From: Yinghai Lu <yinghai@kernel.org>
To: Kamalesh Babulal <kamalesh@linux.vnet.ibm.com>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>,
linux-next@vger.kernel.org, LKML <linux-kernel@vger.kernel.org>,
mingo@elte.hu, mel@csn.ul.ie
Subject: Re: [BUG] next-20081216 - WARNING: at kernel/smp.c:333 smp_call_function_mask
Date: Fri, 19 Dec 2008 13:02:40 -0800 [thread overview]
Message-ID: <494C0BF0.3080109@kernel.org> (raw)
In-Reply-To: <20081219134636.GA11772@linux.vnet.ibm.com>
Kamalesh Babulal wrote:
> * Yinghai Lu <yinghai@kernel.org> [2008-12-19 03:51:53]:
>
>> On Fri, Dec 19, 2008 at 2:54 AM, Kamalesh Babulal
>> <kamalesh@linux.vnet.ibm.com> wrote:
>>> Hi,
>>>
>>> next-200816 kernel panics, while boot up on x86_64 machine.
>>>
>>> Initializing CPU#0
>>> BUG: unable to handle kernel NULL pointer dereference at 0000000000000048
>>> IP: [<ffffffff80700449>] init_ISA_irqs+0x18/0x53
>> .config and good boot log?
>>
>> YH
> Hi,
>
> I am able to reproduce with next-20081218 kernel also, attaching the
> bootlog and .config file of next-20081218 kernel
>
> root (hd0,0)
> Filesystem type is ext2fs, partition type 0x83
> kernel /vmlinuz-autotest root=/dev/mapper/VolGroup00-LogVol00 ro console=tty0 c
> onsole=ttyS1,19200 selinux=no debug nmi_watchdog=1 initcall_debug earlyprintk=s
> erial,ttyS1,19200 IDENT=1229689794
> [Linux-bzImage, setup=0x3000, size=0x274e50]
> initrd /initrd-autotest
> [Linux-initrd @ 0x37e5f000, 0x190980 bytes]
>
> Command line: root=/dev/mapper/VolGroup00-LogVol00 ro console=tty0 console=ttyS1,19200 selinux=no debug nmi_watchdog=1 initcall_debug earlyprintk=serial,ttyS1,19200 IDENT=1229689794
> KERNEL supported cpus:
> Intel GenuineIntel
> AMD AuthenticAMD
> Centaur CentaurHauls
> BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 000000000009d400 (usable)
> BIOS-e820: 000000000009d400 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 000000003ffcddc0 (usable)
> BIOS-e820: 000000003ffcddc0 - 000000003ffd0000 (ACPI data)
> BIOS-e820: 000000003ffd0000 - 0000000040000000 (reserved)
> BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
> DMI 2.3 present.
> last_pfn = 0x3ffcd max_arch_pfn = 0x3ffffffff
> init_memory_mapping: 0000000000000000-000000003ffcd000
> 0000000000 - 003fe00000 page 2M
> 003fe00000 - 003ffcd000 page 4k
> kernel direct mapping tables up to 3ffcd000 @ 8000-b000
> last_map_addr: 3ffcd000 end: 3ffcd000
> RAMDISK: 37e5f000 - 37fef980
> ACPI: RSDP 000FDFC0, 0014 (r0 IBM )
> ACPI: RSDT 3FFCFF80, 0034 (r1 IBM SERBLADE 1000 IBM 45444F43)
> ACPI: FACP 3FFCFEC0, 0084 (r2 IBM SERBLADE 1000 IBM 45444F43)
> ACPI: DSDT 3FFCDDC0, 1EA6 (r1 IBM SERBLADE 1000 INTL 2002025)
> ACPI: FACS 3FFCFCC0, 0040
> ACPI: APIC 3FFCFE00, 009C (r1 IBM SERBLADE 1000 IBM 45444F43)
> ACPI: SRAT 3FFCFD40, 0098 (r1 IBM SERBLADE 1000 IBM 45444F43)
> ACPI: HPET 3FFCFD00, 0038 (r1 IBM SERBLADE 1000 IBM 45444F43)
> ACPI: Local APIC address 0xfee00000
> SRAT: PXM 0 -> APIC 0 -> Node 0
> SRAT: PXM 0 -> APIC 1 -> Node 0
> SRAT: PXM 1 -> APIC 2 -> Node 1
> SRAT: PXM 1 -> APIC 3 -> Node 1
> SRAT: Node 0 PXM 0 0-40000000
> NUMA: Using 63 for the hash shift.
> Bootmem setup node 0 0000000000000000-000000003ffcd000
> NODE_DATA [0000000000009000 - 000000000000efff]
> bootmap [000000000000f000 - 0000000000016fff] pages 8
> (6 early reservations) ==> bootmem [0000000000 - 003ffcd000]
> #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
> #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000]
> #2 [0000200000 - 00008198b0] TEXT DATA BSS ==> [0000200000 - 00008198b0]
> #3 [0037e5f000 - 0037fef980] RAMDISK ==> [0037e5f000 - 0037fef980]
> #4 [000009d400 - 0000100000] BIOS reserved ==> [000009d400 - 0000100000]
> #5 [0000008000 - 0000009000] PGTABLE ==> [0000008000 - 0000009000]
> found SMP MP-table at [ffff88000009d540] 0009d540
> Zone PFN ranges:
> DMA 0x00000000 -> 0x00001000
> DMA32 0x00001000 -> 0x00100000
> Normal 0x00100000 -> 0x00100000
> Movable zone start PFN for each node
> early_node_map[2] active PFN ranges
> 0: 0x00000000 -> 0x0000009d
> 0: 0x00000100 -> 0x0003ffcd
> On node 0 totalpages: 261994
> DMA zone: 64 pages used for memmap
> DMA zone: 1665 pages reserved
> DMA zone: 2268 pages, LIFO batch:0
> DMA32 zone: 4032 pages used for memmap
> DMA32 zone: 253965 pages, LIFO batch:31
> Normal zone: 0 pages used for memmap
> Movable zone: 0 pages used for memmap
> Detected use of extended apic ids on hypertransport bus
> Detected use of extended apic ids on hypertransport bus
> ACPI: PM-Timer IO Port: 0x2208
> ACPI: Local APIC address 0xfee00000
> ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
> ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
> ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
> ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled)
> ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1])
> ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
> ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1])
> ACPI: LAPIC_NMI (acpi_id[0x03] dfl dfl lint[0x1])
> ACPI: IOAPIC (id[0x0e] address[0xfec00000] gsi_base[0])
> IOAPIC[0]: apic_id 14, version 0, address 0xfec00000, GSI 0-23
> ACPI: IOAPIC (id[0x0d] address[0xfec10000] gsi_base[24])
> IOAPIC[1]: apic_id 13, version 0, address 0xfec10000, GSI 24-27
> ACPI: IOAPIC (id[0x0c] address[0xfec20000] gsi_base[48])
> IOAPIC[2]: apic_id 12, version 0, address 0xfec20000, GSI 48-51
> ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
> ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 low level)
> ACPI: IRQ0 used by override.
> ACPI: IRQ2 used by override.
> ACPI: IRQ11 used by override.
> Using ACPI (MADT) for SMP configuration information
> ACPI: HPET id: 0x10228203 base: 0xfecff000
> SMP: Allowing 4 CPUs, 0 hotplug CPUs
> Allocating PCI resources starting at 50000000 (gap: 40000000:bec00000)
> PERCPU: Allocating 49152 bytes of per cpu data
> per cpu data for cpu0 on node0 at 000000000100e000
> per cpu data for cpu1 on node0 at 000000000101a000
> per cpu data for cpu2 on node0 at 0000000001026000
> per cpu data for cpu3 on node0 at 0000000001032000
> NR_CPUS: 255, nr_cpu_ids: 4, nr_node_ids 1
> Built 1 zonelists in Node order, mobility grouping on. Total pages: 256233
> Policy zone: DMA32
> Kernel command line: root=/dev/mapper/VolGroup00-LogVol00 ro console=tty0 console=ttyS1,19200 selinux=no debug nmi_watchdog=1 initcall_debug earlyprintk=serial,ttyS1,19200 IDENT=1229689794
> Initializing CPU#0
> BUG: unable to handle kernel NULL pointer dereference at 0000000000000048
> IP: [<ffffffff80714479>] init_ISA_irqs+0x18/0x53
> PGD 0
> Thread overran stack, or stack corrupted
> Oops: 0002 [#1] SMP
> last sysfs file:
> CPU 0
> Modules linked in:
> Pid: 0, comm: swapper Not tainted 2.6.28-rc8-next-20081218-autotest #1
> RIP: 0010:[<ffffffff80714479>] [<ffffffff80714479>] init_ISA_irqs+0x18/0x53
> RSP: 0018:ffffffff80705f88 EFLAGS: 00010093
> RAX: 0000000000000000 RBX: 0000000000000000 RCX: ffffffff80778a80
> RDX: 0000000000000100 RSI: 0000000000000092 RDI: 0000000000000000
> RBP: 0000000000000000 R08: ffff88008089e000 R09: 0000000000000000
> R10: ffff880001012c60 R11: ffffffff803560a0 R12: ffff88000103e040
> R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000
> FS: 0000000000000000(0000) GS:ffffffff806f73c0(0000) knlGS:0000000000000000
> CS: 0010 DS: 0018 ES: 0018 CR0: 000000008005003b
> CR2: 0000000000000048 CR3: 0000000000201000 CR4: 00000000000006a0
> DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
> DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
> Process swapper (pid: 0, threadinfo ffffffff80704000, task ffffffff806843a0)
> Stack:
> ffffffff8073b560 ffffffff807144bd ffffffff806e8f40 ffffffff8050e772
> ffffffff8073b560 ffffffff8070daf6 0000000000000000 0000000000093370
> 0000000000000000 ffffffff8070d394 80708e000010d136 00000000ffffffff
> Call Trace:
> [<ffffffff807144bd>] native_init_IRQ+0x9/0x931
> [<ffffffff8050e772>] register_cpu_notifier+0x1f/0x23
> [<ffffffff8070daf6>] start_kernel+0x1a8/0x319
> [<ffffffff8070d394>] x86_64_start_kernel+0xde/0xe2
> Code: 85 c0 75 0d 59 48 c7 c7 20 5f 68 80 e9 65 74 cb ff 5a c3 53 31 db e8 ba 85 00 00 31 ff e8 52 ad af ff 89 df e8 6a 12 b5 ff 89 df <c7> 40 48 00 02 00 00 48 c7 40 40 00 00 00 00 c7 40 4c 01 00 00
> RIP [<ffffffff80714479>] init_ISA_irqs+0x18/0x53
> RSP <ffffffff80705f88>
> CR2: 0000000000000048
can you check if tip works or not?
YH
next prev parent reply other threads:[~2008-12-19 21:03 UTC|newest]
Thread overview: 50+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-12-16 11:37 linux-next: Tree for December 16 Stephen Rothwell
2008-12-16 23:26 ` Andrew Morton
2008-12-17 6:59 ` linux-next: mtd tree build failures (Was: Re: linux-next: Tree for December 16) Stephen Rothwell
2008-12-17 9:32 ` Artem Bityutskiy
2008-12-17 9:57 ` Stephen Rothwell
2008-12-17 7:07 ` linux-next: Tree for December 16 Artem Bityutskiy
2008-12-17 7:08 ` next-20081216 - powerpc link error 'dynreloc miscount' Kamalesh Babulal
2008-12-17 7:28 ` Sam Ravnborg
2008-12-17 7:30 ` Stephen Rothwell
2008-12-19 10:54 ` [BUG] next-20081216 - WARNING: at kernel/smp.c:333 smp_call_function_mask Kamalesh Babulal
2008-12-19 11:51 ` Yinghai Lu
2008-12-19 13:46 ` Kamalesh Babulal
2008-12-19 21:02 ` Yinghai Lu [this message]
2008-12-23 13:21 ` Kamalesh Babulal
2008-12-23 21:09 ` Yinghai Lu
2008-12-24 16:34 ` Kamalesh Babulal
2008-12-24 20:34 ` Yinghai Lu
2008-12-26 9:12 ` Kamalesh Babulal
2008-12-26 10:05 ` Yinghai Lu
2008-12-26 10:27 ` Sam Ravnborg
2008-12-26 13:33 ` Ingo Molnar
2008-12-26 13:42 ` [PATCH] kbuild, sparseirq: work around GCC bug with __weak aliases Ingo Molnar
2008-12-27 4:09 ` Paul Mackerras
2008-12-27 10:59 ` Ingo Molnar
2008-12-28 23:27 ` Paul Mackerras
2008-12-26 15:28 ` [BUG] next-20081216 - WARNING: at kernel/smp.c:333 smp_call_function_mask Kamalesh Babulal
2008-12-26 15:33 ` Ingo Molnar
2008-12-26 17:04 ` Kamalesh Babulal
2008-12-26 18:17 ` Ingo Molnar
2008-12-27 7:11 ` Kamalesh Babulal
2008-12-27 7:14 ` Yinghai Lu
2008-12-27 7:39 ` Yinghai Lu
2008-12-27 8:37 ` Ingo Molnar
2008-12-27 8:39 ` Ingo Molnar
2008-12-27 11:21 ` Kamalesh Babulal
2008-12-27 11:24 ` Ingo Molnar
2008-12-27 11:57 ` Kamalesh Babulal
2008-12-27 12:26 ` Ingo Molnar
2008-12-27 15:29 ` Kamalesh Babulal
2008-12-27 21:10 ` Yinghai Lu
2008-12-28 12:55 ` Ingo Molnar
2008-12-28 16:11 ` Kamalesh Babulal
2008-12-28 23:09 ` Yinghai Lu
2008-12-27 5:05 ` [PATCH] perf_counter: more barrier in blank weak function Yinghai Lu
2008-12-27 5:06 ` [PATCH] kgdb: " Yinghai Lu
2008-12-27 8:17 ` Ingo Molnar
2008-12-27 8:34 ` Andrew Morton
2008-12-27 6:07 ` [PATCH] perf_counter: " KOSAKI Motohiro
2008-12-27 9:46 ` [BUG] next-20081216 - WARNING: at kernel/smp.c:333 smp_call_function_mask David Howells
2008-12-27 9:50 ` Ingo Molnar
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=494C0BF0.3080109@kernel.org \
--to=yinghai@kernel.org \
--cc=kamalesh@linux.vnet.ibm.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-next@vger.kernel.org \
--cc=mel@csn.ul.ie \
--cc=mingo@elte.hu \
--cc=sfr@canb.auug.org.au \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).