From mboxrd@z Thu Jan 1 00:00:00 1970 From: Andi Kleen Subject: Re: linux-next: Tree for September 5 Date: Sat, 06 Sep 2008 02:07:47 +0200 Message-ID: <48C1C9D3.6000009@linux.intel.com> References: <20080905190941.0f86ebac.sfr@canb.auug.org.au> <200809060047.18770.bzolnier@gmail.com> Mime-Version: 1.0 Content-Type: text/plain; charset=UTF-8; format=flowed Content-Transfer-Encoding: 7bit Return-path: Received: from mga10.intel.com ([192.55.52.92]:55996 "EHLO fmsmga102.fm.intel.com" rhost-flags-OK-OK-OK-FAIL) by vger.kernel.org with ESMTP id S1751640AbYIFAIA (ORCPT ); Fri, 5 Sep 2008 20:08:00 -0400 In-Reply-To: <200809060047.18770.bzolnier@gmail.com> Sender: linux-next-owner@vger.kernel.org List-ID: To: Bartlomiej Zolnierkiewicz Cc: Stephen Rothwell , linux-next@vger.kernel.org, LKML , lenb@kernel.org, Alexey Starikovskiy Bartlomiej Zolnierkiewicz wrote: > Hi, > > On Friday 05 September 2008, Stephen Rothwell wrote: >> Hi all, >> >> There will be no linux-next tree until at least September 9 (US Central >> time) as I will be travelling. >> >> Changes since next-20080904: > > The following commit: > > commit 50c0f43ff1199bbea5f0418d40df32f4d4029b13 > Author: Andi Kleen > Date: Thu Sep 4 15:13:29 2008 +0200 > > ACPI: EC: do transaction from interrupt context > > From: Alexey Starikovskiy > > It is easier and faster to do transaction directly from interrupt context > rather than waking control thread. > Also, cleaner GPE storm avoidance is implemented. > > AK: Merged with earlier io port patch > > Signed-off-by: Alexey Starikovskiy > Signed-off-by: Andi Kleen > > makes my laptop *power-off* on haldaemon startup (Fedora 9 here). Thanks for testing. There were some negative review comments for that patchkit on linux-acpi, perhaps it's related to that. I'm leaving it for Len to handle. He's handling the ACPI tree again starting with today. I suppose it can just be dropped for now from test. -Andi > dmesg with the commit reverted: > > Linux version 2.6.27-rc5-next-20080905-04648-ge9f2a9c (bzolnier@localhost.localdomain) (gcc version 4.3.0 20080428 (Red Hat 4.3.0-8) (GCC) ) #223 PREEMPT Sat Sep 6 00:19:40 CEST 2008 > BIOS-provided physical RAM map: > BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) > BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) > BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) > BIOS-e820: 0000000000100000 - 000000001fff0000 (usable) > BIOS-e820: 000000001fff0000 - 000000001fffffc0 (ACPI data) > BIOS-e820: 000000001fffffc0 - 0000000020000000 (ACPI NVS) > BIOS-e820: 00000000ffb80000 - 00000000ffc00000 (reserved) > BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved) > last_pfn = 0x1fff0 max_arch_pfn = 0x100000 > kernel direct mapping tables up to 1fff0000 @ 7000-d000 > DMI 2.3 present. > ACPI: RSDP 000E6010, 0014 (r0 OID_00) > ACPI: RSDT 1FFFA7F0, 0034 (r1 INSYDE RSDT_000 1 _CSI 10101) > ACPI: FACP 1FFFFB00, 0074 (r1 ACER DCL56 200 _CSI 10101) > ACPI: DSDT 1FFFAC70, 4E8A (r1 ACER TM_290 6 MSFT 100000E) > ACPI: FACS 1FFFFFC0, 0040 > ACPI: BOOT 1FFFFB90, 0028 (r1 INSYDE SYS_BOOT 100 _CSI 10101) > ACPI: DBGP 1FFFFBC0, 0034 (r1 INSYDE DBGP_000 100 _CSI 10101) > ACPI: SSDT 1FFFA830, 0192 (r1 INSYDE GV3Ref 2000 INTL 20021002) > ACPI: DMI detected: Acer > 511MB LOWMEM available. > mapped low ram: 0 - 1fff0000 > low ram: 00000000 - 1fff0000 > bootmap 00001000 - 00005000 > (6 early reservations) ==> bootmem [0000000000 - 001fff0000] > #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] > #1 [0000100000 - 000045dc5c] TEXT DATA BSS ==> [0000100000 - 000045dc5c] > #2 [000045e000 - 0000461000] INIT_PG_TABLE ==> [000045e000 - 0000461000] > #3 [000009fc00 - 0000100000] BIOS reserved ==> [000009fc00 - 0000100000] > #4 [0000007000 - 0000009000] PGTABLE ==> [0000007000 - 0000009000] > #5 [0000001000 - 0000005000] BOOTMAP ==> [0000001000 - 0000005000] > Zone PFN ranges: > DMA 0x00000000 -> 0x00001000 > Normal 0x00001000 -> 0x0001fff0 > Movable zone start PFN for each node > early_node_map[2] active PFN ranges > 0: 0x00000000 -> 0x0000009f > 0: 0x00000100 -> 0x0001fff0 > On node 0 totalpages: 130959 > free_area_init_node: node 0, pgdat c03cdbd8, node_mem_map c1000000 > DMA zone: 3967 pages, LIFO batch:0 > Normal zone: 125968 pages, LIFO batch:31 > ACPI: PM-Timer IO Port: 0x1008 > Local APIC disabled by BIOS -- reenabling. > Found and enabled local APIC! > Allocating PCI resources starting at 30000000 (gap: 20000000:dfb80000) > dyn_array 0xc041a240 size:0xc nr:256 align:0x1000 > dyn_array 0xc041a10c size:0x1c nr:32 align:0x1000 > dyn_array 0xc044d9b0 size:0x48 nr:32 align:0x1000 > dyn_array total_size: 0x3000 > dyn_array 0xc041a240 ==> [0x1402000 - 0x1402c00] > dyn_array 0xc041a10c ==> [0x1403000 - 0x1403380] > dyn_array 0xc044d9b0 ==> [0x1404000 - 0x1404900] > kstat_irqs ==> [0x1405000 - 0x1405080] > Built 1 zonelists in Zone order, mobility grouping on. Total pages: 129935 > Kernel command line: ro vga=0x318 lapic pci=assign-busses > Enabling fast FPU save and restore... done. > Enabling unmasked SIMD FPU exception support... done. > Initializing CPU#0 > found new irq_desc for irq 0 > found new irq_desc for irq 1 > found new irq_desc for irq 2 > found new irq_desc for irq 3 > found new irq_desc for irq 4 > found new irq_desc for irq 5 > found new irq_desc for irq 6 > found new irq_desc for irq 7 > found new irq_desc for irq 8 > found new irq_desc for irq 9 > found new irq_desc for irq 10 > found new irq_desc for irq 11 > found new irq_desc for irq 12 > found new irq_desc for irq 13 > found new irq_desc for irq 14 > found new irq_desc for irq 15 > CPU 0 irqstacks, hard=c040e000 soft=c040d000 > PID hash table entries: 2048 (order: 11, 8192 bytes) > TSC: PIT calibration confirmed by PMTIMER. > TSC: using PIT calibration value > Detected 1495.140 MHz processor. > Console: colour dummy device 80x25 > console [tty0] enabled > Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) > Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) > Memory: 515676k/524224k available (2047k kernel code, 8000k reserved, 852k data, 208k init, 0k highmem) > virtual kernel memory layout: > fixmap : 0xfffb9000 - 0xfffff000 ( 280 kB) > vmalloc : 0xe07f0000 - 0xfffb7000 ( 503 MB) > lowmem : 0xc0000000 - 0xdfff0000 ( 511 MB) > .init : 0xc03d6000 - 0xc040a000 ( 208 kB) > .data : 0xc02ffd05 - 0xc03d4de0 ( 852 kB) > .text : 0xc0100000 - 0xc02ffd05 (2047 kB) > Checking if this processor honours the WP bit even in supervisor mode...Ok. > CPA: page pool initialized 1 of 1 pages preallocated > Calibrating delay loop (skipped), value calculated using timer frequency.. 2990.28 BogoMIPS (lpj=5980560) > Mount-cache hash table entries: 512 > CPU: L1 I cache: 32K, L1 D cache: 32K > CPU: L2 cache: 2048K > Intel machine check architecture supported. > Intel machine check reporting enabled on CPU#0. > CPU: Intel(R) Pentium(R) M processor 1.50GHz stepping 06 > Checking 'hlt' instruction... OK. > Freeing SMP alternatives: 0k freed > ACPI: Core revision 20080729 > ACPI: setting ELCR to 0200 (from 0c00) > net_namespace: 612 bytes > NET: Registered protocol family 16 > No dock devices found. > ACPI: bus type pci registered > PCI: PCI BIOS revision 2.10 entry at 0xe97a4, last bus=2 > PCI: Using configuration type 1 for base access > ------------[ cut here ]------------ > WARNING: at fs/sysfs/dir.c:465 sysfs_add_one+0x27/0x2f() > sysfs: duplicate filename 'acpi' can not be created > Modules linked in: > Pid: 1, comm: swapper Not tainted 2.6.27-rc5-next-20080905-04648-ge9f2a9c #223 > [] warn_slowpath+0x5a/0x7b > [] update_curr+0x3d/0x5d > [] __dequeue_entity+0x1f/0x71 > [] idr_get_empty_slot+0x154/0x202 > [] ida_get_new_above+0xdf/0x17b > [] sysfs_ilookup_test+0x0/0xd > [] ifind+0x15/0x8a > [] sysfs_find_dirent+0x13/0x23 > [] sysfs_add_one+0x27/0x2f > [] create_dir+0x3c/0x6b > [] sysfs_create_dir+0x29/0x3b > [] kobject_get+0xf/0x13 > [] kobject_add_internal+0xb8/0x151 > [] kobject_init_and_add+0x23/0x25 > [] kernel_param_sysfs_setup+0x4f/0x9f > [] param_sysfs_init+0xef/0x141 > [] _stext+0x3a/0x12a > [] param_sysfs_init+0x0/0x141 > [] __enqueue_entity+0xa8/0xe2 > [] __create_workqueue_key+0x14d/0x162 > [] kernel_init+0xec/0x150 > [] kernel_init+0x0/0x150 > [] kernel_thread_helper+0x7/0x10 > ======================= > ---[ end trace 4eaa2a86a8e2da22 ]--- > kobject_add_internal failed for acpi with -EEXIST, don't try to register things with the same name in the same directory. > Pid: 1, comm: swapper Tainted: G W 2.6.27-rc5-next-20080905-04648-ge9f2a9c #223 > [] kobject_add_internal+0x141/0x151 > [] kobject_init_and_add+0x23/0x25 > [] kernel_param_sysfs_setup+0x4f/0x9f > [] param_sysfs_init+0xef/0x141 > [] _stext+0x3a/0x12a > [] param_sysfs_init+0x0/0x141 > [] __enqueue_entity+0xa8/0xe2 > [] __create_workqueue_key+0x14d/0x162 > [] kernel_init+0xec/0x150 > [] kernel_init+0x0/0x150 > [] kernel_thread_helper+0x7/0x10 > ======================= > Module 'acpi' failed to be added to sysfs, error number -17 > The system will be unstable now. > ACPI: EC: Look up EC in DSDT > ACPI: Interpreter enabled > ACPI: (supports S0 S1 S3 S5) > ACPI: Using PIC for interrupt routing > ACPI: EC: GPE = 0x1c, I/O: command/status = 0x66, data = 0x62 > ACPI: EC: driver started in poll mode > ACPI: PCI Root Bridge [PCI0] (0000:00) > pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold > pci 0000:00:1d.7: PME# disabled > HPET not enabled in BIOS. You might try hpet=force boot option > pci 0000:00:1f.0: quirk: region 1000-107f claimed by ICH4 ACPI/GPIO/TCO > pci 0000:00:1f.0: quirk: region 1300-133f claimed by ICH4 GPIO > pci 0000:00:1f.5: PME# supported from D0 D3hot D3cold > pci 0000:00:1f.5: PME# disabled > pci 0000:00:1f.6: PME# supported from D0 D3hot D3cold > pci 0000:00:1f.6: PME# disabled > pci 0000:01:00.0: supports D1 D2 > PCI: bridge 0000:00:01.0 io port: [c000, dfff] > PCI: bridge 0000:00:01.0 32bit mmio: [e0000000, efffffff] > PCI: bridge 0000:00:01.0 32bit mmio pref: [a0000000, afffffff] > pci 0000:02:00.0: supports D2 > pci 0000:02:00.0: PME# supported from D2 D3hot D3cold > pci 0000:02:00.0: PME# disabled > pci 0000:02:01.0: supports D1 D2 > pci 0000:02:01.0: PME# supported from D1 D2 D3hot D3cold > pci 0000:02:01.0: PME# disabled > pci 0000:02:02.0: PME# supported from D0 D3hot D3cold > pci 0000:02:02.0: PME# disabled > pci 0000:02:03.0: supports D1 D2 > pci 0000:02:03.0: PME# supported from D0 D1 D2 D3hot D3cold > pci 0000:02:03.0: PME# disabled > pci 0000:00:1e.0: transparent bridge > PCI: bridge 0000:00:1e.0 io port: [a000, bfff] > PCI: bridge 0000:00:1e.0 32bit mmio: [d0000000, dfffffff] > PCI: bridge 0000:00:1e.0 32bit mmio pref: [90000000, 9fffffff] > bus 00 -> node 0 > ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] > ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGPB._PRT] > ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB_._PRT] > ACPI: PCI Interrupt Link [LNKA] (IRQs 5 *10) > ACPI: PCI Interrupt Link [LNKB] (IRQs 5 10) *11 > ACPI: PCI Interrupt Link [LNKC] (IRQs 5 10) *11 > ACPI: PCI Interrupt Link [LNKD] (IRQs 5 10) *11 > ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled. > ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled. > ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled. > ACPI: PCI Interrupt Link [LNKH] (IRQs 5 10) *11 > Linux Plug and Play Support v0.97 (c) Adam Belay > pnp: PnP ACPI init > ACPI: bus type pnp registered > pnp: PnP ACPI: found 10 devices > ACPI: ACPI bus type pnp unregistered > SCSI subsystem initialized > libata version 3.00 loaded. > usbcore: registered new interface driver usbfs > usbcore: registered new interface driver hub > usbcore: registered new device driver usb > PCI: Using ACPI for IRQ routing > pci 0000:02:03.0: BAR 0: can't allocate resource > system 00:01: ioport range 0x1000-0x107f has been reserved > system 00:01: ioport range 0x1300-0x133f has been reserved > system 00:01: ioport range 0x200-0x20f has been reserved > system 00:01: ioport range 0x4d0-0x4d1 has been reserved > system 00:01: ioport range 0xfe00-0xfe00 has been reserved > system 00:01: ioport range 0xff2c-0xff2f has been reserved > system 00:01: iomem range 0xfff80000-0xffffffff could not be reserved > pci 0000:00:01.0: PCI bridge, secondary bus 0000:01 > pci 0000:00:01.0: IO window: 0xc000-0xdfff > pci 0000:00:01.0: MEM window: 0xe0000000-0xefffffff > pci 0000:00:01.0: PREFETCH window: 0x000000a0000000-0x000000afffffff > pci 0000:02:03.0: CardBus bridge, secondary bus 0000:03 > pci 0000:02:03.0: IO window: 0x00a400-0x00a4ff > pci 0000:02:03.0: IO window: 0x00a800-0x00a8ff > pci 0000:02:03.0: PREFETCH window: 0x90000000-0x93ffffff > pci 0000:02:03.0: MEM window: 0xd4000000-0xd7ffffff > pci 0000:00:1e.0: PCI bridge, secondary bus 0000:02 > pci 0000:00:1e.0: IO window: 0xa000-0xbfff > pci 0000:00:1e.0: MEM window: 0xd0000000-0xdfffffff > pci 0000:00:1e.0: PREFETCH window: 0x00000090000000-0x0000009fffffff > pci 0000:00:1e.0: setting latency timer to 64 > ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 10 > PCI: setting IRQ 10 as level-triggered > pci 0000:02:03.0: PCI INT A -> Link[LNKC] -> GSI 10 (level, low) -> IRQ 10 > bus: 00 index 0 io port: [0, ffff] > bus: 00 index 1 mmio: [0, ffffffff] > bus: 01 index 0 io port: [c000, dfff] > bus: 01 index 1 mmio: [e0000000, efffffff] > bus: 01 index 2 mmio: [a0000000, afffffff] > bus: 01 index 3 mmio: [0, 0] > bus: 02 index 0 io port: [a000, bfff] > bus: 02 index 1 mmio: [d0000000, dfffffff] > bus: 02 index 2 mmio: [90000000, 9fffffff] > bus: 02 index 3 io port: [0, ffff] > bus: 02 index 4 mmio: [0, ffffffff] > bus: 03 index 0 io port: [a400, a4ff] > bus: 03 index 1 io port: [a800, a8ff] > bus: 03 index 2 mmio: [90000000, 93ffffff] > bus: 03 index 3 mmio: [d4000000, d7ffffff] > NET: Registered protocol family 2 > IP route cache hash table entries: 4096 (order: 2, 16384 bytes) > TCP established hash table entries: 16384 (order: 5, 131072 bytes) > TCP bind hash table entries: 16384 (order: 4, 65536 bytes) > TCP: Hash tables configured (established 16384 bind 16384) > TCP reno registered > NET: Registered protocol family 1 > pci 0000:01:00.0: Boot video device > ACPI: Battery Slot [BAT1] (battery present) > input: Power Button (FF) as /class/input/input0 > ACPI: Power Button (FF) [PWRF] > ACPI Error (evxfevnt-0186): Could not enable SleepButton event [20080729] > ACPI Warning (evxface-0145): Could not enable fixed event 3 [20080729] > input: Lid Switch as /class/input/input1 > ACPI: Lid Switch [LID] > input: Power Button (CM) as /class/input/input2 > ACPI: Power Button (CM) [PWRB] > Simple Boot Flag at 0x37 set to 0x1 > Machine check exception polling timer started. > alg: cipher: Test 1 failed on encryption for aes-asm > 00000000: 00 01 02 03 04 05 06 07 08 08 08 08 08 08 08 08 > audit: initializing netlink socket (disabled) > type=2000 audit(1220653912.172:1): initialized > HugeTLB registered 4 MB page size, pre-allocated 0 pages > fuse init (API version 7.9) > msgmni has been set to 1007 > alg: No test for stdrng (krng) > io scheduler noop registered > io scheduler anticipatory registered (default) > io scheduler deadline registered > io scheduler cfq registered > vesafb: framebuffer at 0xa8000000, mapped to 0xe0880000, using 4608k, total 65536k > vesafb: mode is 1024x768x24, linelength=3072, pages=27 > vesafb: protected mode interface info at c000:5673 > vesafb: pmi: set display start = c00c56e1, set palette = c00c571b > vesafb: pmi: ports = c010 c016 c054 c038 c03c c05c c000 c004 c0b0 c0b2 c0b4 > vesafb: scrolling: redraw > vesafb: Truecolor: size=0:8:8:8, shift=0:16:8:0 > Console: switching to colour frame buffer device 128x48 > fb0: VESA VGA frame buffer device > ACPI: AC Adapter [ACAD] (off-line) > ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3] C4[C3]) > processor ACPI0007:00: registered as cooling_device0 > ACPI: Processor [CPU0] (supports 8 throttling states) > isapnp: Scanning for PnP cards... > isapnp: No Plug & Play device found > Real Time Clock Driver v1.12ac > Linux agpgart interface v0.103 > agpgart-intel 0000:00:00.0: Intel 855PM Chipset > agpgart-intel 0000:00:00.0: AGP aperture is 64M @ 0xb0000000 > Serial: 8250/16550 driver4 ports, IRQ sharing enabled > Switched to NOHz mode on CPU #0 > serial8250: ttyS1 at I/O 0x2f8 (irq = 0) is a 16550A > ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 10 > serial 0000:00:1f.6: PCI INT B -> Link[LNKB] -> GSI 10 (level, low) -> IRQ 10 > serial 0000:00:1f.6: PCI INT B disabled > 8139too Fast Ethernet driver 0.9.28 > ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 10 > 8139too 0000:02:01.0: PCI INT A -> Link[LNKD] -> GSI 10 (level, low) -> IRQ 10 > eth0: RealTek RTL8139 at 0xa000, 00:02:3f:18:5a:a6, IRQ 10 > eth0: Identified 8139 chip type 'RTL-8100B/8139D' > Uniform Multi-Platform E-IDE driver > piix 0000:00:1f.1: IDE controller (0x8086:0x24ca rev 0x03) > pci 0000:00:1f.1: enabling device (0005 -> 0007) > pci 0000:00:1f.1: PCI INT A -> Link[LNKC] -> GSI 10 (level, low) -> IRQ 10 > piix 0000:00:1f.1: not 100% native mode: will probe irqs later > ide0: BM-DMA at 0x1100-0x1107 > ide1: BM-DMA at 0x1108-0x110f > Probing IDE interface ide0... > hda: IC25N060ATMR04-0, ATA DISK drive > hda: host max PIO4 wanted PIO255(auto-tune) selected PIO4 > hda: UDMA/100 mode selected > Probing IDE interface ide1... > hdc: TOSHIBA ODD-DVD SD-R6372, ATAPI CD/DVD-ROM drive > hdc: host max PIO4 wanted PIO255(auto-tune) selected PIO4 > hdc: UDMA/33 mode selected > ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 > ide1 at 0x170-0x177,0x376 on irq 15 > ide_generic: please use "probe_mask=0x3f" module parameter for probing all legacy ISA IDE ports > hda: max request size: 512KiB > hda: 117210240 sectors (60011 MB) w/7884KiB Cache, CHS=16383/255/63 > hda: cache flushes supported > hda: hda1 hda2 hda3 hda4 < hda5 hda6 > > Driver 'sd' needs updating - please use bus_type methods > Driver 'sr' needs updating - please use bus_type methods > PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSE0] at 0x60,0x64 irq 1,12 > i8042.c: Detected active multiplexing controller, rev 1.1. > serio: i8042 KBD port at 0x60,0x64 irq 1 > serio: i8042 AUX0 port at 0x60,0x64 irq 12 > serio: i8042 AUX1 port at 0x60,0x64 irq 12 > serio: i8042 AUX2 port at 0x60,0x64 irq 12 > serio: i8042 AUX3 port at 0x60,0x64 irq 12 > mice: PS/2 mouse device common for all mice > input: AT Translated Set 2 keyboard as /class/input/input3 > device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: dm-devel@redhat.com > cpuidle: using governor ladder > cpuidle: using governor menu > usbcore: registered new interface driver usbhid > usbhid: v2.6:USB HID core driver > ip_tables: (C) 2000-2006 Netfilter Core Team > TCP bic registered > NET: Registered protocol family 17 > NET: Registered protocol family 15 > ieee80211: 802.11 data/management/control stack, git-1.1.13 > ieee80211: Copyright (C) 2004-2005 Intel Corporation > ieee80211_crypt: registered algorithm 'NULL' > ieee80211_crypt: registered algorithm 'WEP' > IO APIC resources could be not be allocated. > Using IPI Shortcut mode > Marking TSC unstable due to TSC halts in idle > Clocksource tsc unstable (delta = -77171083 ns) > Synaptics Touchpad, model: 1, fw: 5.9, id: 0x254ab1, caps: 0x804713/0x0 > input: SynPS/2 Synaptics TouchPad as /class/input/input4 > EXT3-fs: INFO: recovery required on readonly filesystem. > EXT3-fs: write access will be enabled during recovery. > kjournald starting. Commit interval 5 seconds > EXT3-fs: recovery complete. > EXT3-fs: mounted filesystem with ordered data mode. > VFS: Mounted root (ext3 filesystem) readonly. > Freeing unused kernel memory: 208k freed > USB Universal Host Controller Interface driver v3.0 > ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 10 > uhci_hcd 0000:00:1d.0: PCI INT A -> Link[LNKA] -> GSI 10 (level, low) -> IRQ 10 > uhci_hcd 0000:00:1d.0: setting latency timer to 64 > uhci_hcd 0000:00:1d.0: UHCI Host Controller > uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1 > uhci_hcd 0000:00:1d.0: irq 10, io base 0x00001200 > usb usb1: configuration #1 chosen from 1 choice > hub 1-0:1.0: USB hub found > hub 1-0:1.0: 2 ports detected > uhci_hcd 0000:00:1d.1: PCI INT B -> Link[LNKD] -> GSI 10 (level, low) -> IRQ 10 > uhci_hcd 0000:00:1d.1: setting latency timer to 64 > uhci_hcd 0000:00:1d.1: UHCI Host Controller > uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2 > uhci_hcd 0000:00:1d.1: irq 10, io base 0x00001600 > usb usb2: configuration #1 chosen from 1 choice > hub 2-0:1.0: USB hub found > hub 2-0:1.0: 2 ports detected > ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 10 > ehci_hcd 0000:00:1d.7: PCI INT D -> Link[LNKH] -> GSI 10 (level, low) -> IRQ 10 > ehci_hcd 0000:00:1d.7: setting latency timer to 64 > ehci_hcd 0000:00:1d.7: EHCI Host Controller > ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 3 > ehci_hcd 0000:00:1d.7: debug port 1 > ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported > ehci_hcd 0000:00:1d.7: irq 10, io mem 0xf4000000 > ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 > usb usb3: configuration #1 chosen from 1 choice > hub 3-0:1.0: USB hub found > hub 3-0:1.0: 6 ports detected > parport_pc 00:09: reported by Plug and Play ACPI > parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE,EPP] > ipw2200: Intel(R) PRO/Wireless 2200/2915 Network Driver, 1.2.2k > ipw2200: Copyright(c) 2003-2006 Intel Corporation > uhci_hcd 0000:00:1d.2: PCI INT C -> Link[LNKC] -> GSI 10 (level, low) -> IRQ 10 > uhci_hcd 0000:00:1d.2: setting latency timer to 64 > uhci_hcd 0000:00:1d.2: UHCI Host Controller > uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 > uhci_hcd 0000:00:1d.2: irq 10, io base 0x00001700 > usb usb4: configuration #1 chosen from 1 choice > hub 4-0:1.0: USB hub found > hub 4-0:1.0: 2 ports detected > hdc: ATAPI 24X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache > Uniform CD-ROM driver Revision: 3.20 > ppdev: user-space parallel port driver > yenta_cardbus 0000:02:03.0: CardBus bridge found [1025:005a] > yenta_cardbus 0000:02:03.0: Using CSCINT to route CSC interrupts to PCI > yenta_cardbus 0000:02:03.0: Routing CardBus interrupts to PCI > yenta_cardbus 0000:02:03.0: TI: mfunc 0x001c1112, devctl 0x44 > yenta_cardbus 0000:02:03.0: ISA IRQ mask 0x0860, PCI irq 10 > yenta_cardbus 0000:02:03.0: Socket status: 30000006 > yenta_cardbus 0000:02:03.0: pcmcia: parent PCI bridge I/O window: 0xa000 - 0xbfff > : cs: IO port probe 0xa000-0xbfff: clean. > yenta_cardbus 0000:02:03.0: pcmcia: parent PCI bridge Memory window: 0xd0000000 - 0xdfffffff > yenta_cardbus 0000:02:03.0: pcmcia: parent PCI bridge Memory window: 0x90000000 - 0x9fffffff > ipw2200 0000:02:02.0: power state changed by ACPI to D0 > ipw2200 0000:02:02.0: PCI INT A -> Link[LNKC] -> GSI 10 (level, low) -> IRQ 10 > ipw2200: Detected Intel PRO/Wireless 2200BG Network Connection > firmware: requesting ipw2200-bss.fw > ipw2200: Radio Frequency Kill Switch is On: > Kill switch must be turned off for wireless networking to work. > ipw2200: Detected geography ZZM (11 802.11bg channels, 0 802.11a channels) > Intel ICH Modem 0000:00:1f.6: PCI INT B -> Link[LNKB] -> GSI 10 (level, low) -> IRQ 10 > Intel ICH Modem 0000:00:1f.6: setting latency timer to 64 > Intel ICH 0000:00:1f.5: PCI INT B -> Link[LNKB] -> GSI 10 (level, low) -> IRQ 10 > Intel ICH 0000:00:1f.5: setting latency timer to 64 > pcmcia_socket pcmcia_socket0: cs: IO port probe 0x100-0x3af: excluding 0x230-0x237 > pcmcia_socket pcmcia_socket0: cs: IO port probe 0x3e0-0x4ff: clean. > pcmcia_socket pcmcia_socket0: cs: IO port probe 0x820-0x8ff: clean. > pcmcia_socket pcmcia_socket0: cs: IO port probe 0xc00-0xcf7: clean. > pcmcia_socket pcmcia_socket0: cs: IO port probe 0xa00-0xaff: clean. > intel8x0_measure_ac97_clock: measured 54490 usecs > intel8x0: clocking to 48000 > EXT3 FS on hda1, internal journal > nf_conntrack version 0.5.0 (8192 buckets, 32768 max) > warning: `dbus-daemon' uses deprecated v2 capabilities in a way that may be insecure. > ACPI: EC: non-query interrupt received, switching to interrupt mode > ACPI: EC: GPE storm detected, disabling EC GPE > [drm] Initialized drm 1.1.0 20060810 > pci 0000:01:00.0: PCI INT A -> Link[LNKA] -> GSI 10 (level, low) -> IRQ 10 > [drm] Initialized radeon 1.29.0 20080528 on minor 0 > agpgart-intel 0000:00:00.0: AGP 2.0 bridge > agpgart-intel 0000:00:00.0: putting AGP V2 device into 4x mode > pci 0000:01:00.0: putting AGP V2 device into 4x mode > [drm] Setting GART location based on new memory map > [drm] Loading R300 Microcode > [drm] Num pipes: 1 > [drm] writeback test succeeded in 1 usecs > evdev.c(EVIOCGBIT): Suspicious buffer size 511, limiting output to 64 bytes. See http://userweb.kernel.org/~dtor/eviocgbit-bug.html > [drm] Num pipes: 1