* Re: linux-next: tree build failure
From: Stephen Rothwell @ 2008-11-28 10:43 UTC (permalink / raw)
To: Takashi Iwai; +Cc: linux-next
In-Reply-To: <s5hljv4406l.wl%tiwai@suse.de>
[-- Attachment #1: Type: text/plain, Size: 405 bytes --]
Hi Takashi,
On Fri, 28 Nov 2008 11:25:22 +0100 Takashi Iwai <tiwai@suse.de> wrote:
>
> It was already fixed on sound.git tree in this morning.
> Pull again if possible.
On Monday ...
Thanks for fixing it. Please be a bit more careful about what gets put
into your for-next branch.
--
Cheers,
Stephen Rothwell sfr@canb.auug.org.au
http://www.canb.auug.org.au/~sfr/
[-- Attachment #2: Type: application/pgp-signature, Size: 197 bytes --]
^ permalink raw reply
* linux-next: Tree for November 28
From: Stephen Rothwell @ 2008-11-28 10:36 UTC (permalink / raw)
To: linux-next; +Cc: LKML
[-- Attachment #1: Type: text/plain, Size: 7204 bytes --]
Hi all,
Changes since 20081127:
Today's tree fails the powerpc allyesconfig build.
New tree:
trivial
Undropped trees:
Dropped trees (temporarily):
v4l-dvb (build problem)
kbuild (build problem)
semaphore-removal (due to unfixed conflicts against Linus' tree)
cpu_alloc (build problem)
perfmon3 (concerns from the x86 team)
The net tree lost its 3 conflicts and a merge fix, but gained a build
failure.
The firmware tree gained 2 conflicts against the net tree.
The sound tree gained a build failure.
----------------------------------------------------------------------------
I have created today's linux-next tree at
git://git.kernel.org/pub/scm/linux/kernel/git/sfr/linux-next.git
(patches at
http://www.kernel.org/pub/linux/kernel/people/sfr/linux-next/). If you
are tracking the linux-next tree using git, you should not use "git pull"
to do so as that will try to merge the new linux-next release with the
old one. You should use "git fetch" as mentioned in the FAQ on the wiki
(see below).
You can see which trees have been included by looking in the Next/Trees
file in the source. There are also quilt-import.log and merge.log files
in the Next directory. Between each merge, the tree was built with
a ppc64_defconfig for powerpc and an allmodconfig for x86_64. After the
final fixups (if any), it is also built with powerpc allnoconfig,
44x_defconfig and allyesconfig and i386, sparc and sparc64 defconfig.
Below is a summary of the state of the merge.
We are up to 127 trees (counting Linus' and 15 trees of patches pending for
Linus' tree), more are welcome (even if they are currently empty).
Thanks to those who have contributed, and to those who haven't, please do.
Status of my local build tests will be at
http://kisskb.ellerman.id.au/linux-next . If maintainers want to give
advice about cross compilers/configs that work, we are always open to add
more builds.
Thanks to Jan Dittmer for adding the linux-next tree to his build tests
at http://l4x.org/k/ , the guys at http://test.kernel.org/ and Randy
Dunlap for doing many randconfig builds.
There is a wiki covering stuff to do with linux-next at
http://linux.f-seidel.de/linux-next/pmwiki/ . Thanks to Frank Seidel.
--
Cheers,
Stephen Rothwell sfr@canb.auug.org.au
$ git checkout master
$ git reset --hard stable
Merging origin/master
Merging arm-current/master
Merging m68k-current/for-linus
Merging powerpc-merge/merge
Merging sparc-current/master
Merging scsi-rc-fixes/master
Merging net-current/master
Merging sound-current/for-linus
Merging pci-current/for-linus
Merging wireless-current/master
Merging kbuild-current/master
Merging quilt/driver-core.current
Merging quilt/usb.current
Merging cpufreq-current/fixes
Merging input-current/for-linus
Merging md-current/for-2.6.26
Merging dwmw2/master
Merging arm/devel
Merging avr32/avr32-arch
Merging blackfin/for-linus
Merging cris/for-next
Merging ia64/test
Merging m68k/for-next
Merging m68knommu/for-next
Merging mips/mips-for-linux-next
Merging parisc/master
Merging powerpc/next
Merging 4xx/next
CONFLICT (content): Merge conflict in arch/powerpc/configs/ppc44x_defconfig
Merging galak/next
Merging pxa/for-next
Merging s390/features
CONFLICT (content): Merge conflict in drivers/char/Makefile
Merging sh/master
Merging sparc/master
Merging x86/auto-x86-next
Merging xtensa/master
Merging quilt/driver-core
Merging quilt/usb
Merging tip-core/auto-core-next
Merging cpus4096/auto-cpus4096-next
Merging ftrace/auto-ftrace-next
CONFLICT (content): Merge conflict in scripts/recordmcount.pl
Merging genirq/auto-genirq-next
Merging safe-poison-pointers/auto-safe-poison-pointers-next
Merging sched/auto-sched-next
Merging stackprotector/auto-stackprotector-next
Merging timers/auto-timers-next
Merging pci/linux-next
Merging quilt/device-mapper
Merging hid/for-next
Merging quilt/i2c
Merging quilt/jdelvare-hwmon
Merging quilt/kernel-doc
Merging jfs/next
Merging quilt/ide
Merging libata/NEXT
Merging nfs/linux-next
Merging xfs/master
Merging infiniband/for-next
Merging acpi/test
Merging nfsd/nfsd-next
Merging ieee1394/for-next
Merging ubi/linux-next
Merging kvm/master
CONFLICT (content): Merge conflict in arch/x86/kernel/reboot.c
Merging dlm/next
Merging scsi/master
Merging ocfs2/linux-next
Merging ext4/next
Merging async_tx/next
Merging udf/for_next
Merging net/master
Applying net: async_tx merge fix
Applying net: decnet build fix
Merging mtd/master
CONFLICT (content): Merge conflict in drivers/mtd/maps/physmap.c
Merging wireless/master
Merging crypto/master
Merging vfs/for-next
Merging sound/for-next
Merging cpufreq/next
Merging v9fs/for-next
Merging quilt/rr
CONFLICT (content): Merge conflict in arch/x86/kernel/io_apic.c
CONFLICT (content): Merge conflict in arch/x86/kernel/setup.c
CONFLICT (content): Merge conflict in kernel/irq/manage.c
CONFLICT (content): Merge conflict in kernel/irq/proc.c
Merging cifs/master
Merging mmc/next
Merging gfs2/master
Merging input/next
Merging semaphore/semaphore
Merging bkl-removal/bkl-removal
Merging ubifs/linux-next
Merging lsm/for-next
Merging block/for-next
Merging embedded/master
Merging firmware/master
CONFLICT (content): Merge conflict in drivers/net/tg3.c
CONFLICT (content): Merge conflict in firmware/Makefile
CONFLICT (content): Merge conflict in firmware/WHENCE
Merging pcmcia/master
Merging battery/master
Merging leds/for-mm
Merging backlight/for-mm
Merging kgdb/kgdb-next
Merging slab/for-next
Merging uclinux/for-next
Merging md/for-next
Merging kmemcheck/auto-kmemcheck-next
CONFLICT (content): Merge conflict in MAINTAINERS
CONFLICT (content): Merge conflict in arch/x86/mm/Makefile
CONFLICT (content): Merge conflict in mm/slab.c
CONFLICT (content): Merge conflict in mm/slub.c
Merging generic-ipi/auto-generic-ipi-next
Merging mfd/for-next
Merging hdlc/hdlc-next
Merging drm/drm-next
Merging voltage/for-next
Merging security-testing/next
CONFLICT (content): Merge conflict in fs/nfsd/nfs4recover.c
CONFLICT (content): Merge conflict in fs/ocfs2/namei.c
CONFLICT (content): Merge conflict in fs/xfs/linux-2.6/xfs_cred.h
CONFLICT (content): Merge conflict in fs/xfs/linux-2.6/xfs_globals.h
CONFLICT (content): Merge conflict in fs/xfs/xfs_vnodeops.h
Merging lblnet/master
Merging quilt/ttydev
CONFLICT (content): Merge conflict in fs/devpts/inode.c
Merging agp/agp-next
Merging oprofile/auto-oprofile-next
Merging fastboot/auto-fastboot-next
Merging sparseirq/auto-sparseirq-next
Merging iommu/auto-iommu-next
Merging uwb/for-upstream
Merging watchdog/master
Merging proc/proc
CONFLICT (content): Merge conflict in fs/proc/base.c
CONFLICT (content): Merge conflict in kernel/exit.c
Merging bdev/master
Merging dwmw2-iommu/master
Merging cputime/cputime
CONFLICT (content): Merge conflict in kernel/sched.c
Merging osd/linux-next
Merging fatfs/master
Merging fuse/for-next
Merging trivial/for-next
Merging quilt/staging
Merging scsi-post-merge/master
Created commit 16b3b1d: Revert "ALSA: hda - Move power_save option to hda_intel.c"
[-- Attachment #2: Type: application/pgp-signature, Size: 197 bytes --]
^ permalink raw reply
* [PATCH -next] at91rm9200 vs cpumask changes
From: Alexey Dobriyan @ 2008-11-28 10:39 UTC (permalink / raw)
To: sfr; +Cc: linux-kernel, linux-next, rusty
--- a/arch/arm/mach-at91/at91rm9200_time.c
+++ b/arch/arm/mach-at91/at91rm9200_time.c
@@ -169,7 +169,6 @@ static struct clock_event_device clkevt = {
.features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT,
.shift = 32,
.rating = 150,
- .cpumask = CPU_MASK_CPU0,
.set_next_event = clkevt32k_next_event,
.set_mode = clkevt32k_mode,
};
@@ -197,7 +196,7 @@ void __init at91rm9200_timer_init(void)
clkevt.mult = div_sc(AT91_SLOW_CLOCK, NSEC_PER_SEC, clkevt.shift);
clkevt.max_delta_ns = clockevent_delta2ns(AT91_ST_ALMV, &clkevt);
clkevt.min_delta_ns = clockevent_delta2ns(2, &clkevt) + 1;
- clkevt.cpumask = cpumask_of_cpu(0);
+ clkevt.cpumask = cpumask_of(0);
clockevents_register_device(&clkevt);
/* register clocksource */
^ permalink raw reply
* Re: [PATCH] fix build: add missing #ifdef CONFIG_STACKTRACE
From: Ingo Molnar @ 2008-11-28 10:34 UTC (permalink / raw)
To: Török Edwin; +Cc: adobriyan, sfr, linux-next, linux-kernel
In-Reply-To: <1227863876-22747-1-git-send-email-edwintorok@gmail.com>
* Török Edwin <edwintorok@gmail.com> wrote:
>
> Signed-off-by: Török Edwin <edwintorok@gmail.com>
> ---
> kernel/trace/trace.c | 2 ++
> 1 files changed, 2 insertions(+), 0 deletions(-)
applied to tip/tracing/stack-tracer, and pushed out into ftrace-next, thanks
Edwin!
Ingo
^ permalink raw reply
* Re: linux-next: tree build failure
From: Takashi Iwai @ 2008-11-28 10:25 UTC (permalink / raw)
To: Stephen Rothwell; +Cc: linux-next
In-Reply-To: <20081128210412.a7df2494.sfr@canb.auug.org.au>
At Fri, 28 Nov 2008 21:04:12 +1100,
Stephen Rothwell wrote:
>
> Hi Takashi,
>
> Today's linux-next build (i386 defconfig) failed like this:
>
> sound/pci/hda/hda_intel.c: In function 'azx_codec_create':
> sound/pci/hda/hda_intel.c:1236: error: 'power_save' undeclared (first use in this function)
>
> Caused by commit fee2fba3586f78762ecc5f432dfd3602765a31b3 ("ALSA: hda -
> Move power_save option to hda_intel.c").
>
> I have reverted that commit. It needs to be fixed soon.
It was already fixed on sound.git tree in this morning.
Pull again if possible.
thanks,
Takashi
^ permalink raw reply
* Re: linux-next: proc tree build failure
From: David Miller @ 2008-11-28 10:25 UTC (permalink / raw)
To: adobriyan; +Cc: sfr, linux-next, kenchen, mingo
In-Reply-To: <20081128.010025.224611672.davem@davemloft.net>
From: David Miller <davem@davemloft.net>
Date: Fri, 28 Nov 2008 01:00:25 -0800 (PST)
> From: Alexey Dobriyan <adobriyan@gmail.com>
> Date: Fri, 28 Nov 2008 11:05:55 +0300
>
> > David, can you implement save_stack_trace_tsk() for sparc64? I have
> > no idea how to do it or is it doable at all.
>
> Sure thing Alexey.
I just pushed the following patch into sparc-next-2.6, so it
should show up in the next tree that Stephen builds:
sparc64: Add save_stack_trace_tsk().
And this allows us to indicate HAVE_LATENCYTOP_SUPPORT.
Signed-off-by: David S. Miller <davem@davemloft.net>
---
arch/sparc/Kconfig | 4 ++++
arch/sparc64/kernel/stacktrace.c | 32 +++++++++++++++++++++++---------
2 files changed, 27 insertions(+), 9 deletions(-)
diff --git a/arch/sparc/Kconfig b/arch/sparc/Kconfig
index 10945c3..e162535 100644
--- a/arch/sparc/Kconfig
+++ b/arch/sparc/Kconfig
@@ -72,6 +72,10 @@ config LOCKDEP_SUPPORT
bool
default y if SPARC64
+config HAVE_LATENCYTOP_SUPPORT
+ bool
+ default y if SPARC64
+
config AUDIT_ARCH
bool
default y if SPARC64
diff --git a/arch/sparc64/kernel/stacktrace.c b/arch/sparc64/kernel/stacktrace.c
index 4e21d4a..acb12f6 100644
--- a/arch/sparc64/kernel/stacktrace.c
+++ b/arch/sparc64/kernel/stacktrace.c
@@ -7,17 +7,18 @@
#include "kstack.h"
-void save_stack_trace(struct stack_trace *trace)
+static void __save_stack_trace(struct thread_info *tp,
+ struct stack_trace *trace,
+ bool skip_sched)
{
- struct thread_info *tp = task_thread_info(current);
unsigned long ksp, fp;
- stack_trace_flush();
-
- __asm__ __volatile__(
- "mov %%fp, %0"
- : "=r" (ksp)
- );
+ if (tp == current_thread_info()) {
+ stack_trace_flush();
+ __asm__ __volatile__("mov %%fp, %0" : "=r" (ksp));
+ } else {
+ ksp = tp->ksp;
+ }
fp = ksp + STACK_BIAS;
do {
@@ -43,8 +44,21 @@ void save_stack_trace(struct stack_trace *trace)
if (trace->skip > 0)
trace->skip--;
- else
+ else if (!skip_sched || !in_sched_functions(pc))
trace->entries[trace->nr_entries++] = pc;
} while (trace->nr_entries < trace->max_entries);
}
+
+void save_stack_trace(struct stack_trace *trace)
+{
+ __save_stack_trace(current_thread_info(), trace, false);
+}
EXPORT_SYMBOL_GPL(save_stack_trace);
+
+void save_stack_trace_tsk(struct task_struct *tsk, struct stack_trace *trace)
+{
+ struct thread_info *tp = task_thread_info(tsk);
+
+ __save_stack_trace(tp, trace, true);
+}
+EXPORT_SYMBOL_GPL(save_stack_trace_tsk);
--
1.5.6.5
^ permalink raw reply related
* linux-next: tree build failure
From: Stephen Rothwell @ 2008-11-28 10:04 UTC (permalink / raw)
To: Takashi Iwai; +Cc: linux-next
[-- Attachment #1: Type: text/plain, Size: 515 bytes --]
Hi Takashi,
Today's linux-next build (i386 defconfig) failed like this:
sound/pci/hda/hda_intel.c: In function 'azx_codec_create':
sound/pci/hda/hda_intel.c:1236: error: 'power_save' undeclared (first use in this function)
Caused by commit fee2fba3586f78762ecc5f432dfd3602765a31b3 ("ALSA: hda -
Move power_save option to hda_intel.c").
I have reverted that commit. It needs to be fixed soon.
--
Cheers,
Stephen Rothwell sfr@canb.auug.org.au
http://www.canb.auug.org.au/~sfr/
[-- Attachment #2: Type: application/pgp-signature, Size: 197 bytes --]
^ permalink raw reply
* [PATCH] fix build: add missing #ifdef CONFIG_STACKTRACE
From: Török Edwin @ 2008-11-28 9:17 UTC (permalink / raw)
To: adobriyan; +Cc: sfr, linux-next, mingo, linux-kernel, Török Edwin
In-Reply-To: <c62985530811280114s50abe288q255a185b6d64c81b@mail.gmail.com>
Signed-off-by: Török Edwin <edwintorok@gmail.com>
---
kernel/trace/trace.c | 2 ++
1 files changed, 2 insertions(+), 0 deletions(-)
diff --git a/kernel/trace/trace.c b/kernel/trace/trace.c
index 5811e0a..91887a2 100644
--- a/kernel/trace/trace.c
+++ b/kernel/trace/trace.c
@@ -983,6 +983,7 @@ static void ftrace_trace_userstack(struct trace_array *tr,
struct trace_array_cpu *data,
unsigned long flags, int pc)
{
+#ifdef CONFIG_STACKTRACE
struct ring_buffer_event *event;
struct userstack_entry *entry;
struct stack_trace trace;
@@ -1008,6 +1009,7 @@ static void ftrace_trace_userstack(struct trace_array *tr,
save_stack_trace_user(&trace);
ring_buffer_unlock_commit(tr->buffer, event, irq_flags);
+#endif
}
void __trace_userstack(struct trace_array *tr,
--
1.5.6.5
^ permalink raw reply related
* Re: next-2008-11-27: tracing on alpha (again)
From: Frédéric Weisbecker @ 2008-11-28 9:14 UTC (permalink / raw)
To: Alexey Dobriyan; +Cc: sfr, linux-next, mingo, edwintorok, linux-kernel
In-Reply-To: <20081128090258.GA27346@x200.localdomain>
2008/11/28 Alexey Dobriyan <adobriyan@gmail.com>:
> On alpha-smp-n-debug-y:
>
> CC kernel/trace/trace.o
> kernel/trace/trace.c: In function 'ftrace_trace_userstack':
> kernel/trace/trace.c:968: error: storage size of 'trace' isn't known
> kernel/trace/trace.c:968: warning: unused variable 'trace'
> make[3]: *** [kernel/trace/trace.o] Error 1
I think it needs a missing #ifdef CONFIG_STACKTRACE inside
ftrace_trace_userstack.
> CC kernel/trace/trace_branch.o
> kernel/trace/trace_branch.c: In function 'probe_likely_condition':
> kernel/trace/trace_branch.c:44: error: implicit declaration of function 'raw_local_irq_save'
> kernel/trace/trace_branch.c:76: error: implicit declaration of function 'raw_local_irq_restore'
>
Needs a missing #include <linux/irqflags.h>
I don't have time to submit patches now. Probably this night....
^ permalink raw reply
* Re: linux-next: proc tree build failure
From: David Miller @ 2008-11-28 9:00 UTC (permalink / raw)
To: adobriyan; +Cc: sfr, linux-next, kenchen, mingo
In-Reply-To: <20081128080555.GC3495@x200.localdomain>
From: Alexey Dobriyan <adobriyan@gmail.com>
Date: Fri, 28 Nov 2008 11:05:55 +0300
> David, can you implement save_stack_trace_tsk() for sparc64? I have
> no idea how to do it or is it doable at all.
Sure thing Alexey.
^ permalink raw reply
* next-2008-11-27: tracing on alpha (again)
From: Alexey Dobriyan @ 2008-11-28 9:02 UTC (permalink / raw)
To: sfr; +Cc: linux-next, fweisbec, mingo, edwintorok, linux-kernel
On alpha-smp-n-debug-y:
CC kernel/trace/trace.o
kernel/trace/trace.c: In function 'ftrace_trace_userstack':
kernel/trace/trace.c:968: error: storage size of 'trace' isn't known
kernel/trace/trace.c:968: warning: unused variable 'trace'
make[3]: *** [kernel/trace/trace.o] Error 1
CC kernel/trace/trace_branch.o
kernel/trace/trace_branch.c: In function 'probe_likely_condition':
kernel/trace/trace_branch.c:44: error: implicit declaration of function 'raw_local_irq_save'
kernel/trace/trace_branch.c:76: error: implicit declaration of function 'raw_local_irq_restore'
^ permalink raw reply
* RE: [ipw3945-devel] next-20081125: call trace for iwlagn (rfkill switch on)
From: Zheng, Jeff @ 2008-11-28 8:06 UTC (permalink / raw)
To: Nico -telmich- Schottelius, Luo, Ximin
Cc: linux-next@vger.kernel.org, ipw3945-devel@lists.sourceforge.net
In-Reply-To: <20081128075308.GE5413@denkbrett.schottelius.org>
No. Ximin and I test iwlwifi driver.
I think the latest iwlwifi develope tree is at http://git.kernel.org/?p=linux/kernel/git/iwlwifi/iwlwifi-2.6.git.
Bests
Jeff
-----Original Message-----
From: Nico -telmich- Schottelius [mailto:nico-linux-ipw3945-devel@schottelius.org]
Sent: 2008年11月28日 15:53
To: Luo, Ximin
Cc: linux-next@vger.kernel.org; ipw3945-devel@lists.sourceforge.net
Subject: Re: [ipw3945-devel] next-20081125: call trace for iwlagn (rfkill switch on)
Luo, Ximin [Fri, Nov 28, 2008 at 03:03:23PM +0800]:
> Maybe you can the download the latest driver which had fixed this issue.
> You can get the information from http://www.intellinuxwireless.org/bugzilla/show_bug.cgi?id=1800
You are not (yet?) preparing a git repo for inclusion into linux-next, do you?
I just found http://www.intellinuxwireless.org/repos/mac80211.git and
http://www.intellinuxwireless.org/repos/iwlwifi.git
Do I (still) need both repos? Is running "make patch_kernel" for mac802.11
still up-to-date for patching linux-next based?
Sincerly,
Nico
^ permalink raw reply
* Re: linux-next: proc tree build failure
From: Alexey Dobriyan @ 2008-11-28 8:05 UTC (permalink / raw)
To: Stephen Rothwell, David S. Miller; +Cc: linux-next, Ken Chen, Ingo Molnar
In-Reply-To: <20081124181559.3896a756.sfr@canb.auug.org.au>
On Mon, Nov 24, 2008 at 06:15:59PM +1100, Stephen Rothwell wrote:
> Today's linux-next build (sparc64 allmodconfig) failed like this:
>
> fs/proc/base.c:362: undefined reference to `save_stack_trace_tsk'
>
> It has been failing like this for some time.
>
> Caused by commit 788ff43b53179f3af8677d59c87104aff1f75bde ("proc:
> add /proc/*/stack") which has been fixed up for MIPS, but needs another
> fix for Sparc.
David, can you implement save_stack_trace_tsk() for sparc64? I have no idea
how to do it or is it doable at all.
^ permalink raw reply
* Re: [ipw3945-devel] next-20081125: call trace for iwlagn (rfkill switch on)
From: Nico -telmich- Schottelius @ 2008-11-28 7:53 UTC (permalink / raw)
To: Luo, Ximin
Cc: ipw3945-devel@lists.sourceforge.net, linux-next@vger.kernel.org
In-Reply-To: <AFAB8585072C7E48BC5C6F9C87F9B7970214D75A@pdsmsx502.ccr.corp.intel.com>
[-- Attachment #1: Type: text/plain, Size: 570 bytes --]
Luo, Ximin [Fri, Nov 28, 2008 at 03:03:23PM +0800]:
> Maybe you can the download the latest driver which had fixed this issue.
> You can get the information from http://www.intellinuxwireless.org/bugzilla/show_bug.cgi?id=1800
You are not (yet?) preparing a git repo for inclusion into linux-next, do you?
I just found http://www.intellinuxwireless.org/repos/mac80211.git and
http://www.intellinuxwireless.org/repos/iwlwifi.git
Do I (still) need both repos? Is running "make patch_kernel" for mac802.11
still up-to-date for patching linux-next based?
Sincerly,
Nico
[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 197 bytes --]
^ permalink raw reply
* Re: linux-next: net tree build failure
From: David Miller @ 2008-11-28 7:07 UTC (permalink / raw)
To: sfr; +Cc: linux-next, harvey.harrison, swhiteho
In-Reply-To: <20081128144659.faae356d.sfr@canb.auug.org.au>
From: Stephen Rothwell <sfr@canb.auug.org.au>
Date: Fri, 28 Nov 2008 14:46:59 +1100
> I will fix this one for you ... condsider it a late birthday present. :-)
You're too kind :) net-next-2.6 has this fix in it now too.
^ permalink raw reply
* RE: [ipw3945-devel] next-20081125: call trace for iwlagn (rfkill switch on)
From: Luo, Ximin @ 2008-11-28 7:03 UTC (permalink / raw)
To: Nico -telmich- Schottelius, ipw3945-devel@lists.sourceforge.net
Cc: linux-next@vger.kernel.org
In-Reply-To: <20081128063859.GB4700@denkbrett.schottelius.org>
Maybe you can the download the latest driver which had fixed this issue.
You can get the information from http://www.intellinuxwireless.org/bugzilla/show_bug.cgi?id=1800
Best Regards,
Ximin
-----Original Message-----
From: Nico -telmich- Schottelius [mailto:nico-linux-ipw3945-devel@schottelius.org]
Sent: 2008年11月28日 14:39
To: ipw3945-devel@lists.sourceforge.net
Cc: linux-next@vger.kernel.org
Subject: [ipw3945-devel] next-20081125: call trace for iwlagn (rfkill switch on)
Hello!
After a fresh reboot and enabled rfkill switch (-> radio turned off!),
I get the following call trace:
[ 89.169572] iwlagn 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 89.169791] iwlagn 0000:03:00.0: restoring config space at offset 0x1 (was 0x100102, writing 0x100106)
[ 89.169898] iwlagn 0000:03:00.0: irq 314 for MSI/MSI-X
[ 89.169980] iwlagn 0000:03:00.0: firmware: requesting iwlwifi-5000-1.ucode
[ 89.370030] iwlagn: Radio disabled by HW RF Kill switch
[ 89.381023] ------------[ cut here ]------------
[ 89.381215] WARNING: at net/mac80211/main.c:227 ieee80211_hw_config+0x71/0x79 [mac80211]()
[ 89.381455] Modules linked in: rfcomm l2cap bluetooth uinput autofs4 ipv6 cpufreq_powersave md_mod loop sha256_generic ansi_cprng krng chainiv rng aes_x86_64 aes_generic cbc dm_crypt dm_mod arc4 ecb cryptomgr aead crypto_blkcipher crypto_hash snd_hda_intel snd_pcm snd_page_alloc iwlagn snd_hwdep iwlcore thinkpad_acpi snd_seq snd_timer snd_seq_device rfkill snd hwmon mac80211 video wmi rtc_cmos rtc_core i2c_i801 backlight led_class e1000e output soundcore rtc_lib intel_agp uhci_hcd ehci_hcd i2c_core cfg80211 nvram usbcore pcspkr
[ 89.384858] Pid: 3923, comm: NetworkManager Not tainted 2.6.28-rc6-next-20081125-denkbrett #15
[ 89.385074] Call Trace:
[ 89.385229] [<ffffffff80232991>] warn_on_slowpath+0x51/0x75
[ 89.385367] [<ffffffff8043ac40>] qdisc_create_dflt+0x34/0x4a
[ 89.385514] [<ffffffffa015128b>] iwl_mac_config+0x219/0x237 [iwlagn]
[ 89.385667] [<ffffffffa00ca76e>] ieee80211_hw_config+0x71/0x79 [mac80211]
[ 89.385823] [<ffffffffa00d5925>] ieee80211_open+0x5b5/0x6d1 [mac80211]
[ 89.385962] [<ffffffff80442d71>] __nla_reserve+0x1e/0x46
[ 89.386097] [<ffffffff8042ba85>] dev_open+0x75/0xb2
[ 89.386230] [<ffffffff8042b451>] dev_change_flags+0xaf/0x16d
[ 89.386365] [<ffffffff80432c67>] do_setlink+0x2c4/0x391
[ 89.386500] [<ffffffff80433ba2>] rtnetlink_rcv_msg+0x0/0x1eb
[ 89.386634] [<ffffffff80432eca>] rtnl_setlink+0x10b/0x10d
[ 89.386769] [<ffffffff80433ba2>] rtnetlink_rcv_msg+0x0/0x1eb
[ 89.386904] [<ffffffff80442bd0>] netlink_rcv_skb+0x34/0x7c
[ 89.387038] [<ffffffff80433b9c>] rtnetlink_rcv+0x1f/0x25
[ 89.387173] [<ffffffff804426bc>] netlink_unicast+0x203/0x274
[ 89.387308] [<ffffffff804254f0>] __alloc_skb+0x61/0x123
[ 89.387445] [<ffffffff804429a9>] netlink_sendmsg+0x27c/0x28f
[ 89.387600] [<ffffffff80484616>] unix_stream_recvmsg+0x4ef/0x605
[ 89.387737] [<ffffffff8041eb2f>] sock_sendmsg+0xe2/0xff
[ 89.387873] [<ffffffff80244e00>] autoremove_wake_function+0x0/0x2e
[ 89.388038] [<ffffffff8041dc54>] move_addr_to_kernel+0x25/0x36
[ 89.388174] [<ffffffff8041ed63>] sys_sendmsg+0x217/0x28a
[ 89.388308] [<ffffffff80228fbf>] __wake_up+0x30/0x44
[ 89.388442] [<ffffffff80441a50>] netlink_insert+0xfe/0x121
[ 89.388577] [<ffffffff8041f759>] move_addr_to_user+0x41/0x58
[ 89.388712] [<ffffffff8041fc15>] sys_getsockname+0x7a/0xaa
[ 89.388847] [<ffffffff8020b53b>] system_call_fastpath+0x16/0x1b
[ 89.388981] ---[ end trace de9da4130e9bcfbf ]---
[ 89.390488] ADDRCONF(NETDEV_UP): wlan0: link is not ready
Any fixes available?
Sincerly,
Nico
--
Think about Free and Open Source Software (FOSS).
http://nico.schottelius.org/documentations/foss/the-term-foss/
PGP: BFE4 C736 ABE5 406F 8F42 F7CF B8BE F92A 9885 188C
^ permalink raw reply
* next-20081125: call trace for iwlagn (rfkill switch on)
From: Nico -telmich- Schottelius @ 2008-11-28 6:38 UTC (permalink / raw)
To: ipw3945-devel; +Cc: linux-next
[-- Attachment #1.1: Type: text/plain, Size: 3430 bytes --]
Hello!
After a fresh reboot and enabled rfkill switch (-> radio turned off!),
I get the following call trace:
[ 89.169572] iwlagn 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 89.169791] iwlagn 0000:03:00.0: restoring config space at offset 0x1 (was 0x100102, writing 0x100106)
[ 89.169898] iwlagn 0000:03:00.0: irq 314 for MSI/MSI-X
[ 89.169980] iwlagn 0000:03:00.0: firmware: requesting iwlwifi-5000-1.ucode
[ 89.370030] iwlagn: Radio disabled by HW RF Kill switch
[ 89.381023] ------------[ cut here ]------------
[ 89.381215] WARNING: at net/mac80211/main.c:227 ieee80211_hw_config+0x71/0x79 [mac80211]()
[ 89.381455] Modules linked in: rfcomm l2cap bluetooth uinput autofs4 ipv6 cpufreq_powersave md_mod loop sha256_generic ansi_cprng krng chainiv rng aes_x86_64 aes_generic cbc dm_crypt dm_mod arc4 ecb cryptomgr aead crypto_blkcipher crypto_hash snd_hda_intel snd_pcm snd_page_alloc iwlagn snd_hwdep iwlcore thinkpad_acpi snd_seq snd_timer snd_seq_device rfkill snd hwmon mac80211 video wmi rtc_cmos rtc_core i2c_i801 backlight led_class e1000e output soundcore rtc_lib intel_agp uhci_hcd ehci_hcd i2c_core cfg80211 nvram usbcore pcspkr
[ 89.384858] Pid: 3923, comm: NetworkManager Not tainted 2.6.28-rc6-next-20081125-denkbrett #15
[ 89.385074] Call Trace:
[ 89.385229] [<ffffffff80232991>] warn_on_slowpath+0x51/0x75
[ 89.385367] [<ffffffff8043ac40>] qdisc_create_dflt+0x34/0x4a
[ 89.385514] [<ffffffffa015128b>] iwl_mac_config+0x219/0x237 [iwlagn]
[ 89.385667] [<ffffffffa00ca76e>] ieee80211_hw_config+0x71/0x79 [mac80211]
[ 89.385823] [<ffffffffa00d5925>] ieee80211_open+0x5b5/0x6d1 [mac80211]
[ 89.385962] [<ffffffff80442d71>] __nla_reserve+0x1e/0x46
[ 89.386097] [<ffffffff8042ba85>] dev_open+0x75/0xb2
[ 89.386230] [<ffffffff8042b451>] dev_change_flags+0xaf/0x16d
[ 89.386365] [<ffffffff80432c67>] do_setlink+0x2c4/0x391
[ 89.386500] [<ffffffff80433ba2>] rtnetlink_rcv_msg+0x0/0x1eb
[ 89.386634] [<ffffffff80432eca>] rtnl_setlink+0x10b/0x10d
[ 89.386769] [<ffffffff80433ba2>] rtnetlink_rcv_msg+0x0/0x1eb
[ 89.386904] [<ffffffff80442bd0>] netlink_rcv_skb+0x34/0x7c
[ 89.387038] [<ffffffff80433b9c>] rtnetlink_rcv+0x1f/0x25
[ 89.387173] [<ffffffff804426bc>] netlink_unicast+0x203/0x274
[ 89.387308] [<ffffffff804254f0>] __alloc_skb+0x61/0x123
[ 89.387445] [<ffffffff804429a9>] netlink_sendmsg+0x27c/0x28f
[ 89.387600] [<ffffffff80484616>] unix_stream_recvmsg+0x4ef/0x605
[ 89.387737] [<ffffffff8041eb2f>] sock_sendmsg+0xe2/0xff
[ 89.387873] [<ffffffff80244e00>] autoremove_wake_function+0x0/0x2e
[ 89.388038] [<ffffffff8041dc54>] move_addr_to_kernel+0x25/0x36
[ 89.388174] [<ffffffff8041ed63>] sys_sendmsg+0x217/0x28a
[ 89.388308] [<ffffffff80228fbf>] __wake_up+0x30/0x44
[ 89.388442] [<ffffffff80441a50>] netlink_insert+0xfe/0x121
[ 89.388577] [<ffffffff8041f759>] move_addr_to_user+0x41/0x58
[ 89.388712] [<ffffffff8041fc15>] sys_getsockname+0x7a/0xaa
[ 89.388847] [<ffffffff8020b53b>] system_call_fastpath+0x16/0x1b
[ 89.388981] ---[ end trace de9da4130e9bcfbf ]---
[ 89.390488] ADDRCONF(NETDEV_UP): wlan0: link is not ready
Any fixes available?
Sincerly,
Nico
--
Think about Free and Open Source Software (FOSS).
http://nico.schottelius.org/documentations/foss/the-term-foss/
PGP: BFE4 C736 ABE5 406F 8F42 F7CF B8BE F92A 9885 188C
[-- Attachment #1.2: Digital signature --]
[-- Type: application/pgp-signature, Size: 197 bytes --]
[-- Attachment #2: Type: text/plain, Size: 363 bytes --]
-------------------------------------------------------------------------
This SF.Net email is sponsored by the Moblin Your Move Developer's challenge
Build the coolest Linux based applications with Moblin SDK & win great prizes
Grand prize is a trip for two to an Open Source event anywhere in the world
http://moblin-contest.org/redirect.php?banner_id=100&url=/
[-- Attachment #3: Type: text/plain, Size: 170 bytes --]
_______________________________________________
Ipw3945-devel mailing list
Ipw3945-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/ipw3945-devel
^ permalink raw reply
* next-20081125: crypto hard disk gets unaccessable
From: Nico -telmich- Schottelius @ 2008-11-28 6:33 UTC (permalink / raw)
To: linux-next; +Cc: LKML
[-- Attachment #1.1: Type: text/plain, Size: 700 bytes --]
Hello!
After about four suspend & resume operations in the midst of editing
a file, the system beeped twice and issued this error:
[69186.618730] note: kcryptd[2848] exited with preempt_count 2
[full call trace attached]
/dev/sda3 was mapped via cryptsetup luksOpen to /dev/mapper/home
and also mounted an home.
After that error, all accesses to /home hung. Access to /
(provided by sda1) were still working.
System is again the Lenovo X200, including sierra loaded and used.
Sincerly,
Nico
--
Think about Free and Open Source Software (FOSS).
http://nico.schottelius.org/documentations/foss/the-term-foss/
PGP: BFE4 C736 ABE5 406F 8F42 F7CF B8BE F92A 9885 188C
[-- Attachment #1.2: calltrace-2.6.28-next-20081125 --]
[-- Type: text/plain, Size: 140321 bytes --]
[ 0.000000] BIOS EBDA/lowmem at: 0009ec00/0009ec00
[ 0.000000] Linux version 2.6.28-rc6-next-20081125-denkbrett (compiler@ikn) (gcc version 4.3.2 (Debian 4.3.2-1) ) #15 SMP PREEMPT Tue Nov 25 13:41:17 CET 2008
[ 0.000000] Command line: root=/dev/sda1 ro
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Centaur CentaurHauls
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009ec00 (usable)
[ 0.000000] BIOS-e820: 000000000009ec00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000007c4a1000 (usable)
[ 0.000000] BIOS-e820: 000000007c4a1000 - 000000007c4a7000 (reserved)
[ 0.000000] BIOS-e820: 000000007c4a7000 - 000000007c5b7000 (usable)
[ 0.000000] BIOS-e820: 000000007c5b7000 - 000000007c60f000 (reserved)
[ 0.000000] BIOS-e820: 000000007c60f000 - 000000007c6c6000 (usable)
[ 0.000000] BIOS-e820: 000000007c6c6000 - 000000007c6d1000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000007c6d1000 - 000000007c6d4000 (ACPI data)
[ 0.000000] BIOS-e820: 000000007c6d4000 - 000000007c6d8000 (reserved)
[ 0.000000] BIOS-e820: 000000007c6d8000 - 000000007c6dc000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000007c6dc000 - 000000007c6df000 (reserved)
[ 0.000000] BIOS-e820: 000000007c6df000 - 000000007c706000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000007c706000 - 000000007c708000 (ACPI data)
[ 0.000000] BIOS-e820: 000000007c708000 - 000000007c90f000 (reserved)
[ 0.000000] BIOS-e820: 000000007c90f000 - 000000007c99f000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000007c99f000 - 000000007c9ff000 (ACPI data)
[ 0.000000] BIOS-e820: 000000007c9ff000 - 000000007ca00000 (usable)
[ 0.000000] BIOS-e820: 000000007cc00000 - 000000007f000000 (reserved)
[ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved)
[ 0.000000] BIOS-e820: 00000000fed10000 - 00000000fed14000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed18000 - 00000000fed1a000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000ff800000 - 0000000100000000 (reserved)
[ 0.000000] DMI present.
[ 0.000000] last_pfn = 0x7ca00 max_arch_pfn = 0x3ffffffff
[ 0.000000] init_memory_mapping: 0000000000000000-000000007ca00000
[ 0.000000] 0000000000 - 007ca00000 page 2M
[ 0.000000] kernel direct mapping tables up to 7ca00000 @ 8000-b000
[ 0.000000] last_map_addr: 7ca00000 end: 7ca00000
[ 0.000000] ACPI: RSDP 000F73A0, 0024 (r2 LENOVO)
[ 0.000000] ACPI: XSDT 7C97BD45, 009C (r1 LENOVO TP-6D 1050 LTP 0)
[ 0.000000] ACPI: FACP 7C97BF00, 00F4 (r3 LENOVO TP-6D 1050 LNVO 1)
[ 0.000000] ACPI: DSDT 7C97C2F4, D910 (r1 LENOVO TP-6D 1050 MSFT 3000000)
[ 0.000000] ACPI: FACS 7C98E000, 0040
[ 0.000000] ACPI: SSDT 7C97C0B4, 0240 (r1 LENOVO TP-6D 1050 MSFT 3000000)
[ 0.000000] ACPI: ECDT 7C989C04, 0052 (r1 LENOVO TP-6D 1050 LNVO 1)
[ 0.000000] ACPI: APIC 7C989C56, 0078 (r1 LENOVO TP-6D 1050 LNVO 1)
[ 0.000000] ACPI: MCFG 7C989CCE, 003C (r1 LENOVO TP-6D 1050 LNVO 1)
[ 0.000000] ACPI: HPET 7C989D0A, 0038 (r1 LENOVO TP-6D 1050 LNVO 1)
[ 0.000000] ACPI: SLIC 7C989DC2, 0176 (r1 LENOVO TP-6D 1050 LTP 0)
[ 0.000000] ACPI: BOOT 7C989F38, 0028 (r1 LENOVO TP-6D 1050 LTP 1)
[ 0.000000] ACPI: ASF! 7C989F60, 00A0 (r16 LENOVO TP-6D 1050 PTL 1)
[ 0.000000] ACPI: SSDT 7C98D203, 055F (r1 LENOVO TP-6D 1050 INTL 20050513)
[ 0.000000] ACPI: TCPA 7C707000, 0032 (r0 0 0)
[ 0.000000] ACPI: DMAR 7C706000, 0120 (r1 \x01 1 0)
[ 0.000000] ACPI: SSDT 7C6D3000, 0655 (r1 PmRef CpuPm 3000 INTL 20050624)
[ 0.000000] ACPI: SSDT 7C6D2000, 0274 (r1 PmRef Cpu0Tst 3000 INTL 20050624)
[ 0.000000] ACPI: SSDT 7C6D1000, 0242 (r1 PmRef ApTst 3000 INTL 20050624)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] (5 early reservations) ==> bootmem [0000000000 - 007ca00000]
[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
[ 0.000000] #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000]
[ 0.000000] #2 [0000200000 - 00006cc60c] TEXT DATA BSS ==> [0000200000 - 00006cc60c]
[ 0.000000] #3 [000009ec00 - 0000100000] BIOS reserved ==> [000009ec00 - 0000100000]
[ 0.000000] #4 [0000008000 - 0000009000] PGTABLE ==> [0000008000 - 0000009000]
[ 0.000000] found SMP MP-table at [ffff8800000f73e0] 000f73e0
[ 0.000000] [ffffe20000000000-ffffe20001bfffff] PMD -> [ffff880001200000-ffff880002dfffff] on node 0
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000000 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal 0x00100000 -> 0x00100000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[5] active PFN ranges
[ 0.000000] 0: 0x00000000 -> 0x0000009e
[ 0.000000] 0: 0x00000100 -> 0x0007c4a1
[ 0.000000] 0: 0x0007c4a7 -> 0x0007c5b7
[ 0.000000] 0: 0x0007c60f -> 0x0007c6c6
[ 0.000000] 0: 0x0007c9ff -> 0x0007ca00
[ 0.000000] On node 0 totalpages: 509447
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 1331 pages reserved
[ 0.000000] DMA zone: 2611 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 6923 pages used for memmap
[ 0.000000] DMA32 zone: 498526 pages, LIFO batch:31
[ 0.000000] Normal zone: 0 pages used for memmap
[ 0.000000] Movable zone: 0 pages used for memmap
[ 0.000000] ACPI: PM-Timer IO Port: 0x1008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] disabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 1, version 0, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
[ 0.000000] Allocating PCI resources starting at 80000000 (gap: 7f000000:61000000)
[ 0.000000] PERCPU: Allocating 49152 bytes of per cpu data
[ 0.000000] NR_CPUS: 2, nr_cpu_ids: 2, nr_node_ids 1
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 501137
[ 0.000000] Kernel command line: root=/dev/sda1 ro
[ 0.000000] Initializing CPU#0
[ 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes)
[ 0.000000] Extended CMOS year: 2000
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 2260.866 MHz processor.
[ 0.004000] Console: colour VGA+ 80x25
[ 0.004000] console [tty0] enabled
[ 0.004000] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.004000] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.004000] Memory: 2000024k/2041856k available (2698k kernel code, 4068k absent, 37036k reserved, 1306k data, 336k init)
[ 0.004000] SLUB: Genslabs=12, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.004000] hpet clockevent registered
[ 0.004000] HPET: 4 timers in total, 0 timers will be used for per-cpu timer
[ 0.004000] Calibrating delay loop (skipped), value calculated using timer frequency.. 4521.73 BogoMIPS (lpj=9043464)
[ 0.004000] Security Framework initialized
[ 0.004000] Mount-cache hash table entries: 256
[ 0.004000] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.004000] CPU: L2 cache: 3072K
[ 0.004000] CPU: Physical Processor ID: 0
[ 0.004000] CPU: Processor Core ID: 0
[ 0.004000] CPU0: Thermal monitoring enabled (TM2)
[ 0.004000] using mwait in idle threads.
[ 0.004000] ACPI: Core revision 20080926
[ 0.048087] Setting APIC routing to flat
[ 0.048612] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.090145] CPU0: Intel(R) Core(TM)2 Duo CPU P8400 @ 2.26GHz stepping 06
[ 0.092001] Booting processor 1 APIC 0x1 ip 0x6000
[ 0.004000] Initializing CPU#1
[ 0.004000] Calibrating delay using timer specific routine.. 4522.06 BogoMIPS (lpj=9044130)
[ 0.004000] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.004000] CPU: L2 cache: 3072K
[ 0.004000] CPU: Physical Processor ID: 0
[ 0.004000] CPU: Processor Core ID: 1
[ 0.004000] CPU1: Thermal monitoring enabled (TM2)
[ 0.177246] CPU1: Intel(R) Core(TM)2 Duo CPU P8400 @ 2.26GHz stepping 06
[ 0.178477] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
[ 0.180025] Brought up 2 CPUs
[ 0.180155] Total of 2 processors activated (9043.79 BogoMIPS).
[ 0.180409] net_namespace: 1328 bytes
[ 0.184030] regulator: core version 0.5
[ 0.184180] NET: Registered protocol family 16
[ 0.184219] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[ 0.184224] ACPI: bus type pci registered
[ 0.184375] PCI: Using configuration type 1 for base access
[ 0.194968] ACPI: EC: EC description table is found, configuring boot EC
[ 0.214969] ACPI: BIOS _OSI(Linux) query ignored
[ 0.212021] ACPI: EC: non-query interrupt received, switching to interrupt mode
[ 0.235233] ACPI: Interpreter enabled
[ 0.235365] ACPI: (supports S0 S3 S5)
[ 0.235670] ACPI: Using IOAPIC for interrupt routing
[ 0.276453] ACPI: EC: GPE = 0x11, I/O: command/status = 0x66, data = 0x62
[ 0.276591] ACPI: EC: driver started in interrupt mode
[ 0.281545] ACPI: ACPI Dock Station Driver: 3 docks/bays found
[ 0.284332] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.284543] pci 0000:00:02.0: reg 10 64bit mmio: [0xf2000000-0xf23fffff]
[ 0.284543] pci 0000:00:02.0: reg 18 64bit mmio: [0xd0000000-0xdfffffff]
[ 0.284543] pci 0000:00:02.0: reg 20 io port: [0x1800-0x1807]
[ 0.284543] pci 0000:00:02.1: reg 10 64bit mmio: [0xf2400000-0xf24fffff]
[ 0.284543] pci 0000:00:03.0: reg 10 64bit mmio: [0xf2826800-0xf282680f]
[ 0.284543] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
[ 0.284543] pci 0000:00:03.0: PME# disabled
[ 0.284746] pci 0000:00:19.0: reg 10 32bit mmio: [0xf2600000-0xf261ffff]
[ 0.284758] pci 0000:00:19.0: reg 14 32bit mmio: [0xf2625000-0xf2625fff]
[ 0.284770] pci 0000:00:19.0: reg 18 io port: [0x1840-0x185f]
[ 0.284816] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
[ 0.284951] pci 0000:00:19.0: PME# disabled
[ 0.285168] pci 0000:00:1a.0: reg 20 io port: [0x1860-0x187f]
[ 0.285280] pci 0000:00:1a.1: reg 20 io port: [0x1880-0x189f]
[ 0.285392] pci 0000:00:1a.2: reg 20 io port: [0x18a0-0x18bf]
[ 0.285507] pci 0000:00:1a.7: reg 10 32bit mmio: [0xf2826c00-0xf2826fff]
[ 0.285572] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
[ 0.285708] pci 0000:00:1a.7: PME# disabled
[ 0.285907] pci 0000:00:1b.0: reg 10 64bit mmio: [0xf2620000-0xf2623fff]
[ 0.285960] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.286096] pci 0000:00:1b.0: PME# disabled
[ 0.286307] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.286443] pci 0000:00:1c.0: PME# disabled
[ 0.286656] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 0.286791] pci 0000:00:1c.1: PME# disabled
[ 0.287010] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[ 0.288010] pci 0000:00:1c.3: PME# disabled
[ 0.288239] pci 0000:00:1d.0: reg 20 io port: [0x18c0-0x18df]
[ 0.288351] pci 0000:00:1d.1: reg 20 io port: [0x18e0-0x18ff]
[ 0.288463] pci 0000:00:1d.2: reg 20 io port: [0x1c00-0x1c1f]
[ 0.288577] pci 0000:00:1d.7: reg 10 32bit mmio: [0xf2827000-0xf28273ff]
[ 0.288643] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.288779] pci 0000:00:1d.7: PME# disabled
[ 0.289187] pci 0000:00:1f.2: reg 10 io port: [0x1c48-0x1c4f]
[ 0.289198] pci 0000:00:1f.2: reg 14 io port: [0x183c-0x183f]
[ 0.289210] pci 0000:00:1f.2: reg 18 io port: [0x1c40-0x1c47]
[ 0.289221] pci 0000:00:1f.2: reg 1c io port: [0x1838-0x183b]
[ 0.289232] pci 0000:00:1f.2: reg 20 io port: [0x1c20-0x1c3f]
[ 0.289243] pci 0000:00:1f.2: reg 24 32bit mmio: [0xf2826000-0xf28267ff]
[ 0.289271] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.289405] pci 0000:00:1f.2: PME# disabled
[ 0.289585] pci 0000:00:1f.3: reg 10 64bit mmio: [0xf2827400-0xf28274ff]
[ 0.289612] pci 0000:00:1f.3: reg 20 io port: [0x1c60-0x1c7f]
[ 0.289830] pci 0000:03:00.0: reg 10 64bit mmio: [0xf2500000-0xf2501fff]
[ 0.289916] pci 0000:03:00.0: PME# supported from D0 D3hot D3cold
[ 0.290056] pci 0000:03:00.0: PME# disabled
[ 0.292112] pci 0000:00:1c.1: bridge 32bit mmio: [0xf2500000-0xf25fffff]
[ 0.292196] pci 0000:00:1c.3: bridge io port: [0x2000-0x2fff]
[ 0.292204] pci 0000:00:1c.3: bridge 32bit mmio: [0xf0000000-0xf1ffffff]
[ 0.292216] pci 0000:00:1c.3: bridge 64bit mmio pref: [0xf2900000-0xf29fffff]
[ 0.292304] pci 0000:00:1e.0: transparent bridge
[ 0.292480] bus 00 -> node 0
[ 0.292500] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.293406] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP0._PRT]
[ 0.293814] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP1._PRT]
[ 0.294227] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP3._PRT]
[ 0.304462] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11)
[ 0.308187] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 *11)
[ 0.309374] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 *11)
[ 0.310558] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11)
[ 0.311742] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 *11)
[ 0.312917] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 *11)
[ 0.314100] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 *11)
[ 0.315281] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 *11)
[ 0.316200] ACPI: Power Resource [PUBS] (on)
[ 0.317486] SCSI subsystem initialized
[ 0.317694] libata version 3.00 loaded.
[ 0.318074] PCI: Using ACPI for IRQ routing
[ 0.328082] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
[ 0.328442] hpet0: 4 comparators, 64-bit 14.318180 MHz counter
[ 0.354698] pnp: PnP ACPI init
[ 0.354840] ACPI: bus type pnp registered
[ 0.424807] pnp: PnP ACPI: found 10 devices
[ 0.424939] ACPI: ACPI bus type pnp unregistered
[ 0.425086] system 00:00: iomem range 0x0-0x9ffff could not be reserved
[ 0.425222] system 00:00: iomem range 0xc0000-0xc3fff has been reserved
[ 0.425357] system 00:00: iomem range 0xc4000-0xc7fff has been reserved
[ 0.425491] system 00:00: iomem range 0xc8000-0xcbfff has been reserved
[ 0.425626] system 00:00: iomem range 0xcc000-0xcffff has been reserved
[ 0.425761] system 00:00: iomem range 0xd0000-0xd3fff has been reserved
[ 0.425896] system 00:00: iomem range 0xdc000-0xdffff could not be reserved
[ 0.426031] system 00:00: iomem range 0xe0000-0xe3fff could not be reserved
[ 0.426167] system 00:00: iomem range 0xe4000-0xe7fff could not be reserved
[ 0.426302] system 00:00: iomem range 0xe8000-0xebfff could not be reserved
[ 0.426438] system 00:00: iomem range 0xec000-0xeffff could not be reserved
[ 0.426573] system 00:00: iomem range 0xf0000-0xfffff could not be reserved
[ 0.426722] system 00:00: iomem range 0x100000-0x7effffff could not be reserved
[ 0.426935] system 00:00: iomem range 0xfec00000-0xfed3ffff could not be reserved
[ 0.427148] system 00:00: iomem range 0xfed4c000-0xffffffff could not be reserved
[ 0.427370] system 00:02: ioport range 0x164e-0x164f has been reserved
[ 0.427505] system 00:02: ioport range 0x1000-0x107f has been reserved
[ 0.427640] system 00:02: ioport range 0x1180-0x11ff has been reserved
[ 0.427775] system 00:02: ioport range 0x800-0x80f has been reserved
[ 0.427909] system 00:02: ioport range 0x15e0-0x15ef has been reserved
[ 0.428044] system 00:02: ioport range 0x1600-0x1641 has been reserved
[ 0.428179] system 00:02: ioport range 0x1600-0x161b has been reserved
[ 0.428315] system 00:02: iomem range 0xe0000000-0xefffffff has been reserved
[ 0.428452] system 00:02: iomem range 0xfed1c000-0xfed1ffff has been reserved
[ 0.428587] system 00:02: iomem range 0xfed10000-0xfed13fff has been reserved
[ 0.428724] system 00:02: iomem range 0xfed18000-0xfed18fff has been reserved
[ 0.428860] system 00:02: iomem range 0xfed19000-0xfed19fff has been reserved
[ 0.428996] system 00:02: iomem range 0xfed45000-0xfed4bfff has been reserved
[ 0.434601] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:02
[ 0.434748] pci 0000:00:1c.0: IO window: disabled
[ 0.434884] pci 0000:00:1c.0: MEM window: disabled
[ 0.435017] pci 0000:00:1c.0: PREFETCH window: disabled
[ 0.435156] pci 0000:00:1c.1: PCI bridge, secondary bus 0000:03
[ 0.435288] pci 0000:00:1c.1: IO window: disabled
[ 0.435425] pci 0000:00:1c.1: MEM window: 0xf2500000-0xf25fffff
[ 0.435561] pci 0000:00:1c.1: PREFETCH window: disabled
[ 0.435699] pci 0000:00:1c.3: PCI bridge, secondary bus 0000:05
[ 0.435834] pci 0000:00:1c.3: IO window: 0x2000-0x2fff
[ 0.435971] pci 0000:00:1c.3: MEM window: 0xf0000000-0xf1ffffff
[ 0.436108] pci 0000:00:1c.3: PREFETCH window: 0x000000f2900000-0x000000f29fffff
[ 0.436326] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:0d
[ 0.436458] pci 0000:00:1e.0: IO window: disabled
[ 0.436593] pci 0000:00:1e.0: MEM window: disabled
[ 0.436727] pci 0000:00:1e.0: PREFETCH window: disabled
[ 0.436882] pci 0000:00:1c.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[ 0.437020] pci 0000:00:1c.0: setting latency timer to 64
[ 0.437036] pci 0000:00:1c.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[ 0.437173] pci 0000:00:1c.1: setting latency timer to 64
[ 0.437189] pci 0000:00:1c.3: PCI INT D -> GSI 23 (level, low) -> IRQ 23
[ 0.437326] pci 0000:00:1c.3: setting latency timer to 64
[ 0.437338] pci 0000:00:1e.0: setting latency timer to 64
[ 0.437345] bus: 00 index 0 io port: [0x00-0xffff]
[ 0.437477] bus: 00 index 1 mmio: [0x000000-0xffffffffffffffff]
[ 0.437611] bus: 02 index 0 mmio: [0x0-0x0]
[ 0.437740] bus: 02 index 1 mmio: [0x0-0x0]
[ 0.437869] bus: 02 index 2 mmio: [0x0-0x0]
[ 0.437998] bus: 02 index 3 mmio: [0x0-0x0]
[ 0.438128] bus: 03 index 0 mmio: [0x0-0x0]
[ 0.438257] bus: 03 index 1 mmio: [0xf2500000-0xf25fffff]
[ 0.438389] bus: 03 index 2 mmio: [0x0-0x0]
[ 0.438518] bus: 03 index 3 mmio: [0x0-0x0]
[ 0.438648] bus: 05 index 0 io port: [0x2000-0x2fff]
[ 0.438793] bus: 05 index 1 mmio: [0xf0000000-0xf1ffffff]
[ 0.438925] bus: 05 index 2 mmio: [0xf2900000-0xf29fffff]
[ 0.439056] bus: 05 index 3 mmio: [0x0-0x0]
[ 0.439185] bus: 0d index 0 mmio: [0x0-0x0]
[ 0.439315] bus: 0d index 1 mmio: [0x0-0x0]
[ 0.439444] bus: 0d index 2 mmio: [0x0-0x0]
[ 0.439574] bus: 0d index 3 io port: [0x00-0xffff]
[ 0.439705] bus: 0d index 4 mmio: [0x000000-0xffffffffffffffff]
[ 0.439851] NET: Registered protocol family 2
[ 0.486792] IP route cache hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.488015] TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
[ 0.490954] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.491937] TCP: Hash tables configured (established 262144 bind 65536)
[ 0.492071] TCP reno registered
[ 0.502859] NET: Registered protocol family 1
[ 0.503440] Simple Boot Flag at 0x35 set to 0x1
[ 0.505726] Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[ 0.511620] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.516989] VFS: Disk quotas dquot_6.5.2
[ 0.517284] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.518511] JFS: nTxBlock = 8192, nTxLock = 65536
[ 0.523648] msgmni has been set to 3907
[ 0.524220] io scheduler noop registered
[ 0.524351] io scheduler anticipatory registered (default)
[ 0.524483] io scheduler deadline registered
[ 0.524759] io scheduler cfq registered
[ 0.524910] pci 0000:00:02.0: Boot video device
[ 0.525345] pcieport-driver 0000:00:1c.0: setting latency timer to 64
[ 0.525402] pcieport-driver 0000:00:1c.0: found MSI capability
[ 0.525580] pcieport-driver 0000:00:1c.0: irq 319 for MSI/MSI-X
[ 0.525603] pci_express 0000:00:1c.0:pcie00: allocate port service
[ 0.525690] pci_express 0000:00:1c.0:pcie02: allocate port service
[ 0.525848] pcieport-driver 0000:00:1c.1: setting latency timer to 64
[ 0.525904] pcieport-driver 0000:00:1c.1: found MSI capability
[ 0.526075] pcieport-driver 0000:00:1c.1: irq 318 for MSI/MSI-X
[ 0.526097] pci_express 0000:00:1c.1:pcie00: allocate port service
[ 0.526185] pci_express 0000:00:1c.1:pcie02: allocate port service
[ 0.526348] pcieport-driver 0000:00:1c.3: setting latency timer to 64
[ 0.526403] pcieport-driver 0000:00:1c.3: found MSI capability
[ 0.526574] pcieport-driver 0000:00:1c.3: irq 317 for MSI/MSI-X
[ 0.526597] pci_express 0000:00:1c.3:pcie00: allocate port service
[ 0.526678] pci_express 0000:00:1c.3:pcie02: allocate port service
[ 0.527890] ACPI: AC Adapter [AC] (off-line)
[ 0.550720] Switched to high resolution mode on CPU 1
[ 0.552017] Switched to high resolution mode on CPU 0
[ 0.560413] ACPI Warning (nspredef-0858): \_SB_.PCI0.LPC_.EC__.BAT0._BIF: Return Package type mismatch at index 9 - found Buffer, expected String [20080926]
[ 0.570012] ACPI: Battery Slot [BAT0] (battery present)
[ 0.570425] input: Power Button (FF) as /class/input/input0
[ 0.570624] ACPI: Power Button (FF) [PWRF]
[ 0.571013] input: Lid Switch as /class/input/input1
[ 0.572746] ACPI: Lid Switch [LID]
[ 0.573052] input: Sleep Button (CM) as /class/input/input2
[ 0.573190] ACPI: Sleep Button (CM) [SLPB]
[ 0.575272] ACPI: SSDT 7C6D6C20, 02C8 (r1 PmRef Cpu0Ist 3000 INTL 20050624)
[ 0.577174] ACPI: SSDT 7C6D4020, 087A (r1 PmRef Cpu0Cst 3001 INTL 20050624)
[ 0.586956] Monitor-Mwait will be used to enter C-1 state
[ 0.586964] Monitor-Mwait will be used to enter C-2 state
[ 0.586969] Monitor-Mwait will be used to enter C-3 state
[ 0.586978] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
[ 0.587448] processor ACPI_CPU:00: registered as cooling_device0
[ 0.587608] ACPI: Processor [CPU0] (supports 8 throttling states)
[ 0.589290] ACPI: SSDT 7C6D5CA0, 01CF (r1 PmRef ApIst 3000 INTL 20050624)
[ 0.591008] ACPI: SSDT 7C6D5F20, 008D (r1 PmRef ApCst 3000 INTL 20050624)
[ 0.595996] Marking TSC unstable due to possible TSC halt in C2
[ 0.596234] ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3])
[ 0.596815] processor ACPI_CPU:01: registered as cooling_device1
[ 0.596954] ACPI: Processor [CPU1] (supports 8 throttling states)
[ 0.649207] thermal LNXTHERM:01: registered as thermal_zone0
[ 0.654034] ACPI: Thermal Zone [THM0] (22 C)
[ 0.656752] thermal LNXTHERM:02: registered as thermal_zone1
[ 0.659802] ACPI: Thermal Zone [THM1] (31 C)
[ 0.777734] Linux agpgart interface v0.103
[ 1.000230] Clocksource tsc unstable (delta = -241799693 ns)
[ 3.792273] floppy0: no floppy controllers found
[ 3.797798] brd: module loaded
[ 3.798225] Uniform Multi-Platform E-IDE driver
[ 3.798756] ide-gd driver 1.18
[ 3.799476] Driver 'sd' needs updating - please use bus_type methods
[ 3.799786] ahci 0000:00:1f.2: version 3.0
[ 3.799817] ahci 0000:00:1f.2: PCI INT B -> GSI 16 (level, low) -> IRQ 16
[ 3.800035] ahci 0000:00:1f.2: irq 316 for MSI/MSI-X
[ 3.800131] ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 4 ports 3 Gbps 0x3 impl SATA mode
[ 3.800346] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pio slum part
[ 3.800562] ahci 0000:00:1f.2: setting latency timer to 64
[ 3.800876] scsi0 : ahci
[ 3.801345] scsi1 : ahci
[ 3.801706] scsi2 : ahci
[ 3.802100] scsi3 : ahci
[ 3.803813] ata1: SATA max UDMA/133 abar m2048@0xf2826000 port 0xf2826100 irq 316
[ 3.804038] ata2: SATA max UDMA/133 abar m2048@0xf2826000 port 0xf2826180 irq 316
[ 3.804249] ata3: DUMMY
[ 3.804376] ata4: DUMMY
[ 4.120263] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 4.166382] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 succeeded
[ 4.166391] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 filtered out
[ 4.166662] ata1.00: ACPI cmd ef/5f:00:00:00:00:a0 succeeded
[ 4.166670] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 filtered out
[ 4.167606] ata1.00: ATA-8: ST9250827AS, 3.CMF, max UDMA/100
[ 4.167740] ata1.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 31/32)
[ 4.177447] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 succeeded
[ 4.177453] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 filtered out
[ 4.177712] ata1.00: ACPI cmd ef/5f:00:00:00:00:a0 succeeded
[ 4.177719] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 filtered out
[ 4.178703] ata1.00: configured for UDMA/100
[ 4.206081] ata1.00: configured for UDMA/100
[ 4.206220] ata1: EH complete
[ 4.524264] ata2: SATA link down (SStatus 0 SControl 300)
[ 4.540536] scsi 0:0:0:0: Direct-Access ATA ST9250827AS 3.CM PQ: 0 ANSI: 5
[ 4.541348] sd 0:0:0:0: [sda] 488397168 512-byte hardware sectors: (250 GB/232 GiB)
[ 4.541590] sd 0:0:0:0: [sda] Write Protect is off
[ 4.541722] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 4.541768] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 4.542101] sd 0:0:0:0: [sda] 488397168 512-byte hardware sectors: (250 GB/232 GiB)
[ 4.542337] sd 0:0:0:0: [sda] Write Protect is off
[ 4.542469] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 4.542514] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 4.542730] sda: sda1 sda2 sda3
[ 4.600067] sd 0:0:0:0: [sda] Attached SCSI disk
[ 4.600670] Fusion MPT base driver 3.04.07
[ 4.600800] Copyright (c) 1999-2008 LSI Corporation
[ 4.600947] Fusion MPT SPI Host driver 3.04.07
[ 4.602624] ieee1394: raw1394: /dev/raw1394 device initialized
[ 4.603214] PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
[ 4.613933] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 4.614089] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 4.614646] mice: PS/2 mouse device common for all mice
[ 4.666263] oprofile: using NMI interrupt.
[ 4.667084] TCP cubic registered
[ 4.667215] NET: Registered protocol family 17
[ 4.669608] registered taskstats version 1
[ 4.670898] input: AT Translated Set 2 keyboard as /class/input/input3
[ 4.927745] elantech.c: unexpected magic knock result 0x00, 0x02, 0x64.
[ 5.245918] IBM TrackPoint firmware: 0x0e, buttons: 3/3
[ 5.265211] input: TPPS/2 IBM TrackPoint as /class/input/input4
[ 5.467864] VFS: Mounted root (jfs filesystem) readonly.
[ 5.468058] Freeing unused kernel memory: 336k freed
[ 8.411176] Non-volatile memory driver v1.2
[ 8.633114] thinkpad_acpi: ThinkPad ACPI Extras v0.21
[ 8.633219] thinkpad_acpi: http://ibm-acpi.sf.net/
[ 8.633319] thinkpad_acpi: ThinkPad BIOS 6DET28WW (1.05 ), EC 7XHT21WW-1.03
[ 8.633423] thinkpad_acpi: Lenovo ThinkPad X200, model 7458AH8
[ 8.634040] thinkpad_acpi: radio switch found; radios are enabled
[ 8.634262] thinkpad_acpi: This ThinkPad has standard ACPI backlight brightness control, supported by the ACPI video driver
[ 8.634429] thinkpad_acpi: Disabling thinkpad-acpi brightness events by default...
[ 8.642597] Registered led device: tpacpi::thinklight
[ 8.642729] Registered led device: tpacpi::power
[ 8.642844] Registered led device: tpacpi:orange:batt
[ 8.642963] Registered led device: tpacpi:green:batt
[ 8.643079] Registered led device: tpacpi::dock_active
[ 8.643194] Registered led device: tpacpi::bay_active
[ 8.643308] Registered led device: tpacpi::dock_batt
[ 8.643422] Registered led device: tpacpi::unknown_led
[ 8.643535] Registered led device: tpacpi::standby
[ 8.645631] thinkpad_acpi: Standard ACPI backlight interface available, not loading native one.
[ 8.646007] input: ThinkPad Extra Buttons as /class/input/input5
[ 8.672807] agpgart-intel 0000:00:00.0: Intel Mobile Intel? GM45 Express Chipset
[ 8.673866] agpgart-intel 0000:00:00.0: detected 32764K stolen memory
[ 8.676959] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000
[ 8.766075] e1000e: Intel(R) PRO/1000 Network Driver - 0.3.3.3-k6
[ 8.766181] e1000e: Copyright (c) 1999-2008 Intel Corporation.
[ 8.766318] e1000e 0000:00:19.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[ 8.766428] e1000e 0000:00:19.0: setting latency timer to 64
[ 8.766521] e1000e 0000:00:19.0: irq 315 for MSI/MSI-X
[ 8.852063] usbcore: registered new interface driver usbfs
[ 8.852190] usbcore: registered new interface driver hub
[ 8.855386] 0000:00:19.0: eth0: (PCI Express:2.5GB/s:Width x1) 00:1f:16:09:46:11
[ 8.855549] 0000:00:19.0: eth0: Intel(R) PRO/1000 Network Connection
[ 8.855674] 0000:00:19.0: eth0: MAC: 6, PHY: 8, PBA No: 1008ff-0ff
[ 8.885225] ACPI: WMI: Mapper loaded
[ 8.892039] usbcore: registered new device driver usb
[ 8.900060] uhci_hcd: USB Universal Host Controller Interface driver
[ 8.900659] uhci_hcd 0000:00:1a.0: power state changed by ACPI to D0
[ 8.900767] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[ 8.900877] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[ 8.900880] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[ 8.901017] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
[ 8.901212] uhci_hcd 0000:00:1a.0: irq 20, io base 0x00001860
[ 8.901420] usb usb1: configuration #1 chosen from 1 choice
[ 8.901544] hub 1-0:1.0: USB hub found
[ 8.901647] hub 1-0:1.0: 2 ports detected
[ 8.901840] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[ 8.901948] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[ 8.901951] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[ 8.902069] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 2
[ 8.902257] uhci_hcd 0000:00:1a.1: irq 21, io base 0x00001880
[ 8.902423] usb usb2: configuration #1 chosen from 1 choice
[ 8.902546] hub 2-0:1.0: USB hub found
[ 8.902649] hub 2-0:1.0: 2 ports detected
[ 8.903373] uhci_hcd 0000:00:1a.2: power state changed by ACPI to D0
[ 8.903481] uhci_hcd 0000:00:1a.2: PCI INT C -> GSI 22 (level, low) -> IRQ 22
[ 8.903589] uhci_hcd 0000:00:1a.2: setting latency timer to 64
[ 8.903591] uhci_hcd 0000:00:1a.2: UHCI Host Controller
[ 8.903714] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 3
[ 8.903902] uhci_hcd 0000:00:1a.2: irq 22, io base 0x000018a0
[ 8.904079] usb usb3: configuration #1 chosen from 1 choice
[ 8.904201] hub 3-0:1.0: USB hub found
[ 8.904305] hub 3-0:1.0: 2 ports detected
[ 8.905053] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0
[ 8.905159] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 8.905267] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 8.905269] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 8.905394] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 4
[ 8.905583] uhci_hcd 0000:00:1d.0: irq 16, io base 0x000018c0
[ 8.905755] usb usb4: configuration #1 chosen from 1 choice
[ 8.905878] hub 4-0:1.0: USB hub found
[ 8.905984] hub 4-0:1.0: 2 ports detected
[ 8.906165] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 8.906273] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 8.906276] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 8.906396] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 5
[ 8.906584] uhci_hcd 0000:00:1d.1: irq 17, io base 0x000018e0
[ 8.906752] usb usb5: configuration #1 chosen from 1 choice
[ 8.906874] hub 5-0:1.0: USB hub found
[ 8.906977] hub 5-0:1.0: 2 ports detected
[ 8.907157] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 8.907265] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 8.907268] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 8.907389] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 6
[ 8.907576] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001c00
[ 8.907744] usb usb6: configuration #1 chosen from 1 choice
[ 8.907866] hub 6-0:1.0: USB hub found
[ 8.907969] hub 6-0:1.0: 2 ports detected
[ 8.994725] acpi device:03: registered as cooling_device2
[ 8.995079] input: Video Bus as /class/input/input6
[ 9.028096] ACPI: Video Device [VID] (multi-head: yes rom: no post: no)
[ 9.126010] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 9.126126] Warning! ehci_hcd should always be loaded before uhci_hcd and ohci_hcd, not after
[ 9.127099] ehci_hcd 0000:00:1a.7: power state changed by ACPI to D0
[ 9.127218] ehci_hcd 0000:00:1a.7: PCI INT D -> GSI 23 (level, low) -> IRQ 23
[ 9.127357] ehci_hcd 0000:00:1a.7: setting latency timer to 64
[ 9.127360] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[ 9.127507] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 7
[ 9.131600] ehci_hcd 0000:00:1a.7: debug port 1
[ 9.131705] ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported
[ 9.131721] ehci_hcd 0000:00:1a.7: irq 23, io mem 0xf2826c00
[ 9.213019] usb 2-1: new full speed USB device using uhci_hcd and address 2
[ 9.224017] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[ 9.224233] usb usb7: configuration #1 chosen from 1 choice
[ 9.224360] hub 7-0:1.0: USB hub found
[ 9.224474] hub 7-0:1.0: 6 ports detected
[ 9.225013] ehci_hcd 0000:00:1d.7: power state changed by ACPI to D0
[ 9.225127] ehci_hcd 0000:00:1d.7: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[ 9.225249] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 9.225252] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 9.225376] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 8
[ 9.229440] ehci_hcd 0000:00:1d.7: debug port 1
[ 9.229557] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[ 9.229575] ehci_hcd 0000:00:1d.7: irq 19, io mem 0xf2827000
[ 9.256042] cfg80211: Calling CRDA to update world regulatory domain
[ 9.280450] hub 2-0:1.0: unable to enumerate USB device on port 1
[ 9.292014] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 9.292226] usb usb8: configuration #1 chosen from 1 choice
[ 9.292351] hub 8-0:1.0: USB hub found
[ 9.292455] hub 8-0:1.0: 6 ports detected
[ 9.418087] input: PC Speaker as /class/input/input7
[ 9.554849] iwlagn: Intel(R) Wireless WiFi Link AGN driver for Linux, 1.3.27ks
[ 9.555015] iwlagn: Copyright(c) 2003-2008 Intel Corporation
[ 9.555187] vendor=8086 device=2942
[ 9.555287] iwlagn 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 9.555397] iwlagn 0000:03:00.0: setting latency timer to 64
[ 9.555433] iwlagn: Detected Intel Wireless WiFi Link 5300AGN REV=0x24
[ 9.584424] iwlagn: Tunable channels: 13 802.11bg, 24 802.11a channels
[ 9.613644] rtc_cmos 00:07: RTC can wake from S4
[ 9.613837] rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0
[ 9.613964] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 9.621878] vendor=8086 device=2942
[ 9.621981] iwlagn 0000:03:00.0: PCI INT A disabled
[ 9.622131] wmaster0 (iwlagn): not using net_device_ops yet
[ 9.622412] phy0: Selected rate control algorithm 'iwl-agn-rs'
[ 9.626504] i801_smbus 0000:00:1f.3: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 9.795660] HDA Intel 0000:00:1b.0: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 9.795905] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 9.876254] usb 7-6: new high speed USB device using ehci_hcd and address 4
[ 9.902146] wlan0 (iwlagn): not using net_device_ops yet
[ 10.017092] usb 7-6: configuration #1 chosen from 1 choice
[ 10.257092] usb 2-1: new full speed USB device using uhci_hcd and address 3
[ 10.427664] usb 2-1: configuration #1 chosen from 1 choice
[ 10.669257] usb 2-2: new full speed USB device using uhci_hcd and address 4
[ 10.838641] usb 2-2: configuration #1 chosen from 1 choice
[ 11.009360] Bluetooth: Core ver 2.13
[ 11.018740] NET: Registered protocol family 31
[ 11.018852] Bluetooth: HCI device and connection manager initialized
[ 11.018967] Bluetooth: HCI socket layer initialized
[ 11.086549] Bluetooth: Generic Bluetooth USB driver ver 0.3
[ 11.086739] usbcore: registered new interface driver btusb
[ 13.612854] loop: module loaded
[ 14.205133] device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: dm-devel@redhat.com
[ 20.255989] alg: No test for stdrng (krng)
[ 20.278719] alg: No test for stdrng (ansi_cprng)
[ 34.021658] Adding 4982032k swap on /dev/mapper/swap. Priority:-1 extents:1 across:4982032k
[ 36.349598] e1000e 0000:00:19.0: irq 315 for MSI/MSI-X
[ 36.405317] e1000e 0000:00:19.0: irq 315 for MSI/MSI-X
[ 41.128632] NET: Registered protocol family 10
[ 41.130107] lo: Disabled Privacy Extensions
[ 41.131313] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 44.002435] thinkpad_acpi: setting the hotkey mask to 0x00ffffff is likely not the best way to go about it
[ 44.002659] thinkpad_acpi: please consider using the driver defaults, and refer to up-to-date thinkpad-acpi documentation
[ 44.068569] input: /usr/sbin/thinkpad-keys as /class/input/input8
[ 50.280071] warning: `avahi-daemon' uses 32-bit capabilities (legacy support in use)
[ 52.189090] Bluetooth: L2CAP ver 2.11
[ 52.189243] Bluetooth: L2CAP socket layer initialized
[ 52.211628] Bluetooth: RFCOMM socket layer initialized
[ 52.211817] Bluetooth: RFCOMM TTY layer initialized
[ 52.211982] Bluetooth: RFCOMM ver 1.10
[ 52.637419] vendor=8086 device=2942
[ 52.637637] iwlagn 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 52.637855] iwlagn 0000:03:00.0: restoring config space at offset 0x1 (was 0x100102, writing 0x100106)
[ 52.637964] iwlagn 0000:03:00.0: irq 314 for MSI/MSI-X
[ 52.638044] iwlagn 0000:03:00.0: firmware: requesting iwlwifi-5000-1.ucode
[ 54.991303] Registered led device: iwl-phy0:radio
[ 54.991446] Registered led device: iwl-phy0:assoc
[ 54.991581] Registered led device: iwl-phy0:RX
[ 54.991721] Registered led device: iwl-phy0:TX
[ 55.509252] iwlagn: Error sending REPLY_ADD_STA: time out after 500ms.
[ 55.510310] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 70.824192] [drm] Initialized drm 1.1.0 20060810
[ 70.854786] pci 0000:00:02.0: power state changed by ACPI to D0
[ 70.854804] pci 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 70.854813] pci 0000:00:02.0: setting latency timer to 64
[ 70.855326] pci 0000:00:02.0: irq 313 for MSI/MSI-X
[ 70.855552] [drm] Initialized i915 1.6.0 20080730 on minor 0
[ 71.694831] set status page addr 0x08da0000
[ 2841.533757] ata2: exception Emask 0x10 SAct 0x0 SErr 0x4040000 action 0xe frozen
[ 2841.533765] ata2: irq_stat 0x00000040, connection status changed
[ 2841.533772] ata2: SError: { CommWake DevExch }
[ 2841.533789] ata2: hard resetting link
[ 2842.256287] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 2842.402744] Monitor-Mwait will be used to enter C-3 state
[ 2842.422003] thinkpad_acpi: unhandled HKEY event 0x6030
[ 2842.424278] ACPI: \_SB_.PCI0.SATA.PRT1 - docking
[ 2842.427750] ata2.00: failed to IDENTIFY (I/O error, err_mask=0x100)
[ 2842.496906] ACPI: \_SB_.GDCK - docking
[ 2842.518162] ata2: hard resetting link
[ 2842.660122] usb 7-5: new high speed USB device using ehci_hcd and address 5
[ 2842.792616] usb 7-5: configuration #1 chosen from 1 choice
[ 2842.792823] hub 7-5:1.0: USB hub found
[ 2842.792887] hub 7-5:1.0: 4 ports detected
[ 2842.836076] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 2842.843020] ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 succeeded
[ 2842.843862] ata2.00: ACPI cmd e3/00:02:00:00:00:a0 succeeded
[ 2842.847537] ata2.00: ATAPI: HL-DT-ST DVDRAM GSA-U20N, HX10, max UDMA/133
[ 2842.855260] ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 succeeded
[ 2842.856200] ata2.00: ACPI cmd e3/00:02:00:00:00:a0 succeeded
[ 2842.859837] ata2.00: configured for UDMA/133
[ 2842.961849] e1000e: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: RX/TX
[ 2842.961852] 0000:00:19.0: eth0: 10/100 speed: disabling TSO
[ 2842.962142] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 2842.996920] ata2: exception Emask 0x10 SAct 0x0 SErr 0x0 action 0x9 t4
[ 2842.996928] ata2: irq_stat 0x40000001
[ 2843.005463] ata2.00: configured for UDMA/133
[ 2843.005472] ata2: EH complete
[ 2843.009098] scsi 1:0:0:0: CD-ROM HL-DT-ST DVDRAM GSA-U20N HX10 PQ: 0 ANSI: 5
[ 2843.068165] usb 7-5.4: new full speed USB device using ehci_hcd and address 6
[ 2843.168614] Driver 'sr' needs updating - please use bus_type methods
[ 2843.174862] usb 7-5.4: configuration #1 chosen from 1 choice
[ 2843.325884] usblp0: USB Bidirectional printer dev 6 if 0 alt 1 proto 2 vid 0x03F0 pid 0x0B17
[ 2843.326546] usbcore: registered new interface driver usblp
[ 2843.504294] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 2843.504305] Uniform CD-ROM driver Revision: 3.20
[ 2843.504501] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 2843.580303] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 2843.580395] sr 1:0:0:0: Attached scsi generic sg1 type 5
[ 2852.560863] hal_lpadmin[6955] general protection ip:44c404 sp:7fff75efa400 error:0 in python2.5[400000+125000]
[ 2860.241104] eth0: no IPv6 routers present
[15305.222227] wlan0: direct probe to AP 00:03:52:4d:bd:c1 try 1
[15305.224440] wlan0 direct probe responded
[15305.224447] wlan0: authenticate with AP 00:03:52:4d:bd:c1
[15305.420189] wlan0: authenticate with AP 00:03:52:4d:bd:c1
[15305.421958] wlan0: authenticated
[15305.421962] wlan0: associate with AP 00:03:52:4d:bd:c1
[15305.424042] wlan0: RX AssocResp from 00:03:52:4d:bd:c1 (capab=0x421 status=0 aid=2)
[15305.424048] wlan0: associated
[15305.429931] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[15315.896040] wlan0: no IPv6 routers present
[15393.079122] wlan0: authenticate with AP 00:03:52:4d:bd:c1
[15393.277127] wlan0: authenticate with AP 00:03:52:4d:bd:c1
[15393.278920] wlan0: authenticated
[15393.278926] wlan0: associate with AP 00:03:52:4d:bd:c1
[15393.283895] wlan0: RX AssocResp from 00:03:52:4d:bd:c1 (capab=0x421 status=0 aid=2)
[15393.283902] wlan0: associated
[15410.161450] e1000e 0000:00:19.0: irq 315 for MSI/MSI-X
[15410.217225] e1000e 0000:00:19.0: irq 315 for MSI/MSI-X
[15410.218148] ADDRCONF(NETDEV_UP): eth0: link is not ready
[15411.828833] e1000e: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: RX/TX
[15411.828841] 0000:00:19.0: eth0: 10/100 speed: disabling TSO
[15411.829588] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[15418.034813] tun: Universal TUN/TAP device driver, 1.6
[15418.034819] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[15418.039539] tun0: Disabled Privacy Extensions
[15425.232108] eth0: no IPv6 routers present
[15430.435475] tun0: Disabled Privacy Extensions
[15453.056477] e1000e 0000:00:19.0: irq 315 for MSI/MSI-X
[15453.112119] e1000e 0000:00:19.0: irq 315 for MSI/MSI-X
[15453.113028] ADDRCONF(NETDEV_UP): eth0: link is not ready
[15454.660921] e1000e: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: RX/TX
[15454.660930] 0000:00:19.0: eth0: 10/100 speed: disabling TSO
[15454.661695] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[15470.125102] eth0: no IPv6 routers present
[15484.652287] e1000e: eth0 NIC Link is Down
[15484.661790] usb 7-5: USB disconnect, address 5
[15484.661796] usb 7-5.4: USB disconnect, address 6
[15484.661992] ata2: exception Emask 0x10 SAct 0x0 SErr 0x4010000 action 0xe frozen
[15484.661998] ata2: irq_stat 0x00400040, connection status changed
[15484.662005] ata2: SError: { PHYRdyChg DevExch }
[15484.662074] ata2: hard resetting link
[15484.666858] usblp0: removed
[15485.334052] thinkpad_acpi: unhandled HKEY event 0x6030
[15485.385280] ata2: SATA link down (SStatus 0 SControl 300)
[15490.384290] ata2: hard resetting link
[15490.704284] ata2: SATA link down (SStatus 0 SControl 300)
[15495.704076] ata2: hard resetting link
[15496.024290] ata2: SATA link down (SStatus 0 SControl 300)
[15496.024303] ata2.00: disabled
[15496.024335] ata2: EH complete
[15496.024379] ata2.00: detaching (SCSI 1:0:0:0)
[15496.028120] ACPI: \_SB_.GDCK - undocking
[15496.040895] ACPI: \_SB_.PCI0.SATA.PRT1 - docking
[15496.041219] ACPI: Unable to dock!
[15598.130592] wlan0: deauthenticated (Reason: 6)
[15599.128084] wlan0: direct probe to AP 00:03:52:4d:bd:c1 try 1
[15599.328282] wlan0: direct probe to AP 00:03:52:4d:bd:c1 try 2
[15599.528276] wlan0: direct probe to AP 00:03:52:4d:bd:c1 try 3
[15599.728279] wlan0: direct probe to AP 00:03:52:4d:bd:c1 timed out
[15635.262530] wlan0: direct probe to AP 00:03:52:1b:f4:e1 try 1
[15635.460299] wlan0: direct probe to AP 00:03:52:1b:f4:e1 try 2
[15635.660265] wlan0: direct probe to AP 00:03:52:1b:f4:e1 try 3
[15635.860241] wlan0: direct probe to AP 00:03:52:1b:f4:e1 timed out
[15643.220187] wlan0: direct probe to AP 00:11:5c:d4:a3:50 try 1
[15643.420302] wlan0: direct probe to AP 00:11:5c:d4:a3:50 try 2
[15643.620321] wlan0: direct probe to AP 00:11:5c:d4:a3:50 try 3
[15643.820310] wlan0: direct probe to AP 00:11:5c:d4:a3:50 timed out
[15647.939300] wlan0: direct probe to AP 00:11:5c:d4:a3:50 try 1
[15648.136307] wlan0: direct probe to AP 00:11:5c:d4:a3:50 try 2
[15648.336323] wlan0: direct probe to AP 00:11:5c:d4:a3:50 try 3
[15648.536273] wlan0: direct probe to AP 00:11:5c:d4:a3:50 timed out
[15654.517102] wlan0: direct probe to AP 00:03:52:1b:f4:e1 try 1
[15654.716278] wlan0: direct probe to AP 00:03:52:1b:f4:e1 try 2
[15654.718580] wlan0 direct probe responded
[15654.718587] wlan0: authenticate with AP 00:03:52:1b:f4:e1
[15654.916276] wlan0: authenticate with AP 00:03:52:1b:f4:e1
[15655.116355] wlan0: authenticate with AP 00:03:52:1b:f4:e1
[15655.316294] wlan0: authentication with AP 00:03:52:1b:f4:e1 timed out
[15666.557180] vendor=8086 device=2942
[15666.557183] iwlagn 0000:03:00.0: PCI INT A disabled
[15671.557618] vendor=8086 device=2942
[15671.557629] iwlagn 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[15671.557718] iwlagn 0000:03:00.0: restoring config space at offset 0x1 (was 0x100102, writing 0x100106)
[15671.557827] iwlagn 0000:03:00.0: irq 314 for MSI/MSI-X
[15671.584261] Registered led device: iwl-phy0:radio
[15671.584323] Registered led device: iwl-phy0:assoc
[15671.584371] Registered led device: iwl-phy0:RX
[15671.584416] Registered led device: iwl-phy0:TX
[15671.603284] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[15671.605681] wlan0: direct probe to AP 00:03:52:1b:f4:e1 try 1
[15671.804281] wlan0: direct probe to AP 00:03:52:1b:f4:e1 try 2
[15672.004280] wlan0: direct probe to AP 00:03:52:1b:f4:e1 try 3
[15672.204280] wlan0: direct probe to AP 00:03:52:1b:f4:e1 timed out
[15681.069378] wlan0: direct probe to AP 00:03:52:1b:f4:e1 try 1
[15681.268268] wlan0: direct probe to AP 00:03:52:1b:f4:e1 try 2
[15681.468128] wlan0: direct probe to AP 00:03:52:1b:f4:e1 try 3
[15681.668284] wlan0: direct probe to AP 00:03:52:1b:f4:e1 timed out
[15701.859196] wlan0: direct probe to AP 00:03:52:4d:de:d1 try 1
[15702.057271] wlan0: direct probe to AP 00:03:52:4d:de:d1 try 2
[15702.059561] wlan0 direct probe responded
[15702.059568] wlan0: authenticate with AP 00:03:52:4d:de:d1
[15702.061994] wlan0: authenticated
[15702.062001] wlan0: associate with AP 00:03:52:4d:de:d1
[15702.260180] wlan0: associate with AP 00:03:52:4d:de:d1
[15702.262789] wlan0: RX AssocResp from 00:03:52:4d:de:d1 (capab=0x421 status=0 aid=3)
[15702.262797] wlan0: associated
[15702.267428] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[15712.580120] wlan0: no IPv6 routers present
[15837.147730] tun0: Disabled Privacy Extensions
[16158.185047] tun0: Disabled Privacy Extensions
[16800.685275] CE: hpet increasing min_delta_ns to 15000 nsec
[16907.487594] wlan0: deauthenticated (Reason: 2)
[16908.484273] wlan0: direct probe to AP 00:03:52:4d:de:d1 try 1
[16908.684268] wlan0: direct probe to AP 00:03:52:4d:de:d1 try 2
[16908.884269] wlan0: direct probe to AP 00:03:52:4d:de:d1 try 3
[16909.084269] wlan0: direct probe to AP 00:03:52:4d:de:d1 timed out
[16913.346601] wlan0: direct probe to AP 00:03:52:1b:f4:e1 try 1
[16913.349078] wlan0 direct probe responded
[16913.349087] wlan0: authenticate with AP 00:03:52:1b:f4:e1
[16913.548326] wlan0: authenticate with AP 00:03:52:1b:f4:e1
[16913.550415] wlan0: authenticated
[16913.550424] wlan0: associate with AP 00:03:52:1b:f4:e1
[16913.553924] wlan0: RX ReassocResp from 00:03:52:1b:f4:e1 (capab=0x21 status=0 aid=8)
[16913.553932] wlan0: associated
[17459.689363] wlan0: direct probe to AP 00:03:52:29:41:12 try 1
[17459.888266] wlan0: direct probe to AP 00:03:52:29:41:12 try 2
[17460.088331] wlan0: direct probe to AP 00:03:52:29:41:12 try 3
[17460.289046] wlan0: direct probe to AP 00:03:52:29:41:12 timed out
[17464.046046] wlan0: direct probe to AP 00:03:52:1c:12:11 try 1
[17464.244077] wlan0: direct probe to AP 00:03:52:1c:12:11 try 2
[17464.444279] wlan0: direct probe to AP 00:03:52:1c:12:11 try 3
[17464.644265] wlan0: direct probe to AP 00:03:52:1c:12:11 timed out
[17477.209800] wlan0: direct probe to AP 00:03:52:1b:f4:e1 try 1
[17477.408300] wlan0: direct probe to AP 00:03:52:1b:f4:e1 try 2
[17477.608336] wlan0: direct probe to AP 00:03:52:1b:f4:e1 try 3
[17477.808271] wlan0: direct probe to AP 00:03:52:1b:f4:e1 timed out
[17481.919537] wlan0: direct probe to AP 00:03:52:1b:f4:e1 try 1
[17482.116302] wlan0: direct probe to AP 00:03:52:1b:f4:e1 try 2
[17482.316328] wlan0: direct probe to AP 00:03:52:1b:f4:e1 try 3
[17482.516266] wlan0: direct probe to AP 00:03:52:1b:f4:e1 timed out
[17510.820330] wlan0: direct probe to AP 00:03:52:1b:f4:e1 try 1
[17510.820820] wlan0: direct probe to AP 00:03:52:1b:f4:e1 try 1
[17511.016060] wlan0: direct probe to AP 00:03:52:1b:f4:e1 try 2
[17511.216065] wlan0: direct probe to AP 00:03:52:1b:f4:e1 try 3
[17511.416265] wlan0: direct probe to AP 00:03:52:1b:f4:e1 timed out
[17530.855119] wlan0: direct probe to AP 00:03:52:4d:c1:f1 try 1
[17531.052302] wlan0: direct probe to AP 00:03:52:4d:c1:f1 try 2
[17531.252268] wlan0: direct probe to AP 00:03:52:4d:c1:f1 try 3
[17531.452081] wlan0: direct probe to AP 00:03:52:4d:c1:f1 timed out
[17535.695381] wlan0: direct probe to AP 00:03:52:4d:c1:f1 try 1
[17535.696516] wlan0: direct probe to AP 00:03:52:4d:c1:f1 try 1
[17535.892270] wlan0: direct probe to AP 00:03:52:4d:c1:f1 try 2
[17536.092274] wlan0: direct probe to AP 00:03:52:4d:c1:f1 try 3
[17536.292274] wlan0: direct probe to AP 00:03:52:4d:c1:f1 timed out
[17541.664743] wlan0: direct probe to AP 00:03:52:4d:c1:f1 try 1
[17541.666071] wlan0: direct probe to AP 00:03:52:4d:c1:f1 try 1
[17541.864311] wlan0: direct probe to AP 00:03:52:4d:c1:f1 try 2
[17542.064301] wlan0: direct probe to AP 00:03:52:4d:c1:f1 try 3
[17542.264275] wlan0: direct probe to AP 00:03:52:4d:c1:f1 timed out
[17629.421889] wlan0: direct probe to AP 00:03:52:1b:f4:e1 try 1
[17629.422353] wlan0: direct probe to AP 00:03:52:1b:f4:e1 try 1
[17629.620306] wlan0: direct probe to AP 00:03:52:1b:f4:e1 try 2
[17629.821267] wlan0: direct probe to AP 00:03:52:1b:f4:e1 try 3
[17630.021266] wlan0: direct probe to AP 00:03:52:1b:f4:e1 timed out
[18179.742897] vendor=8086 device=2942
[18179.742900] iwlagn 0000:03:00.0: PCI INT A disabled
[18193.030147] vendor=8086 device=2942
[18193.030159] iwlagn 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[18193.030248] iwlagn 0000:03:00.0: restoring config space at offset 0x1 (was 0x100102, writing 0x100106)
[18193.030357] iwlagn 0000:03:00.0: irq 314 for MSI/MSI-X
[18193.056855] Registered led device: iwl-phy0:radio
[18193.056910] Registered led device: iwl-phy0:assoc
[18193.056956] Registered led device: iwl-phy0:RX
[18193.059056] Registered led device: iwl-phy0:TX
[18193.075476] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[18193.077752] wlan0: direct probe to AP 00:03:52:4d:bd:c1 try 1
[18193.276276] wlan0: direct probe to AP 00:03:52:4d:bd:c1 try 2
[18193.476312] wlan0: direct probe to AP 00:03:52:4d:bd:c1 try 3
[18193.676300] wlan0: direct probe to AP 00:03:52:4d:bd:c1 timed out
[18304.966370] psmouse.c: TrackPoint at isa0060/serio1/input0 lost synchronization, throwing 1 bytes away.
[18304.967665] vendor=8086 device=2942
[18304.967668] iwlagn 0000:03:00.0: PCI INT A disabled
[18313.513145] iwlagn: Intel(R) Wireless WiFi Link AGN driver for Linux, 1.3.27ks
[18313.513153] iwlagn: Copyright(c) 2003-2008 Intel Corporation
[18313.513329] vendor=8086 device=2942
[18313.513337] iwlagn 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[18313.513386] iwlagn 0000:03:00.0: setting latency timer to 64
[18313.513496] iwlagn: Detected Intel Wireless WiFi Link 5300AGN REV=0x24
[18313.543349] iwlagn: Tunable channels: 13 802.11bg, 24 802.11a channels
[18313.546075] wmaster0 (iwlagn): not using net_device_ops yet
[18313.547593] phy1: Selected rate control algorithm 'iwl-agn-rs'
[18313.547644] wlan0 (iwlagn): not using net_device_ops yet
[18313.568716] vendor=8086 device=2942
[18313.572654] iwlagn 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[18313.572849] iwlagn 0000:03:00.0: irq 314 for MSI/MSI-X
[18313.572921] iwlagn 0000:03:00.0: firmware: requesting iwlwifi-5000-1.ucode
[18315.784739] Registered led device: iwl-phy1:radio
[18315.784985] Registered led device: iwl-phy1:assoc
[18315.785225] Registered led device: iwl-phy1:RX
[18315.785968] Registered led device: iwl-phy1:TX
[18315.806220] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[18335.966763] wlan0: direct probe to AP 00:03:52:4d:de:d1 try 1
[18335.969035] wlan0 direct probe responded
[18335.969042] wlan0: authenticate with AP 00:03:52:4d:de:d1
[18336.168271] wlan0: authenticate with AP 00:03:52:4d:de:d1
[18336.170239] wlan0: authenticated
[18336.170247] wlan0: associate with AP 00:03:52:4d:de:d1
[18336.172563] wlan0: RX AssocResp from 00:03:52:4d:de:d1 (capab=0x421 status=0 aid=3)
[18336.172571] wlan0: associated
[18336.177204] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[18346.232256] wlan0: no IPv6 routers present
[18347.759910] tun0: Disabled Privacy Extensions
[20268.634544] tun0: Disabled Privacy Extensions
[20289.040251] tun0: Disabled Privacy Extensions
[21217.789498] ata2: exception Emask 0x10 SAct 0x0 SErr 0x4040000 action 0xe frozen
[21217.789506] ata2: irq_stat 0x00000040, connection status changed
[21217.789513] ata2: SError: { CommWake DevExch }
[21217.789530] ata2: hard resetting link
[21218.512143] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[21218.670250] thinkpad_acpi: unhandled HKEY event 0x6030
[21218.673750] ACPI: \_SB_.PCI0.SATA.PRT1 - docking
[21218.675459] ata2.00: failed to IDENTIFY (I/O error, err_mask=0x100)
[21218.744731] ACPI: \_SB_.GDCK - docking
[21218.765828] ata2: hard resetting link
[21218.904153] usb 7-5: new high speed USB device using ehci_hcd and address 7
[21219.037376] usb 7-5: configuration #1 chosen from 1 choice
[21219.037619] hub 7-5:1.0: USB hub found
[21219.037920] hub 7-5:1.0: 4 ports detected
[21219.088071] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[21219.094748] ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 succeeded
[21219.095592] ata2.00: ACPI cmd e3/00:02:00:00:00:a0 succeeded
[21219.099346] ata2.00: ATAPI: HL-DT-ST DVDRAM GSA-U20N, HX10, max UDMA/133
[21219.106993] ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 succeeded
[21219.107834] ata2.00: ACPI cmd e3/00:02:00:00:00:a0 succeeded
[21219.111551] ata2.00: configured for UDMA/133
[21219.149795] e1000e: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: RX/TX
[21219.149798] 0000:00:19.0: eth0: 10/100 speed: disabling TSO
[21219.150114] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[21219.252515] ata2: exception Emask 0x10 SAct 0x0 SErr 0x0 action 0x9 t4
[21219.252519] ata2: irq_stat 0x40000001
[21219.261041] ata2.00: configured for UDMA/133
[21219.261046] ata2: EH complete
[21219.264686] scsi 1:0:0:0: CD-ROM HL-DT-ST DVDRAM GSA-U20N HX10 PQ: 0 ANSI: 5
[21219.308163] usb 7-5.4: new full speed USB device using ehci_hcd and address 8
[21219.402055] usb 7-5.4: configuration #1 chosen from 1 choice
[21219.403287] usblp0: USB Bidirectional printer dev 8 if 0 alt 1 proto 2 vid 0x03F0 pid 0x0B17
[21219.618168] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[21219.618246] sr 1:0:0:0: Attached scsi CD-ROM sr0
[21219.618340] sr 1:0:0:0: Attached scsi generic sg1 type 5
[21226.151216] hal_lpadmin[32664] general protection ip:44c404 sp:7fff85c16120 error:0 in python2.5[400000+125000]
[21233.980055] eth0: no IPv6 routers present
[21243.909124] wlan0: direct probe to AP 00:03:52:1b:f4:e1 try 1
[21244.108132] wlan0: direct probe to AP 00:03:52:1b:f4:e1 try 2
[21244.308202] wlan0: direct probe to AP 00:03:52:1b:f4:e1 try 3
[21244.508131] wlan0: direct probe to AP 00:03:52:1b:f4:e1 timed out
[21264.494910] psmouse.c: TrackPoint at isa0060/serio1/input0 lost synchronization, throwing 1 bytes away.
[21296.648349] vendor=8086 device=2942
[21296.648361] iwlagn 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[21296.648548] iwlagn 0000:03:00.0: irq 314 for MSI/MSI-X
[21296.675772] Registered led device: iwl-phy1:radio
[21296.675835] Registered led device: iwl-phy1:assoc
[21296.675883] Registered led device: iwl-phy1:RX
[21296.675928] Registered led device: iwl-phy1:TX
[21296.695131] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[32144.786555] PM: Syncing filesystems ... done.
[32146.166548] Freezing user space processes ... (elapsed 0.02 seconds) done.
[32146.188164] Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done.
[32146.188442] Suspending console(s) (use no_console_suspend to debug)
[32146.204192] pci 0000:00:02.0: power state changed by ACPI to D3
[32146.205313] btusb_intr_complete: hci0 urb ffff880076050a80 failed to resubmit (2)
[32147.128390] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[32147.128490] sd 0:0:0:0: [sda] Stopping disk
[32149.560300] ehci_hcd 0000:00:1d.7: PCI INT D disabled
[32149.579158] ehci_hcd 0000:00:1d.7: power state changed by ACPI to D3
[32149.579229] uhci_hcd 0000:00:1d.2: PCI INT C disabled
[32149.579291] uhci_hcd 0000:00:1d.1: PCI INT B disabled
[32149.579353] uhci_hcd 0000:00:1d.0: PCI INT A disabled
[32149.592859] HDA Intel 0000:00:1b.0: PCI INT B disabled
[32149.608130] ehci_hcd 0000:00:1a.7: PCI INT D disabled
[32149.626762] ehci_hcd 0000:00:1a.7: power state changed by ACPI to D3
[32149.626830] uhci_hcd 0000:00:1a.2: PCI INT C disabled
[32149.626894] uhci_hcd 0000:00:1a.1: PCI INT B disabled
[32149.626956] uhci_hcd 0000:00:1a.0: PCI INT A disabled
[32149.682920] e1000e 0000:00:19.0: PME# enabled
[32149.682939] e1000e 0000:00:19.0: wake-up capability enabled by ACPI
[32149.682946] e1000e 0000:00:19.0: PME# enabled
[32149.682950] e1000e 0000:00:19.0: wake-up capability enabled by ACPI
[32149.682959] e1000e 0000:00:19.0: PCI INT A disabled
[32149.701901] ACPI: Preparing to enter system sleep state S3
[32149.722419] Disabling non-boot CPUs ...
[32149.724661] CPU 1 is now offline
[32149.724665] SMP alternatives: switching to UP code
[32149.860398] CPU1 is down
[32149.860491] Extended CMOS year: 2000
[32149.860491] Back to C!
[32149.860491] Extended CMOS year: 2000
[32149.860491] Enabling non-boot CPUs ...
[32149.860491] SMP alternatives: switching to SMP code
[32149.966371] Booting processor 1 APIC 0x1 ip 0x6000
[32149.853824] Initializing CPU#1
[32149.853824] Calibrating delay using timer specific routine.. 4521.73 BogoMIPS (lpj=9043467)
[32149.853824] CPU: L1 I cache: 32K, L1 D cache: 32K
[32149.853824] CPU: L2 cache: 3072K
[32149.853824] CPU: Physical Processor ID: 0
[32149.853824] CPU: Processor Core ID: 1
[32150.056509] CPU1: Intel(R) Core(TM)2 Duo CPU P8400 @ 2.26GHz stepping 06
[32150.057012] Switched to high resolution mode on CPU 1
[32150.068312] CPU1 is up
[32150.068314] ACPI: Waking up from system sleep state S3
[32150.110797] ACPI: EC: non-query interrupt received, switching to interrupt mode
[32150.159596] pci 0000:00:02.0: restoring config space at offset 0x1 (was 0x900007, writing 0x900003)
[32150.163455] pci 0000:00:02.0: restoring config space at offset 0x1 (was 0x900403, writing 0x900003)
[32150.163483] pci 0000:00:02.1: restoring config space at offset 0x1 (was 0x900000, writing 0x900007)
[32150.163495] pci 0000:00:03.0: restoring config space at offset 0xf (was 0x100, writing 0x10b)
[32150.163507] pci 0000:00:03.0: restoring config space at offset 0x1 (was 0x100006, writing 0x180006)
[32150.176153] e1000e 0000:00:19.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[32150.176162] e1000e 0000:00:19.0: setting latency timer to 64
[32150.176171] e1000e 0000:00:19.0: wake-up capability disabled by ACPI
[32150.176178] e1000e 0000:00:19.0: PME# disabled
[32150.176182] e1000e 0000:00:19.0: wake-up capability disabled by ACPI
[32150.176189] e1000e 0000:00:19.0: PME# disabled
[32150.176239] e1000e 0000:00:19.0: irq 315 for MSI/MSI-X
[32150.237278] uhci_hcd 0000:00:1a.0: power state changed by ACPI to D0
[32150.237289] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[32150.237297] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[32150.237373] usb usb1: root hub lost power or was reset
[32150.237400] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[32150.237408] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[32150.237481] usb usb2: root hub lost power or was reset
[32150.238459] uhci_hcd 0000:00:1a.2: power state changed by ACPI to D0
[32150.238468] uhci_hcd 0000:00:1a.2: PCI INT C -> GSI 22 (level, low) -> IRQ 22
[32150.238476] uhci_hcd 0000:00:1a.2: setting latency timer to 64
[32150.238550] usb usb3: root hub lost power or was reset
[32150.239491] ehci_hcd 0000:00:1a.7: power state changed by ACPI to D0
[32150.239502] ehci_hcd 0000:00:1a.7: PCI INT D -> GSI 23 (level, low) -> IRQ 23
[32150.239510] ehci_hcd 0000:00:1a.7: setting latency timer to 64
[32150.252163] HDA Intel 0000:00:1b.0: restoring config space at offset 0x1 (was 0x100106, writing 0x100102)
[32150.252191] HDA Intel 0000:00:1b.0: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[32150.252201] HDA Intel 0000:00:1b.0: setting latency timer to 64
[32150.252252] pcieport-driver 0000:00:1c.0: restoring config space at offset 0x7 (was 0xf0, writing 0x200000f0)
[32150.252270] pcieport-driver 0000:00:1c.0: restoring config space at offset 0x1 (was 0x100107, writing 0x100507)
[32150.252320] pcieport-driver 0000:00:1c.0: setting latency timer to 64
[32150.252359] pcieport-driver 0000:00:1c.1: restoring config space at offset 0x7 (was 0xf0, writing 0x200000f0)
[32150.252377] pcieport-driver 0000:00:1c.1: restoring config space at offset 0x1 (was 0x100107, writing 0x100507)
[32150.252428] pcieport-driver 0000:00:1c.1: setting latency timer to 64
[32150.252476] pcieport-driver 0000:00:1c.3: restoring config space at offset 0x1 (was 0x100107, writing 0x100507)
[32150.252527] pcieport-driver 0000:00:1c.3: setting latency timer to 64
[32150.253409] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0
[32150.253418] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[32150.253426] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[32150.253500] usb usb4: root hub lost power or was reset
[32150.253524] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[32150.253532] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[32150.253605] usb usb5: root hub lost power or was reset
[32150.253629] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[32150.253637] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[32150.253710] usb usb6: root hub lost power or was reset
[32150.254581] ehci_hcd 0000:00:1d.7: power state changed by ACPI to D0
[32150.254592] ehci_hcd 0000:00:1d.7: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[32150.254600] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[32150.254684] pci 0000:00:1e.0: restoring config space at offset 0xf (was 0x40000, writing 0x400ff)
[32150.254701] pci 0000:00:1e.0: restoring config space at offset 0x9 (was 0x10001, writing 0x1fff1)
[32150.254710] pci 0000:00:1e.0: restoring config space at offset 0x8 (was 0x0, writing 0xfff0)
[32150.254718] pci 0000:00:1e.0: restoring config space at offset 0x7 (was 0x22800000, writing 0x228000f0)
[32150.254736] pci 0000:00:1e.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100107)
[32150.254757] pci 0000:00:1e.0: setting latency timer to 64
[32150.268135] ahci 0000:00:1f.2: restoring config space at offset 0x1 (was 0x2b00007, writing 0x2b00407)
[32150.268189] ahci 0000:00:1f.2: setting latency timer to 64
[32150.284121] vendor=8086 device=2942
[32150.284126] iwlagn 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[32150.284305] iwlagn 0000:03:00.0: irq 314 for MSI/MSI-X
[32150.303976] sd 0:0:0:0: [sda] Starting disk
[32150.322551] Registered led device: iwl-phy1:radio
[32150.322595] Registered led device: iwl-phy1:assoc
[32150.322638] Registered led device: iwl-phy1:RX
[32150.322680] Registered led device: iwl-phy1:TX
[32150.592127] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[32150.598890] ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 succeeded
[32150.599737] ata2.00: ACPI cmd e3/00:02:00:00:00:a0 succeeded
[32150.611434] ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 succeeded
[32150.612279] ata2.00: ACPI cmd e3/00:02:00:00:00:a0 succeeded
[32150.616078] ata2.00: configured for UDMA/133
[32151.654217] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[32151.741724] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 succeeded
[32151.741730] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 filtered out
[32151.741905] ata1.00: ACPI cmd ef/5f:00:00:00:00:a0 succeeded
[32151.741910] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 filtered out
[32151.752810] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 succeeded
[32151.752816] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 filtered out
[32151.752992] ata1.00: ACPI cmd ef/5f:00:00:00:00:a0 succeeded
[32151.752997] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 filtered out
[32151.753893] ata1.00: configured for UDMA/100
[32151.755820] ata1.00: configured for UDMA/100
[32151.772115] ata1: EH complete
[32151.772185] sd 0:0:0:0: [sda] 488397168 512-byte hardware sectors: (250 GB/232 GiB)
[32151.772216] sd 0:0:0:0: [sda] Write Protect is off
[32151.772221] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[32151.772266] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[32151.772313] sd 0:0:0:0: [sda] 488397168 512-byte hardware sectors: (250 GB/232 GiB)
[32151.772340] sd 0:0:0:0: [sda] Write Protect is off
[32151.772344] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[32151.772387] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[32151.880900] e1000e: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: RX/TX
[32151.880905] 0000:00:19.0: eth0: 10/100 speed: disabling TSO
[32153.148094] usb 7-6: reset high speed USB device using ehci_hcd and address 4
[32153.396075] usb 2-1: reset full speed USB device using uhci_hcd and address 3
[32153.656076] usb 2-2: reset full speed USB device using uhci_hcd and address 4
[32153.805340] pci 0000:00:02.0: power state changed by ACPI to D0
[32153.805373] pci 0000:00:02.0: restoring config space at offset 0x1 (was 0x900403, writing 0x900003)
[32153.805534] pci 0000:00:02.0: power state changed by ACPI to D0
[32153.805545] pci 0000:00:02.0: setting latency timer to 64
[32153.807884] pm_op(): usb_dev_resume+0x0/0x5 [usbcore] returns -19
[32153.807888] PM: Device 7-5 failed to resume: error -19
[32153.807928] pm_op(): usb_dev_resume+0x0/0x5 [usbcore] returns -19
[32153.807932] PM: Device 7-5.4 failed to resume: error -19
[32153.822623] Restarting tasks ... <6>usb 7-5: USB disconnect, address 7
[32153.822955] usb 7-5.4: USB disconnect, address 8
[32153.823489] usblp0: removed
[32153.897558] done.
[32157.884231] e1000e: eth0 NIC Link is Down
[32159.608936] e1000e: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: None
[32159.608945] 0000:00:19.0: eth0: 10/100 speed: disabling TSO
[32159.609725] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[32176.216139] eth0: no IPv6 routers present
[32182.827568] iwlagn: Radio Frequency Kill Switch is On:
[32182.827571] Kill switch must be turned off for wireless networking to work.
[32182.864230] usb 2-2: USB disconnect, address 4
[32182.866153] btusb_intr_complete: hci0 urb ffff880053c173c0 failed to resubmit (19)
[32182.866979] btusb_send_frame: hci0 urb ffff8800214b6f00 submission failed
[32199.232280] e1000e: eth0 NIC Link is Down
[32199.237689] ata2: exception Emask 0x10 SAct 0x0 SErr 0x4010000 action 0xe frozen
[32199.237695] ata2: irq_stat 0x00400040, connection status changed
[32199.237702] ata2: SError: { PHYRdyChg DevExch }
[32199.237716] ata2: hard resetting link
[32199.914073] thinkpad_acpi: unhandled HKEY event 0x6030
[32199.960067] ata2: SATA link down (SStatus 0 SControl 300)
[32202.308532] ata2: hard resetting link
[32202.324993] e1000e: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: None
[32202.325022] 0000:00:19.0: eth0: 10/100 speed: disabling TSO
[32202.325787] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[32202.628289] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[32202.635517] ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 succeeded
[32202.636519] ata2.00: ACPI cmd e3/00:02:00:00:00:a0 succeeded
[32202.649810] ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 succeeded
[32202.650804] ata2.00: ACPI cmd e3/00:02:00:00:00:a0 succeeded
[32202.655367] ata2.00: configured for UDMA/133
[32202.766112] ata2: exception Emask 0x10 SAct 0x0 SErr 0x0 action 0x9 t4
[32202.766120] ata2: irq_stat 0x40000001
[32202.766132] ata2.00: disabled
[32202.766142] ata2: hard resetting link
[32203.185801] thinkpad_acpi: unhandled HKEY event 0x6030
[32203.416120] usb 7-5: new high speed USB device using ehci_hcd and address 9
[32203.488074] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[32203.495633] ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 succeeded
[32203.496565] ata2.00: ACPI cmd e3/00:02:00:00:00:a0 succeeded
[32203.500585] ata2.00: ATAPI: HL-DT-ST DVDRAM GSA-U20N, HX10, max UDMA/133
[32203.508565] ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 succeeded
[32203.509489] ata2.00: ACPI cmd e3/00:02:00:00:00:a0 succeeded
[32203.513298] ata2.00: configured for UDMA/133
[32203.548711] usb 7-5: configuration #1 chosen from 1 choice
[32203.548921] hub 7-5:1.0: USB hub found
[32203.548981] hub 7-5:1.0: 4 ports detected
[32203.625857] ata2: EH complete
[32203.626100] ata2.00: detaching (SCSI 1:0:0:0)
[32203.629388] ACPI: \_SB_.GDCK - undocking
[32203.634172] ata2.00: exception Emask 0x10 SAct 0x0 SErr 0x4010000 action 0xe frozen
[32203.634180] ata2.00: irq_stat 0x00400040, connection status changed
[32203.634187] ata2: SError: { PHYRdyChg DevExch }
[32203.634200] ata2.00: cmd a0/00:00:00:02:00/00:00:00:00:00/a0 tag 0 pio 16388 in
[32203.634203] cdb 51 00 00 00 00 00 00 00 02 00 00 00 00 00 00 00
[32203.634206] res 51/24:03:00:00:00/00:00:00:00:00/a0 Emask 0x10 (ATA bus error)
[32203.634212] ata2.00: status: { DRDY ERR }
[32203.634226] ata2: hard resetting link
[32203.670815] ACPI: \_SB_.PCI0.SATA.PRT1 - docking
[32203.671137] ACPI: Unable to dock!
[32203.671476] ACPI: \_SB_.GDCK - docking
[32203.671762] usb 7-5: USB disconnect, address 9
[32204.209379] ACPI: Unable to dock!
[32204.492133] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[32204.499107] ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 succeeded
[32204.499998] ata2.00: ACPI cmd e3/00:02:00:00:00:a0 succeeded
[32204.511381] ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 succeeded
[32204.512241] ata2.00: ACPI cmd e3/00:02:00:00:00:a0 succeeded
[32204.516137] ata2.00: configured for UDMA/133
[32204.627765] ata2: EH complete
[32219.500153] eth0: no IPv6 routers present
[32221.534208] scsi 1:0:0:0: CD-ROM HL-DT-ST DVDRAM GSA-U20N HX10 PQ: 0 ANSI: 5
[32221.538468] sr0: scsi3-mmc drive: 62x/62x writer dvd-ram cd/rw xa/form2 cdda tray
[32221.538641] sr 1:0:0:0: Attached scsi CD-ROM sr0
[32221.538837] sr 1:0:0:0: Attached scsi generic sg1 type 5
[39624.096057] usb 2-2: new full speed USB device using uhci_hcd and address 5
[39624.263961] usb 2-2: configuration #1 chosen from 1 choice
[39625.524475] Registered led device: iwl-phy1:radio
[39625.524507] Registered led device: iwl-phy1:assoc
[39625.524525] Registered led device: iwl-phy1:RX
[39625.524544] Registered led device: iwl-phy1:TX
[39631.401640] wlan0: direct probe to AP 00:03:52:4d:bd:c1 try 1
[39631.406110] wlan0 direct probe responded
[39631.406116] wlan0: authenticate with AP 00:03:52:4d:bd:c1
[39631.604163] wlan0: authenticate with AP 00:03:52:4d:bd:c1
[39631.605962] wlan0: authenticated
[39631.605967] wlan0: associate with AP 00:03:52:4d:bd:c1
[39631.608147] wlan0: RX AssocResp from 00:03:52:4d:bd:c1 (capab=0x21 status=0 aid=10)
[39631.608153] wlan0: associated
[39631.612065] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[39642.380094] wlan0: no IPv6 routers present
[39645.060396] e1000e 0000:00:19.0: irq 315 for MSI/MSI-X
[39645.116179] e1000e 0000:00:19.0: irq 315 for MSI/MSI-X
[39645.117085] ADDRCONF(NETDEV_UP): eth0: link is not ready
[39646.688938] e1000e: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: RX/TX
[39646.688946] 0000:00:19.0: eth0: 10/100 speed: disabling TSO
[39646.689714] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[39651.510635] tun0: Disabled Privacy Extensions
[39660.393107] eth0: no IPv6 routers present
[39664.256789] tun0: Disabled Privacy Extensions
[39668.808229] e1000e: eth0 NIC Link is Down
[39668.815689] ata2: exception Emask 0x10 SAct 0x0 SErr 0x4010000 action 0xe frozen
[39668.815696] ata2: irq_stat 0x00400040, connection status changed
[39668.815702] ata2: SError: { PHYRdyChg DevExch }
[39668.815716] ata2: hard resetting link
[39669.485695] thinkpad_acpi: unhandled HKEY event 0x6030
[39669.536320] ata2: SATA link down (SStatus 0 SControl 300)
[39674.536272] ata2: hard resetting link
[39674.856285] ata2: SATA link down (SStatus 0 SControl 300)
[39679.856290] ata2: hard resetting link
[39680.176283] ata2: SATA link down (SStatus 0 SControl 300)
[39680.176297] ata2.00: disabled
[39680.176327] ata2: EH complete
[39680.176350] ata2.00: detaching (SCSI 1:0:0:0)
[39680.176395] ACPI: \_SB_.GDCK - undocking
[39680.206243] ACPI: \_SB_.PCI0.SATA.PRT1 - docking
[39680.206568] ACPI: Unable to dock!
[39780.682764] wlan0: deauthenticated (Reason: 2)
[39781.680275] wlan0: direct probe to AP 00:03:52:4d:bd:c1 try 1
[39781.880276] wlan0: direct probe to AP 00:03:52:4d:bd:c1 try 2
[39782.080276] wlan0: direct probe to AP 00:03:52:4d:bd:c1 try 3
[39782.280271] wlan0: direct probe to AP 00:03:52:4d:bd:c1 timed out
[39960.639480] wlan0: direct probe to AP 00:03:52:1c:12:11 try 1
[39960.836074] wlan0: direct probe to AP 00:03:52:1c:12:11 try 2
[39961.036289] wlan0: direct probe to AP 00:03:52:1c:12:11 try 3
[39961.038602] wlan0 direct probe responded
[39961.038610] wlan0: authenticate with AP 00:03:52:1c:12:11
[39961.236097] wlan0: authenticate with AP 00:03:52:1c:12:11
[39961.436297] wlan0: authenticate with AP 00:03:52:1c:12:11
[39961.439835] wlan0: authenticated
[39961.439843] wlan0: associate with AP 00:03:52:1c:12:11
[39961.636269] wlan0: associate with AP 00:03:52:1c:12:11
[39961.638592] wlan0: RX ReassocResp from 00:03:52:1c:12:11 (capab=0x421 status=0 aid=1)
[39961.638599] wlan0: associated
[41912.884264] wlan0: No ProbeResp from current AP 00:03:52:1c:12:11 - assume out of range
[42102.439437] ata2: exception Emask 0x10 SAct 0x0 SErr 0x4040000 action 0xe frozen
[42102.439445] ata2: irq_stat 0x00000040, connection status changed
[42102.439452] ata2: SError: { CommWake DevExch }
[42102.439469] ata2: hard resetting link
[42102.721044] e1000e: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: RX/TX
[42102.721054] 0000:00:19.0: eth0: 10/100 speed: disabling TSO
[42102.721838] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[42103.160287] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[42103.309644] thinkpad_acpi: unhandled HKEY event 0x6030
[42103.311923] ACPI: \_SB_.PCI0.SATA.PRT1 - docking
[42103.314824] ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 failed (Emask=0x100 Stat=0x00 Err=0x01)
[42103.406914] ACPI: \_SB_.GDCK - docking
[42103.441089] ata2: hard resetting link
[42103.548102] usb 7-5: new high speed USB device using ehci_hcd and address 11
[42103.681139] usb 7-5: configuration #1 chosen from 1 choice
[42103.681338] hub 7-5:1.0: USB hub found
[42103.681635] hub 7-5:1.0: 4 ports detected
[42103.760039] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[42103.766328] ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 succeeded
[42103.767167] ata2.00: ACPI cmd e3/00:02:00:00:00:a0 succeeded
[42103.778192] ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 succeeded
[42103.779034] ata2.00: ACPI cmd e3/00:02:00:00:00:a0 succeeded
[42103.782723] ata2.00: configured for UDMA/133
[42103.906079] ata2: exception Emask 0x10 SAct 0x0 SErr 0x0 action 0x9 t4
[42103.906086] ata2: irq_stat 0x40000001
[42103.914541] ata2.00: configured for UDMA/133
[42103.914548] ata2: EH complete
[42103.952194] usb 7-5.4: new full speed USB device using ehci_hcd and address 12
[42104.046152] usb 7-5.4: configuration #1 chosen from 1 choice
[42104.048388] usblp0: USB Bidirectional printer dev 12 if 0 alt 1 proto 2 vid 0x03F0 pid 0x0B17
[42118.356101] eth0: no IPv6 routers present
[42120.858107] hal_lpadmin[29319] general protection ip:44c404 sp:7fffa0a4bf60 error:0 in python2.5[400000+125000]
[42163.900878] vendor=8086 device=2942
[42163.900891] iwlagn 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[42163.901104] iwlagn 0000:03:00.0: irq 314 for MSI/MSI-X
[42163.927714] Registered led device: iwl-phy1:radio
[42163.927777] Registered led device: iwl-phy1:assoc
[42163.927825] Registered led device: iwl-phy1:RX
[42163.927869] Registered led device: iwl-phy1:TX
[42163.950262] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[50490.469268] RPC: Registered udp transport module.
[50490.469275] RPC: Registered tcp transport module.
[65537.060989] PM: Syncing filesystems ... done.
[65537.993057] Freezing user space processes ... (elapsed 0.01 seconds) done.
[65538.013249] Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done.
[65538.017376] Suspending console(s) (use no_console_suspend to debug)
[65538.019994] btusb_intr_complete: hci0 urb ffff880074cf5900 failed to resubmit (2)
[65538.288272] pci 0000:00:02.0: power state changed by ACPI to D3
[65538.964468] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[65538.964561] sd 0:0:0:0: [sda] Stopping disk
[65541.372223] ehci_hcd 0000:00:1d.7: PCI INT D disabled
[65541.388714] ehci_hcd 0000:00:1d.7: power state changed by ACPI to D3
[65541.388784] uhci_hcd 0000:00:1d.2: PCI INT C disabled
[65541.388847] uhci_hcd 0000:00:1d.1: PCI INT B disabled
[65541.388909] uhci_hcd 0000:00:1d.0: PCI INT A disabled
[65541.404671] HDA Intel 0000:00:1b.0: PCI INT B disabled
[65541.420190] ehci_hcd 0000:00:1a.7: PCI INT D disabled
[65541.436953] ehci_hcd 0000:00:1a.7: power state changed by ACPI to D3
[65541.437021] uhci_hcd 0000:00:1a.2: PCI INT C disabled
[65541.437083] uhci_hcd 0000:00:1a.1: PCI INT B disabled
[65541.437146] uhci_hcd 0000:00:1a.0: PCI INT A disabled
[65541.494921] e1000e 0000:00:19.0: PME# enabled
[65541.494940] e1000e 0000:00:19.0: wake-up capability enabled by ACPI
[65541.494947] e1000e 0000:00:19.0: PME# enabled
[65541.494951] e1000e 0000:00:19.0: wake-up capability enabled by ACPI
[65541.494961] e1000e 0000:00:19.0: PCI INT A disabled
[65541.513401] ACPI: Preparing to enter system sleep state S3
[65541.533572] Disabling non-boot CPUs ...
[65541.636023] CPU 1 is now offline
[65541.636027] SMP alternatives: switching to UP code
[65541.848316] CPU1 is down
[65541.848409] Extended CMOS year: 2000
[65541.848409] Back to C!
[65541.848409] Extended CMOS year: 2000
[65541.848409] Enabling non-boot CPUs ...
[65541.848409] SMP alternatives: switching to SMP code
[65541.973387] Booting processor 1 APIC 0x1 ip 0x6000
[65541.840152] Initializing CPU#1
[65541.840152] Calibrating delay using timer specific routine.. 4522.38 BogoMIPS (lpj=9044779)
[65541.840152] CPU: L1 I cache: 32K, L1 D cache: 32K
[65541.840152] CPU: L2 cache: 3072K
[65541.840152] CPU: Physical Processor ID: 0
[65541.840152] CPU: Processor Core ID: 1
[65542.064488] CPU1: Intel(R) Core(TM)2 Duo CPU P8400 @ 2.26GHz stepping 06
[65542.065011] Switched to high resolution mode on CPU 1
[65542.076304] CPU1 is up
[65542.076305] ACPI: Waking up from system sleep state S3
[65542.124445] ACPI: EC: non-query interrupt received, switching to interrupt mode
[65542.129115] thinkpad_acpi: unhandled HKEY event 0x6030
[65542.199762] ACPI: \_SB_.GDCK - undocking
[65542.224677] ACPI: \_SB_.PCI0.SATA.PRT1 - docking
[65542.224840] ACPI: Unable to dock!
[65542.234395] pci 0000:00:02.0: restoring config space at offset 0x1 (was 0x900007, writing 0x900403)
[65542.238743] pci 0000:00:02.1: restoring config space at offset 0x1 (was 0x900000, writing 0x900007)
[65542.238755] pci 0000:00:03.0: restoring config space at offset 0xf (was 0x100, writing 0x10b)
[65542.238767] pci 0000:00:03.0: restoring config space at offset 0x1 (was 0x100006, writing 0x180006)
[65542.252291] e1000e 0000:00:19.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[65542.252297] e1000e 0000:00:19.0: setting latency timer to 64
[65542.252302] e1000e 0000:00:19.0: wake-up capability disabled by ACPI
[65542.252306] e1000e 0000:00:19.0: PME# disabled
[65542.252309] e1000e 0000:00:19.0: wake-up capability disabled by ACPI
[65542.252313] e1000e 0000:00:19.0: PME# disabled
[65542.252346] e1000e 0000:00:19.0: irq 315 for MSI/MSI-X
[65542.308784] uhci_hcd 0000:00:1a.0: power state changed by ACPI to D0
[65542.308790] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[65542.308795] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[65542.308849] usb usb1: root hub lost power or was reset
[65542.308869] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[65542.308873] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[65542.308926] usb usb2: root hub lost power or was reset
[65542.309749] uhci_hcd 0000:00:1a.2: power state changed by ACPI to D0
[65542.309754] uhci_hcd 0000:00:1a.2: PCI INT C -> GSI 22 (level, low) -> IRQ 22
[65542.309759] uhci_hcd 0000:00:1a.2: setting latency timer to 64
[65542.309812] usb usb3: root hub lost power or was reset
[65542.310554] ehci_hcd 0000:00:1a.7: power state changed by ACPI to D0
[65542.310562] ehci_hcd 0000:00:1a.7: PCI INT D -> GSI 23 (level, low) -> IRQ 23
[65542.310567] ehci_hcd 0000:00:1a.7: setting latency timer to 64
[65542.324094] HDA Intel 0000:00:1b.0: restoring config space at offset 0x1 (was 0x100106, writing 0x100102)
[65542.324117] HDA Intel 0000:00:1b.0: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[65542.324123] HDA Intel 0000:00:1b.0: setting latency timer to 64
[65542.324169] pcieport-driver 0000:00:1c.0: restoring config space at offset 0x1 (was 0x100107, writing 0x100507)
[65542.324204] pcieport-driver 0000:00:1c.0: setting latency timer to 64
[65542.324236] pcieport-driver 0000:00:1c.1: restoring config space at offset 0x1 (was 0x100107, writing 0x100507)
[65542.324270] pcieport-driver 0000:00:1c.1: setting latency timer to 64
[65542.324303] pcieport-driver 0000:00:1c.3: restoring config space at offset 0x1 (was 0x100107, writing 0x100507)
[65542.324337] pcieport-driver 0000:00:1c.3: setting latency timer to 64
[65542.324819] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0
[65542.324824] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[65542.324828] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[65542.324882] usb usb4: root hub lost power or was reset
[65542.324901] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[65542.324906] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[65542.324959] usb usb5: root hub lost power or was reset
[65542.324977] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[65542.324981] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[65542.325035] usb usb6: root hub lost power or was reset
[65542.325707] ehci_hcd 0000:00:1d.7: power state changed by ACPI to D0
[65542.325715] ehci_hcd 0000:00:1d.7: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[65542.325721] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[65542.325781] pci 0000:00:1e.0: restoring config space at offset 0xf (was 0x40000, writing 0x400ff)
[65542.325792] pci 0000:00:1e.0: restoring config space at offset 0x9 (was 0x10001, writing 0x1fff1)
[65542.325797] pci 0000:00:1e.0: restoring config space at offset 0x8 (was 0x0, writing 0xfff0)
[65542.325802] pci 0000:00:1e.0: restoring config space at offset 0x7 (was 0x22800000, writing 0x228000f0)
[65542.325813] pci 0000:00:1e.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100107)
[65542.325826] pci 0000:00:1e.0: setting latency timer to 64
[65542.340095] ahci 0000:00:1f.2: restoring config space at offset 0x1 (was 0x2b00007, writing 0x2b00407)
[65542.340161] ahci 0000:00:1f.2: setting latency timer to 64
[65542.340236] ata2.00: disabled
[65542.356274] vendor=8086 device=2942
[65542.356283] iwlagn 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[65542.356468] iwlagn 0000:03:00.0: irq 314 for MSI/MSI-X
[65542.376156] sd 0:0:0:0: [sda] Starting disk
[65542.392692] Registered led device: iwl-phy1:radio
[65542.392736] Registered led device: iwl-phy1:assoc
[65542.392778] Registered led device: iwl-phy1:RX
[65542.392819] Registered led device: iwl-phy1:TX
[65542.661289] ata2: SATA link down (SStatus 0 SControl 300)
[65544.229272] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[65544.300655] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 succeeded
[65544.300662] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 filtered out
[65544.300797] ata1.00: ACPI cmd ef/5f:00:00:00:00:a0 succeeded
[65544.300803] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 filtered out
[65544.311615] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 succeeded
[65544.311622] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 filtered out
[65544.311731] ata1.00: ACPI cmd ef/5f:00:00:00:00:a0 succeeded
[65544.311738] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 filtered out
[65544.312734] ata1.00: configured for UDMA/100
[65544.314566] ata1.00: configured for UDMA/100
[65544.328278] ata1: EH complete
[65544.328370] sd 0:0:0:0: [sda] 488397168 512-byte hardware sectors: (250 GB/232 GiB)
[65544.328402] sd 0:0:0:0: [sda] Write Protect is off
[65544.328407] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[65544.328452] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[65544.328504] sd 0:0:0:0: [sda] 488397168 512-byte hardware sectors: (250 GB/232 GiB)
[65544.328531] sd 0:0:0:0: [sda] Write Protect is off
[65544.328535] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[65544.328580] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[65545.720316] usb 7-6: reset high speed USB device using ehci_hcd and address 4
[65545.968318] usb 2-1: reset full speed USB device using uhci_hcd and address 3
[65546.120765] pci 0000:00:02.0: power state changed by ACPI to D0
[65546.120955] pci 0000:00:02.0: power state changed by ACPI to D0
[65546.120967] pci 0000:00:02.0: setting latency timer to 64
[65546.232288] usb 2-2: reset full speed USB device using uhci_hcd and address 5
[65546.385627] pm_op(): usb_dev_resume+0x0/0x5 [usbcore] returns -19
[65546.385634] PM: Device 7-5 failed to resume: error -19
[65546.385671] pm_op(): usb_dev_resume+0x0/0x5 [usbcore] returns -19
[65546.385675] PM: Device 7-5.4 failed to resume: error -19
[65546.403084] Restarting tasks ... <6>usb 7-5: USB disconnect, address 11
[65546.403422] usb 7-5.4: USB disconnect, address 12
[65546.403940] usblp0: removed
[65546.439663] done.
[66165.586797] PM: Syncing filesystems ... done.
[66166.898139] Freezing user space processes ... (elapsed 0.01 seconds) done.
[66166.917241] Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done.
[66166.922344] Suspending console(s) (use no_console_suspend to debug)
[66166.924394] btusb_intr_complete: hci0 urb ffff8800165f6180 failed to resubmit (2)
[66167.188438] pci 0000:00:02.0: power state changed by ACPI to D3
[66167.864647] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[66167.865279] sd 0:0:0:0: [sda] Stopping disk
[66170.312458] ehci_hcd 0000:00:1d.7: PCI INT D disabled
[66170.329442] ehci_hcd 0000:00:1d.7: power state changed by ACPI to D3
[66170.329522] uhci_hcd 0000:00:1d.2: PCI INT C disabled
[66170.329586] uhci_hcd 0000:00:1d.1: PCI INT B disabled
[66170.329649] uhci_hcd 0000:00:1d.0: PCI INT A disabled
[66170.329855] HDA Intel 0000:00:1b.0: PCI INT B disabled
[66170.344259] ehci_hcd 0000:00:1a.7: PCI INT D disabled
[66170.361480] ehci_hcd 0000:00:1a.7: power state changed by ACPI to D3
[66170.361558] uhci_hcd 0000:00:1a.2: PCI INT C disabled
[66170.361622] uhci_hcd 0000:00:1a.1: PCI INT B disabled
[66170.361685] uhci_hcd 0000:00:1a.0: PCI INT A disabled
[66170.419151] e1000e 0000:00:19.0: PME# enabled
[66170.419183] e1000e 0000:00:19.0: wake-up capability enabled by ACPI
[66170.419191] e1000e 0000:00:19.0: PME# enabled
[66170.419195] e1000e 0000:00:19.0: wake-up capability enabled by ACPI
[66170.419206] e1000e 0000:00:19.0: PCI INT A disabled
[66170.437915] ACPI: Preparing to enter system sleep state S3
[66170.456987] Disabling non-boot CPUs ...
[66170.560023] CPU 1 is now offline
[66170.560027] SMP alternatives: switching to UP code
[66170.748183] CPU1 is down
[66170.748278] Extended CMOS year: 2000
[66170.748278] Back to C!
[66170.748278] Extended CMOS year: 2000
[66170.748278] Enabling non-boot CPUs ...
[66170.748278] SMP alternatives: switching to SMP code
[66170.872893] Booting processor 1 APIC 0x1 ip 0x6000
[66170.735904] Initializing CPU#1
[66170.735904] Calibrating delay using timer specific routine.. 4522.04 BogoMIPS (lpj=9044099)
[66170.735904] CPU: L1 I cache: 32K, L1 D cache: 32K
[66170.735904] CPU: L2 cache: 3072K
[66170.735904] CPU: Physical Processor ID: 0
[66170.735904] CPU: Processor Core ID: 1
[66170.960471] CPU1: Intel(R) Core(TM)2 Duo CPU P8400 @ 2.26GHz stepping 06
[66170.961011] Switched to high resolution mode on CPU 1
[66170.972302] CPU1 is up
[66170.972304] ACPI: Waking up from system sleep state S3
[66171.009731] ACPI: EC: non-query interrupt received, switching to interrupt mode
[66171.061037] pci 0000:00:02.0: restoring config space at offset 0x1 (was 0x900007, writing 0x900403)
[66171.064932] pci 0000:00:02.1: restoring config space at offset 0x1 (was 0x900000, writing 0x900007)
[66171.064944] pci 0000:00:03.0: restoring config space at offset 0xf (was 0x100, writing 0x10b)
[66171.064956] pci 0000:00:03.0: restoring config space at offset 0x1 (was 0x100006, writing 0x180006)
[66171.080089] e1000e 0000:00:19.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[66171.080094] e1000e 0000:00:19.0: setting latency timer to 64
[66171.080099] e1000e 0000:00:19.0: wake-up capability disabled by ACPI
[66171.080103] e1000e 0000:00:19.0: PME# disabled
[66171.080105] e1000e 0000:00:19.0: wake-up capability disabled by ACPI
[66171.080109] e1000e 0000:00:19.0: PME# disabled
[66171.080142] e1000e 0000:00:19.0: irq 315 for MSI/MSI-X
[66171.137262] uhci_hcd 0000:00:1a.0: power state changed by ACPI to D0
[66171.137277] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[66171.137286] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[66171.137363] usb usb1: root hub lost power or was reset
[66171.137391] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[66171.137399] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[66171.137472] usb usb2: root hub lost power or was reset
[66171.138160] uhci_hcd 0000:00:1a.2: power state changed by ACPI to D0
[66171.138169] uhci_hcd 0000:00:1a.2: PCI INT C -> GSI 22 (level, low) -> IRQ 22
[66171.138177] uhci_hcd 0000:00:1a.2: setting latency timer to 64
[66171.138251] usb usb3: root hub lost power or was reset
[66171.139157] ehci_hcd 0000:00:1a.7: power state changed by ACPI to D0
[66171.139169] ehci_hcd 0000:00:1a.7: PCI INT D -> GSI 23 (level, low) -> IRQ 23
[66171.139177] ehci_hcd 0000:00:1a.7: setting latency timer to 64
[66171.152317] HDA Intel 0000:00:1b.0: restoring config space at offset 0x1 (was 0x100106, writing 0x100102)
[66171.152352] HDA Intel 0000:00:1b.0: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[66171.152363] HDA Intel 0000:00:1b.0: setting latency timer to 64
[66171.152434] pcieport-driver 0000:00:1c.0: restoring config space at offset 0x1 (was 0x100107, writing 0x100507)
[66171.152485] pcieport-driver 0000:00:1c.0: setting latency timer to 64
[66171.152535] pcieport-driver 0000:00:1c.1: restoring config space at offset 0x1 (was 0x100107, writing 0x100507)
[66171.152586] pcieport-driver 0000:00:1c.1: setting latency timer to 64
[66171.152635] pcieport-driver 0000:00:1c.3: restoring config space at offset 0x1 (was 0x100107, writing 0x100507)
[66171.152685] pcieport-driver 0000:00:1c.3: setting latency timer to 64
[66171.153649] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0
[66171.153659] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[66171.153667] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[66171.153741] usb usb4: root hub lost power or was reset
[66171.153767] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[66171.153775] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[66171.153848] usb usb5: root hub lost power or was reset
[66171.153872] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[66171.153879] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[66171.153952] usb usb6: root hub lost power or was reset
[66171.154650] ehci_hcd 0000:00:1d.7: power state changed by ACPI to D0
[66171.154661] ehci_hcd 0000:00:1d.7: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[66171.154669] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[66171.154753] pci 0000:00:1e.0: restoring config space at offset 0xf (was 0x40000, writing 0x400ff)
[66171.154771] pci 0000:00:1e.0: restoring config space at offset 0x9 (was 0x10001, writing 0x1fff1)
[66171.154779] pci 0000:00:1e.0: restoring config space at offset 0x8 (was 0x0, writing 0xfff0)
[66171.154788] pci 0000:00:1e.0: restoring config space at offset 0x7 (was 0x22800000, writing 0x228000f0)
[66171.154805] pci 0000:00:1e.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100107)
[66171.154827] pci 0000:00:1e.0: setting latency timer to 64
[66171.168089] ahci 0000:00:1f.2: restoring config space at offset 0x1 (was 0x2b00007, writing 0x2b00407)
[66171.168142] ahci 0000:00:1f.2: setting latency timer to 64
[66171.184273] vendor=8086 device=2942
[66171.184282] iwlagn 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[66171.184467] iwlagn 0000:03:00.0: irq 314 for MSI/MSI-X
[66171.204190] sd 0:0:0:0: [sda] Starting disk
[66171.220669] Registered led device: iwl-phy1:radio
[66171.220713] Registered led device: iwl-phy1:assoc
[66171.220756] Registered led device: iwl-phy1:RX
[66171.220797] Registered led device: iwl-phy1:TX
[66171.492275] ata2: SATA link down (SStatus 0 SControl 300)
[66172.833275] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[66172.889638] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 succeeded
[66172.889646] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 filtered out
[66172.889766] ata1.00: ACPI cmd ef/5f:00:00:00:00:a0 succeeded
[66172.889772] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 filtered out
[66172.900716] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 succeeded
[66172.900723] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 filtered out
[66172.900827] ata1.00: ACPI cmd ef/5f:00:00:00:00:a0 succeeded
[66172.900832] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 filtered out
[66172.901656] ata1.00: configured for UDMA/100
[66172.903758] ata1.00: configured for UDMA/100
[66172.917276] ata1: EH complete
[66172.917365] sd 0:0:0:0: [sda] 488397168 512-byte hardware sectors: (250 GB/232 GiB)
[66172.917398] sd 0:0:0:0: [sda] Write Protect is off
[66172.917402] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[66172.917448] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[66172.917500] sd 0:0:0:0: [sda] 488397168 512-byte hardware sectors: (250 GB/232 GiB)
[66172.917528] sd 0:0:0:0: [sda] Write Protect is off
[66172.917532] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[66172.917576] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[66174.308316] usb 7-6: reset high speed USB device using ehci_hcd and address 4
[66174.556282] usb 2-1: reset full speed USB device using uhci_hcd and address 3
[66174.708768] pci 0000:00:02.0: power state changed by ACPI to D0
[66174.708958] pci 0000:00:02.0: power state changed by ACPI to D0
[66174.708970] pci 0000:00:02.0: setting latency timer to 64
[66174.820278] usb 2-2: reset full speed USB device using uhci_hcd and address 5
[66174.989915] Restarting tasks ... done.
[66176.050070] elantech.c: unexpected magic knock result 0x00, 0x02, 0x64.
[66176.356927] IBM TrackPoint firmware: 0x0e, buttons: 3/3
[66176.377059] input: TPPS/2 IBM TrackPoint as /class/input/input9
[66736.533760] PM: Syncing filesystems ... done.
[66737.214084] Freezing user space processes ... (elapsed 0.02 seconds) done.
[66737.237242] Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done.
[66737.240522] Suspending console(s) (use no_console_suspend to debug)
[66737.243373] btusb_intr_complete: hci0 urb ffff8800179fc180 failed to resubmit (2)
[66737.508438] pci 0000:00:02.0: power state changed by ACPI to D3
[66738.184493] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[66738.185056] sd 0:0:0:0: [sda] Stopping disk
[66740.584450] ehci_hcd 0000:00:1d.7: PCI INT D disabled
[66740.601376] ehci_hcd 0000:00:1d.7: power state changed by ACPI to D3
[66740.601456] uhci_hcd 0000:00:1d.2: PCI INT C disabled
[66740.601519] uhci_hcd 0000:00:1d.1: PCI INT B disabled
[66740.601582] uhci_hcd 0000:00:1d.0: PCI INT A disabled
[66740.601788] HDA Intel 0000:00:1b.0: PCI INT B disabled
[66740.616255] ehci_hcd 0000:00:1a.7: PCI INT D disabled
[66740.633451] ehci_hcd 0000:00:1a.7: power state changed by ACPI to D3
[66740.633530] uhci_hcd 0000:00:1a.2: PCI INT C disabled
[66740.633594] uhci_hcd 0000:00:1a.1: PCI INT B disabled
[66740.633658] uhci_hcd 0000:00:1a.0: PCI INT A disabled
[66740.691103] e1000e 0000:00:19.0: PME# enabled
[66740.691136] e1000e 0000:00:19.0: wake-up capability enabled by ACPI
[66740.691144] e1000e 0000:00:19.0: PME# enabled
[66740.691148] e1000e 0000:00:19.0: wake-up capability enabled by ACPI
[66740.691159] e1000e 0000:00:19.0: PCI INT A disabled
[66740.709628] ACPI: Preparing to enter system sleep state S3
[66740.727907] Disabling non-boot CPUs ...
[66740.730031] CPU 1 is now offline
[66740.730035] SMP alternatives: switching to UP code
[66740.904336] CPU1 is down
[66740.904429] Extended CMOS year: 2000
[66740.904429] Back to C!
[66740.904429] Extended CMOS year: 2000
[66740.904429] Enabling non-boot CPUs ...
[66740.904429] SMP alternatives: switching to SMP code
[66741.029228] Booting processor 1 APIC 0x1 ip 0x6000
[66740.899814] Initializing CPU#1
[66740.899814] Calibrating delay using timer specific routine.. 4522.04 BogoMIPS (lpj=9044083)
[66740.899814] CPU: L1 I cache: 32K, L1 D cache: 32K
[66740.899814] CPU: L2 cache: 3072K
[66740.899814] CPU: Physical Processor ID: 0
[66740.899814] CPU: Processor Core ID: 1
[66741.120471] CPU1: Intel(R) Core(TM)2 Duo CPU P8400 @ 2.26GHz stepping 06
[66741.121011] Switched to high resolution mode on CPU 1
[66741.132302] CPU1 is up
[66741.132304] ACPI: Waking up from system sleep state S3
[66741.171018] ACPI: EC: non-query interrupt received, switching to interrupt mode
[66741.222873] pci 0000:00:02.0: restoring config space at offset 0x1 (was 0x900007, writing 0x900403)
[66741.226778] pci 0000:00:02.1: restoring config space at offset 0x1 (was 0x900000, writing 0x900007)
[66741.226791] pci 0000:00:03.0: restoring config space at offset 0xf (was 0x100, writing 0x10b)
[66741.226803] pci 0000:00:03.0: restoring config space at offset 0x1 (was 0x100006, writing 0x180006)
[66741.240290] e1000e 0000:00:19.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[66741.240296] e1000e 0000:00:19.0: setting latency timer to 64
[66741.240301] e1000e 0000:00:19.0: wake-up capability disabled by ACPI
[66741.240306] e1000e 0000:00:19.0: PME# disabled
[66741.240308] e1000e 0000:00:19.0: wake-up capability disabled by ACPI
[66741.240312] e1000e 0000:00:19.0: PME# disabled
[66741.240345] e1000e 0000:00:19.0: irq 315 for MSI/MSI-X
[66741.297714] uhci_hcd 0000:00:1a.0: power state changed by ACPI to D0
[66741.297730] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[66741.297739] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[66741.297817] usb usb1: root hub lost power or was reset
[66741.297847] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[66741.297854] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[66741.297927] usb usb2: root hub lost power or was reset
[66741.298709] uhci_hcd 0000:00:1a.2: power state changed by ACPI to D0
[66741.298718] uhci_hcd 0000:00:1a.2: PCI INT C -> GSI 22 (level, low) -> IRQ 22
[66741.298726] uhci_hcd 0000:00:1a.2: setting latency timer to 64
[66741.298800] usb usb3: root hub lost power or was reset
[66741.299624] ehci_hcd 0000:00:1a.7: power state changed by ACPI to D0
[66741.299635] ehci_hcd 0000:00:1a.7: PCI INT D -> GSI 23 (level, low) -> IRQ 23
[66741.299643] ehci_hcd 0000:00:1a.7: setting latency timer to 64
[66741.312173] HDA Intel 0000:00:1b.0: restoring config space at offset 0x1 (was 0x100106, writing 0x100102)
[66741.312202] HDA Intel 0000:00:1b.0: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[66741.312212] HDA Intel 0000:00:1b.0: setting latency timer to 64
[66741.312279] pcieport-driver 0000:00:1c.0: restoring config space at offset 0x1 (was 0x100107, writing 0x100507)
[66741.312331] pcieport-driver 0000:00:1c.0: setting latency timer to 64
[66741.312381] pcieport-driver 0000:00:1c.1: restoring config space at offset 0x1 (was 0x100107, writing 0x100507)
[66741.312431] pcieport-driver 0000:00:1c.1: setting latency timer to 64
[66741.312480] pcieport-driver 0000:00:1c.3: restoring config space at offset 0x1 (was 0x100107, writing 0x100507)
[66741.312530] pcieport-driver 0000:00:1c.3: setting latency timer to 64
[66741.313501] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0
[66741.313510] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[66741.313518] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[66741.313592] usb usb4: root hub lost power or was reset
[66741.313617] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[66741.313625] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[66741.313698] usb usb5: root hub lost power or was reset
[66741.313722] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[66741.313730] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[66741.313803] usb usb6: root hub lost power or was reset
[66741.314602] ehci_hcd 0000:00:1d.7: power state changed by ACPI to D0
[66741.314613] ehci_hcd 0000:00:1d.7: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[66741.314622] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[66741.314706] pci 0000:00:1e.0: restoring config space at offset 0xf (was 0x40000, writing 0x400ff)
[66741.314723] pci 0000:00:1e.0: restoring config space at offset 0x9 (was 0x10001, writing 0x1fff1)
[66741.314732] pci 0000:00:1e.0: restoring config space at offset 0x8 (was 0x0, writing 0xfff0)
[66741.314740] pci 0000:00:1e.0: restoring config space at offset 0x7 (was 0x22800000, writing 0x228000f0)
[66741.314758] pci 0000:00:1e.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100107)
[66741.314779] pci 0000:00:1e.0: setting latency timer to 64
[66741.328088] ahci 0000:00:1f.2: restoring config space at offset 0x1 (was 0x2b00007, writing 0x2b00407)
[66741.328142] ahci 0000:00:1f.2: setting latency timer to 64
[66741.344118] vendor=8086 device=2942
[66741.344123] iwlagn 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[66741.344307] iwlagn 0000:03:00.0: irq 314 for MSI/MSI-X
[66741.364031] sd 0:0:0:0: [sda] Starting disk
[66741.380815] Registered led device: iwl-phy1:radio
[66741.380860] Registered led device: iwl-phy1:assoc
[66741.380904] Registered led device: iwl-phy1:RX
[66741.380947] Registered led device: iwl-phy1:TX
[66741.649282] ata2: SATA link down (SStatus 0 SControl 300)
[66743.273280] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[66743.325955] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 succeeded
[66743.325963] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 filtered out
[66743.326108] ata1.00: ACPI cmd ef/5f:00:00:00:00:a0 succeeded
[66743.326115] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 filtered out
[66743.336900] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 succeeded
[66743.336907] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 filtered out
[66743.337013] ata1.00: ACPI cmd ef/5f:00:00:00:00:a0 succeeded
[66743.337019] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 filtered out
[66743.338044] ata1.00: configured for UDMA/100
[66743.340367] ata1.00: configured for UDMA/100
[66743.356126] ata1: EH complete
[66743.356216] sd 0:0:0:0: [sda] 488397168 512-byte hardware sectors: (250 GB/232 GiB)
[66743.356248] sd 0:0:0:0: [sda] Write Protect is off
[66743.356253] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[66743.356298] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[66743.356349] sd 0:0:0:0: [sda] 488397168 512-byte hardware sectors: (250 GB/232 GiB)
[66743.356376] sd 0:0:0:0: [sda] Write Protect is off
[66743.356380] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[66743.356425] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[66744.732287] usb 7-6: reset high speed USB device using ehci_hcd and address 4
[66744.980316] usb 2-1: reset full speed USB device using uhci_hcd and address 3
[66745.131798] pci 0000:00:02.0: power state changed by ACPI to D0
[66745.131988] pci 0000:00:02.0: power state changed by ACPI to D0
[66745.132000] pci 0000:00:02.0: setting latency timer to 64
[66745.244317] usb 2-2: reset full speed USB device using uhci_hcd and address 5
[66745.412876] Restarting tasks ... done.
[66746.491041] elantech.c: unexpected magic knock result 0x00, 0x02, 0x64.
[66746.798380] IBM TrackPoint firmware: 0x0e, buttons: 3/3
[66746.817598] input: TPPS/2 IBM TrackPoint as /class/input/input10
[68335.237787] PM: Syncing filesystems ... done.
[68336.034302] Freezing user space processes ... (elapsed 0.01 seconds) done.
[68336.053181] Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done.
[68336.057257] Suspending console(s) (use no_console_suspend to debug)
[68336.059536] btusb_intr_complete: hci0 urb ffff880065c7e480 failed to resubmit (2)
[68336.324438] pci 0000:00:02.0: power state changed by ACPI to D3
[68336.996457] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[68336.996955] sd 0:0:0:0: [sda] Stopping disk
[68339.384271] ehci_hcd 0000:00:1d.7: PCI INT D disabled
[68339.402071] ehci_hcd 0000:00:1d.7: power state changed by ACPI to D3
[68339.402150] uhci_hcd 0000:00:1d.2: PCI INT C disabled
[68339.402214] uhci_hcd 0000:00:1d.1: PCI INT B disabled
[68339.402277] uhci_hcd 0000:00:1d.0: PCI INT A disabled
[68339.402483] HDA Intel 0000:00:1b.0: PCI INT B disabled
[68339.416208] ehci_hcd 0000:00:1a.7: PCI INT D disabled
[68339.432962] ehci_hcd 0000:00:1a.7: power state changed by ACPI to D3
[68339.433034] uhci_hcd 0000:00:1a.2: PCI INT C disabled
[68339.433098] uhci_hcd 0000:00:1a.1: PCI INT B disabled
[68339.433160] uhci_hcd 0000:00:1a.0: PCI INT A disabled
[68339.491101] e1000e 0000:00:19.0: PME# enabled
[68339.491133] e1000e 0000:00:19.0: wake-up capability enabled by ACPI
[68339.491141] e1000e 0000:00:19.0: PME# enabled
[68339.491145] e1000e 0000:00:19.0: wake-up capability enabled by ACPI
[68339.491156] e1000e 0000:00:19.0: PCI INT A disabled
[68339.510331] ACPI: Preparing to enter system sleep state S3
[68339.530635] Disabling non-boot CPUs ...
[68339.532750] CPU 1 is now offline
[68339.532753] SMP alternatives: switching to UP code
[68339.704335] CPU1 is down
[68339.704429] Extended CMOS year: 2000
[68339.704429] Back to C!
[68339.704429] Extended CMOS year: 2000
[68339.704429] Enabling non-boot CPUs ...
[68339.704429] SMP alternatives: switching to SMP code
[68339.829550] Booting processor 1 APIC 0x1 ip 0x6000
[68339.701654] Initializing CPU#1
[68339.701654] Calibrating delay using timer specific routine.. 4522.01 BogoMIPS (lpj=9044037)
[68339.701654] CPU: L1 I cache: 32K, L1 D cache: 32K
[68339.701654] CPU: L2 cache: 3072K
[68339.701654] CPU: Physical Processor ID: 0
[68339.701654] CPU: Processor Core ID: 1
[68339.920475] CPU1: Intel(R) Core(TM)2 Duo CPU P8400 @ 2.26GHz stepping 06
[68339.921011] Switched to high resolution mode on CPU 1
[68339.932304] CPU1 is up
[68339.932306] ACPI: Waking up from system sleep state S3
[68339.971004] ACPI: EC: non-query interrupt received, switching to interrupt mode
[68340.022346] pci 0000:00:02.0: restoring config space at offset 0x1 (was 0x900007, writing 0x900403)
[68340.025772] pci 0000:00:02.1: restoring config space at offset 0x1 (was 0x900000, writing 0x900007)
[68340.025785] pci 0000:00:03.0: restoring config space at offset 0xf (was 0x100, writing 0x10b)
[68340.025797] pci 0000:00:03.0: restoring config space at offset 0x1 (was 0x100006, writing 0x180006)
[68340.040080] e1000e 0000:00:19.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[68340.040085] e1000e 0000:00:19.0: setting latency timer to 64
[68340.040090] e1000e 0000:00:19.0: wake-up capability disabled by ACPI
[68340.040095] e1000e 0000:00:19.0: PME# disabled
[68340.040097] e1000e 0000:00:19.0: wake-up capability disabled by ACPI
[68340.040100] e1000e 0000:00:19.0: PME# disabled
[68340.040133] e1000e 0000:00:19.0: irq 315 for MSI/MSI-X
[68340.097225] uhci_hcd 0000:00:1a.0: power state changed by ACPI to D0
[68340.097234] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[68340.097243] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[68340.097318] usb usb1: root hub lost power or was reset
[68340.097345] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[68340.097353] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[68340.097426] usb usb2: root hub lost power or was reset
[68340.098449] uhci_hcd 0000:00:1a.2: power state changed by ACPI to D0
[68340.098457] uhci_hcd 0000:00:1a.2: PCI INT C -> GSI 22 (level, low) -> IRQ 22
[68340.098465] uhci_hcd 0000:00:1a.2: setting latency timer to 64
[68340.098539] usb usb3: root hub lost power or was reset
[68340.099403] ehci_hcd 0000:00:1a.7: power state changed by ACPI to D0
[68340.099414] ehci_hcd 0000:00:1a.7: PCI INT D -> GSI 23 (level, low) -> IRQ 23
[68340.099422] ehci_hcd 0000:00:1a.7: setting latency timer to 64
[68340.112201] HDA Intel 0000:00:1b.0: restoring config space at offset 0x1 (was 0x100106, writing 0x100102)
[68340.112236] HDA Intel 0000:00:1b.0: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[68340.112246] HDA Intel 0000:00:1b.0: setting latency timer to 64
[68340.112317] pcieport-driver 0000:00:1c.0: restoring config space at offset 0x1 (was 0x100107, writing 0x100507)
[68340.112368] pcieport-driver 0000:00:1c.0: setting latency timer to 64
[68340.112418] pcieport-driver 0000:00:1c.1: restoring config space at offset 0x1 (was 0x100107, writing 0x100507)
[68340.112469] pcieport-driver 0000:00:1c.1: setting latency timer to 64
[68340.112518] pcieport-driver 0000:00:1c.3: restoring config space at offset 0x1 (was 0x100107, writing 0x100507)
[68340.112568] pcieport-driver 0000:00:1c.3: setting latency timer to 64
[68340.113294] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0
[68340.113303] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[68340.113311] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[68340.113386] usb usb4: root hub lost power or was reset
[68340.113411] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[68340.113419] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[68340.113493] usb usb5: root hub lost power or was reset
[68340.113517] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[68340.113524] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[68340.113597] usb usb6: root hub lost power or was reset
[68340.114520] ehci_hcd 0000:00:1d.7: power state changed by ACPI to D0
[68340.114531] ehci_hcd 0000:00:1d.7: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[68340.114540] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[68340.114624] pci 0000:00:1e.0: restoring config space at offset 0xf (was 0x40000, writing 0x400ff)
[68340.114641] pci 0000:00:1e.0: restoring config space at offset 0x9 (was 0x10001, writing 0x1fff1)
[68340.114650] pci 0000:00:1e.0: restoring config space at offset 0x8 (was 0x0, writing 0xfff0)
[68340.114658] pci 0000:00:1e.0: restoring config space at offset 0x7 (was 0x22800000, writing 0x228000f0)
[68340.114676] pci 0000:00:1e.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100107)
[68340.114697] pci 0000:00:1e.0: setting latency timer to 64
[68340.128158] ahci 0000:00:1f.2: restoring config space at offset 0x1 (was 0x2b00007, writing 0x2b00407)
[68340.128211] ahci 0000:00:1f.2: setting latency timer to 64
[68340.144275] vendor=8086 device=2942
[68340.144283] iwlagn 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[68340.144470] iwlagn 0000:03:00.0: irq 314 for MSI/MSI-X
[68340.164187] sd 0:0:0:0: [sda] Starting disk
[68340.180662] Registered led device: iwl-phy1:radio
[68340.180707] Registered led device: iwl-phy1:assoc
[68340.180750] Registered led device: iwl-phy1:RX
[68340.180793] Registered led device: iwl-phy1:TX
[68340.449274] ata2: SATA link down (SStatus 0 SControl 300)
[68342.129279] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[68342.215856] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 succeeded
[68342.215864] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 filtered out
[68342.216197] ata1.00: ACPI cmd ef/5f:00:00:00:00:a0 succeeded
[68342.216204] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 filtered out
[68342.226940] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 succeeded
[68342.226947] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 filtered out
[68342.227265] ata1.00: ACPI cmd ef/5f:00:00:00:00:a0 succeeded
[68342.227272] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 filtered out
[68342.228094] ata1.00: configured for UDMA/100
[68342.229986] ata1.00: configured for UDMA/100
[68342.244268] ata1: EH complete
[68342.244361] sd 0:0:0:0: [sda] 488397168 512-byte hardware sectors: (250 GB/232 GiB)
[68342.244394] sd 0:0:0:0: [sda] Write Protect is off
[68342.244398] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[68342.244444] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[68342.244496] sd 0:0:0:0: [sda] 488397168 512-byte hardware sectors: (250 GB/232 GiB)
[68342.244523] sd 0:0:0:0: [sda] Write Protect is off
[68342.244527] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[68342.244572] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[68343.624317] usb 7-6: reset high speed USB device using ehci_hcd and address 4
[68343.872287] usb 2-1: reset full speed USB device using uhci_hcd and address 3
[68344.023792] pci 0000:00:02.0: power state changed by ACPI to D0
[68344.023980] pci 0000:00:02.0: power state changed by ACPI to D0
[68344.023993] pci 0000:00:02.0: setting latency timer to 64
[68344.136320] usb 2-2: reset full speed USB device using uhci_hcd and address 5
[68344.305916] Restarting tasks ... done.
[68345.361394] elantech.c: unexpected magic knock result 0x00, 0x02, 0x64.
[68345.663812] IBM TrackPoint firmware: 0x0e, buttons: 3/3
[68345.682196] input: TPPS/2 IBM TrackPoint as /class/input/input11
[68489.268054] usb 7-1: new high speed USB device using ehci_hcd and address 13
[68489.414122] usb 7-1: configuration #1 chosen from 1 choice
[68489.740123] usbcore: registered new interface driver libusual
[68489.808886] Initializing USB Mass Storage driver...
[68489.815721] usb-storage: probe of 7-1:1.0 failed with error -5
[68489.815779] usbcore: registered new interface driver usb-storage
[68489.815785] USB Mass Storage support registered.
[68489.818423] usb 7-1: USB disconnect, address 13
[68490.076140] usb 7-1: new high speed USB device using ehci_hcd and address 14
[68490.221747] usb 7-1: configuration #1 chosen from 1 choice
[68490.276105] scsi5 : SCSI emulation for USB Mass Storage devices
[68490.276549] usb-storage: device found at 14
[68490.276553] usb-storage: waiting for device to settle before scanning
[68490.455842] usbcore: registered new interface driver usbserial
[68490.455845] usbserial: USB Serial Driver core
[68490.458869] USB Serial support registered for Sierra USB modem
[68490.458897] sierra 7-1:1.0: Sierra USB modem converter detected
[68490.459373] usb 7-1: Sierra USB modem converter now attached to ttyUSB0
[68490.459383] sierra 7-1:1.1: Sierra USB modem converter detected
[68490.460229] usb 7-1: Sierra USB modem converter now attached to ttyUSB1
[68490.460242] sierra 7-1:1.2: Sierra USB modem converter detected
[68490.461046] usb 7-1: Sierra USB modem converter now attached to ttyUSB2
[68490.461056] sierra 7-1:1.3: Sierra USB modem converter detected
[68490.462044] usb 7-1: Sierra USB modem converter now attached to ttyUSB3
[68490.462054] sierra 7-1:1.4: Sierra USB modem converter detected
[68490.463042] usb 7-1: Sierra USB modem converter now attached to ttyUSB4
[68490.463051] sierra 7-1:1.5: Sierra USB modem converter detected
[68490.464311] usb 7-1: Sierra USB modem converter now attached to ttyUSB5
[68490.464321] sierra 7-1:1.6: Sierra USB modem converter detected
[68490.465050] usb 7-1: Sierra USB modem converter now attached to ttyUSB6
[68490.465063] usbcore: registered new interface driver sierra
[68490.465065] sierra: v.1.3.2:USB Driver for Sierra Wireless USB modems
[68495.274800] isa bounce pool size: 16 pages
[68495.276621] scsi 5:0:0:0: Direct-Access SWI SD Card 2.31 PQ: 0 ANSI: 2
[68495.282335] sd 5:0:0:0: [sdb] Attached SCSI removable disk
[68495.282550] sd 5:0:0:0: Attached scsi generic sg1 type 0
[68495.282998] usb-storage: device scan complete
[68504.418123] PPP generic driver version 2.4.2
[68504.666656] PPP BSD Compression module registered
[68504.801685] PPP Deflate Compression module registered
[68595.368293] device ppp0 entered promiscuous mode
[68604.327010] vendor=8086 device=2942
[68604.327022] iwlagn 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[68604.327210] iwlagn 0000:03:00.0: irq 314 for MSI/MSI-X
[68604.356406] Registered led device: iwl-phy1:radio
[68604.356456] Registered led device: iwl-phy1:assoc
[68604.356502] Registered led device: iwl-phy1:RX
[68604.356546] Registered led device: iwl-phy1:TX
[68604.370286] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[69134.199241] device ppp0 left promiscuous mode
[69186.618203] general protection fault: 0000 [#1] PREEMPT SMP
[69186.618216] last sysfs file: /sys/class/power_supply/BAT0/energy_full
[69186.618220] CPU 0
[69186.618224] Modules linked in: ppp_deflate zlib_deflate zlib_inflate bsd_comp ppp_async crc_ccitt ppp_generic slhc sierra usbserial usb_storage libusual nfs lockd nfs_acl sunrpc iwlagn tun sg usblp sr_mod cdrom vfat fat i915 drm rfcomm l2cap uinput autofs4 ipv6 cpufreq_powersave sha256_generic ansi_cprng krng chainiv rng aes_x86_64 aes_generic cbc dm_crypt dm_mod md_mod loop btusb bluetooth arc4 ecb cryptomgr aead crypto_blkcipher crypto_hash snd_hda_intel snd_pcm snd_page_alloc snd_hwdep snd_seq snd_timer snd_seq_device i2c_i801 rtc_cmos rtc_core snd rtc_lib iwlcore i2c_core pcspkr soundcore mac80211 cfg80211 ehci_hcd video output uhci_hcd wmi usbcore e1000e intel_agp thinkpad_acpi rfkill hwmon backlight led_class nvram [last unloaded: iwlagn]
[69186.618352] Pid: 2848, comm: kcryptd Not tainted 2.6.28-rc6-next-20081125-denkbrett #15
[69186.618357] RIP: 0010:[<ffffffff8031f246>] [<ffffffff8031f246>] crypto_xor+0x7/0x48
[69186.618372] RSP: 0018:ffff880079879cc8 EFLAGS: 00010212
[69186.618377] RAX: 00000000fffffff0 RBX: b6e3880000000010 RCX: 0000000000000000
[69186.618382] RDX: 0000000000000010 RSI: b6e3880000000000 RDI: ffff88007a3da4e0
[69186.618387] RBP: 0000000000000010 R08: 0000000000000010 R09: 0000000000000000
[69186.618392] R10: 0000000000000000 R11: ffff88007a3da4e0 R12: 0000000000000010
[69186.618397] R13: ffff88000c8c9000 R14: ffff88007a3da4e0 R15: 00000000000001f0
[69186.618403] FS: 0000000000000000(0000) GS:ffffffff805f51c0(0000) knlGS:0000000000000000
[69186.618408] CS: 0010 DS: 0018 ES: 0018 CR0: 000000008005003b
[69186.618413] CR2: 00007f56a00ef000 CR3: 0000000053dc9000 CR4: 00000000000006e0
[69186.618418] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[69186.618423] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
[69186.618429] Process kcryptd (pid: 2848, threadinfo ffff880079878000, task ffff88007c2f23a0)
[69186.618433] Stack:
[69186.618436] ffffffffa027226a ffffffff805e1e00 ffff880079879db0 ffff88007ad33800
[69186.618444] ffff88007b400360 ffffffffa0285705 fffffff000011212 0000000000000000
[69186.618453] b6e3880000000000 ffffe200002bebf8 ffff88000c8c9000 ffff88007a3da4a0
[69186.618462] Call Trace:
[69186.618468] [<ffffffffa027226a>] ? crypto_cbc_encrypt+0xfa/0x15a [cbc]
[69186.618481] [<ffffffffa0285705>] ? aes_encrypt+0x0/0x7 [aes_x86_64]
[69186.618494] [<ffffffffa020667d>] ? async_encrypt+0x35/0x3a [crypto_blkcipher]
[69186.618509] [<ffffffffa0269a6f>] ? crypt_convert+0x1d2/0x253 [dm_crypt]
[69186.618522] [<ffffffffa0269ed6>] ? kcryptd_crypt+0x3e6/0x407 [dm_crypt]
[69186.618533] [<ffffffffa0269af0>] ? kcryptd_crypt+0x0/0x407 [dm_crypt]
[69186.618543] [<ffffffff80241704>] ? run_workqueue+0x87/0x122
[69186.618552] [<ffffffff80241877>] ? worker_thread+0xd8/0xe7
[69186.618560] [<ffffffff80244e00>] ? autoremove_wake_function+0x0/0x2e
[69186.618569] [<ffffffff8024179f>] ? worker_thread+0x0/0xe7
[69186.618575] [<ffffffff8024179f>] ? worker_thread+0x0/0xe7
[69186.618582] [<ffffffff80244ae7>] ? kthread+0x47/0x73
[69186.618589] [<ffffffff8020c4e9>] ? child_rip+0xa/0x21
[69186.618597] [<ffffffff80244aa0>] ? kthread+0x0/0x73
[69186.618604] [<ffffffff8020c4df>] ? child_rip+0x0/0x21
[69186.618611] Code: 08 48 89 51 08 48 89 0a 48 b9 00 01 10 00 00 00 ad de 48 ba 00 02 20 00 00 00 ad de 48 89 08 48 89 50 08 c3 41 89 d0 31 c9 eb 0e <8b> 04 0e 41 83 e8 04 31 04 0f 48 83 c1 04 41 83 f8 03 77 ec 41
[69186.618678] RIP [<ffffffff8031f246>] crypto_xor+0x7/0x48
[69186.618686] RSP <ffff880079879cc8>
[69186.618723] ---[ end trace 728c95da3be59caf ]---
[69186.618730] note: kcryptd[2848] exited with preempt_count 2
Linux ikn 2.6.28-rc6-next-20081125-denkbrett #15 SMP PREEMPT Tue Nov 25 13:41:17 CET 2008 x86_64 GNU/Linux
07:12:23 up 1 day, 22:28, 1 user, load average: 2.21, 0.82, 0.58
USER PID %CPU %MEM VSZ RSS TTY STAT START TIME COMMAND
root 1 0.0 0.0 10312 616 ? Ss Nov26 0:00 init [2]
root 2 0.0 0.0 0 0 ? S< Nov26 0:00 [kthreadd]
root 3 0.0 0.0 0 0 ? S< Nov26 0:00 [migration/0]
root 4 0.0 0.0 0 0 ? S< Nov26 0:00 [ksoftirqd/0]
root 7 0.0 0.0 0 0 ? S< Nov26 0:01 [events/0]
root 9 0.0 0.0 0 0 ? S< Nov26 0:00 [khelper]
root 13 0.0 0.0 0 0 ? S< Nov26 0:00 [kstop/0]
root 109 0.0 0.0 0 0 ? S< Nov26 0:00 [kblockd/0]
root 111 0.0 0.0 0 0 ? S< Nov26 0:00 [kacpid]
root 112 0.0 0.0 0 0 ? S< Nov26 0:00 [kacpi_notify]
root 193 0.0 0.0 0 0 ? S< Nov26 0:00 [ata/0]
root 195 0.0 0.0 0 0 ? S< Nov26 0:00 [ata_aux]
root 197 0.0 0.0 0 0 ? S< Nov26 0:00 [kseriod]
root 226 0.0 0.0 0 0 ? S< Nov26 0:00 [kondemand/0]
root 261 0.0 0.0 0 0 ? S Nov26 0:00 [pdflush]
root 262 0.0 0.0 0 0 ? S Nov26 0:01 [pdflush]
root 263 0.0 0.0 0 0 ? S< Nov26 0:00 [kswapd0]
root 310 0.0 0.0 0 0 ? S< Nov26 0:00 [aio/0]
root 322 0.0 0.0 0 0 ? S< Nov26 0:00 [jfsIO]
root 323 0.0 0.0 0 0 ? S< Nov26 0:02 [jfsCommit]
root 324 0.0 0.0 0 0 ? S< Nov26 0:02 [jfsCommit]
root 325 0.0 0.0 0 0 ? S< Nov26 0:00 [jfsSync]
nico 392 0.0 0.0 12280 1536 ? S+ 07:00 0:00 /bin/sh /home/user/nico/bin/ressh.sh tee.schottelius.org
nico 393 0.0 0.1 46916 3008 ? S+ 07:00 0:00 ssh tee.schottelius.org
root 768 0.0 0.0 21448 1208 ? S 07:09 0:00 /usr/sbin/pppd 57600 modem crtscts defaultroute usehostname -detach user testprofil noipdefault call wvdial usepeerdns idle 0 logfd 8
postfix 834 0.0 0.1 38944 2252 ? S 07:09 0:00 qmgr -l -t fifo -u
postfix 835 0.0 0.1 38896 2212 ? S 07:09 0:00 pickup -l -t fifo -u -c
nico 948 0.0 0.0 19380 888 ? D+ 07:11 0:00 ls --color=auto
nico 963 0.2 0.1 32708 3392 ? S+ 07:12 0:00 vi /tmp/calltrace-2.6.28-next-1125
root 984 0.0 0.0 0 0 ? S< Nov26 0:00 [scsi_eh_0]
root 986 0.0 0.0 0 0 ? S< Nov26 0:00 [scsi_eh_1]
root 988 0.0 0.0 0 0 ? S< Nov26 0:00 [scsi_eh_2]
root 990 0.0 0.0 0 0 ? S< Nov26 0:00 [scsi_eh_3]
nico 993 0.0 0.0 17656 1100 ? R+ 07:12 0:00 ps auxwww
root 1003 0.0 0.0 0 0 ? S< Nov26 0:00 [khpsbpkt]
root 1025 0.0 0.0 0 0 ? S< Nov26 0:00 [kpsmoused]
root 1028 0.0 0.0 0 0 ? S< Nov26 0:00 [hid_compat]
root 1140 0.0 0.0 18280 588 ? S<s Nov26 0:00 udevd --daemon
root 1966 0.0 0.0 0 0 ? S< Nov26 0:00 [ktpacpid]
root 2013 0.0 0.0 0 0 ? S< Nov26 0:00 [ksuspend_usbd]
root 2022 0.0 0.0 0 0 ? S< Nov26 0:00 [khubd]
root 2423 0.0 0.0 0 0 ? S< Nov26 0:00 [btaddconn]
root 2425 0.0 0.0 0 0 ? S< Nov26 0:00 [btdelconn]
root 2591 0.0 0.0 0 0 ? S< Nov26 0:00 [kstriped]
root 2845 0.0 0.0 0 0 ? S< Nov26 0:00 [kdmflush]
root 2847 0.0 0.0 0 0 ? S< Nov26 0:00 [kcryptd_io]
root 2891 0.0 0.0 0 0 ? S< Nov26 0:00 [kdmflush]
root 2895 0.0 0.0 0 0 ? S< Nov26 0:00 [kcryptd_io]
root 2896 0.0 0.0 0 0 ? S< Nov26 0:05 [kcryptd]
daemon 3107 0.0 0.0 8020 472 ? Ss Nov26 0:00 /sbin/portmap
statd 3119 0.0 0.0 10136 708 ? Ss Nov26 0:00 /sbin/rpc.statd
root 3339 0.0 0.0 121972 1316 ? Sl Nov26 0:00 /usr/sbin/rsyslogd -c3
root 3350 0.0 0.1 6828 3520 ? Ss Nov26 0:00 /usr/sbin/acpid -c /etc/acpi/events
104 3360 0.0 0.0 21212 1016 ? Ss Nov26 0:00 /usr/bin/dbus-daemon --system
root 3487 0.0 0.0 16240 676 ? Ss Nov26 0:09 /usr/sbin/automount --pid-file=/var/run/autofs/_auto.pid --timeout=5 --ghost /auto file /etc/auto.kamera
root 3507 0.0 0.2 14856 4624 ? S<L Nov26 0:06 /usr/bin/atop -a -w /var/log/atop.log 600
root 3519 0.0 0.0 71580 1276 ? Ss Nov26 0:00 /usr/sbin/cupsd
root 3560 0.0 0.0 3644 124 ? S Nov26 0:00 /usr/sbin/thinkpad-keys --no-brightness
root 3569 0.0 0.0 61352 940 ? Ss Nov26 0:05 /usr/sbin/kerneloops
root 3592 0.0 0.0 10128 516 ? Ss Nov26 0:00 /usr/sbin/inetd
root 3663 0.0 0.1 36840 2036 ? Ss Nov26 0:00 /usr/lib/postfix/master
uml-net 3683 0.0 0.0 3792 440 ? S Nov26 0:00 /usr/bin/uml_switch -unix /var/run/uml-utilities/uml_switch.ctl
avahi 3697 0.0 0.0 28736 1408 ? Ss Nov26 0:01 avahi-daemon: running [ikn.local]
avahi 3699 0.0 0.0 28504 256 ? Ss Nov26 0:00 avahi-daemon: chroot helper
root 3707 0.0 0.0 6308 1044 ? Ss Nov26 0:03 /usr/sbin/dhcdbd --system
107 3718 0.0 0.1 29600 3728 ? Ss Nov26 0:05 /usr/sbin/hald
root 3719 0.0 0.0 17768 1108 ? S Nov26 0:00 hald-runner
root 3738 0.0 0.0 19880 1076 ? S Nov26 0:04 hald-addon-input: Listening on /dev/input/event0 /dev/input/event1 /dev/input/event2 /dev/input/event3 /dev/input/event5 /dev/input/event6 /dev/input/event8
root 3742 0.0 0.0 19892 924 ? S Nov26 0:00 /usr/lib/hal/hald-addon-cpufreq
107 3743 0.0 0.0 16604 912 ? S Nov26 0:00 hald-addon-acpi: listening on acpid socket /var/run/acpid.socket
root 3756 0.0 0.0 17696 1300 ? Ss Nov26 0:00 /usr/sbin/hcid -x -s
root 3765 0.0 0.0 0 0 ? S< Nov26 0:00 [krfcommd]
root 3776 0.0 0.0 12364 272 ? Ss Nov26 0:00 /sbin/mdadm --monitor --pid-file /var/run/mdadm/monitor.pid --daemonise --scan --syslog
root 3784 0.0 0.1 121316 2276 ? Ssl Nov26 0:02 /usr/sbin/NetworkManager --pid-file /var/run/NetworkManager/NetworkManager.pid
root 3794 0.0 0.0 24104 1304 ? Ss Nov26 0:00 /usr/sbin/NetworkManagerDispatcher --pid-file /var/run/NetworkManager/NetworkManagerDispatcher.pid
root 3804 0.0 0.0 26556 876 ? Ss Nov26 0:00 /usr/bin/system-tools-backends
daemon 3828 0.0 0.0 16356 308 ? Ss Nov26 0:00 /usr/sbin/atd
root 3848 0.0 0.0 21472 896 ? Ss Nov26 0:00 /usr/sbin/cron
root 3880 0.0 0.0 120200 964 ? Ss Nov26 0:02 /usr/sbin/apache2 -k start
www-data 3887 0.0 0.0 119932 500 ? S Nov26 0:00 /usr/sbin/apache2 -k start
www-data 3889 0.0 0.1 343940 2352 ? Sl Nov26 0:00 /usr/sbin/apache2 -k start
www-data 3890 0.0 0.1 343796 2144 ? Sl Nov26 0:00 /usr/sbin/apache2 -k start
root 4000 0.0 0.0 45632 864 tty1 Ss Nov26 0:00 /bin/login --
root 4003 0.0 0.0 3796 472 tty2 Ss+ Nov26 0:00 /sbin/getty 38400 tty2
root 4004 0.0 0.0 3796 472 tty3 Ss+ Nov26 0:00 /sbin/getty 38400 tty3
root 4006 0.0 0.0 3796 472 tty4 Ss+ Nov26 0:00 /sbin/getty 38400 tty4
root 4007 0.0 0.0 3796 472 tty5 Ss+ Nov26 0:00 /sbin/getty 38400 tty5
root 4009 0.0 0.0 3796 472 tty6 Ss+ Nov26 0:00 /sbin/getty 38400 tty6
root 4010 0.0 0.0 17276 1116 ? Ss Nov26 0:00 /bin/sh /usr/bin/svscanboot
root 4023 0.0 0.0 3824 400 ? S Nov26 0:00 svscan /etc/service
root 4024 0.0 0.0 3640 272 ? S Nov26 0:00 readproctitle service errors: ................................................................................................................................................................................................................................................................................................................................................................................................................
root 4025 0.0 0.0 3652 344 ? S Nov26 0:00 supervise dnscache
root 4026 0.0 0.0 3652 344 ? S Nov26 0:00 supervise log
djblog 4027 0.0 0.0 3796 420 ? S Nov26 0:00 multilog t ./main
nico 4046 0.0 0.0 38472 1564 tty1 S Nov26 0:00 -zsh
nico 4190 0.0 0.0 12308 1108 tty1 S+ Nov26 0:00 /bin/bash /usr/bin/startx
nico 4207 0.0 0.0 17308 728 tty1 S+ Nov26 0:00 xinit /home/user/nico/.xinitrc -- /etc/X11/xinit/xserverrc :0 -auth /tmp/serverauth.omPcJCstPE
root 4208 0.5 3.0 142252 60752 tty7 Ss+ Nov26 14:43 /usr/bin/X11/X -nolisten tcp
nico 4237 0.0 0.5 167508 11564 tty1 S Nov26 0:43 awesome
nico 4251 0.0 0.0 26204 788 ? S Nov26 0:04 xbindkeys
nico 4254 0.0 0.1 42900 3088 tty1 S Nov26 0:00 /usr/lib/libgconf2-4/gconfd-2 5
nico 4259 0.0 0.0 25732 468 tty1 S Nov26 0:00 dbus-launch --autolaunch acba744a0868205ffce3d55548e618c3 --binary-syntax --close-stderr
nico 4260 0.0 0.0 21084 848 ? Ss Nov26 0:00 /usr/bin/dbus-daemon --fork --print-pid 5 --print-address 7 --session
nico 4261 0.0 0.2 139212 5504 ? Ss Nov26 0:39 gnome-screensaver
nico 4267 0.0 1.6 195752 33116 tty1 S Nov26 0:28 urxvtd -q -f
nico 4281 0.0 0.1 41400 3192 ? Ss+ Nov26 0:00 zsh
root 4501 0.0 0.0 48864 548 ? Ss Nov26 0:00 /usr/sbin/sshd
nico 4973 0.0 0.0 11192 608 ? S Nov26 0:00 make
nico 4988 0.0 7.7 384676 155504 ? Sl Nov26 0:32 evince git.pdf
nico 5229 0.0 0.1 41052 3488 ? Ss Nov26 0:00 -zsh
nico 5231 0.0 0.1 41020 2852 ? Ss Nov26 0:00 -zsh
nico 7119 0.0 0.1 40748 3248 ? Ss+ Nov26 0:00 zsh
nico 7740 0.0 0.1 38456 2812 ? Ss Nov26 0:00 zsh
nico 8031 0.9 14.8 760572 298108 ? Dsl Nov26 26:03 /usr/lib/iceweasel/firefox-bin -a iceweasel
root 8674 0.0 0.0 0 0 ? S< Nov27 0:00 [rpciod/0]
root 8679 0.0 0.0 0 0 ? S< Nov27 0:00 [nfsiod]
nico 15742 0.0 0.1 38456 2704 ? Ss Nov27 0:00 zsh
nico 15920 0.0 0.8 72476 17156 ? D+ Nov27 0:03 mutt
nico 15946 0.0 0.1 38456 2812 ? Ss Nov27 0:00 zsh
compiler 22336 0.0 0.0 34088 1136 ? S Nov27 0:00 su - compiler
compiler 22339 0.0 0.1 40896 3240 ? S+ Nov27 0:00 -su
nico 23899 0.0 0.1 38456 2696 ? Ss Nov26 0:00 zsh
root 24040 0.0 0.1 37984 2484 ? S Nov26 0:02 -zsh
nico 24076 0.0 0.1 40868 3396 ? Ss+ Nov26 0:00 zsh
nico 24439 0.0 0.1 38456 2692 pts/13 Ss Nov26 0:00 zsh
root 24581 0.0 0.1 37984 2472 pts/13 S+ Nov26 0:00 -zsh
nico 24704 0.0 0.2 42248 4776 pts/18 Ss+ Nov27 0:02 zsh
nico 24810 0.0 0.1 38456 2692 ? Ss Nov26 0:00 zsh
root 25008 0.0 0.1 37984 2336 ? S Nov26 0:00 -zsh
dnscache 25687 0.0 0.1 5416 2004 ? S Nov26 0:00 /usr/bin/dnscache
root 28464 0.0 0.0 0 0 ? S< Nov26 0:03 [iwlagn/0]
root 28467 0.0 0.0 0 0 ? S< Nov26 0:00 [iwlagn]
nico 30292 0.0 0.1 32840 3688 ? S+ Nov27 0:23 vi erste-schritte.tex
nico 30396 0.0 0.0 42788 1416 ? Ss Nov27 0:00 ssh -T -f -C -N -L4242:imaps.schottelius.org:993 nico@77.109.138.222
nico 30398 0.0 0.1 43380 2056 ? Ss Nov27 0:00 ssh -T -f -C -N -L2323:mx3.schottelius.org:993 nico@77.109.138.222
nico 30400 0.0 0.0 42788 1056 ? Ss Nov27 0:00 ssh -T -f -C -N -R4242:localhost:22 nico@77.109.138.222
nico 30405 0.0 0.0 0 0 tty1 Z Nov27 0:00 [awesome] <defunct>
nico 30408 0.0 0.2 41360 4056 pts/3 Ss+ Nov27 0:00 zsh
root 32431 0.0 0.0 0 0 ? S< 06:56 0:00 [migration/1]
root 32432 0.0 0.0 0 0 ? S< 06:56 0:00 [ksoftirqd/1]
root 32433 0.0 0.0 0 0 ? S< 06:56 0:00 [rpciod/1]
root 32434 0.0 0.0 0 0 ? S< 06:56 0:00 [iwlagn/1]
root 32435 0.0 0.0 0 0 ? S< 06:56 0:00 [aio/1]
root 32436 0.0 0.0 0 0 ? S< 06:56 0:00 [kondemand/1]
root 32437 0.0 0.0 0 0 ? S< 06:56 0:00 [ata/1]
root 32438 0.0 0.0 0 0 ? S< 06:56 0:00 [kblockd/1]
root 32439 0.0 0.0 0 0 ? S< 06:56 0:00 [kstop/1]
root 32440 0.0 0.0 0 0 ? S< 06:56 0:00 [events/1]
root 32619 0.0 0.0 0 0 ? S< 06:58 0:00 [scsi_eh_5]
root 32620 0.0 0.0 0 0 ? S< 06:58 0:00 [usb-storage]
root 32702 0.0 0.0 19880 1148 ? S 06:58 0:00 hald-addon-storage: polling /dev/sdb (every 2 sec)
root 32713 0.0 0.1 39944 3520 ? S+ 06:58 0:00 wvdial -C /home/user/nico/privat/computer/net/umts/wvdial-swisscom-corporate.conf
[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 197 bytes --]
^ permalink raw reply
* linux-next: manual merge of the firmware tree
From: Stephen Rothwell @ 2008-11-28 5:03 UTC (permalink / raw)
To: David Woodhouse; +Cc: linux-next, Divy Le Ray, David S. Miller, Jaswinder Singh
Hi David,
Today's linux-next merge of the firmware tree got conflicts in
firmware/Makefile and firmware/WHENCE between commit
ad58633c8381e88b54055771877726d3d5d24734 ("cxgb3: integrate FW and
protocol engines in the kernel") from the net tree and various commits
from the firmware tree.
Just overlapping additions. I fixed it up (see below) and can carry the
fix.
Is it time that some of these went to their respective maintainers?
--
Cheers,
Stephen Rothwell sfr@canb.auug.org.au
http://www.canb.auug.org.au/~sfr/
diff --cc firmware/Makefile
index 4993a4b,ac55853..0000000
--- a/firmware/Makefile
+++ b/firmware/Makefile
@@@ -24,10 -33,15 +33,18 @@@ fw-shipped-$(CONFIG_ATARI_DSP56K) += ds
fw-shipped-$(CONFIG_ATM_AMBASSADOR) += atmsar11.fw
fw-shipped-$(CONFIG_CASSINI) += sun/cassini.bin
fw-shipped-$(CONFIG_COMPUTONE) += intelliport2.bin
+fw-shipped-$(CONFIG_CHELSIO_T3) += cxgb3/t3b_psram-1.1.0.bin \
+ cxgb3/t3c_psram-1.1.0.bin \
+ cxgb3/t3fw-7.0.0.bin
+ fw-shipped-$(CONFIG_DVB_AV7110) += av7110/bootcode.bin
fw-shipped-$(CONFIG_DVB_TTUSB_BUDGET) += ttusb-budget/dspbootcode.bin
+ fw-shipped-$(CONFIG_E100) += e100/d101m_ucode.bin e100/d101s_ucode.bin \
+ e100/d102e_ucode.bin
+ fw-shipped-$(CONFIG_SCSI_ADVANSYS) += advansys/mcode.bin advansys/38C1600.bin \
+ advansys/3550.bin advansys/38C0800.bin
+ fw-shipped-$(CONFIG_SCSI_QLOGIC_1280) += qlogic/1040.bin qlogic/1280.bin \
+ qlogic/12160.bin
+ fw-shipped-$(CONFIG_SCSI_QLOGICPTI) += qlogic/isp1000.bin
fw-shipped-$(CONFIG_SMCTR) += tr_smctr.bin
fw-shipped-$(CONFIG_SND_KORG1212) += korg/k1212.dsp
fw-shipped-$(CONFIG_SND_MAESTRO3) += ess/maestro3_assp_kernel.fw \
diff --cc firmware/WHENCE
index 8f06639,cfab534..0000000
--- a/firmware/WHENCE
+++ b/firmware/WHENCE
@@@ -350,13 -350,123 +350,133 @@@ Found in hex form in kernel source
--------------------------------------------------------------------------
+Driver: cxgb3 - Chelsio Terminator 3 1G/10G Ethernet adapter
+
+File: cxgb3/t3b_psram-1.1.0.bin.ihex
+File: cxgb3/t3c_psram-1.1.0.bin.ihex
+file: cxgb3/t3fw-7.0.0.bin.ihex
+
+License: GPLv2 or OpenIB.org BSD license, no source visible
+
+--------------------------------------------------------------------------
+
+ Driver: e100 -- Intel PRO/100 Ethernet NIC
+
+ File: e100/d101m_ucode.bin
+ File: e100/d101s_ucode.bin
+ File: e100/d102e_ucode.bin
+
+ Licence: Unknown
+
+ Found in hex form in kernel source.
+
+ --------------------------------------------------------------------------
+
+ Driver: acenic -- Alteon AceNIC Gigabit Ethernet card
+
+ File: acenic/tg1.bin
+ File: acenic/tg2.bin
+
+ Licence: Unknown
+
+ Found in hex form in kernel source, but source allegedly available at
+ http://alteon.shareable.org/
+
+ --------------------------------------------------------------------------
+
+ Driver: tigon3 -- Broadcom Tigon3 based gigabit Ethernet cards
+
+ File: tigon/tg3.bin
+ File: tigon/tg3_tso.bin
+ File: tigon/tg3_tso5.bin
+
+ Licence:
+ * Firmware is:
+ * Derived from proprietary unpublished source code,
+ * Copyright (C) 2000-2003 Broadcom Corporation.
+ *
+ * Permission is hereby granted for the distribution of this firmware
+ * data in hexadecimal or equivalent format, provided this copyright
+ * notice is accompanying it.
+
+ Found in hex form in kernel source.
+
+ --------------------------------------------------------------------------
+
+ Driver: DVB AV7110 -- AV7110 cards
+
+ File: av7110/bootcode.bin
+
+ Licence: GPLv2 or later
+
+ ARM assembly source code available at http://www.linuxtv.org/downloads/firmware/Boot.S
+
+ --------------------------------------------------------------------------
+
+ Driver: SCSI_QLOGIC_1280 - Qlogic QLA 1240/1x80/1x160 SCSI support
+
+ File: qlogic/1040.bin
+ File: qlogic/1280.bin
+ File: qlogic/12160.bin
+
+ Licence: Allegedly GPLv2+, but no source visible. Marked:
+
+ QLOGIC LINUX SOFTWARE
+ QLogic ISP1280/ device driver for Linux 2.2.x and 2.4.x
+ Copyright (C) 2001 Qlogic Corporation (www.qlogic.com)
+
+ --------------------------------------------------------------------------
+
+ Driver: SCSI_ADVANSYS - AdvanSys SCSI
+
+ File: advansys/mcode.bin
+ File: advansys/3550.bin
+ File: advansys/38C0800.bin
+ File: advansys/38C1600.bin
+
+ Licence: Allegedly GPLv2+, but no source visible.
+
+ Found in hex form in kernel source.
+
+ --------------------------------------------------------------------------
+
+ Driver: SCSI_QLOGICPTI - PTI Qlogic, ISP Driver
+
+ File: qlogic/isp1000.bin
+
+ Licence: Unknown
+
+ Found in hex form in kernel source.
+
+ --------------------------------------------------------------------------
+
+ Driver: ADAPTEC_STARFIRE - Adaptec Starfire/DuraLAN support
+
+ File: adaptec/starfire_rx.bin
+ File: adaptec/starfire_tx.bin
+
+ Licence: Allegedly GPLv2, but no source visible.
+
+ Found in hex form in kernel source, with the following notice:
+
+ BECAUSE THE PROGRAM IS LICENSED FREE OF CHARGE IT IS LICENSED "AS IS" AND
+ THERE IS NO WARRANTY FOR THE PROGRAM, INCLUDING BUT NOT LIMITED TO THE
+ IMPLIED WARRANTIES OF MERCHANTIBILITY OR FITNESS FOR A PARTICULAR PURPOSE
+ (TO THE EXTENT PERMITTED BY APPLICABLE LAW). USE OF THE PROGRAM IS AT YOUR
+ OWN RISK. IN NO EVENT WILL ADAPTEC OR ITS LICENSORS BE LIABLE TO YOU FOR
+ DAMAGES, INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES
+ ARISING OUT OF THE USE OR INABILITY TO USE THE PROGRAM.
+
+ --------------------------------------------------------------------------
+
+ Driver: wavefront - ISA WaveFront sound card
+
+ File: yamaha/yss225_registers.bin
+
+ Licence: Allegedly GPLv2+, but no source visible.
+
+ Found in hex form in kernel source, with the following comment:
+ Copyright (c) 1998-2002 by Paul Davis <pbd@op.net>
+
+
+ --------------------------------------------------------------------------
^ permalink raw reply
* linux-next: net tree build failure
From: Stephen Rothwell @ 2008-11-28 3:46 UTC (permalink / raw)
To: David Miller; +Cc: linux-next, Harvey Harrison, Steven Whitehouse
[-- Attachment #1: Type: text/plain, Size: 776 bytes --]
Hi Dave,
Today's linux-next build (x86_64 allmodconfig) failed like this:
In file included from /net/decnet/netfilter/dn_rtmsg.c:26:
include/net/dn.h:7:26: error: asm/unalignedh: No such file or directory
In file included from net/decnet/netfilter/dn_rtmsg.c:26:
include/net/dn.h: In function 'dn_eth2dn':
include/net/dn.h:176: error: implicit declaration of function 'get_unaligned'
Caused by commit c4106aa88a440430d387e022f2ad6dc1e0d52e98 ("decnet:
remove private wrappers of endian helpers"). I can only assume that the
sparc64 allmodconfig doesn't include decnet ...
I will fix this one for you ... condsider it a late birthday present. :-)
--
Cheers,
Stephen Rothwell sfr@canb.auug.org.au
http://www.canb.auug.org.au/~sfr/
[-- Attachment #2: Type: application/pgp-signature, Size: 197 bytes --]
^ permalink raw reply
* Re: [PATCH -next] sctp: fix missing label when PROC_FS=n
From: David Miller @ 2008-11-27 23:31 UTC (permalink / raw)
To: randy.dunlap; +Cc: linux-next, netdev
In-Reply-To: <20081127121824.5b3515c9.randy.dunlap@oracle.com>
From: Randy Dunlap <randy.dunlap@oracle.com>
Date: Thu, 27 Nov 2008 12:18:24 -0800
> From: Randy Dunlap <randy.dunlap@oracle.com>
>
> Fix missing label when CONFIG_PROC_FS=n:
>
> net/sctp/protocol.c: In function 'sctp_proc_init':
> net/sctp/protocol.c:106: error: label 'out_nomem' used but not defined
> make[3]: *** [net/sctp/protocol.o] Error 1
>
> Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Applied, thanks a lot Randy.
^ permalink raw reply
* Re: linux-next: branch name change for HID tree
From: Stephen Rothwell @ 2008-11-27 23:06 UTC (permalink / raw)
To: Jiri Kosina; +Cc: linux-next
In-Reply-To: <alpine.LNX.1.10.0811271151080.19853@jikos.suse.cz>
[-- Attachment #1: Type: text/plain, Size: 508 bytes --]
Hi Jiri,
On Thu, 27 Nov 2008 11:52:53 +0100 (CET) Jiri Kosina <jkosina@suse.cz> wrote:
>
> could you please change the branch name you are pulling from HID git tree
> into linux-next?
> The current branch name 'mm' is a historic artifact from times akpm has
> been pullin this directly into -mm. I have introduced 'for-next' branch,
> which I'd like to ask you to pull instead.
Done.
--
Cheers,
Stephen Rothwell sfr@canb.auug.org.au
http://www.canb.auug.org.au/~sfr/
[-- Attachment #2: Type: application/pgp-signature, Size: 197 bytes --]
^ permalink raw reply
* Re: linux-next: trivial tree
From: Stephen Rothwell @ 2008-11-27 22:58 UTC (permalink / raw)
To: Jiri Kosina; +Cc: linux-kernel, linux-next, Jesper Juhl
In-Reply-To: <alpine.LNX.1.10.0811271145180.19853@jikos.suse.cz>
[-- Attachment #1: Type: text/plain, Size: 772 bytes --]
Hi Jiri,
On Thu, 27 Nov 2008 11:49:59 +0100 (CET) Jiri Kosina <jkosina@suse.cz> wrote:
>
> I have taken over trivial patches maintainership from Jesper. I will
> process all the patches in Jesper's queue when he sends them over to me.
> Could you please re-introduce trivial tree into linux-next lineup? It is
> 'for-next' branch of
>
> git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial.git for-next
Added from today.
What I tell everyone: all patches in that branch must have been
posted to a relevant mailing list
reviewed
unit tested
destined for the next merge window (or the current release)
*before* they are included.
--
Cheers,
Stephen Rothwell sfr@canb.auug.org.au
http://www.canb.auug.org.au/~sfr/
[-- Attachment #2: Type: application/pgp-signature, Size: 197 bytes --]
^ permalink raw reply
* [PATCH -next] sctp: fix missing label when PROC_FS=n
From: Randy Dunlap @ 2008-11-27 20:18 UTC (permalink / raw)
To: linux-next; +Cc: netdev, davem
From: Randy Dunlap <randy.dunlap@oracle.com>
Fix missing label when CONFIG_PROC_FS=n:
net/sctp/protocol.c: In function 'sctp_proc_init':
net/sctp/protocol.c:106: error: label 'out_nomem' used but not defined
make[3]: *** [net/sctp/protocol.o] Error 1
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
---
net/sctp/protocol.c | 5 +++--
1 file changed, 3 insertions(+), 2 deletions(-)
--- linux-next-20081127.orig/net/sctp/protocol.c
+++ linux-next-20081127/net/sctp/protocol.c
@@ -139,11 +139,12 @@ out_snmp_proc_init:
}
out_free_percpu:
percpu_counter_destroy(&sctp_sockets_allocated);
-out_nomem:
- return -ENOMEM;
#else
return 0;
#endif /* CONFIG_PROC_FS */
+
+out_nomem:
+ return -ENOMEM;
}
/* Clean up the proc fs entry for the SCTP protocol.
^ permalink raw reply
* Re: fuse tree
From: Miklos Szeredi @ 2008-11-27 16:31 UTC (permalink / raw)
To: sfr; +Cc: miklos, linux-next, linux-kernel, akpm, tj
In-Reply-To: <20081127022036.1dd0e2e6.sfr@canb.auug.org.au>
On Thu, 27 Nov 2008, Stephen Rothwell wrote:
> On Wed, 26 Nov 2008 12:29:19 +0100 Miklos Szeredi <miklos@szeredi.hu> wrote:
> >
> > Could you please add the following git tree, containing fuse patches
> > to be included in 2.6.29, to the linux-next lineup?
> >
> > git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse.git for-next
>
> I have added it for tomorrow's tree.
Thanks Stephen.
>
> What I tell everyone: all patches in that branch must have been
> posted to a relevant mailing list
> reviewed
> unit tested
> destined for the next merge window (or the current release)
> *before* they are included.
Ack.
Thanks,
Miklos
^ permalink raw reply
page: next (older) | prev (newer) | latest
- recent:[subjects (threaded)|topics (new)|topics (active)]
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox