From: Bjorn Andersson <bjorn.andersson@linaro.org>
To: David Heidelberg <david@ixit.cz>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>,
Andy Gross <agross@kernel.org>,
Linux Kernel Mailing List <linux-kernel@vger.kernel.org>,
Linux Next Mailing List <linux-next@vger.kernel.org>
Subject: Re: linux-next: build warning after merge of the qcom tree
Date: Sun, 24 Oct 2021 21:24:36 -0500 [thread overview]
Message-ID: <YXYVZF7ARs3HSh9+@yoga> (raw)
In-Reply-To: <LR9I1R.IR2MHJE8MRKZ1@ixit.cz>
On Sun 24 Oct 18:40 CDT 2021, David Heidelberg wrote:
> Hello,
>
> I believe patch "ARM: dts: qcom: fix typo in IPQ8064 thermal-sensor node"
> should solve it [1] (sent 4 days ago, not merged yet thou).
>
> David
> [1] https://lists.sr.ht/~okias/devicetree/patches/25837
>
> Best regards
> David Heidelberg
>
Thank you, I had indeed missed that. It's now picked up.
Regards,
Bjorn
> On Mon, Oct 25 2021 at 10:28:02 +1100, Stephen Rothwell
> <sfr@canb.auug.org.au> wrote:
> > Hi all,
> >
> > After merging the qcom tree, today's linux-next build (arm
> > multi_v7_defconfig) produced this warning:
> >
> > arch/arm/boot/dts/qcom-ipq8064.dtsi:52.19-70.5: Warning
> > (thermal_sensors_property): /thermal-zones/sensor0-thermal: Missing
> > property '#thermal-sensor-cells' in node
> > /soc/clock-controller@900000/thermal-sensor@900000 or bad phandle
> > (referred from thermal-sensors[0])
> > arch/arm/boot/dts/qcom-ipq8064.dtsi:72.19-90.5: Warning
> > (thermal_sensors_property): /thermal-zones/sensor1-thermal: Missing
> > property '#thermal-sensor-cells' in node
> > /soc/clock-controller@900000/thermal-sensor@900000 or bad phandle
> > (referred from thermal-sensors[0])
> > arch/arm/boot/dts/qcom-ipq8064.dtsi:92.19-110.5: Warning
> > (thermal_sensors_property): /thermal-zones/sensor2-thermal: Missing
> > property '#thermal-sensor-cells' in node
> > /soc/clock-controller@900000/thermal-sensor@900000 or bad phandle
> > (referred from thermal-sensors[0])
> > arch/arm/boot/dts/qcom-ipq8064.dtsi:112.19-130.5: Warning
> > (thermal_sensors_property): /thermal-zones/sensor3-thermal: Missing
> > property '#thermal-sensor-cells' in node
> > /soc/clock-controller@900000/thermal-sensor@900000 or bad phandle
> > (referred from thermal-sensors[0])
> > arch/arm/boot/dts/qcom-ipq8064.dtsi:132.19-150.5: Warning
> > (thermal_sensors_property): /thermal-zones/sensor4-thermal: Missing
> > property '#thermal-sensor-cells' in node
> > /soc/clock-controller@900000/thermal-sensor@900000 or bad phandle
> > (referred from thermal-sensors[0])
> > arch/arm/boot/dts/qcom-ipq8064.dtsi:152.19-170.5: Warning
> > (thermal_sensors_property): /thermal-zones/sensor5-thermal: Missing
> > property '#thermal-sensor-cells' in node
> > /soc/clock-controller@900000/thermal-sensor@900000 or bad phandle
> > (referred from thermal-sensors[0])
> > arch/arm/boot/dts/qcom-ipq8064.dtsi:172.19-190.5: Warning
> > (thermal_sensors_property): /thermal-zones/sensor6-thermal: Missing
> > property '#thermal-sensor-cells' in node
> > /soc/clock-controller@900000/thermal-sensor@900000 or bad phandle
> > (referred from thermal-sensors[0])
> > arch/arm/boot/dts/qcom-ipq8064.dtsi:192.19-210.5: Warning
> > (thermal_sensors_property): /thermal-zones/sensor7-thermal: Missing
> > property '#thermal-sensor-cells' in node
> > /soc/clock-controller@900000/thermal-sensor@900000 or bad phandle
> > (referred from thermal-sensors[0])
> > arch/arm/boot/dts/qcom-ipq8064.dtsi:212.19-230.5: Warning
> > (thermal_sensors_property): /thermal-zones/sensor8-thermal: Missing
> > property '#thermal-sensor-cells' in node
> > /soc/clock-controller@900000/thermal-sensor@900000 or bad phandle
> > (referred from thermal-sensors[0])
> > arch/arm/boot/dts/qcom-ipq8064.dtsi:232.19-250.5: Warning
> > (thermal_sensors_property): /thermal-zones/sensor9-thermal: Missing
> > property '#thermal-sensor-cells' in node
> > /soc/clock-controller@900000/thermal-sensor@900000 or bad phandle
> > (referred from thermal-sensors[0])
> > arch/arm/boot/dts/qcom-ipq8064.dtsi:252.20-270.5: Warning
> > (thermal_sensors_property): /thermal-zones/sensor10-thermal: Missing
> > property '#thermal-sensor-cells' in node
> > /soc/clock-controller@900000/thermal-sensor@900000 or bad phandle
> > (referred from thermal-sensors[0])
> > arch/arm/boot/dts/qcom-ipq8064.dtsi:52.19-70.5: Warning
> > (thermal_sensors_property): /thermal-zones/sensor0-thermal: Missing
> > property '#thermal-sensor-cells' in node
> > /soc/clock-controller@900000/thermal-sensor@900000 or bad phandle
> > (referred from thermal-sensors[0])
> > arch/arm/boot/dts/qcom-ipq8064.dtsi:72.19-90.5: Warning
> > (thermal_sensors_property): /thermal-zones/sensor1-thermal: Missing
> > property '#thermal-sensor-cells' in node
> > /soc/clock-controller@900000/thermal-sensor@900000 or bad phandle
> > (referred from thermal-sensors[0])
> > arch/arm/boot/dts/qcom-ipq8064.dtsi:92.19-110.5: Warning
> > (thermal_sensors_property): /thermal-zones/sensor2-thermal: Missing
> > property '#thermal-sensor-cells' in node
> > /soc/clock-controller@900000/thermal-sensor@900000 or bad phandle
> > (referred from thermal-sensors[0])
> > arch/arm/boot/dts/qcom-ipq8064.dtsi:112.19-130.5: Warning
> > (thermal_sensors_property): /thermal-zones/sensor3-thermal: Missing
> > property '#thermal-sensor-cells' in node
> > /soc/clock-controller@900000/thermal-sensor@900000 or bad phandle
> > (referred from thermal-sensors[0])
> > arch/arm/boot/dts/qcom-ipq8064.dtsi:132.19-150.5: Warning
> > (thermal_sensors_property): /thermal-zones/sensor4-thermal: Missing
> > property '#thermal-sensor-cells' in node
> > /soc/clock-controller@900000/thermal-sensor@900000 or bad phandle
> > (referred from thermal-sensors[0])
> > arch/arm/boot/dts/qcom-ipq8064.dtsi:152.19-170.5: Warning
> > (thermal_sensors_property): /thermal-zones/sensor5-thermal: Missing
> > property '#thermal-sensor-cells' in node
> > /soc/clock-controller@900000/thermal-sensor@900000 or bad phandle
> > (referred from thermal-sensors[0])
> > arch/arm/boot/dts/qcom-ipq8064.dtsi:172.19-190.5: Warning
> > (thermal_sensors_property): /thermal-zones/sensor6-thermal: Missing
> > property '#thermal-sensor-cells' in node
> > /soc/clock-controller@900000/thermal-sensor@900000 or bad phandle
> > (referred from thermal-sensors[0])
> > arch/arm/boot/dts/qcom-ipq8064.dtsi:192.19-210.5: Warning
> > (thermal_sensors_property): /thermal-zones/sensor7-thermal: Missing
> > property '#thermal-sensor-cells' in node
> > /soc/clock-controller@900000/thermal-sensor@900000 or bad phandle
> > (referred from thermal-sensors[0])
> > arch/arm/boot/dts/qcom-ipq8064.dtsi:212.19-230.5: Warning
> > (thermal_sensors_property): /thermal-zones/sensor8-thermal: Missing
> > property '#thermal-sensor-cells' in node
> > /soc/clock-controller@900000/thermal-sensor@900000 or bad phandle
> > (referred from thermal-sensors[0])
> > arch/arm/boot/dts/qcom-ipq8064.dtsi:232.19-250.5: Warning
> > (thermal_sensors_property): /thermal-zones/sensor9-thermal: Missing
> > property '#thermal-sensor-cells' in node
> > /soc/clock-controller@900000/thermal-sensor@900000 or bad phandle
> > (referred from thermal-sensors[0])
> > arch/arm/boot/dts/qcom-ipq8064.dtsi:252.20-270.5: Warning
> > (thermal_sensors_property): /thermal-zones/sensor10-thermal: Missing
> > property '#thermal-sensor-cells' in node
> > /soc/clock-controller@900000/thermal-sensor@900000 or bad phandle
> > (referred from thermal-sensors[0])
> >
> > Presumably introduced by commit
> >
> > 88542b1d37dc ("ARM: dts: qcom: fix thermal zones naming")
> >
> > --
> > Cheers,
> > Stephen Rothwell
>
>
next prev parent reply other threads:[~2021-10-25 2:24 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-10-24 23:28 linux-next: build warning after merge of the qcom tree Stephen Rothwell
2021-10-24 23:40 ` David Heidelberg
2021-10-25 2:24 ` Bjorn Andersson [this message]
-- strict thread matches above, loose matches on Subject: below --
2020-04-15 0:25 Stephen Rothwell
2020-04-15 4:51 ` Stephen Boyd
2020-04-15 5:04 ` Bjorn Andersson
2019-08-07 0:08 Stephen Rothwell
2018-11-15 23:10 Stephen Rothwell
2018-11-28 21:25 ` Stephen Rothwell
2018-11-29 16:30 ` Stephen Boyd
2018-11-30 4:13 ` Stephen Rothwell
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=YXYVZF7ARs3HSh9+@yoga \
--to=bjorn.andersson@linaro.org \
--cc=agross@kernel.org \
--cc=david@ixit.cz \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-next@vger.kernel.org \
--cc=sfr@canb.auug.org.au \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).