[linux-nfc] Re: [PATCH v2 net-next 2/2] nfc: s3fwrn5: Remove hard coded interrupt trigger type from the i2c module

[linux-nfc] Re: [PATCH v2 net-next 2/2] nfc: s3fwrn5: Remove hard coded interrupt trigger type from the i2c module

[Krzysztof Kozlowski]

[-- Attachment #1: Type: text/plain, Size: 1691 bytes --]

On Tue, Dec 08, 2020@11:10:12PM +0900, Bongsu Jeon wrote:
> From: Bongsu Jeon <bongsu.jeon@samsung.com>
> 
> For the flexible control of interrupt trigger type, remove the hard coded
> interrupt trigger type in the i2c module. The trigger type will be loaded
>  from a dts.
> 
> Signed-off-by: Bongsu Jeon <bongsu.jeon@samsung.com>
> ---
>  drivers/nfc/s3fwrn5/i2c.c | 7 ++++++-
>  1 file changed, 6 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/nfc/s3fwrn5/i2c.c b/drivers/nfc/s3fwrn5/i2c.c
> index e1bdde105f24..42f1f610ac2c 100644
> --- a/drivers/nfc/s3fwrn5/i2c.c
> +++ b/drivers/nfc/s3fwrn5/i2c.c
> @@ -179,6 +179,8 @@ static int s3fwrn5_i2c_probe(struct i2c_client *client,
>  				  const struct i2c_device_id *id)
>  {
>  	struct s3fwrn5_i2c_phy *phy;
> +	struct irq_data *irq_data;
> +	unsigned long irqflags;
>  	int ret;
>  
>  	phy = devm_kzalloc(&client->dev, sizeof(*phy), GFP_KERNEL);
> @@ -212,8 +214,11 @@ static int s3fwrn5_i2c_probe(struct i2c_client *client,
>  	if (ret < 0)
>  		return ret;
>  
> +	irq_data = irq_get_irq_data(client->irq);
> +	irqflags = irqd_get_trigger_type(irq_data) | IRQF_ONESHOT;

This patch is wrong and should not be applied. David, please give few
days to review the patches. :)

The irqd_get_trigger_type is not necessary.

I'll send follow ups to correct this.

Best regards,
Krzysztof


> +
>  	ret = devm_request_threaded_irq(&client->dev, phy->i2c_dev->irq, NULL,
> -		s3fwrn5_i2c_irq_thread_fn, IRQF_TRIGGER_HIGH | IRQF_ONESHOT,
> +		s3fwrn5_i2c_irq_thread_fn, irqflags,
>  		S3FWRN5_I2C_DRIVER_NAME, phy);
>  	if (ret)
>  		s3fwrn5_remove(phy->common.ndev);
> -- 
> 2.17.1
>