next-0702: ACPI Error (nseval-0159): Insufficient arguments

next-0702: ACPI Error (nseval-0159): Insufficient arguments

[Alexander Beregalov]

Hi

I have several these messages.
It is Dual-Core Opteron 1214.

CONFIG_ACPI=y
CONFIG_ACPI_DOCK=y
CONFIG_ACPI_BLACKLIST_YEAR=0
CONFIG_ACPI_EC=y
CONFIG_ACPI_POWER=y
CONFIG_ACPI_SYSTEM=y
CONFIG_PNPACPI=y

Let me know if you need more info.

[    0.888708] WARNING: at nseval:159 acpi_ut_error+0x32/0xa2()
[    0.888708] Modules linked in:
[    0.888708] Pid: 1, comm: swapper Not tainted 2.6.26-rc8-next-20080702 #1
[    0.888708]
[    0.888708] Call Trace:
[    0.888708]  [<ffffffff8022f47b>] warn_on_slowpath+0x58/0x87
[    0.888708]  [<ffffffff8024ea02>] ? __lock_acquire+0xd25/0xd71
[    0.888708]  [<ffffffff8027f79e>] ? check_bytes_and_report+0x38/0xcb
[    0.888708]  [<ffffffff803606c8>] ? acpi_ns_get_node+0x94/0xa4
[    0.888708]  [<ffffffff8027fbf5>] ? check_object+0x15a/0x245
[    0.888708]  [<ffffffff8027f483>] ? init_object+0x6e/0x77
[    0.888708]  [<ffffffff8024d875>] ? trace_hardirqs_on+0xd/0xf
[    0.888708]  [<ffffffff80366be9>] acpi_ut_error+0x32/0xa2
[    0.888708]  [<ffffffff8024d875>] ? trace_hardirqs_on+0xd/0xf
[    0.888708]  [<ffffffff803606c8>] ? acpi_ns_get_node+0x94/0xa4
[    0.888708]  [<ffffffff803606c8>] ? acpi_ns_get_node+0x94/0xa4
[    0.888708]  [<ffffffff8024d83d>] ? trace_hardirqs_on_caller+0xf9/0x124
[    0.888708]  [<ffffffff8024d875>] ? trace_hardirqs_on+0xd/0xf
[    0.888708]  [<ffffffff80367740>] ?
acpi_ut_copy_eobject_to_iobject+0x18c/0x20a
[    0.888708]  [<ffffffff803668f1>] ? acpi_ut_valid_acpi_name+0x1f/0x3c
[    0.888708]  [<ffffffff8035fefe>] acpi_ns_evaluate+0x10e/0x1b4
[    0.888708]  [<ffffffff8035fa4e>] acpi_evaluate_object+0x136/0x1f4
[    0.888708]  [<ffffffff8027fbf5>] ? check_object+0x15a/0x245
[    0.888708]  [<ffffffff8034d710>] acpi_run_osc+0xa5/0x16b
[    0.888708]  [<ffffffff8034d866>] pci_osc_control_set+0x90/0xa7
[    0.888708]  [<ffffffff80349446>] aer_osc_setup+0x66/0xbc
[    0.888708]  [<ffffffff80348533>] aer_init+0x9/0x1f
[    0.888708]  [<ffffffff80469042>] aer_probe+0x13/0x16d
[    0.888708]  [<ffffffff80347d0a>] pcie_port_probe_service+0x3a/0x84
[    0.888708]  [<ffffffff8038ed99>] driver_probe_device+0xd9/0x169
[    0.888708]  [<ffffffff8038ee78>] __driver_attach+0x4f/0x79
[    0.888708]  [<ffffffff8038ee29>] ? __driver_attach+0x0/0x79
[    0.888708]  [<ffffffff8038e3e8>] bus_for_each_dev+0x4d/0x7e
[    0.888708]  [<ffffffff8038ebc7>] driver_attach+0x1c/0x1e
[    0.888708]  [<ffffffff8038e876>] bus_add_driver+0xba/0x210
[    0.888708]  [<ffffffff805f2ec2>] ? aer_service_init+0x0/0x20
[    0.888708]  [<ffffffff8038f056>] driver_register+0x93/0x10a
[    0.888708]  [<ffffffff805f2ec2>] ? aer_service_init+0x0/0x20
[    0.888708]  [<ffffffff803477eb>] pcie_port_service_register+0x47/0x49
[    0.888708]  [<ffffffff805f2ee0>] aer_service_init+0x1e/0x20
[    0.888708]  [<ffffffff805e0963>] kernel_init+0x142/0x29d
[    0.888708]  [<ffffffff8024d83d>] ? trace_hardirqs_on_caller+0xf9/0x124
[    0.888708]  [<ffffffff8024d875>] ? trace_hardirqs_on+0xd/0xf
[    0.888708]  [<ffffffff8046f968>] ? _spin_unlock_irq+0x2b/0x31
[    0.888708]  [<ffffffff8046f30e>] ? trace_hardirqs_on_thunk+0x3a/0x3f
[    0.888708]  [<ffffffff8024d83d>] ? trace_hardirqs_on_caller+0xf9/0x124
[    0.888708]  [<ffffffff8020c0a8>] child_rip+0xa/0x12
[    0.888708]  [<ffffffff8020b7bf>] ? restore_args+0x0/0x30
[    0.888708]  [<ffffffff805e0821>] ? kernel_init+0x0/0x29d
[    0.888708]  [<ffffffff8020c09e>] ? child_rip+0x0/0x12
[    0.888708]
[    0.888708] ---[ end trace a7919e7f17c0a725 ]---
[    0.888708] ACPI Error (nseval-0159): Insufficient arguments -
method [_OSC] needs 5, found 4 [20080609]
[    0.888708] aer 0000:00:0a.0:pcie01: AER service couldn't init
device: _OSC failed

Re: next-0702: ACPI Error (nseval-0159): Insufficient arguments

[Andi Kleen]

Alexander Beregalov wrote:
> Hi
> 
> I have several these messages.
> It is Dual-Core Opteron 1214.
> 
> CONFIG_ACPI=y
> CONFIG_ACPI_DOCK=y
> CONFIG_ACPI_BLACKLIST_YEAR=0
> CONFIG_ACPI_EC=y
> CONFIG_ACPI_POWER=y
> CONFIG_ACPI_SYSTEM=y
> CONFIG_PNPACPI=y
> 
> Let me know if you need more info.
> 
> [    0.888708] WARNING: at nseval:159 acpi_ut_error+0x32/0xa2()

Andrew, that's the bad side effect I talked about earlier. Now the
warning doesn't report the right place, but just the error function
and it's unclear who causes it due to the unreliable backtrace.

Alexander,

Is this something that you didn't see in older kernels? If yes when did 
it start?

Can you please file a full report in http://bugzilla.kernel.org?

Thanks,
-Andi

Re: next-0702: ACPI Error (nseval-0159): Insufficient arguments

[Alexander Beregalov]

2008/7/3 Andi Kleen <ak@linux.intel.com>:
> Is this something that you didn't see in older kernels? If yes when did it
> start?
It is the first kernel I tried to run on this host.

> Can you please file a full report in http://bugzilla.kernel.org?
Sure

Re: next-0702: ACPI Error (nseval-0159): Insufficient arguments

[Alexander Beregalov]

2008/7/3 Alexander Beregalov <a.beregalov@gmail.com>:
>> Can you please file a full report in http://bugzilla.kernel.org?
http://bugzilla.kernel.org/show_bug.cgi?id=11032