for merging.  You may also want to consider cooperating
> with the maintainer of the conflicting tree to minimise any particularly
> complex conflicts.
> 
> -- 
> Cheers,
> Stephen Rothwell
> 
> diff --cc drivers/tty/serial/imx.c
> index ff32cd2d2863,d96f0524f7fb..000000000000
> --- a/drivers/tty/serial/imx.c
> +++ b/drivers/tty/serial/imx.c
> @@@ -1549,10 -1553,9 +1554,10 @@@ static int imx_uart_startup(struct uart
>   
>   static void imx_uart_shutdown(struct uart_port *port)
>   {
> - 	struct imx_port *sport = (struct imx_port *)port;
> + 	struct imx_port *sport = to_imx_port(port);
>   	unsigned long flags;
>   	u32 ucr1, ucr2, ucr4, uts;
>  +	int loops;
>   
>   	if (sport->dma_is_enabled) {
>   		dmaengine_terminate_sync(sport->dma_chan_tx);
> @@@ -1984,8 -1937,8 +1989,8 @@@ static void imx_uart_poll_put_char(stru
>   static int imx_uart_rs485_config(struct uart_port *port, struct ktermios *termios,
>   				 struct serial_rs485 *rs485conf)
>   {
> - 	struct imx_port *sport = (struct imx_port *)port;
> + 	struct imx_port *sport = to_imx_port(port);
>  -	u32 ucr2;
>  +	u32 ucr2, ufcr;
>   
>   	if (rs485conf->flags & SER_RS485_ENABLED) {
>   		/* Enable receiver if low-active RTS signal is requested */



Looks good, thanks!

greg k-h