linux-next: Tree for July 23

linux-next: Tree for July 23

[Stephen Rothwell]

[-- Attachment #1: Type: text/plain, Size: 11823 bytes --]

Hi all,

Changes since 20100722:

New tree: xen

Dropped tree: xen (build problems)

Linus' tree lost its build failure.

The sound tree lost a conflict.

The kgdb tree gained a conflict against Linus' tree.

The catalin tree gained conflicts against the arm tree.

The xen tree gained build problems so I dropped it for today.

The workqueues tree gained conflicts against Linus' tree and the cifs tree.

The staging-next tree gained conflicts against the net tree.

----------------------------------------------------------------------------

I have created today's linux-next tree at
git://git.kernel.org/pub/scm/linux/kernel/git/next/linux-next.git
(patches at http://www.kernel.org/pub/linux/kernel/v2.6/next/ ).  If you
are tracking the linux-next tree using git, you should not use "git pull"
to do so as that will try to merge the new linux-next release with the
old one.  You should use "git fetch" as mentioned in the FAQ on the wiki
(see below).

You can see which trees have been included by looking in the Next/Trees
file in the source.  There are also quilt-import.log and merge.log files
in the Next directory.  Between each merge, the tree was built with
a ppc64_defconfig for powerpc and an allmodconfig for x86_64. After the
final fixups (if any), it is also built with powerpc allnoconfig (32 and
64 bit), ppc44x_defconfig and allyesconfig (minus
CONFIG_PROFILE_ALL_BRANCHES - this fails its final link) and i386, sparc
and sparc64 defconfig. These builds also have
CONFIG_ENABLE_WARN_DEPRECATED, CONFIG_ENABLE_MUST_CHECK and
CONFIG_DEBUG_INFO disabled when necessary.

Below is a summary of the state of the merge.

We are up to 167 trees (counting Linus' and 22 trees of patches pending
for Linus' tree), more are welcome (even if they are currently empty).
Thanks to those who have contributed, and to those who haven't, please do.

Status of my local build tests will be at
http://kisskb.ellerman.id.au/linux-next .  If maintainers want to give
advice about cross compilers/configs that work, we are always open to add
more builds.

Thanks to Jan Dittmer for adding the linux-next tree to his build tests
at http://l4x.org/k/ , the guys at http://test.kernel.org/ and Randy
Dunlap for doing many randconfig builds.

There is a wiki covering stuff to do with linux-next at
http://linux.f-seidel.de/linux-next/pmwiki/ .  Thanks to Frank Seidel.

-- 
Cheers,
Stephen Rothwell                    sfr@canb.auug.org.au

$ git checkout master
$ git reset --hard stable
Merging origin/master
Merging fixes/fixes
Merging arm-current/master
Merging m68k-current/for-linus
Merging powerpc-merge/merge
Merging sparc-current/master
Merging scsi-rc-fixes/master
Merging net-current/master
Merging sound-current/for-linus
Merging pci-current/for-linus
Merging wireless-current/master
Merging kbuild-current/rc-fixes
Merging quilt/driver-core.current
Merging quilt/tty.current
Merging quilt/usb.current
Merging quilt/staging.current
Merging cpufreq-current/fixes
Merging input-current/for-linus
Merging md-current/for-linus
Merging audit-current/for-linus
Merging crypto-current/master
Merging ide-curent/master
Merging dwmw2/master
Merging gcl-current/merge
Merging arm/devel
Merging davinci/davinci-next
Merging i.MX/for-next
Merging msm/for-next
Merging omap/for-next
CONFLICT (content): Merge conflict in arch/arm/mach-omap2/board-3430sdp.c
CONFLICT (content): Merge conflict in arch/arm/mach-omap2/board-3630sdp.c
CONFLICT (content): Merge conflict in arch/arm/mach-omap2/board-am3517evm.c
CONFLICT (content): Merge conflict in arch/arm/mach-omap2/board-cm-t35.c
CONFLICT (content): Merge conflict in arch/arm/mach-omap2/board-devkit8000.c
CONFLICT (content): Merge conflict in arch/arm/mach-omap2/board-igep0020.c
CONFLICT (content): Merge conflict in arch/arm/mach-omap2/board-ldp.c
CONFLICT (content): Merge conflict in arch/arm/mach-omap2/board-omap3beagle.c
CONFLICT (content): Merge conflict in arch/arm/mach-omap2/board-omap3evm.c
CONFLICT (content): Merge conflict in arch/arm/mach-omap2/board-omap3pandora.c
CONFLICT (content): Merge conflict in arch/arm/mach-omap2/board-omap3touchbook.c
CONFLICT (content): Merge conflict in arch/arm/mach-omap2/board-overo.c
CONFLICT (content): Merge conflict in arch/arm/mach-omap2/board-zoom2.c
CONFLICT (content): Merge conflict in arch/arm/mach-omap2/board-zoom3.c
Merging pxa/for-next
Merging samsung/next-samsung
Merging s5p/for-next
Merging tegra/for-next
CONFLICT (content): Merge conflict in arch/arm/Kconfig
Merging avr32/avr32-arch
Merging blackfin/for-linus
Merging cris/for-next
Merging ia64/test
Merging m68k/for-next
Merging m68knommu/for-next
Merging microblaze/next
CONFLICT (content): Merge conflict in arch/microblaze/mm/init.c
Merging mips/mips-for-linux-next
Merging parisc/next
Merging powerpc/next
Merging 4xx/next
Merging 52xx-and-virtex/next
CONFLICT (content): Merge conflict in drivers/serial/mpc52xx_uart.c
Merging galak/next
Merging s390/features
Merging sh/master
Merging genesis/master
CONFLICT (content): Merge conflict in arch/arm/configs/ap4evb_defconfig
CONFLICT (content): Merge conflict in arch/arm/configs/g3evm_defconfig
CONFLICT (content): Merge conflict in arch/arm/configs/g4evm_defconfig
Merging sparc/master
Merging tile/master
Merging xtensa/master
Merging ceph/for-next
Merging cifs/master
Merging configfs/linux-next
Merging ecryptfs/next
Merging ext3/for_next
Merging ext4/next
Merging fatfs/master
Merging fuse/for-next
Merging gfs2/master
Merging jfs/next
Merging logfs/master
CONFLICT (content): Merge conflict in fs/logfs/logfs.h
Merging nfs/linux-next
Merging nfsd/nfsd-next
Merging nilfs2/for-next
Merging ocfs2/linux-next
Merging omfs/for-next
Merging squashfs/master
Merging udf/for_next
Merging v9fs/for-next
Merging ubifs/linux-next
Merging xfs/master
Merging vfs/for-next
CONFLICT (content): Merge conflict in fs/nilfs2/super.c
CONFLICT (content): Merge conflict in fs/xfs/linux-2.6/xfs_super.c
Applying: v9fs: fixup for inode_setattr being removed
Applying: xfs: update tracing for clear_inode to evit_inode transition
Applying: cifs: fix for clear_inode -> evict_inode API change
Merging pci/linux-next
Merging hid/for-next
Merging quilt/i2c
Merging bjdooks-i2c/next-i2c
CONFLICT (content): Merge conflict in arch/arm/plat-omap/i2c.c
CONFLICT (content): Merge conflict in drivers/i2c/busses/i2c-cpm.c
CONFLICT (content): Merge conflict in drivers/i2c/busses/i2c-mpc.c
Merging quilt/jdelvare-hwmon
Merging quilt/kernel-doc
Merging v4l-dvb/master
Merging kbuild/for-next
Merging kconfig/for-next
Merging ide/master
Merging libata/NEXT
Merging infiniband/for-next
Merging acpi/test
Merging idle-test/idle-test
Merging ieee1394/for-next
Merging ubi/linux-next
Merging kvm/linux-next
Merging dlm/next
Merging ibft/master
Merging swiotlb/master
Merging scsi/master
Merging async_tx/next
Merging net/master
Merging wireless/master
CONFLICT (content): Merge conflict in drivers/net/wireless/iwlwifi/iwl-commands.h
Merging mtd/master
Merging crypto/master
Merging sound/for-next
CONFLICT (content): Merge conflict in Documentation/kernel-parameters.txt
Merging cpufreq/next
Merging quilt/rr
CONFLICT (content): Merge conflict in arch/um/drivers/hostaudio_kern.c
Merging input/next
CONFLICT (add/add): Merge conflict in arch/arm/plat-samsung/include/plat/keypad.h
Merging lsm/for-next
Merging block/for-next
CONFLICT (content): Merge conflict in drivers/block/virtio_blk.c
CONFLICT (content): Merge conflict in drivers/scsi/scsi_error.c
Merging quilt/device-mapper
CONFLICT (content): Merge conflict in drivers/md/dm.c
Applying: device-mapper: fix for bio API change
Merging embedded/master
Merging firmware/master
Merging pcmcia/master
Merging battery/master
Merging leds/for-mm
Merging backlight/for-mm
Merging kgdb/kgdb-next
CONFLICT (content): Merge conflict in kernel/debug/kdb/kdb_main.c
Applying: kgdb: partial revert of "kdb: Restore previous sysrq state"
Merging slab/for-next
Merging uclinux/for-next
Merging md/for-next
Merging mfd/for-next
Merging hdlc/hdlc-next
Merging drm/drm-next
Merging viafb/viafb-next
Merging voltage/for-next
Merging security-testing/next
Merging lblnet/master
Merging agp/agp-next
Merging uwb/for-upstream
Merging watchdog/master
Merging bdev/master
Merging dwmw2-iommu/master
Merging cputime/cputime
Merging osd/linux-next
Merging jc_docs/docs-next
Merging nommu/master
Merging trivial/for-next
Merging audit/for-next
Merging quilt/aoe
Merging suspend/linux-next
CONFLICT (content): Merge conflict in drivers/net/wireless/ipw2x00/ipw2100.c
Merging bluetooth/master
Merging fsnotify/for-next
CONFLICT (delete/modify): fs/notify/inotify/inotify.c deleted in fsnotify/for-next and modified in HEAD. Version HEAD of fs/notify/inotify/inotify.c left in tree.
$ git rm -f fs/notify/inotify/inotify.c
Applying: fsnotify: update gfp/slab.h includes
Merging irda/for-next
CONFLICT (content): Merge conflict in drivers/net/irda/irda-usb.c
Merging catalin/for-next
CONFLICT (content): Merge conflict in arch/arm/kernel/entry-armv.S
CONFLICT (content): Merge conflict in arch/arm/mm/mmu.c
Merging alacrity/linux-next
Merging i7core_edac/linux_next
CONFLICT (content): Merge conflict in MAINTAINERS
Merging devicetree/next-devicetree
CONFLICT (content): Merge conflict in arch/sparc/kernel/prom_64.c
Merging spi/next-spi
Merging limits/writable_limits
CONFLICT (content): Merge conflict in arch/x86/ia32/ia32entry.S
CONFLICT (content): Merge conflict in arch/x86/include/asm/unistd_32.h
CONFLICT (content): Merge conflict in arch/x86/include/asm/unistd_64.h
CONFLICT (content): Merge conflict in arch/x86/kernel/syscall_table_32.S
CONFLICT (content): Merge conflict in include/asm-generic/unistd.h
Merging omap_dss2/for-next
Merging xen/upstream/xen
$ git reset --hard HEAD^
Merging tip/auto-latest
CONFLICT (content): Merge conflict in Makefile
Merging edac-amd/for-next
Merging oprofile/for-next
Merging percpu/for-next
Merging workqueues/for-next
CONFLICT (content): Merge conflict in fs/cifs/cifsfs.c
CONFLICT (content): Merge conflict in fs/cifs/cifsglob.h
CONFLICT (content): Merge conflict in fs/cifs/file.c
CONFLICT (content): Merge conflict in include/linux/workqueue.h
CONFLICT (content): Merge conflict in kernel/trace/Kconfig
CONFLICT (content): Merge conflict in kernel/workqueue.c
Merging sfi/sfi-test
Merging asm-generic/next
Merging drivers-x86/linux-next
Merging hwpoison/hwpoison
CONFLICT (content): Merge conflict in mm/memory-failure.c
Merging sysctl/master
Merging bkl-core/bkl/core
Merging bkl-procfs/bkl/procfs
Merging bkl-ioctl/bkl/ioctl
Merging quilt/driver-core
Merging quilt/tty
CONFLICT (content): Merge conflict in include/linux/serial_core.h
Merging quilt/usb
CONFLICT (content): Merge conflict in drivers/media/video/uvc/uvcvideo.h
CONFLICT (content): Merge conflict in include/linux/usb/video.h
Merging staging-next/staging-next
CONFLICT (content): Merge conflict in drivers/staging/batman-adv/bat_sysfs.c
CONFLICT (delete/modify): drivers/staging/batman-adv/device.c deleted in staging-next/staging-next and modified in HEAD. Version HEAD of drivers/staging/batman-adv/device.c left in tree.
CONFLICT (content): Merge conflict in drivers/staging/batman-adv/hard-interface.c
CONFLICT (delete/modify): drivers/staging/cx25821/cx25821-audups11.c deleted in HEAD and modified in staging-next/staging-next. Version staging-next/staging-next of drivers/staging/cx25821/cx25821-audups11.c left in tree.
$ git rm -f drivers/staging/cx25821/cx25821-audups11.c
$ git rm -f drivers/staging/batman-adv/device.c
Merging slabh/slabh
Merging scsi-post-merge/master

[-- Attachment #2: Type: application/pgp-signature, Size: 490 bytes --]

Re: linux-next: Tree for July 23 (fscache)

[Randy Dunlap]

On Fri, 23 Jul 2010 16:49:31 +1000 Stephen Rothwell wrote:

> Hi all,
> 
> Changes since 20100722:


when CONFIG_SYSCTL is not enabled:

fs/fscache/main.c:189: error: 'fscache_sysctl_header' undeclared (first use in this function)


---
~Randy
*** Remember to use Documentation/SubmitChecklist when testing your code ***

Intel sound proke in today;s next

[Piotr Hosowicz]

Hello,

I just downloaded today's next and built it, then booted. Sound is not 
working, my card is:

00:1b.0 Audio device: Intel Corporation 82801JI (ICH10 Family) HD Audio 
Controller

I am now booted with latest git kernel and cannot provide more info 
here, I rebooted with that kernel because I am going to sleep and I like 
to listen to music by night. If more details is necessary I could boot 
that next tommorow, but tell me what you need.

Regards,

Piotr Hosowicz

-- 
- Jasiu, jakie jest najszybsze zwierze na swiecie?
- Gepard, pszepani.
- A najszybszy ptak?
- Ptak geparda.
NP:  -
NB: 2.6.35-rc6

Re: Intel sound proke in today;s next

[Piotr Hosowicz]

On 23.07.2010 20:24, Piotr Hosowicz wrote:
> Hello,
>
> I just downloaded today's next and built it, then booted. Sound is not
> working, my card is:
>
> 00:1b.0 Audio device: Intel Corporation 82801JI (ICH10 Family) HD Audio
> Controller
>
> I am now booted with latest git kernel and cannot provide more info
> here

RC6, sorry

-- 
Z cyklu "Uroki demokracji", czyli pytania i odpowiedzi w teledurniejach:
- W którym mieście europejskim powstała pierwsza opera?
- Sydney.
NP:  -
NB: 2.6.35-rc6

Re: Intel sound proke in today;s next

[Stephen Rothwell]

[-- Attachment #1: Type: text/plain, Size: 919 bytes --]

[Just cc'ing the sound tree contact]

On Fri, 23 Jul 2010 20:24:36 +0200 Piotr Hosowicz <piotr@hosowicz.com> wrote:
>
> Hello,
> 
> I just downloaded today's next and built it, then booted. Sound is not 
> working, my card is:
> 
> 00:1b.0 Audio device: Intel Corporation 82801JI (ICH10 Family) HD Audio 
> Controller
> 
> I am now booted with latest git kernel and cannot provide more info 
> here, I rebooted with that kernel because I am going to sleep and I like 
> to listen to music by night. If more details is necessary I could boot 
> that next tommorow, but tell me what you need.
> 
> Regards,
> 
> Piotr Hosowicz
> 
> -- 
> - Jasiu, jakie jest najszybsze zwierze na swiecie?
> - Gepard, pszepani.
> - A najszybszy ptak?
> - Ptak geparda.
> NP:  -
> NB: 2.6.35-rc6
> 


-- 
Cheers,
Stephen Rothwell                    sfr@canb.auug.org.au
http://www.canb.auug.org.au/~sfr/

[-- Attachment #2: Type: application/pgp-signature, Size: 490 bytes --]

Re: Intel sound proke in today;s next

[Takashi Iwai]

At Sat, 24 Jul 2010 11:59:00 +1000,
Stephen Rothwell wrote:
> 
> [Just cc'ing the sound tree contact]
> 
> On Fri, 23 Jul 2010 20:24:36 +0200 Piotr Hosowicz <piotr@hosowicz.com> wrote:
> >
> > Hello,
> > 
> > I just downloaded today's next and built it, then booted. Sound is not 
> > working, my card is:
> > 
> > 00:1b.0 Audio device: Intel Corporation 82801JI (ICH10 Family) HD Audio 
> > Controller
> > 
> > I am now booted with latest git kernel and cannot provide more info 
> > here, I rebooted with that kernel because I am going to sleep and I like 
> > to listen to music by night. If more details is necessary I could boot 
> > that next tommorow, but tell me what you need.

Make sure that your mixer setup is correct with a new kernel.
Usually alsactl restores the right mixer values, though.

At best, run alsa-info.sh (with --no-upload option) on both kernels to
compare.  Also you can try to pull only sound git tree instead of
linux-kernel to identify whether it's a problem in the sound tree or
somewhere else.  Anyway, see Documentation/sound/alsa/HD-Audio.txt for
some details.


thanks,

Takashi

Re: Intel sound proke in today;s next

[Piotr Hosowicz]

On 25.07.2010 17:27, Takashi Iwai wrote:
> At Sat, 24 Jul 2010 11:59:00 +1000,
> Stephen Rothwell wrote:
>>
>> [Just cc'ing the sound tree contact]
>>
>> On Fri, 23 Jul 2010 20:24:36 +0200 Piotr Hosowicz<piotr@hosowicz.com>  wrote:
>>>
>>> Hello,
>>>
>>> I just downloaded today's next and built it, then booted. Sound is not
>>> working, my card is:
>>>
>>> 00:1b.0 Audio device: Intel Corporation 82801JI (ICH10 Family) HD Audio
>>> Controller
>>>
>>> I am now booted with latest git kernel and cannot provide more info
>>> here, I rebooted with that kernel because I am going to sleep and I like
>>> to listen to music by night. If more details is necessary I could boot
>>> that next tommorow, but tell me what you need.
>
> Make sure that your mixer setup is correct with a new kernel.
> Usually alsactl restores the right mixer values, though.
>
> At best, run alsa-info.sh (with --no-upload option) on both kernels to
> compare.  Also you can try to pull only sound git tree instead of
> linux-kernel to identify whether it's a problem in the sound tree or
> somewhere else.  Anyway, see Documentation/sound/alsa/HD-Audio.txt for
> some details.

I do not see such script, alsa-info.sh. I dont know how to pull only the 
sound tree. Tommorrow morning I will check if there is a new main kernel 
version and build it. Should I expect that there will be a former 
problem again ? If so I will investigate it deeper.

Regards,

Piotr Hosowicz

-- 
Janusz Korwin-Mikke:
"Idiota z dyplomem to taki sam idiota,
jak przedtem - tylko z pretensjami."
NP: Patrick O'Hearn - Approaching Summit
NB: 2.6.35-rc6-git1

Re: Intel sound proke in today;s next

[Takashi Iwai]

At Sun, 25 Jul 2010 17:56:50 +0200,
Piotr Hosowicz wrote:
> 
> On 25.07.2010 17:27, Takashi Iwai wrote:
> > At Sat, 24 Jul 2010 11:59:00 +1000,
> > Stephen Rothwell wrote:
> >>
> >> [Just cc'ing the sound tree contact]
> >>
> >> On Fri, 23 Jul 2010 20:24:36 +0200 Piotr Hosowicz<piotr@hosowicz.com>  wrote:
> >>>
> >>> Hello,
> >>>
> >>> I just downloaded today's next and built it, then booted. Sound is not
> >>> working, my card is:
> >>>
> >>> 00:1b.0 Audio device: Intel Corporation 82801JI (ICH10 Family) HD Audio
> >>> Controller
> >>>
> >>> I am now booted with latest git kernel and cannot provide more info
> >>> here, I rebooted with that kernel because I am going to sleep and I like
> >>> to listen to music by night. If more details is necessary I could boot
> >>> that next tommorow, but tell me what you need.
> >
> > Make sure that your mixer setup is correct with a new kernel.
> > Usually alsactl restores the right mixer values, though.
> >
> > At best, run alsa-info.sh (with --no-upload option) on both kernels to
> > compare.  Also you can try to pull only sound git tree instead of
> > linux-kernel to identify whether it's a problem in the sound tree or
> > somewhere else.  Anyway, see Documentation/sound/alsa/HD-Audio.txt for
> > some details.
> 
> I do not see such script, alsa-info.sh.

The location of the script is found in the document mentioned above.

> I dont know how to pull only the 
> sound tree.

The sound git tree URL is found in the document mentioned above.
Just do git-pull onto your cloned Linus tree.

> Tommorrow morning I will check if there is a new main kernel 
> version and build it. Should I expect that there will be a former 
> problem again ? If so I will investigate it deeper.

Honestly, I don't know.  There is too little information to
analyze...


thanks,

Takashi

Re: Intel sound proke in today;s next

[Piotr Hosowicz]

On 26.07.2010 09:29, Takashi Iwai wrote:
> At Sun, 25 Jul 2010 17:56:50 +0200,
> Piotr Hosowicz wrote:
>>
>> On 25.07.2010 17:27, Takashi Iwai wrote:
>>> At Sat, 24 Jul 2010 11:59:00 +1000,
>>> Stephen Rothwell wrote:
>>>>
>>>> [Just cc'ing the sound tree contact]
>>>>
>>>> On Fri, 23 Jul 2010 20:24:36 +0200 Piotr Hosowicz<piotr@hosowicz.com>   wrote:
>>>>>
>>>>> Hello,
>>>>>
>>>>> I just downloaded today's next and built it, then booted. Sound is not
>>>>> working, my card is:
>>>>>
>>>>> 00:1b.0 Audio device: Intel Corporation 82801JI (ICH10 Family) HD Audio
>>>>> Controller
>>>>>
>>>>> I am now booted with latest git kernel and cannot provide more info
>>>>> here, I rebooted with that kernel because I am going to sleep and I like
>>>>> to listen to music by night. If more details is necessary I could boot
>>>>> that next tommorow, but tell me what you need.
>>>
>>> Make sure that your mixer setup is correct with a new kernel.
>>> Usually alsactl restores the right mixer values, though.
>>>
>>> At best, run alsa-info.sh (with --no-upload option) on both kernels to
>>> compare.  Also you can try to pull only sound git tree instead of
>>> linux-kernel to identify whether it's a problem in the sound tree or
>>> somewhere else.  Anyway, see Documentation/sound/alsa/HD-Audio.txt for
>>> some details.
>>
>> I do not see such script, alsa-info.sh.
>
> The location of the script is found in the document mentioned above.
>
>> I dont know how to pull only the
>> sound tree.
>
> The sound git tree URL is found in the document mentioned above.
> Just do git-pull onto your cloned Linus tree.

I don't knmow how to pull _onto_ existing files. git says that it is not 
a repo and refuses to download files, I thought that first I have to 
make git clone, but I was happy that it's not like that.

Regards,

Piotr Hosowicz

-- 
Fąfarowie wracają pieszo do domu z opery.
W pewnej chwili żona mówi do męża:
- Taki wstyd! Jak mogłeś krzyknąć: Brawo! Bis!,
gdy primadonna wpadła do kanału dla orkiestry?!
NP: Slash - Ghost (Feat. Ian Astbury)
NB: 2.6.35-rc6-git1

Re: Intel sound proke in today;s next

[Takashi Iwai]

At Mon, 26 Jul 2010 18:57:22 +0200,
Piotr Hosowicz wrote:
> 
> On 26.07.2010 09:29, Takashi Iwai wrote:
> > At Sun, 25 Jul 2010 17:56:50 +0200,
> > Piotr Hosowicz wrote:
> >>
> >> On 25.07.2010 17:27, Takashi Iwai wrote:
> >>> At Sat, 24 Jul 2010 11:59:00 +1000,
> >>> Stephen Rothwell wrote:
> >>>>
> >>>> [Just cc'ing the sound tree contact]
> >>>>
> >>>> On Fri, 23 Jul 2010 20:24:36 +0200 Piotr Hosowicz<piotr@hosowicz.com>   wrote:
> >>>>>
> >>>>> Hello,
> >>>>>
> >>>>> I just downloaded today's next and built it, then booted. Sound is not
> >>>>> working, my card is:
> >>>>>
> >>>>> 00:1b.0 Audio device: Intel Corporation 82801JI (ICH10 Family) HD Audio
> >>>>> Controller
> >>>>>
> >>>>> I am now booted with latest git kernel and cannot provide more info
> >>>>> here, I rebooted with that kernel because I am going to sleep and I like
> >>>>> to listen to music by night. If more details is necessary I could boot
> >>>>> that next tommorow, but tell me what you need.
> >>>
> >>> Make sure that your mixer setup is correct with a new kernel.
> >>> Usually alsactl restores the right mixer values, though.
> >>>
> >>> At best, run alsa-info.sh (with --no-upload option) on both kernels to
> >>> compare.  Also you can try to pull only sound git tree instead of
> >>> linux-kernel to identify whether it's a problem in the sound tree or
> >>> somewhere else.  Anyway, see Documentation/sound/alsa/HD-Audio.txt for
> >>> some details.
> >>
> >> I do not see such script, alsa-info.sh.
> >
> > The location of the script is found in the document mentioned above.
> >
> >> I dont know how to pull only the
> >> sound tree.
> >
> > The sound git tree URL is found in the document mentioned above.
> > Just do git-pull onto your cloned Linus tree.
> 
> I don't knmow how to pull _onto_ existing files. git says that it is not 
> a repo and refuses to download files, I thought that first I have to 
> make git clone, but I was happy that it's not like that.

First clone, then pull onto it,

  % git clone git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6.git
  % cd linux-2.6
  % git pull git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6.git

Anyway, if your codec is either IDT or STAC codec, try the latest sound
git or wait for tomorrow's linux-next tree.  A fix regarding the volume
was committed today.


Takashi

Re: Intel sound proke in today;s next

[Piotr Hosowicz]

On 26.07.2010 19:24, Takashi Iwai wrote:
> At Mon, 26 Jul 2010 18:57:22 +0200,
> Piotr Hosowicz wrote:
>>
>> On 26.07.2010 09:29, Takashi Iwai wrote:
>>> At Sun, 25 Jul 2010 17:56:50 +0200,
>>> Piotr Hosowicz wrote:
>>>>
>>>> On 25.07.2010 17:27, Takashi Iwai wrote:
>>>>> At Sat, 24 Jul 2010 11:59:00 +1000,
>>>>> Stephen Rothwell wrote:
>>>>>>
>>>>>> [Just cc'ing the sound tree contact]
>>>>>>
>>>>>> On Fri, 23 Jul 2010 20:24:36 +0200 Piotr Hosowicz<piotr@hosowicz.com>    wrote:
>>>>>>>
>>>>>>> Hello,
>>>>>>>
>>>>>>> I just downloaded today's next and built it, then booted. Sound is not
>>>>>>> working, my card is:
>>>>>>>
>>>>>>> 00:1b.0 Audio device: Intel Corporation 82801JI (ICH10 Family) HD Audio
>>>>>>> Controller
>>>>>>>
>>>>>>> I am now booted with latest git kernel and cannot provide more info
>>>>>>> here, I rebooted with that kernel because I am going to sleep and I like
>>>>>>> to listen to music by night. If more details is necessary I could boot
>>>>>>> that next tommorow, but tell me what you need.
>>>>>
>>>>> Make sure that your mixer setup is correct with a new kernel.
>>>>> Usually alsactl restores the right mixer values, though.
>>>>>
>>>>> At best, run alsa-info.sh (with --no-upload option) on both kernels to
>>>>> compare.  Also you can try to pull only sound git tree instead of
>>>>> linux-kernel to identify whether it's a problem in the sound tree or
>>>>> somewhere else.  Anyway, see Documentation/sound/alsa/HD-Audio.txt for
>>>>> some details.
>>>>
>>>> I do not see such script, alsa-info.sh.
>>>
>>> The location of the script is found in the document mentioned above.
>>>
>>>> I dont know how to pull only the
>>>> sound tree.
>>>
>>> The sound git tree URL is found in the document mentioned above.
>>> Just do git-pull onto your cloned Linus tree.
>>
>> I don't knmow how to pull _onto_ existing files. git says that it is not
>> a repo and refuses to download files, I thought that first I have to
>> make git clone, but I was happy that it's not like that.
>
> First clone, then pull onto it,
>
>    % git clone git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6.git
>    % cd linux-2.6
>    % git pull git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6.git

This is what I tried but the second git invocation failed saying that 
thre is no repo info in that directory.

> Anyway, if your codec is either IDT or STAC codec, try the latest sound
> git or wait for tomorrow's linux-next tree.  A fix regarding the volume
> was committed today.

I bet it is not a problem with volume, because it (fresh from linus 
repo) prints error messages when loading alsa sound during system start. 
Something that there is no sound device, as far as I remember.

Regards,

Piotr Hosowicz

-- 
Z cyklu "Uroki demokracji", czyli pytania i odpowiedzi w teledurniejach:
- Jaką walutę mają Indie?
- Ramadan.
NP: Peter Green Splinter Group - Say That You Want To
NB: 2.6.35-rc6-git1

Re: Intel sound proke in today;s next

[Takashi Iwai]

At Mon, 26 Jul 2010 19:33:37 +0200,
Piotr Hosowicz wrote:
> 
> On 26.07.2010 19:24, Takashi Iwai wrote:
> > At Mon, 26 Jul 2010 18:57:22 +0200,
> > Piotr Hosowicz wrote:
> >>
> >> On 26.07.2010 09:29, Takashi Iwai wrote:
> >>> At Sun, 25 Jul 2010 17:56:50 +0200,
> >>> Piotr Hosowicz wrote:
> >>>>
> >>>> On 25.07.2010 17:27, Takashi Iwai wrote:
> >>>>> At Sat, 24 Jul 2010 11:59:00 +1000,
> >>>>> Stephen Rothwell wrote:
> >>>>>>
> >>>>>> [Just cc'ing the sound tree contact]
> >>>>>>
> >>>>>> On Fri, 23 Jul 2010 20:24:36 +0200 Piotr Hosowicz<piotr@hosowicz.com>    wrote:
> >>>>>>>
> >>>>>>> Hello,
> >>>>>>>
> >>>>>>> I just downloaded today's next and built it, then booted. Sound is not
> >>>>>>> working, my card is:
> >>>>>>>
> >>>>>>> 00:1b.0 Audio device: Intel Corporation 82801JI (ICH10 Family) HD Audio
> >>>>>>> Controller
> >>>>>>>
> >>>>>>> I am now booted with latest git kernel and cannot provide more info
> >>>>>>> here, I rebooted with that kernel because I am going to sleep and I like
> >>>>>>> to listen to music by night. If more details is necessary I could boot
> >>>>>>> that next tommorow, but tell me what you need.
> >>>>>
> >>>>> Make sure that your mixer setup is correct with a new kernel.
> >>>>> Usually alsactl restores the right mixer values, though.
> >>>>>
> >>>>> At best, run alsa-info.sh (with --no-upload option) on both kernels to
> >>>>> compare.  Also you can try to pull only sound git tree instead of
> >>>>> linux-kernel to identify whether it's a problem in the sound tree or
> >>>>> somewhere else.  Anyway, see Documentation/sound/alsa/HD-Audio.txt for
> >>>>> some details.
> >>>>
> >>>> I do not see such script, alsa-info.sh.
> >>>
> >>> The location of the script is found in the document mentioned above.
> >>>
> >>>> I dont know how to pull only the
> >>>> sound tree.
> >>>
> >>> The sound git tree URL is found in the document mentioned above.
> >>> Just do git-pull onto your cloned Linus tree.
> >>
> >> I don't knmow how to pull _onto_ existing files. git says that it is not
> >> a repo and refuses to download files, I thought that first I have to
> >> make git clone, but I was happy that it's not like that.
> >
> > First clone, then pull onto it,
> >
> >    % git clone git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6.git
> >    % cd linux-2.6
> >    % git pull git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6.git
> 
> This is what I tried but the second git invocation failed saying that 
> thre is no repo info in that directory.

You need to pass the branch.  In this case, pass for-next

 % git pull git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6.git for-next

> > Anyway, if your codec is either IDT or STAC codec, try the latest sound
> > git or wait for tomorrow's linux-next tree.  A fix regarding the volume
> > was committed today.
> 
> I bet it is not a problem with volume, because it (fresh from linus 
> repo) prints error messages when loading alsa sound during system start. 
> Something that there is no sound device, as far as I remember.

With which kernel did it work at all...?


Takashi

Re: Intel sound proke in today;s next

[Piotr Hosowicz]

[-- Attachment #1: Type: text/plain, Size: 3652 bytes --]

On 26.07.2010 20:00, Takashi Iwai wrote:
> At Mon, 26 Jul 2010 19:33:37 +0200,
> Piotr Hosowicz wrote:
>>
>> On 26.07.2010 19:24, Takashi Iwai wrote:
>>> At Mon, 26 Jul 2010 18:57:22 +0200,
>>> Piotr Hosowicz wrote:
>>>>
>>>> On 26.07.2010 09:29, Takashi Iwai wrote:
>>>>> At Sun, 25 Jul 2010 17:56:50 +0200,
>>>>> Piotr Hosowicz wrote:
>>>>>>
>>>>>> On 25.07.2010 17:27, Takashi Iwai wrote:
>>>>>>> At Sat, 24 Jul 2010 11:59:00 +1000,
>>>>>>> Stephen Rothwell wrote:
>>>>>>>>
>>>>>>>> [Just cc'ing the sound tree contact]
>>>>>>>>
>>>>>>>> On Fri, 23 Jul 2010 20:24:36 +0200 Piotr Hosowicz<piotr@hosowicz.com>     wrote:
>>>>>>>>>
>>>>>>>>> Hello,
>>>>>>>>>
>>>>>>>>> I just downloaded today's next and built it, then booted. Sound is not
>>>>>>>>> working, my card is:
>>>>>>>>>
>>>>>>>>> 00:1b.0 Audio device: Intel Corporation 82801JI (ICH10 Family) HD Audio
>>>>>>>>> Controller
>>>>>>>>>
>>>>>>>>> I am now booted with latest git kernel and cannot provide more info
>>>>>>>>> here, I rebooted with that kernel because I am going to sleep and I like
>>>>>>>>> to listen to music by night. If more details is necessary I could boot
>>>>>>>>> that next tommorow, but tell me what you need.
>>>>>>>
>>>>>>> Make sure that your mixer setup is correct with a new kernel.
>>>>>>> Usually alsactl restores the right mixer values, though.
>>>>>>>
>>>>>>> At best, run alsa-info.sh (with --no-upload option) on both kernels to
>>>>>>> compare.  Also you can try to pull only sound git tree instead of
>>>>>>> linux-kernel to identify whether it's a problem in the sound tree or
>>>>>>> somewhere else.  Anyway, see Documentation/sound/alsa/HD-Audio.txt for
>>>>>>> some details.
>>>>>>
>>>>>> I do not see such script, alsa-info.sh.
>>>>>
>>>>> The location of the script is found in the document mentioned above.
>>>>>
>>>>>> I dont know how to pull only the
>>>>>> sound tree.
>>>>>
>>>>> The sound git tree URL is found in the document mentioned above.
>>>>> Just do git-pull onto your cloned Linus tree.
>>>>
>>>> I don't knmow how to pull _onto_ existing files. git says that it is not
>>>> a repo and refuses to download files, I thought that first I have to
>>>> make git clone, but I was happy that it's not like that.
>>>
>>> First clone, then pull onto it,
>>>
>>>     % git clone git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6.git
>>>     % cd linux-2.6
>>>     % git pull git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6.git
>>
>> This is what I tried but the second git invocation failed saying that
>> thre is no repo info in that directory.
>
> You need to pass the branch.  In this case, pass for-next

I passed topic/hda and rebuilt the kernel and now everything is working.

>   % git pull git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6.git for-next
>
>>> Anyway, if your codec is either IDT or STAC codec, try the latest sound
>>> git or wait for tomorrow's linux-next tree.  A fix regarding the volume
>>> was committed today.
>>
>> I bet it is not a problem with volume, because it (fresh from linus
>> repo) prints error messages when loading alsa sound during system start.
>> Something that there is no sound device, as far as I remember.
>
> With which kernel did it work at all...?

Please see attached output from working sound from alsa-info.sh. The 
version is in the filename.

How shall I know tommorrow when there is a new kernel version that I 
need to do the git magic again?

Regards and thanks,

Piotr Hosowicz

-- 
Nie pytaj co rząd może zrobić dla ciebie. Pytaj, jak możesz temu zapobiec.
NP: Peter Green Splinter Group - Tribal Dance
NB: 2.6.35-rc6-20100726-1827-sndfix+

[-- Attachment #2: alsa-info.txt.2.6.35-rc6-git1 --]
[-- Type: text/plain, Size: 43079 bytes --]

upload=true&script=true&cardinfo=
!!################################
!!ALSA Information Script v 0.4.59
!!################################

!!Script ran on: Mon Jul 26 18:10:49 UTC 2010


!!Linux Distribution
!!------------------

Debian GNU/Linux squeeze/sid \n \l


!!DMI Information
!!---------------

Manufacturer:      Gigabyte Technology Co., Ltd.
Product Name:      EP45-UD3


!!Kernel Information
!!------------------

Kernel release:    2.6.35-rc6-git1
Operating System:  GNU/Linux
Architecture:      x86_64
Processor:         unknown
SMP Enabled:       Yes


!!ALSA Version
!!------------

Driver version:     1.0.23
Library version:    1.0.23
Utilities version:  1.0.23


!!Loaded ALSA modules
!!-------------------

snd_hda_intel


!!Sound Servers on this system
!!----------------------------

aRts:
      Installed - Yes (/usr/bin/artsd)
      Running - No


!!Soundcards recognised by ALSA
!!-----------------------------

 0 [Intel          ]: HDA-Intel - HDA Intel
                      HDA Intel at 0xeb200000 irq 45


!!PCI Soundcards installed in the system
!!--------------------------------------

00:1b.0 Audio device: Intel Corporation 82801JI (ICH10 Family) HD Audio Controller


!!Advanced information - PCI Vendor/Device/Susbsystem ID's
!!--------------------------------------------------------

00:1b.0 0403: 8086:3a3e
	Subsystem: 1458:a002


!!Modprobe options (Sound related)
!!--------------------------------

snd-atiixp-modem: index=-2
snd-intel8x0m: index=-2
snd-via82xx-modem: index=-2
snd-pcsp: index=-2
snd-usb-audio: index=-2


!!Loaded sound module options
!!--------------------------

!!Module: snd_hda_intel
	bdl_pos_adj : 1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1
	beep_mode : 1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1
	enable : Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y
	enable_msi : -1
	id : (null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null)
	index : -1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1
	model : (null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null)
	position_fix : 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0
	power_save : 0
	power_save_controller : Y
	probe_mask : -1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1
	probe_only : 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0
	single_cmd : N


!!HDA-Intel Codec information
!!---------------------------
--startcollapse--

Codec: Realtek ALC889A
Address: 2
Function Id: 0x1
Vendor Id: 0x10ec0885
Subsystem Id: 0x1458a102
Revision Id: 0x100101
No Modem Function Group found
Default PCM:
    rates [0x560]: 44100 48000 96000 192000
    bits [0xe]: 16 20 24
    formats [0x1]: PCM
Default Amp-In caps: N/A
Default Amp-Out caps: N/A
GPIO: io=2, o=0, i=0, unsolicited=1, wake=0
  IO[0]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0
  IO[1]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0
Node 0x02 [Audio Output] wcaps 0x11: Stereo
  Device: name="ALC889A Analog", type="Audio", device=0
  Converter: stream=5, channel=0
  PCM:
    rates [0x560]: 44100 48000 96000 192000
    bits [0xe]: 16 20 24
    formats [0x1]: PCM
Node 0x03 [Audio Output] wcaps 0x11: Stereo
  Converter: stream=5, channel=0
  PCM:
    rates [0x560]: 44100 48000 96000 192000
    bits [0xe]: 16 20 24
    formats [0x1]: PCM
Node 0x04 [Audio Output] wcaps 0x11: Stereo
  Converter: stream=5, channel=0
  PCM:
    rates [0x560]: 44100 48000 96000 192000
    bits [0xe]: 16 20 24
    formats [0x1]: PCM
Node 0x05 [Audio Output] wcaps 0x11: Stereo
  Converter: stream=5, channel=0
  PCM:
    rates [0x560]: 44100 48000 96000 192000
    bits [0xe]: 16 20 24
    formats [0x1]: PCM
Node 0x06 [Audio Output] wcaps 0x211: Stereo Digital
  Control: name="IEC958 Playback Con Mask", index=0, device=0
  Control: name="IEC958 Playback Pro Mask", index=0, device=0
  Control: name="IEC958 Playback Default", index=0, device=0
  Control: name="IEC958 Playback Switch", index=0, device=0
  Control: name="IEC958 Default PCM Playback Switch", index=0, device=0
  Device: name="ALC889A Digital", type="SPDIF", device=1
  Converter: stream=5, channel=0
  Digital: Enabled
  Digital category: 0x0
  PCM:
    rates [0x5e0]: 44100 48000 88200 96000 192000
    bits [0x1e]: 16 20 24 32
    formats [0x1]: PCM
Node 0x07 [Audio Input] wcaps 0x10011b: Stereo Amp-In
  Control: name="Capture Switch", index=0, device=0
  Control: name="Capture Volume", index=0, device=0
  Device: name="ALC889A Analog", type="Audio", device=0
  Amp-In caps: ofs=0x10, nsteps=0x2e, stepsize=0x03, mute=1
  Amp-In vals:  [0x80 0x80]
  Converter: stream=0, channel=0
  SDI-Select: 0
  PCM:
    rates [0x560]: 44100 48000 96000 192000
    bits [0xe]: 16 20 24
    formats [0x1]: PCM
  Connection: 1
     0x24
Node 0x08 [Audio Input] wcaps 0x10011b: Stereo Amp-In
  Control: name="Capture Switch", index=1, device=0
  Control: name="Capture Volume", index=1, device=0
  Device: name="ALC889A Analog", type="Audio", device=2
  Amp-In caps: ofs=0x10, nsteps=0x2e, stepsize=0x03, mute=1
  Amp-In vals:  [0x80 0x80]
  Converter: stream=0, channel=0
  SDI-Select: 0
  PCM:
    rates [0x560]: 44100 48000 96000 192000
    bits [0xe]: 16 20 24
    formats [0x1]: PCM
  Connection: 1
     0x23
Node 0x09 [Audio Input] wcaps 0x10011b: Stereo Amp-In
  Control: name="Capture Switch", index=2, device=0
  Control: name="Capture Volume", index=2, device=0
  Amp-In caps: ofs=0x10, nsteps=0x2e, stepsize=0x03, mute=1
  Amp-In vals:  [0x80 0x80]
  Converter: stream=0, channel=0
  SDI-Select: 0
  PCM:
    rates [0x560]: 44100 48000 96000 192000
    bits [0xe]: 16 20 24
    formats [0x1]: PCM
  Connection: 1
     0x22
Node 0x0a [Audio Input] wcaps 0x100391: Stereo Digital
  Control: name="IEC958 Capture Switch", index=0, device=0
  Control: name="IEC958 Capture Default", index=0, device=0
  Device: name="ALC889A Digital", type="SPDIF", device=1
  Converter: stream=0, channel=0
  SDI-Select: 0
  Digital:
  Digital category: 0x0
  PCM:
    rates [0x560]: 44100 48000 96000 192000
    bits [0x1e]: 16 20 24 32
    formats [0x1]: PCM
  Unsolicited: tag=00, enabled=0
  Connection: 1
     0x1f
Node 0x0b [Audio Mixer] wcaps 0x20010b: Stereo Amp-In
  Control: name="CD Playback Volume", index=0, device=0
    ControlAmp: chs=3, dir=In, idx=4, ofs=0
  Control: name="CD Playback Switch", index=0, device=0
    ControlAmp: chs=3, dir=In, idx=4, ofs=0
  Control: name="Line Playback Volume", index=0, device=0
    ControlAmp: chs=3, dir=In, idx=2, ofs=0
  Control: name="Line Playback Switch", index=0, device=0
    ControlAmp: chs=3, dir=In, idx=2, ofs=0
  Control: name="Mic Playback Volume", index=0, device=0
    ControlAmp: chs=3, dir=In, idx=0, ofs=0
  Control: name="Mic Playback Switch", index=0, device=0
    ControlAmp: chs=3, dir=In, idx=0, ofs=0
  Control: name="Front Mic Playback Volume", index=0, device=0
    ControlAmp: chs=3, dir=In, idx=1, ofs=0
  Control: name="Front Mic Playback Switch", index=0, device=0
    ControlAmp: chs=3, dir=In, idx=1, ofs=0
  Amp-In caps: ofs=0x17, nsteps=0x1f, stepsize=0x05, mute=1
  Amp-In vals:  [0x80 0x80] [0x80 0x80] [0x17 0x17] [0x97 0x97] [0x17 0x17] [0x97 0x97] [0x97 0x97] [0x97 0x97] [0x97 0x97] [0x97 0x97]
  Connection: 10
     0x18 0x19 0x1a 0x1b 0x1c 0x1d 0x14 0x15 0x16 0x17
Node 0x0c [Audio Mixer] wcaps 0x20010f: Stereo Amp-In Amp-Out
  Control: name="Front Playback Volume", index=0, device=0
    ControlAmp: chs=3, dir=Out, idx=0, ofs=0
  Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
  Amp-In vals:  [0x00 0x00] [0x00 0x00]
  Amp-Out caps: ofs=0x40, nsteps=0x40, stepsize=0x03, mute=0
  Amp-Out vals:  [0x31 0x31]
  Connection: 2
     0x02 0x0b
Node 0x0d [Audio Mixer] wcaps 0x20010f: Stereo Amp-In Amp-Out
  Control: name="Surround Playback Volume", index=0, device=0
    ControlAmp: chs=3, dir=Out, idx=0, ofs=0
  Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
  Amp-In vals:  [0x80 0x80] [0x80 0x80]
  Amp-Out caps: ofs=0x40, nsteps=0x40, stepsize=0x03, mute=0
  Amp-Out vals:  [0x00 0x00]
  Connection: 2
     0x03 0x0b
Node 0x0e [Audio Mixer] wcaps 0x20010f: Stereo Amp-In Amp-Out
  Control: name="Center Playback Volume", index=0, device=0
    ControlAmp: chs=1, dir=Out, idx=0, ofs=0
  Control: name="LFE Playback Volume", index=0, device=0
    ControlAmp: chs=2, dir=Out, idx=0, ofs=0
  Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
  Amp-In vals:  [0x80 0x80] [0x80 0x80]
  Amp-Out caps: ofs=0x40, nsteps=0x40, stepsize=0x03, mute=0
  Amp-Out vals:  [0x00 0x00]
  Connection: 2
     0x04 0x0b
Node 0x0f [Audio Mixer] wcaps 0x20010f: Stereo Amp-In Amp-Out
  Control: name="Side Playback Volume", index=0, device=0
    ControlAmp: chs=3, dir=Out, idx=0, ofs=0
  Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
  Amp-In vals:  [0x80 0x80] [0x80 0x80]
  Amp-Out caps: ofs=0x40, nsteps=0x40, stepsize=0x03, mute=0
  Amp-Out vals:  [0x00 0x00]
  Connection: 2
     0x05 0x0b
Node 0x10 [Vendor Defined Widget] wcaps 0xf00000: Mono
Node 0x11 [Vendor Defined Widget] wcaps 0xf00000: Mono
Node 0x12 [Vendor Defined Widget] wcaps 0xf00000: Mono
Node 0x13 [Vendor Defined Widget] wcaps 0xf00000: Mono
Node 0x14 [Pin Complex] wcaps 0x40018f: Stereo Amp-In Amp-Out
  Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0
  Amp-In vals:  [0x00 0x00]
  Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
  Amp-Out vals:  [0x00 0x00]
  Pincap 0x0000373c: IN OUT HP Detect
    Vref caps: HIZ 50 GRD 80 100
  Pin Default 0x01014410: [Jack] Line Out at Ext Rear
    Conn = 1/8, Color = Green
    DefAssociation = 0x1, Sequence = 0x0
  Pin-ctls: 0x40: OUT VREF_HIZ
  Unsolicited: tag=00, enabled=0
  Connection: 5
     0x0c* 0x0d 0x0e 0x0f 0x26
Node 0x15 [Pin Complex] wcaps 0x40018f: Stereo Amp-In Amp-Out
  Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0
  Amp-In vals:  [0x00 0x00]
  Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
  Amp-Out vals:  [0x00 0x00]
  Pincap 0x0000373c: IN OUT HP Detect
    Vref caps: HIZ 50 GRD 80 100
  Pin Default 0x01011412: [Jack] Line Out at Ext Rear
    Conn = 1/8, Color = Black
    DefAssociation = 0x1, Sequence = 0x2
  Pin-ctls: 0x40: OUT VREF_HIZ
  Unsolicited: tag=00, enabled=0
  Connection: 5
     0x0c 0x0d* 0x0e 0x0f 0x26
Node 0x16 [Pin Complex] wcaps 0x40018f: Stereo Amp-In Amp-Out
  Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0
  Amp-In vals:  [0x00 0x00]
  Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
  Amp-Out vals:  [0x00 0x00]
  Pincap 0x0000003c: IN OUT HP Detect
  Pin Default 0x01016411: [Jack] Line Out at Ext Rear
    Conn = 1/8, Color = Orange
    DefAssociation = 0x1, Sequence = 0x1
  Pin-ctls: 0x40: OUT
  Unsolicited: tag=00, enabled=0
  Connection: 5
     0x0c 0x0d 0x0e* 0x0f 0x26
Node 0x17 [Pin Complex] wcaps 0x40018f: Stereo Amp-In Amp-Out
  Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0
  Amp-In vals:  [0x00 0x00]
  Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
  Amp-Out vals:  [0x00 0x00]
  Pincap 0x0000003c: IN OUT HP Detect
  Pin Default 0x01012414: [Jack] Line Out at Ext Rear
    Conn = 1/8, Color = Grey
    DefAssociation = 0x1, Sequence = 0x4
  Pin-ctls: 0x40: OUT
  Unsolicited: tag=00, enabled=0
  Connection: 5
     0x0c 0x0d 0x0e 0x0f* 0x26
Node 0x18 [Pin Complex] wcaps 0x40018f: Stereo Amp-In Amp-Out
  Control: name="Mic Boost", index=0, device=0
    ControlAmp: chs=3, dir=In, idx=0, ofs=0
  Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0
  Amp-In vals:  [0x00 0x00]
  Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
  Amp-Out vals:  [0x80 0x80]
  Pincap 0x0000373c: IN OUT HP Detect
    Vref caps: HIZ 50 GRD 80 100
  Pin Default 0x01a19c40: [Jack] Mic at Ext Rear
    Conn = 1/8, Color = Pink
    DefAssociation = 0x4, Sequence = 0x0
  Pin-ctls: 0x24: IN VREF_80
  Unsolicited: tag=00, enabled=0
  Connection: 5
     0x0c* 0x0d 0x0e 0x0f 0x26
Node 0x19 [Pin Complex] wcaps 0x40018f: Stereo Amp-In Amp-Out
  Control: name="Front Mic Boost", index=0, device=0
    ControlAmp: chs=3, dir=In, idx=0, ofs=0
  Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0
  Amp-In vals:  [0x00 0x00]
  Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
  Amp-Out vals:  [0x80 0x80]
  Pincap 0x0000373c: IN OUT HP Detect
    Vref caps: HIZ 50 GRD 80 100
  Pin Default 0x02a19c50: [Jack] Mic at Ext Front
    Conn = 1/8, Color = Pink
    DefAssociation = 0x5, Sequence = 0x0
  Pin-ctls: 0x24: IN VREF_80
  Unsolicited: tag=00, enabled=0
  Connection: 5
     0x0c* 0x0d 0x0e 0x0f 0x26
Node 0x1a [Pin Complex] wcaps 0x40018f: Stereo Amp-In Amp-Out
  Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0
  Amp-In vals:  [0x00 0x00]
  Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
  Amp-Out vals:  [0x80 0x80]
  Pincap 0x0000373c: IN OUT HP Detect
    Vref caps: HIZ 50 GRD 80 100
  Pin Default 0x0181344f: [Jack] Line In at Ext Rear
    Conn = 1/8, Color = Blue
    DefAssociation = 0x4, Sequence = 0xf
  Pin-ctls: 0x20: IN VREF_HIZ
  Unsolicited: tag=00, enabled=0
  Connection: 5
     0x0c* 0x0d 0x0e 0x0f 0x26
Node 0x1b [Pin Complex] wcaps 0x40018f: Stereo Amp-In Amp-Out
  Control: name="Headphone Playback Switch", index=0, device=0
    ControlAmp: chs=3, dir=Out, idx=0, ofs=0
  Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0
  Amp-In vals:  [0x00 0x00]
  Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
  Amp-Out vals:  [0x80 0x80]
  Pincap 0x0000373c: IN OUT HP Detect
    Vref caps: HIZ 50 GRD 80 100
  Pin Default 0x02214c20: [Jack] HP Out at Ext Front
    Conn = 1/8, Color = Green
    DefAssociation = 0x2, Sequence = 0x0
  Pin-ctls: 0xc0: OUT HP VREF_HIZ
  Unsolicited: tag=00, enabled=0
  Connection: 5
     0x0c* 0x0d 0x0e 0x0f 0x26
Node 0x1c [Pin Complex] wcaps 0x400001: Stereo
  Pincap 0x00000020: IN
  Pin Default 0x593301f0: [N/A] CD at Int ATAPI
    Conn = ATAPI, Color = Unknown
    DefAssociation = 0xf, Sequence = 0x0
    Misc = NO_PRESENCE
  Pin-ctls: 0x20: IN
Node 0x1d [Pin Complex] wcaps 0x400000: Mono
  Pincap 0x00000020: IN
  Pin Default 0x4005e601: [N/A] Line Out at Ext N/A
    Conn = Optical, Color = White
    DefAssociation = 0x0, Sequence = 0x1
  Pin-ctls: 0x20: IN
Node 0x1e [Pin Complex] wcaps 0x400300: Mono Digital
  Pincap 0x00000010: OUT
  Pin Default 0x014b6130: [Jack] SPDIF Out at Ext Rear
    Conn = Comb, Color = Orange
    DefAssociation = 0x3, Sequence = 0x0
    Misc = NO_PRESENCE
  Pin-ctls: 0x40: OUT
  Connection: 1
     0x06
Node 0x1f [Pin Complex] wcaps 0x400200: Mono Digital
  Pincap 0x00000020: IN
  Pin Default 0x01cb7160: [Jack] SPDIF In at Ext Rear
    Conn = Comb, Color = Yellow
    DefAssociation = 0x6, Sequence = 0x0
    Misc = NO_PRESENCE
  Pin-ctls: 0x20: IN
Node 0x20 [Vendor Defined Widget] wcaps 0xf00040: Mono
  Processing caps: benign=0, ncoeff=17
Node 0x21 [Volume Knob Widget] wcaps 0x600080: Mono
  Volume-Knob: delta=0, steps=32, direct=0, val=0
  Unsolicited: tag=00, enabled=0
  Connection: 0
Node 0x22 [Audio Mixer] wcaps 0x20010b: Stereo Amp-In
  Control: name="Input Source", index=2, device=0
  Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
  Amp-In vals:  [0x00 0x00] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80]
  Connection: 11
     0x18 0x19 0x1a 0x1b 0x1c 0x1d 0x14 0x15 0x16 0x17 0x0b
Node 0x23 [Audio Mixer] wcaps 0x20010b: Stereo Amp-In
  Control: name="Input Source", index=1, device=0
  Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
  Amp-In vals:  [0x00 0x00] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80]
  Connection: 11
     0x18 0x19 0x1a 0x1b 0x1c 0x1d 0x14 0x15 0x16 0x17 0x0b
Node 0x24 [Audio Mixer] wcaps 0x20010b: Stereo Amp-In
  Control: name="Input Source", index=0, device=0
  Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
  Amp-In vals:  [0x00 0x00] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80]
  Connection: 11
     0x18 0x19 0x1a 0x1b 0x1c 0x1d 0x14 0x15 0x16 0x17 0x0b
Node 0x25 [Audio Output] wcaps 0x11: Stereo
  Converter: stream=0, channel=0
  PCM:
    rates [0x560]: 44100 48000 96000 192000
    bits [0xe]: 16 20 24
    formats [0x1]: PCM
Node 0x26 [Audio Mixer] wcaps 0x20010f: Stereo Amp-In Amp-Out
  Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
  Amp-In vals:  [0x00 0x00] [0x80 0x80]
  Amp-Out caps: ofs=0x40, nsteps=0x40, stepsize=0x03, mute=0
  Amp-Out vals:  [0x40 0x40]
  Connection: 2
     0x25 0x0b
--endcollapse--


!!ALSA Device nodes
!!-----------------

crw-rw----+ 1 root audio 116, 9 Jul 26 19:20 /dev/snd/controlC0
crw-rw----+ 1 root audio 116, 8 Jul 26 19:20 /dev/snd/pcmC0D0c
crw-rw----+ 1 root audio 116, 7 Jul 26 20:02 /dev/snd/pcmC0D0p
crw-rw----+ 1 root audio 116, 6 Jul 26 19:20 /dev/snd/pcmC0D1c
crw-rw----+ 1 root audio 116, 5 Jul 26 19:20 /dev/snd/pcmC0D1p
crw-rw----+ 1 root audio 116, 4 Jul 26 19:20 /dev/snd/pcmC0D2c
crw-rw----+ 1 root audio 116, 3 Jul 26 19:20 /dev/snd/seq
crw-rw----+ 1 root audio 116, 2 Jul 26 19:20 /dev/snd/timer

/dev/snd/by-path:
total 0
drwxr-xr-x 2 root root  60 Jul 26 19:20 .
drwxr-xr-x 3 root root 220 Jul 26 19:20 ..
lrwxrwxrwx 1 root root  12 Jul 26 19:20 pci-0000:00:1b.0 -> ../controlC0


!!Aplay/Arecord output
!!------------

APLAY

**** List of PLAYBACK Hardware Devices ****
card 0: Intel [HDA Intel], device 0: ALC889A Analog [ALC889A Analog]
  Subdevices: 0/1
  Subdevice #0: subdevice #0
card 0: Intel [HDA Intel], device 1: ALC889A Digital [ALC889A Digital]
  Subdevices: 1/1
  Subdevice #0: subdevice #0

ARECORD

**** List of CAPTURE Hardware Devices ****
card 0: Intel [HDA Intel], device 0: ALC889A Analog [ALC889A Analog]
  Subdevices: 1/1
  Subdevice #0: subdevice #0
card 0: Intel [HDA Intel], device 1: ALC889A Digital [ALC889A Digital]
  Subdevices: 1/1
  Subdevice #0: subdevice #0
card 0: Intel [HDA Intel], device 2: ALC889A Analog [ALC889A Analog]
  Subdevices: 2/2
  Subdevice #0: subdevice #0
  Subdevice #1: subdevice #1

!!Amixer output
!!-------------

!!-------Mixer controls for card 0 [Intel]

Card hw:0 'Intel'/'HDA Intel at 0xeb200000 irq 45'
  Mixer name	: 'Realtek ALC889A'
  Components	: 'HDA:10ec0885,1458a102,00100101'
  Controls      : 42
  Simple ctrls  : 24
Simple mixer control 'Master',0
  Capabilities: pvolume pvolume-joined pswitch pswitch-joined penum
  Playback channels: Mono
  Limits: Playback 0 - 64
  Mono: Playback 51 [80%] [-13.00dB] [on]
Simple mixer control 'Headphone',0
  Capabilities: pswitch penum
  Playback channels: Front Left - Front Right
  Mono:
  Front Left: Playback [off]
  Front Right: Playback [off]
Simple mixer control 'PCM',0
  Capabilities: pvolume penum
  Playback channels: Front Left - Front Right
  Limits: Playback 0 - 255
  Mono:
  Front Left: Playback 89 [35%] [-33.20dB]
  Front Right: Playback 89 [35%] [-33.20dB]
Simple mixer control 'Front',0
  Capabilities: pvolume pswitch penum
  Playback channels: Front Left - Front Right
  Limits: Playback 0 - 64
  Mono:
  Front Left: Playback 62 [97%] [-2.00dB] [on]
  Front Right: Playback 62 [97%] [-2.00dB] [on]
Simple mixer control 'Front Mic',0
  Capabilities: pvolume pswitch penum
  Playback channels: Front Left - Front Right
  Limits: Playback 0 - 31
  Mono:
  Front Left: Playback 0 [0%] [-34.50dB] [off]
  Front Right: Playback 0 [0%] [-34.50dB] [off]
Simple mixer control 'Front Mic Boost',0
  Capabilities: volume penum
  Playback channels: Front Left - Front Right
  Capture channels: Front Left - Front Right
  Limits: 0 - 3
  Front Left: 0 [0%]
  Front Right: 0 [0%]
Simple mixer control 'Surround',0
  Capabilities: pvolume pswitch penum
  Playback channels: Front Left - Front Right
  Limits: Playback 0 - 64
  Mono:
  Front Left: Playback 0 [0%] [-64.00dB] [off]
  Front Right: Playback 0 [0%] [-64.00dB] [off]
Simple mixer control 'Center',0
  Capabilities: pvolume pvolume-joined pswitch pswitch-joined penum
  Playback channels: Mono
  Limits: Playback 0 - 64
  Mono: Playback 0 [0%] [-64.00dB] [off]
Simple mixer control 'LFE',0
  Capabilities: pvolume pvolume-joined pswitch pswitch-joined penum
  Playback channels: Mono
  Limits: Playback 0 - 64
  Mono: Playback 0 [0%] [-64.00dB] [off]
Simple mixer control 'Side',0
  Capabilities: pvolume pswitch penum
  Playback channels: Front Left - Front Right
  Limits: Playback 0 - 64
  Mono:
  Front Left: Playback 0 [0%] [-64.00dB] [off]
  Front Right: Playback 0 [0%] [-64.00dB] [off]
Simple mixer control 'Line',0
  Capabilities: pvolume pswitch penum
  Playback channels: Front Left - Front Right
  Limits: Playback 0 - 31
  Mono:
  Front Left: Playback 23 [74%] [0.00dB] [on]
  Front Right: Playback 23 [74%] [0.00dB] [on]
Simple mixer control 'CD',0
  Capabilities: pvolume pswitch penum
  Playback channels: Front Left - Front Right
  Limits: Playback 0 - 31
  Mono:
  Front Left: Playback 23 [74%] [0.00dB] [on]
  Front Right: Playback 23 [74%] [0.00dB] [on]
Simple mixer control 'Mic',0
  Capabilities: pvolume pswitch penum
  Playback channels: Front Left - Front Right
  Limits: Playback 0 - 31
  Mono:
  Front Left: Playback 0 [0%] [-34.50dB] [off]
  Front Right: Playback 0 [0%] [-34.50dB] [off]
Simple mixer control 'Mic Boost',0
  Capabilities: volume penum
  Playback channels: Front Left - Front Right
  Capture channels: Front Left - Front Right
  Limits: 0 - 3
  Front Left: 0 [0%]
  Front Right: 0 [0%]
Simple mixer control 'IEC958',0
  Capabilities: pswitch pswitch-joined cswitch cswitch-joined penum
  Playback channels: Mono
  Capture channels: Mono
  Mono: Playback [on] Capture [off]
Simple mixer control 'IEC958 Default PCM',0
  Capabilities: pswitch pswitch-joined penum
  Playback channels: Mono
  Mono: Playback [on]
Simple mixer control 'Capture',0
  Capabilities: cvolume cswitch penum
  Capture channels: Front Left - Front Right
  Limits: Capture 0 - 46
  Front Left: Capture 0 [0%] [-16.00dB] [off]
  Front Right: Capture 0 [0%] [-16.00dB] [off]
Simple mixer control 'Capture',1
  Capabilities: cvolume cswitch penum
  Capture channels: Front Left - Front Right
  Limits: Capture 0 - 46
  Front Left: Capture 0 [0%] [-16.00dB] [off]
  Front Right: Capture 0 [0%] [-16.00dB] [off]
Simple mixer control 'Capture',2
  Capabilities: cvolume cswitch penum
  Capture channels: Front Left - Front Right
  Limits: Capture 0 - 46
  Front Left: Capture 0 [0%] [-16.00dB] [off]
  Front Right: Capture 0 [0%] [-16.00dB] [off]
Simple mixer control 'Channel Mode',0
  Capabilities: enum
  Items: '6ch' '8ch'
  Item0: '6ch'
Simple mixer control 'Digital',0
  Capabilities: cvolume penum
  Capture channels: Front Left - Front Right
  Limits: Capture 0 - 120
  Front Left: Capture 60 [50%] [0.00dB]
  Front Right: Capture 60 [50%] [0.00dB]
Simple mixer control 'Input Source',0
  Capabilities: cenum
  Items: 'Mic' 'Front Mic' 'Line' 'CD'
  Item0: 'Mic'
Simple mixer control 'Input Source',1
  Capabilities: cenum
  Items: 'Mic' 'Front Mic' 'Line' 'CD'
  Item0: 'Mic'
Simple mixer control 'Input Source',2
  Capabilities: cenum
  Items: 'Mic' 'Front Mic' 'Line' 'CD'
  Item0: 'Mic'


!!Alsactl output
!!-------------

--startcollapse--
state.Intel {
	control.1 {
		comment.access 'read write'
		comment.type INTEGER
		comment.count 2
		comment.range '0 - 64'
		comment.dbmin -6400
		comment.dbmax 0
		iface MIXER
		name 'Front Playback Volume'
		value.0 62
		value.1 62
	}
	control.2 {
		comment.access 'read write'
		comment.type BOOLEAN
		comment.count 2
		iface MIXER
		name 'Front Playback Switch'
		value.0 true
		value.1 true
	}
	control.3 {
		comment.access 'read write'
		comment.type INTEGER
		comment.count 2
		comment.range '0 - 64'
		comment.dbmin -6400
		comment.dbmax 0
		iface MIXER
		name 'Surround Playback Volume'
		value.0 0
		value.1 0
	}
	control.4 {
		comment.access 'read write'
		comment.type BOOLEAN
		comment.count 2
		iface MIXER
		name 'Surround Playback Switch'
		value.0 false
		value.1 false
	}
	control.5 {
		comment.access 'read write'
		comment.type INTEGER
		comment.count 1
		comment.range '0 - 64'
		comment.dbmin -6400
		comment.dbmax 0
		iface MIXER
		name 'Center Playback Volume'
		value 0
	}
	control.6 {
		comment.access 'read write'
		comment.type INTEGER
		comment.count 1
		comment.range '0 - 64'
		comment.dbmin -6400
		comment.dbmax 0
		iface MIXER
		name 'LFE Playback Volume'
		value 0
	}
	control.7 {
		comment.access 'read write'
		comment.type BOOLEAN
		comment.count 1
		iface MIXER
		name 'Center Playback Switch'
		value false
	}
	control.8 {
		comment.access 'read write'
		comment.type BOOLEAN
		comment.count 1
		iface MIXER
		name 'LFE Playback Switch'
		value false
	}
	control.9 {
		comment.access 'read write'
		comment.type INTEGER
		comment.count 2
		comment.range '0 - 64'
		comment.dbmin -6400
		comment.dbmax 0
		iface MIXER
		name 'Side Playback Volume'
		value.0 0
		value.1 0
	}
	control.10 {
		comment.access 'read write'
		comment.type BOOLEAN
		comment.count 2
		iface MIXER
		name 'Side Playback Switch'
		value.0 false
		value.1 false
	}
	control.11 {
		comment.access 'read write'
		comment.type BOOLEAN
		comment.count 2
		iface MIXER
		name 'Headphone Playback Switch'
		value.0 false
		value.1 false
	}
	control.12 {
		comment.access 'read write'
		comment.type INTEGER
		comment.count 2
		comment.range '0 - 31'
		comment.dbmin -3450
		comment.dbmax 1200
		iface MIXER
		name 'CD Playback Volume'
		value.0 23
		value.1 23
	}
	control.13 {
		comment.access 'read write'
		comment.type BOOLEAN
		comment.count 2
		iface MIXER
		name 'CD Playback Switch'
		value.0 true
		value.1 true
	}
	control.14 {
		comment.access 'read write'
		comment.type INTEGER
		comment.count 2
		comment.range '0 - 31'
		comment.dbmin -3450
		comment.dbmax 1200
		iface MIXER
		name 'Line Playback Volume'
		value.0 23
		value.1 23
	}
	control.15 {
		comment.access 'read write'
		comment.type BOOLEAN
		comment.count 2
		iface MIXER
		name 'Line Playback Switch'
		value.0 true
		value.1 true
	}
	control.16 {
		comment.access 'read write'
		comment.type INTEGER
		comment.count 2
		comment.range '0 - 31'
		comment.dbmin -3450
		comment.dbmax 1200
		iface MIXER
		name 'Mic Playback Volume'
		value.0 0
		value.1 0
	}
	control.17 {
		comment.access 'read write'
		comment.type INTEGER
		comment.count 2
		comment.range '0 - 3'
		comment.dbmin 0
		comment.dbmax 3000
		iface MIXER
		name 'Mic Boost'
		value.0 0
		value.1 0
	}
	control.18 {
		comment.access 'read write'
		comment.type BOOLEAN
		comment.count 2
		iface MIXER
		name 'Mic Playback Switch'
		value.0 false
		value.1 false
	}
	control.19 {
		comment.access 'read write'
		comment.type INTEGER
		comment.count 2
		comment.range '0 - 31'
		comment.dbmin -3450
		comment.dbmax 1200
		iface MIXER
		name 'Front Mic Playback Volume'
		value.0 0
		value.1 0
	}
	control.20 {
		comment.access 'read write'
		comment.type INTEGER
		comment.count 2
		comment.range '0 - 3'
		comment.dbmin 0
		comment.dbmax 3000
		iface MIXER
		name 'Front Mic Boost'
		value.0 0
		value.1 0
	}
	control.21 {
		comment.access 'read write'
		comment.type BOOLEAN
		comment.count 2
		iface MIXER
		name 'Front Mic Playback Switch'
		value.0 false
		value.1 false
	}
	control.22 {
		comment.access 'read write'
		comment.type ENUMERATED
		comment.count 1
		comment.item.0 '6ch'
		comment.item.1 '8ch'
		iface MIXER
		name 'Channel Mode'
		value '6ch'
	}
	control.23 {
		comment.access 'read write'
		comment.type BOOLEAN
		comment.count 2
		iface MIXER
		name 'Capture Switch'
		value.0 false
		value.1 false
	}
	control.24 {
		comment.access 'read write'
		comment.type BOOLEAN
		comment.count 2
		iface MIXER
		name 'Capture Switch'
		index 1
		value.0 false
		value.1 false
	}
	control.25 {
		comment.access 'read write'
		comment.type BOOLEAN
		comment.count 2
		iface MIXER
		name 'Capture Switch'
		index 2
		value.0 false
		value.1 false
	}
	control.26 {
		comment.access 'read write'
		comment.type INTEGER
		comment.count 2
		comment.range '0 - 46'
		comment.dbmin -1600
		comment.dbmax 3000
		iface MIXER
		name 'Capture Volume'
		value.0 0
		value.1 0
	}
	control.27 {
		comment.access 'read write'
		comment.type INTEGER
		comment.count 2
		comment.range '0 - 46'
		comment.dbmin -1600
		comment.dbmax 3000
		iface MIXER
		name 'Capture Volume'
		index 1
		value.0 0
		value.1 0
	}
	control.28 {
		comment.access 'read write'
		comment.type INTEGER
		comment.count 2
		comment.range '0 - 46'
		comment.dbmin -1600
		comment.dbmax 3000
		iface MIXER
		name 'Capture Volume'
		index 2
		value.0 0
		value.1 0
	}
	control.29 {
		comment.access 'read write'
		comment.type ENUMERATED
		comment.count 1
		comment.item.0 Mic
		comment.item.1 'Front Mic'
		comment.item.2 Line
		comment.item.3 CD
		iface MIXER
		name 'Input Source'
		value Mic
	}
	control.30 {
		comment.access 'read write'
		comment.type ENUMERATED
		comment.count 1
		comment.item.0 Mic
		comment.item.1 'Front Mic'
		comment.item.2 Line
		comment.item.3 CD
		iface MIXER
		name 'Input Source'
		index 1
		value Mic
	}
	control.31 {
		comment.access 'read write'
		comment.type ENUMERATED
		comment.count 1
		comment.item.0 Mic
		comment.item.1 'Front Mic'
		comment.item.2 Line
		comment.item.3 CD
		iface MIXER
		name 'Input Source'
		index 2
		value Mic
	}
	control.32 {
		comment.access read
		comment.type IEC958
		comment.count 1
		iface MIXER
		name 'IEC958 Playback Con Mask'
		value '0fff000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000'
	}
	control.33 {
		comment.access read
		comment.type IEC958
		comment.count 1
		iface MIXER
		name 'IEC958 Playback Pro Mask'
		value '0f00000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000'
	}
	control.34 {
		comment.access 'read write'
		comment.type IEC958
		comment.count 1
		iface MIXER
		name 'IEC958 Playback Default'
		value '0400000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000'
	}
	control.35 {
		comment.access 'read write'
		comment.type BOOLEAN
		comment.count 1
		iface MIXER
		name 'IEC958 Playback Switch'
		value true
	}
	control.36 {
		comment.access 'read write'
		comment.type BOOLEAN
		comment.count 1
		iface MIXER
		name 'IEC958 Default PCM Playback Switch'
		value true
	}
	control.37 {
		comment.access 'read write'
		comment.type BOOLEAN
		comment.count 1
		iface MIXER
		name 'IEC958 Capture Switch'
		value false
	}
	control.38 {
		comment.access read
		comment.type IEC958
		comment.count 1
		iface MIXER
		name 'IEC958 Capture Default'
		value '0400000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000'
	}
	control.39 {
		comment.access 'read write'
		comment.type INTEGER
		comment.count 1
		comment.range '0 - 64'
		comment.dbmin -6400
		comment.dbmax 0
		iface MIXER
		name 'Master Playback Volume'
		value 51
	}
	control.40 {
		comment.access 'read write'
		comment.type BOOLEAN
		comment.count 1
		iface MIXER
		name 'Master Playback Switch'
		value true
	}
	control.41 {
		comment.access 'read write user'
		comment.type INTEGER
		comment.count 2
		comment.range '0 - 255'
		comment.tlv '0000000100000008ffffec1400000014'
		comment.dbmin -5100
		comment.dbmax 0
		iface MIXER
		name 'PCM Playback Volume'
		value.0 89
		value.1 89
	}
	control.42 {
		comment.access 'read write user'
		comment.type INTEGER
		comment.count 2
		comment.range '0 - 120'
		comment.tlv '0000000100000008fffff44800000032'
		comment.dbmin -3000
		comment.dbmax 3000
		iface MIXER
		name 'Digital Capture Volume'
		value.0 60
		value.1 60
	}
}
--endcollapse--


!!All Loaded Modules
!!------------------

Module
ppdev
lp
sco
bridge
stp
bnep
rfcomm
l2cap
bluetooth
rfkill
ipv6
xt_owner
nf_conntrack_ftp
xt_state
xt_tcpudp
ipt_MASQUERADE
iptable_nat
nf_nat
nf_conntrack_ipv4
nf_conntrack
nf_defrag_ipv4
iptable_filter
ip_tables
ipt_REJECT
x_tables
ext3
jbd
fuse
coretemp
it87
hwmon_vid
sbp2
loop
nvidia
snd_hda_codec_realtek
snd_hda_intel
snd_hda_codec
snd_pcm_oss
snd_mixer_oss
snd_pcm
snd_seq_dummy
snd_seq_oss
snd_seq_midi
snd_rawmidi
snd_seq_midi_event
snd_seq
i2c_i801
snd_timer
snd_seq_device
i2c_core
snd
intel_agp
psmouse
serio_raw
evdev
pcspkr
parport_pc
soundcore
snd_page_alloc
parport
button
processor
ext4
mbcache
jbd2
crc16
sg
sr_mod
sd_mod
cdrom
ahci
libahci
ata_generic
ata_piix
libata
uhci_hcd
ohci1394
scsi_mod
jmicron
floppy
ide_pci_generic
ieee1394
r8169
thermal
mii
thermal_sys
ide_core
ehci_hcd


!!ALSA/HDA dmesg
!!------------------

[    5.385246]   alloc kstat_irqs on node -1
[    5.385254] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[    5.385351]   alloc irq_desc for 45 on node -1
[    5.385354]   alloc kstat_irqs on node -1
[    5.385363] HDA Intel 0000:00:1b.0: irq 45 for MSI/MSI-X
[    5.385389] HDA Intel 0000:00:1b.0: setting latency timer to 64
[    5.385393] ALSA sound/pci/hda/hda_intel.c:2516: chipset global capabilities = 0x4401
[    5.417517] ALSA sound/pci/hda/hda_intel.c:907: codec_mask = 0x4
[    5.417588] ALSA sound/pci/hda/hda_intel.c:1345: codec #2 probed OK
[    5.443744] ALSA sound/pci/hda/patch_realtek.c:1308: SKU: Nid=0x1d sku_cfg=0x4005e601
[    5.443749] ALSA sound/pci/hda/patch_realtek.c:1310: SKU: port_connectivity=0x1
[    5.443752] ALSA sound/pci/hda/patch_realtek.c:1311: SKU: enable_pcbeep=0x0
[    5.443754] ALSA sound/pci/hda/patch_realtek.c:1312: SKU: check_sum=0x00000005
[    5.443757] ALSA sound/pci/hda/patch_realtek.c:1313: SKU: customization=0x000000e6
[    5.443760] ALSA sound/pci/hda/patch_realtek.c:1314: SKU: external_amp=0x0
[    5.443762] ALSA sound/pci/hda/patch_realtek.c:1315: SKU: platform_type=0x0
[    5.443765] ALSA sound/pci/hda/patch_realtek.c:1316: SKU: swap=0x0
[    5.443767] ALSA sound/pci/hda/patch_realtek.c:1317: SKU: override=0x1
[    5.443770] ALSA sound/pci/hda/hda_codec.c:3544: hda_codec: model '6stack-dig' is selected for config 1458:a002 (Gigabyte P35 DS3R)
[    5.443828] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input5
[    5.446363] ALSA sound/pci/hda/hda_codec.c:2008: Cannot find slave Headphone Playback Volume, skipped
[    5.446367] ALSA sound/pci/hda/hda_codec.c:2008: Cannot find slave Speaker Playback Volume, skipped
[    5.446370] ALSA sound/pci/hda/hda_codec.c:2008: Cannot find slave Mono Playback Volume, skipped
[    5.446373] ALSA sound/pci/hda/hda_codec.c:2008: Cannot find slave Line-Out Playback Volume, skipped
[    5.446376] ALSA sound/pci/hda/hda_codec.c:2008: Cannot find slave PCM Playback Volume, skipped
[    5.446388] ALSA sound/pci/hda/hda_codec.c:2008: Cannot find slave Speaker Playback Switch, skipped
[    5.446391] ALSA sound/pci/hda/hda_codec.c:2008: Cannot find slave Mono Playback Switch, skipped
[    5.446396] ALSA sound/pci/hda/hda_codec.c:2008: Cannot find slave Line-Out Playback Switch, skipped
[    5.446399] ALSA sound/pci/hda/hda_codec.c:2008: Cannot find slave PCM Playback Switch, skipped
[    6.089110] nvidia 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
--
[   24.854960] i2c i2c-6: adapter [NVIDIA i2c adapter ] registered
[   60.278755] ALSA sound/pci/hda/hda_codec.c:1202: hda_codec_cleanup_stream: NID=0x6
[   60.282271] ALSA sound/pci/hda/hda_codec.c:1202: hda_codec_cleanup_stream: NID=0xa
[   60.400209] ALSA sound/pci/hda/hda_intel.c:1668: azx_pcm_prepare: bufsize=0x10000, format=0x31
[   60.400224] ALSA sound/pci/hda/hda_codec.c:1184: hda_codec_setup_stream: NID=0x6, stream=0x5, channel=0, format=0x31
[   60.408037] ALSA sound/pci/hda/hda_codec.c:1184: hda_codec_setup_stream: NID=0x2, stream=0x5, channel=0, format=0x31
[   60.416023] ALSA sound/pci/hda/hda_codec.c:1184: hda_codec_setup_stream: NID=0x3, stream=0x5, channel=0, format=0x31
[   60.424027] ALSA sound/pci/hda/hda_codec.c:1184: hda_codec_setup_stream: NID=0x4, stream=0x5, channel=0, format=0x31
[   60.432023] ALSA sound/pci/hda/hda_codec.c:1184: hda_codec_setup_stream: NID=0x5, stream=0x5, channel=0, format=0x31
[   60.441301] ALSA sound/pci/hda/hda_codec.c:1202: hda_codec_cleanup_stream: NID=0x2
[   60.441306] ALSA sound/pci/hda/hda_codec.c:1202: hda_codec_cleanup_stream: NID=0x3
[   60.441310] ALSA sound/pci/hda/hda_codec.c:1202: hda_codec_cleanup_stream: NID=0x4
[   60.441313] ALSA sound/pci/hda/hda_codec.c:1202: hda_codec_cleanup_stream: NID=0x5
[   60.441318] ALSA sound/pci/hda/hda_codec.c:1202: hda_codec_cleanup_stream: NID=0x6
[   60.777175] ALSA sound/pci/hda/hda_intel.c:1668: azx_pcm_prepare: bufsize=0x10000, format=0x31
[   60.777188] ALSA sound/pci/hda/hda_codec.c:1184: hda_codec_setup_stream: NID=0x6, stream=0x5, channel=0, format=0x31
[   60.788026] ALSA sound/pci/hda/hda_codec.c:1184: hda_codec_setup_stream: NID=0x2, stream=0x5, channel=0, format=0x31
[   60.796026] ALSA sound/pci/hda/hda_codec.c:1184: hda_codec_setup_stream: NID=0x3, stream=0x5, channel=0, format=0x31
[   60.804022] ALSA sound/pci/hda/hda_codec.c:1184: hda_codec_setup_stream: NID=0x4, stream=0x5, channel=0, format=0x31
[   60.812018] ALSA sound/pci/hda/hda_codec.c:1184: hda_codec_setup_stream: NID=0x5, stream=0x5, channel=0, format=0x31
[   60.820842] ALSA sound/pci/hda/hda_codec.c:1202: hda_codec_cleanup_stream: NID=0x2
[   60.820847] ALSA sound/pci/hda/hda_codec.c:1202: hda_codec_cleanup_stream: NID=0x3
[   60.820850] ALSA sound/pci/hda/hda_codec.c:1202: hda_codec_cleanup_stream: NID=0x4
[   60.820854] ALSA sound/pci/hda/hda_codec.c:1202: hda_codec_cleanup_stream: NID=0x5
[   60.820857] ALSA sound/pci/hda/hda_codec.c:1202: hda_codec_cleanup_stream: NID=0x6
[   60.821860] ALSA sound/pci/hda/hda_intel.c:1668: azx_pcm_prepare: bufsize=0x10000, format=0x31
[   60.821871] ALSA sound/pci/hda/hda_codec.c:1184: hda_codec_setup_stream: NID=0x6, stream=0x5, channel=0, format=0x31
[   60.828520] ALSA sound/pci/hda/hda_codec.c:1184: hda_codec_setup_stream: NID=0x2, stream=0x5, channel=0, format=0x31
[   60.836520] ALSA sound/pci/hda/hda_codec.c:1184: hda_codec_setup_stream: NID=0x3, stream=0x5, channel=0, format=0x31
[   60.844514] ALSA sound/pci/hda/hda_codec.c:1184: hda_codec_setup_stream: NID=0x4, stream=0x5, channel=0, format=0x31
[   60.852520] ALSA sound/pci/hda/hda_codec.c:1184: hda_codec_setup_stream: NID=0x5, stream=0x5, channel=0, format=0x31
[   60.860862] ALSA sound/pci/hda/hda_codec.c:1202: hda_codec_cleanup_stream: NID=0x2
[   60.860866] ALSA sound/pci/hda/hda_codec.c:1202: hda_codec_cleanup_stream: NID=0x3
[   60.860870] ALSA sound/pci/hda/hda_codec.c:1202: hda_codec_cleanup_stream: NID=0x4
[   60.860873] ALSA sound/pci/hda/hda_codec.c:1202: hda_codec_cleanup_stream: NID=0x5
[   60.860876] ALSA sound/pci/hda/hda_codec.c:1202: hda_codec_cleanup_stream: NID=0x6
[   62.695984] ALSA sound/pci/hda/hda_intel.c:1668: azx_pcm_prepare: bufsize=0x10000, format=0x31
[   62.695996] ALSA sound/pci/hda/hda_codec.c:1184: hda_codec_setup_stream: NID=0x6, stream=0x5, channel=0, format=0x31
[   62.705014] ALSA sound/pci/hda/hda_codec.c:1184: hda_codec_setup_stream: NID=0x2, stream=0x5, channel=0, format=0x31
[   62.713155] ALSA sound/pci/hda/hda_codec.c:1184: hda_codec_setup_stream: NID=0x3, stream=0x5, channel=0, format=0x31
[   62.721522] ALSA sound/pci/hda/hda_codec.c:1184: hda_codec_setup_stream: NID=0x4, stream=0x5, channel=0, format=0x31
[   62.729516] ALSA sound/pci/hda/hda_codec.c:1184: hda_codec_setup_stream: NID=0x5, stream=0x5, channel=0, format=0x31
[   71.099607] ALSA sound/pci/hda/hda_codec.c:1202: hda_codec_cleanup_stream: NID=0x2
[   71.099614] ALSA sound/pci/hda/hda_codec.c:1202: hda_codec_cleanup_stream: NID=0x3
[   71.099618] ALSA sound/pci/hda/hda_codec.c:1202: hda_codec_cleanup_stream: NID=0x4
[   71.099621] ALSA sound/pci/hda/hda_codec.c:1202: hda_codec_cleanup_stream: NID=0x5
[   71.099625] ALSA sound/pci/hda/hda_codec.c:1202: hda_codec_cleanup_stream: NID=0x6
[   94.300938] ALSA sound/pci/hda/hda_intel.c:1668: azx_pcm_prepare: bufsize=0x10000, format=0x31
[   94.300950] ALSA sound/pci/hda/hda_codec.c:1184: hda_codec_setup_stream: NID=0x6, stream=0x5, channel=0, format=0x31
[   94.312021] ALSA sound/pci/hda/hda_codec.c:1184: hda_codec_setup_stream: NID=0x2, stream=0x5, channel=0, format=0x31
[   94.320017] ALSA sound/pci/hda/hda_codec.c:1184: hda_codec_setup_stream: NID=0x3, stream=0x5, channel=0, format=0x31
[   94.328049] ALSA sound/pci/hda/hda_codec.c:1184: hda_codec_setup_stream: NID=0x4, stream=0x5, channel=0, format=0x31
[   94.336011] ALSA sound/pci/hda/hda_codec.c:1184: hda_codec_setup_stream: NID=0x5, stream=0x5, channel=0, format=0x31
[   94.344618] ALSA sound/pci/hda/hda_codec.c:1202: hda_codec_cleanup_stream: NID=0x2
[   94.344622] ALSA sound/pci/hda/hda_codec.c:1202: hda_codec_cleanup_stream: NID=0x3
[   94.344626] ALSA sound/pci/hda/hda_codec.c:1202: hda_codec_cleanup_stream: NID=0x4
[   94.344629] ALSA sound/pci/hda/hda_codec.c:1202: hda_codec_cleanup_stream: NID=0x5
[   94.344632] ALSA sound/pci/hda/hda_codec.c:1202: hda_codec_cleanup_stream: NID=0x6
[  106.605272] ALSA sound/pci/hda/hda_intel.c:1668: azx_pcm_prepare: bufsize=0x10000, format=0x31
[  106.605345] ALSA sound/pci/hda/hda_codec.c:1184: hda_codec_setup_stream: NID=0x6, stream=0x5, channel=0, format=0x31
[  106.612516] ALSA sound/pci/hda/hda_codec.c:1184: hda_codec_setup_stream: NID=0x2, stream=0x5, channel=0, format=0x31
[  106.620513] ALSA sound/pci/hda/hda_codec.c:1184: hda_codec_setup_stream: NID=0x3, stream=0x5, channel=0, format=0x31
[  106.628519] ALSA sound/pci/hda/hda_codec.c:1184: hda_codec_setup_stream: NID=0x4, stream=0x5, channel=0, format=0x31
[  106.636514] ALSA sound/pci/hda/hda_codec.c:1184: hda_codec_setup_stream: NID=0x5, stream=0x5, channel=0, format=0x31

Re: Intel sound proke in today;s next

[Piotr Hosowicz]

On 26.07.2010 20:30, Piotr Hosowicz wrote:
> On 26.07.2010 20:00, Takashi Iwai wrote:
>> At Mon, 26 Jul 2010 19:33:37 +0200,
>> Piotr Hosowicz wrote:
>>>
>>> On 26.07.2010 19:24, Takashi Iwai wrote:
>>>> At Mon, 26 Jul 2010 18:57:22 +0200,
>>>> Piotr Hosowicz wrote:
>>>>>
>>>>> On 26.07.2010 09:29, Takashi Iwai wrote:
>>>>>> At Sun, 25 Jul 2010 17:56:50 +0200,
>>>>>> Piotr Hosowicz wrote:
>>>>>>>
>>>>>>> On 25.07.2010 17:27, Takashi Iwai wrote:
>>>>>>>> At Sat, 24 Jul 2010 11:59:00 +1000,
>>>>>>>> Stephen Rothwell wrote:
>>>>>>>>>
>>>>>>>>> [Just cc'ing the sound tree contact]
>>>>>>>>>
>>>>>>>>> On Fri, 23 Jul 2010 20:24:36 +0200 Piotr
>>>>>>>>> Hosowicz<piotr@hosowicz.com> wrote:
>>>>>>>>>>
>>>>>>>>>> Hello,
>>>>>>>>>>
>>>>>>>>>> I just downloaded today's next and built it, then booted.
>>>>>>>>>> Sound is not
>>>>>>>>>> working, my card is:
>>>>>>>>>>
>>>>>>>>>> 00:1b.0 Audio device: Intel Corporation 82801JI (ICH10 Family)
>>>>>>>>>> HD Audio
>>>>>>>>>> Controller
>>>>>>>>>>
>>>>>>>>>> I am now booted with latest git kernel and cannot provide more
>>>>>>>>>> info
>>>>>>>>>> here, I rebooted with that kernel because I am going to sleep
>>>>>>>>>> and I like
>>>>>>>>>> to listen to music by night. If more details is necessary I
>>>>>>>>>> could boot
>>>>>>>>>> that next tommorow, but tell me what you need.
>>>>>>>>
>>>>>>>> Make sure that your mixer setup is correct with a new kernel.
>>>>>>>> Usually alsactl restores the right mixer values, though.
>>>>>>>>
>>>>>>>> At best, run alsa-info.sh (with --no-upload option) on both
>>>>>>>> kernels to
>>>>>>>> compare. Also you can try to pull only sound git tree instead of
>>>>>>>> linux-kernel to identify whether it's a problem in the sound
>>>>>>>> tree or
>>>>>>>> somewhere else. Anyway, see
>>>>>>>> Documentation/sound/alsa/HD-Audio.txt for
>>>>>>>> some details.
>>>>>>>
>>>>>>> I do not see such script, alsa-info.sh.
>>>>>>
>>>>>> The location of the script is found in the document mentioned above.
>>>>>>
>>>>>>> I dont know how to pull only the
>>>>>>> sound tree.
>>>>>>
>>>>>> The sound git tree URL is found in the document mentioned above.
>>>>>> Just do git-pull onto your cloned Linus tree.
>>>>>
>>>>> I don't knmow how to pull _onto_ existing files. git says that it
>>>>> is not
>>>>> a repo and refuses to download files, I thought that first I have to
>>>>> make git clone, but I was happy that it's not like that.
>>>>
>>>> First clone, then pull onto it,
>>>>
>>>> % git clone
>>>> git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6.git
>>>> % cd linux-2.6
>>>> % git pull
>>>> git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6.git
>>>
>>> This is what I tried but the second git invocation failed saying that
>>> thre is no repo info in that directory.
>>
>> You need to pass the branch. In this case, pass for-next
>
> I passed topic/hda and rebuilt the kernel and now everything is working.

I have just git pulled for-next and saw many files downloaded so I 
wonder how synced with topic/hda it's working.

Regards,

Piotr Hosowicz

-- 
Zawartość usunięta.
Państwowy Urząd Kontroli Sygnaturek
NP: Peter Green Splinter Group - There's A River
NB: 2.6.35-rc6-20100726-1827-sndfix+

Re: Intel sound proke in today;s next

[Takashi Iwai]

At Mon, 26 Jul 2010 21:03:32 +0200,
Piotr Hosowicz wrote:
> 
> On 26.07.2010 20:30, Piotr Hosowicz wrote:
> > On 26.07.2010 20:00, Takashi Iwai wrote:
> >> At Mon, 26 Jul 2010 19:33:37 +0200,
> >> Piotr Hosowicz wrote:
> >>>
> >>> On 26.07.2010 19:24, Takashi Iwai wrote:
> >>>> At Mon, 26 Jul 2010 18:57:22 +0200,
> >>>> Piotr Hosowicz wrote:
> >>>>>
> >>>>> On 26.07.2010 09:29, Takashi Iwai wrote:
> >>>>>> At Sun, 25 Jul 2010 17:56:50 +0200,
> >>>>>> Piotr Hosowicz wrote:
> >>>>>>>
> >>>>>>> On 25.07.2010 17:27, Takashi Iwai wrote:
> >>>>>>>> At Sat, 24 Jul 2010 11:59:00 +1000,
> >>>>>>>> Stephen Rothwell wrote:
> >>>>>>>>>
> >>>>>>>>> [Just cc'ing the sound tree contact]
> >>>>>>>>>
> >>>>>>>>> On Fri, 23 Jul 2010 20:24:36 +0200 Piotr
> >>>>>>>>> Hosowicz<piotr@hosowicz.com> wrote:
> >>>>>>>>>>
> >>>>>>>>>> Hello,
> >>>>>>>>>>
> >>>>>>>>>> I just downloaded today's next and built it, then booted.
> >>>>>>>>>> Sound is not
> >>>>>>>>>> working, my card is:
> >>>>>>>>>>
> >>>>>>>>>> 00:1b.0 Audio device: Intel Corporation 82801JI (ICH10 Family)
> >>>>>>>>>> HD Audio
> >>>>>>>>>> Controller
> >>>>>>>>>>
> >>>>>>>>>> I am now booted with latest git kernel and cannot provide more
> >>>>>>>>>> info
> >>>>>>>>>> here, I rebooted with that kernel because I am going to sleep
> >>>>>>>>>> and I like
> >>>>>>>>>> to listen to music by night. If more details is necessary I
> >>>>>>>>>> could boot
> >>>>>>>>>> that next tommorow, but tell me what you need.
> >>>>>>>>
> >>>>>>>> Make sure that your mixer setup is correct with a new kernel.
> >>>>>>>> Usually alsactl restores the right mixer values, though.
> >>>>>>>>
> >>>>>>>> At best, run alsa-info.sh (with --no-upload option) on both
> >>>>>>>> kernels to
> >>>>>>>> compare. Also you can try to pull only sound git tree instead of
> >>>>>>>> linux-kernel to identify whether it's a problem in the sound
> >>>>>>>> tree or
> >>>>>>>> somewhere else. Anyway, see
> >>>>>>>> Documentation/sound/alsa/HD-Audio.txt for
> >>>>>>>> some details.
> >>>>>>>
> >>>>>>> I do not see such script, alsa-info.sh.
> >>>>>>
> >>>>>> The location of the script is found in the document mentioned above.
> >>>>>>
> >>>>>>> I dont know how to pull only the
> >>>>>>> sound tree.
> >>>>>>
> >>>>>> The sound git tree URL is found in the document mentioned above.
> >>>>>> Just do git-pull onto your cloned Linus tree.
> >>>>>
> >>>>> I don't knmow how to pull _onto_ existing files. git says that it
> >>>>> is not
> >>>>> a repo and refuses to download files, I thought that first I have to
> >>>>> make git clone, but I was happy that it's not like that.
> >>>>
> >>>> First clone, then pull onto it,
> >>>>
> >>>> % git clone
> >>>> git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6.git
> >>>> % cd linux-2.6
> >>>> % git pull
> >>>> git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6.git
> >>>
> >>> This is what I tried but the second git invocation failed saying that
> >>> thre is no repo info in that directory.
> >>
> >> You need to pass the branch. In this case, pass for-next
> >
> > I passed topic/hda and rebuilt the kernel and now everything is working.
> 
> I have just git pulled for-next and saw many files downloaded so I 
> wonder how synced with topic/hda it's working.

It contains other two branches, topic/misc and topic/asoc.
(Also sometimes missing fix/asoc and fix/misc merges).

topic/asoc branch is specific to ASoC, so very likely irrelevant.
If any, some changes in the sound core code in topic/misc might
influence in your case...


Takashi

Re: Intel sound proke in today;s next

[Piotr Hosowicz]

On 26.07.2010 22:17, Takashi Iwai wrote:

>>>> You need to pass the branch. In this case, pass for-next
>>>
>>> I passed topic/hda and rebuilt the kernel and now everything is working.
>>
>> I have just git pulled for-next and saw many files downloaded so I
>> wonder how synced with topic/hda it's working.
>
> It contains other two branches, topic/misc and topic/asoc.
> (Also sometimes missing fix/asoc and fix/misc merges).
>
> topic/asoc branch is specific to ASoC, so very likely irrelevant.
> If any, some changes in the sound core code in topic/misc might
> influence in your case...

Ok, so I'll use for-next then. Thank you again, you taught me a lot.

Regards,

Piotr Hosowicz

-- 
Zatrzymuje się samochód na sejmowym parkingu. Podchodzi do niego 
ochroniarz i mówi:
- Pan tu parkuje?! Tu Sejm ... Ministrowie, politycy, posłowiei ...
- Dzięki, włączę alarm.
NP: Patrick O'Hearn - Magnificent River
NB: 2.6.35-rc6-20100726-1827-sndfix+

Re: Intel sound proke in today;s next

[Takashi Iwai]

At Mon, 26 Jul 2010 22:54:42 +0200,
Piotr Hosowicz wrote:
> 
> On 26.07.2010 22:17, Takashi Iwai wrote:
> 
> >>>> You need to pass the branch. In this case, pass for-next
> >>>
> >>> I passed topic/hda and rebuilt the kernel and now everything is working.
> >>
> >> I have just git pulled for-next and saw many files downloaded so I
> >> wonder how synced with topic/hda it's working.
> >
> > It contains other two branches, topic/misc and topic/asoc.
> > (Also sometimes missing fix/asoc and fix/misc merges).
> >
> > topic/asoc branch is specific to ASoC, so very likely irrelevant.
> > If any, some changes in the sound core code in topic/misc might
> > influence in your case...
> 
> Ok, so I'll use for-next then. Thank you again, you taught me a lot.

I guess you hit the regression fixed right now, so slipped from
today's linux-next.  The patch is below.

(The reason why topic/hda branch worked is that I pulled the changes
 to  topic/misc branch from Jaroslav's tree because his branch
 contains more other changes than HD-audio specific.  And I forgot
 about this commit until today, grrr.)


thanks,

Takashi

---
>From 1a9bbe35dd5c0d0d6322d828779c2abbdd927340 Mon Sep 17 00:00:00 2001
From: David Henningsson <david.henningsson@canonical.com>
Date: Tue, 27 Jul 2010 00:10:34 +0200
Subject: [PATCH] ALSA: hda: Fixup commit 79c944ad (caused codec initialization failure)

Commit 79c944ad caused codecs not to be detected in some cases,
found on several Realtek codecs.

Signed-off-by: David Henningsson <david.henningsson@canonical.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
---
 sound/pci/hda/hda_codec.c |   13 +++++++------
 1 files changed, 7 insertions(+), 6 deletions(-)

diff --git a/sound/pci/hda/hda_codec.c b/sound/pci/hda/hda_codec.c
index 6e0de65..88f26e2 100644
--- a/sound/pci/hda/hda_codec.c
+++ b/sound/pci/hda/hda_codec.c
@@ -724,23 +724,24 @@ static int get_codec_name(struct hda_codec *codec)
  */
 static void /*__devinit*/ setup_fg_nodes(struct hda_codec *codec)
 {
-	int i, total_nodes, function_id;
+	int i, total_nodes, function_id, param_val;
 	hda_nid_t nid;
 
 	total_nodes = snd_hda_get_sub_nodes(codec, AC_NODE_ROOT, &nid);
 	for (i = 0; i < total_nodes; i++, nid++) {
-		function_id = snd_hda_param_read(codec, nid,
+		param_val = snd_hda_param_read(codec, nid,
 						AC_PAR_FUNCTION_TYPE);
+		function_id = param_val & 0xff;
 		switch (function_id) {
 		case AC_GRP_AUDIO_FUNCTION:
 			codec->afg = nid;
-			codec->afg_function_id = function_id & 0xff;
-			codec->afg_unsol = (function_id >> 8) & 1;
+			codec->afg_function_id = function_id;
+			codec->afg_unsol = (param_val >> 8) & 1;
 			break;
 		case AC_GRP_MODEM_FUNCTION:
 			codec->mfg = nid;
-			codec->mfg_function_id = function_id & 0xff;
-			codec->mfg_unsol = (function_id >> 8) & 1;
+			codec->mfg_function_id = function_id;
+			codec->mfg_unsol = (param_val >> 8) & 1;
 			break;
 		default:
 			break;
-- 
1.7.2

[PATCH wq#for-next] fscache: fix build on !CONFIG_SYSCTL

[Tejun Heo]

Commit 8b8edefa (fscache: convert object to use workqueue instead of
slow-work) made fscache_exit() call unregister_sysctl_table()
unconditionally breaking build when sysctl is disabled.  Fix it by
putting it inside CONFIG_SYSCTL.

Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-by: Randy Dunlap <randy.dunlap@oracle.com>
Cc: David Howells <dhowells@redhat.com>
---
This should fix it.  Thanks.

 fs/fscache/main.c |    2 ++
 1 files changed, 2 insertions(+), 0 deletions(-)

diff --git a/fs/fscache/main.c b/fs/fscache/main.c
index 500936d..f9d8567 100644
--- a/fs/fscache/main.c
+++ b/fs/fscache/main.c
@@ -186,7 +186,9 @@ static void __exit fscache_exit(void)

 	kobject_put(fscache_root);
 	kmem_cache_destroy(fscache_cookie_jar);
+#ifdef CONFIG_SYSCTL
 	unregister_sysctl_table(fscache_sysctl_header);
+#endif
 	fscache_proc_cleanup();
 	destroy_workqueue(fscache_op_wq);
 	destroy_workqueue(fscache_object_wq);
-- 
1.7.1

Re: [PATCH wq#for-next] fscache: fix build on !CONFIG_SYSCTL

[Randy Dunlap]

On 07/24/10 02:14, Tejun Heo wrote:
> Commit 8b8edefa (fscache: convert object to use workqueue instead of
> slow-work) made fscache_exit() call unregister_sysctl_table()
> unconditionally breaking build when sysctl is disabled.  Fix it by
> putting it inside CONFIG_SYSCTL.
> 
> Signed-off-by: Tejun Heo <tj@kernel.org>
> Reported-by: Randy Dunlap <randy.dunlap@oracle.com>
> Cc: David Howells <dhowells@redhat.com>
> ---
> This should fix it.  Thanks.

Ack.  Thanks.

> 
>  fs/fscache/main.c |    2 ++
>  1 files changed, 2 insertions(+), 0 deletions(-)
> 
> diff --git a/fs/fscache/main.c b/fs/fscache/main.c
> index 500936d..f9d8567 100644
> --- a/fs/fscache/main.c
> +++ b/fs/fscache/main.c
> @@ -186,7 +186,9 @@ static void __exit fscache_exit(void)
> 
>  	kobject_put(fscache_root);
>  	kmem_cache_destroy(fscache_cookie_jar);
> +#ifdef CONFIG_SYSCTL
>  	unregister_sysctl_table(fscache_sysctl_header);
> +#endif
>  	fscache_proc_cleanup();
>  	destroy_workqueue(fscache_op_wq);
>  	destroy_workqueue(fscache_object_wq);


-- 
~Randy
*** Remember to use Documentation/SubmitChecklist when testing your code ***

[PATCH -next] compal-laptop: depends on POWER_SUPPLY

[Randy Dunlap]

From: Randy Dunlap <randy.dunlap@oracle.com>

compal-laptop uses power_supply interfaces so it should depend
on POWER_SUPPLY.

ERROR: "power_supply_register" [drivers/platform/x86/compal-laptop.ko] undefined!
ERROR: "power_supply_unregister" [drivers/platform/x86/compal-laptop.ko] undefined!

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Cc:	Cezary Jackiewicz <cezary.jackiewicz@gmail.com>
Cc:	Matthew Garrett <mjg@redhat.com>
Cc:	platform-driver-x86@vger.kernel.org
---
 drivers/platform/x86/Kconfig |    1 +
 1 file changed, 1 insertion(+)

--- linux-next-20100723.orig/drivers/platform/x86/Kconfig
+++ linux-next-20100723/drivers/platform/x86/Kconfig
@@ -183,6 +183,7 @@ config COMPAL_LAPTOP
 	depends on BACKLIGHT_CLASS_DEVICE
 	depends on RFKILL
 	depends on HWMON
+	depends on POWER_SUPPLY
 	---help---
 	  This is a driver for laptops built by Compal: