From: andros@netapp.com
To: trond.myklebust@netapp.com
Cc: linux-nfs@vger.kernel.org, Andy Adamson <andros@netapp.com>
Subject: [PATCH 03/16] NFS move nfs_client initialization into nfs_get_client
Date: Mon, 14 Feb 2011 14:18:23 -0500 [thread overview]
Message-ID: <1297711116-3139-4-git-send-email-andros@netapp.com> (raw)
In-Reply-To: <1297711116-3139-1-git-send-email-andros@netapp.com>
From: Andy Adamson <andros@netapp.com>
Now nfs_get_client returns an nfs_client ready to be used no matter if it was
found or created.
Signed-off-by: Andy Adamson <andros@netapp.com>
---
fs/nfs/client.c | 67 ++++++++++++++++++++++++++++++++++++++----------------
1 files changed, 47 insertions(+), 20 deletions(-)
diff --git a/fs/nfs/client.c b/fs/nfs/client.c
index bd3ca32..75b236f 100644
--- a/fs/nfs/client.c
+++ b/fs/nfs/client.c
@@ -81,6 +81,15 @@ retry:
}
#endif /* CONFIG_NFS_V4 */
+static int nfs4_init_client(struct nfs_client *clp,
+ const struct rpc_timeout *timeparms,
+ const char *ip_addr,
+ rpc_authflavor_t authflavour,
+ int noresvport);
+static int nfs_init_client(struct nfs_client *clp,
+ const struct rpc_timeout *timeparms,
+ int noresvport);
+
/*
* RPC cruft for NFS
*/
@@ -481,7 +490,12 @@ static struct nfs_client *nfs_match_client(const struct nfs_client_initdata *dat
* Look up a client by IP address and protocol version
* - creates a new record if one doesn't yet exist
*/
-static struct nfs_client *nfs_get_client(const struct nfs_client_initdata *cl_init)
+static struct nfs_client *
+nfs_get_client(const struct nfs_client_initdata *cl_init,
+ const struct rpc_timeout *timeparms,
+ const char *ip_addr,
+ rpc_authflavor_t authflavour,
+ int noresvport)
{
struct nfs_client *clp, *new = NULL;
int error;
@@ -512,6 +526,17 @@ install_client:
clp = new;
list_add(&clp->cl_share_link, &nfs_client_list);
spin_unlock(&nfs_client_lock);
+
+ if (cl_init->rpc_ops->version == 4)
+ error = nfs4_init_client(clp, timeparms, ip_addr, authflavour,
+ noresvport);
+ else
+ error = nfs_init_client(clp, timeparms, noresvport);
+
+ if (error < 0) {
+ nfs_put_client(clp);
+ return ERR_PTR(error);
+ }
dprintk("--> nfs_get_client() = %p [new]\n", clp);
return clp;
@@ -769,7 +794,7 @@ static int nfs_init_server_rpcclient(struct nfs_server *server,
*/
static int nfs_init_client(struct nfs_client *clp,
const struct rpc_timeout *timeparms,
- const struct nfs_parsed_mount_data *data)
+ int noresvport)
{
int error;
@@ -784,7 +809,7 @@ static int nfs_init_client(struct nfs_client *clp,
* - RFC 2623, sec 2.3.2
*/
error = nfs_create_rpc_client(clp, timeparms, RPC_AUTH_UNIX,
- 0, data->flags & NFS_MOUNT_NORESVPORT);
+ 0, noresvport);
if (error < 0)
goto error;
nfs_mark_client_ready(clp, NFS_CS_READY);
@@ -820,19 +845,17 @@ static int nfs_init_server(struct nfs_server *server,
cl_init.rpc_ops = &nfs_v3_clientops;
#endif
+ nfs_init_timeout_values(&timeparms, data->nfs_server.protocol,
+ data->timeo, data->retrans);
+
/* Allocate or find a client reference we can use */
- clp = nfs_get_client(&cl_init);
+ clp = nfs_get_client(&cl_init, &timeparms, NULL, RPC_AUTH_UNIX,
+ data->flags & NFS_MOUNT_NORESVPORT);
if (IS_ERR(clp)) {
dprintk("<-- nfs_init_server() = error %ld\n", PTR_ERR(clp));
return PTR_ERR(clp);
}
- nfs_init_timeout_values(&timeparms, data->nfs_server.protocol,
- data->timeo, data->retrans);
- error = nfs_init_client(clp, &timeparms, data);
- if (error < 0)
- goto error;
-
server->nfs_client = clp;
/* Initialise the client representation from the mount data */
@@ -1311,7 +1334,7 @@ static int nfs4_init_client(struct nfs_client *clp,
const struct rpc_timeout *timeparms,
const char *ip_addr,
rpc_authflavor_t authflavour,
- int flags)
+ int noresvport)
{
int error;
@@ -1325,7 +1348,7 @@ static int nfs4_init_client(struct nfs_client *clp,
clp->rpc_ops = &nfs_v4_clientops;
error = nfs_create_rpc_client(clp, timeparms, authflavour,
- 1, flags & NFS_MOUNT_NORESVPORT);
+ 1, noresvport);
if (error < 0)
goto error;
strlcpy(clp->cl_ipaddr, ip_addr, sizeof(clp->cl_ipaddr));
@@ -1378,22 +1401,16 @@ static int nfs4_set_client(struct nfs_server *server,
dprintk("--> nfs4_set_client()\n");
/* Allocate or find a client reference we can use */
- clp = nfs_get_client(&cl_init);
+ clp = nfs_get_client(&cl_init, timeparms, ip_addr, authflavour,
+ server->flags & NFS_MOUNT_NORESVPORT);
if (IS_ERR(clp)) {
error = PTR_ERR(clp);
goto error;
}
- error = nfs4_init_client(clp, timeparms, ip_addr, authflavour,
- server->flags);
- if (error < 0)
- goto error_put;
server->nfs_client = clp;
dprintk("<-- nfs4_set_client() = 0 [new %p]\n", clp);
return 0;
-
-error_put:
- nfs_put_client(clp);
error:
dprintk("<-- nfs4_set_client() = xerror %d\n", error);
return error;
@@ -1611,6 +1628,16 @@ error:
return ERR_PTR(error);
}
+#else /* CONFIG_NFS_V4 */
+static int nfs4_init_client(struct nfs_client *clp,
+ const struct rpc_timeout *timeparms,
+ const char *ip_addr,
+ rpc_authflavor_t authflavour,
+ int noresvport)
+{
+ return -EPROTONOSUPPORT;
+}
+
#endif /* CONFIG_NFS_V4 */
/*
--
1.7.2.3
next prev parent reply other threads:[~2011-02-14 19:18 UTC|newest]
Thread overview: 54+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-02-14 19:18 [PATCH 0/16] pnfs wave 3 submission andros
2011-02-14 19:18 ` [PATCH 01/16] NFS remove unnecessary CONFIG_NFS_V4 from nfs_read_data andros
2011-02-15 9:16 ` Christoph Hellwig
2011-02-15 9:24 ` Taousif_Ansari-G5Y5guI6XLZWk0Htik3J/w
2011-02-15 14:51 ` Andy Adamson
2011-02-14 19:18 ` [PATCH 02/16] NFS put_layout_hdr can remove nfsi->layout andros
2011-02-14 19:18 ` andros [this message]
2011-02-16 2:58 ` [PATCH 03/16] NFS move nfs_client initialization into nfs_get_client Benny Halevy
2011-02-16 16:00 ` Andy Adamson
2011-02-14 19:18 ` [PATCH 04/16] pnfs: wave 3: send zero stateid seqid on v4.1 i/o andros
2011-02-14 19:18 ` [PATCH 05/16] pnfs: wave 3: new flag for state renewal check andros
2011-02-14 19:18 ` [PATCH 06/16] pnfs: wave 3: new flag for lease time check andros
2011-02-14 19:18 ` [PATCH 07/16] pnfs: wave 3: add MDS mount DS only check andros
2011-02-14 19:18 ` [PATCH 08/16] pnfs: wave 3: lseg refcounting andros
2011-02-15 9:25 ` Christoph Hellwig
2011-02-15 14:48 ` Fred Isaman
2011-02-15 14:58 ` Christoph Hellwig
2011-02-15 14:59 ` Benny Halevy
2011-02-15 15:06 ` Christoph Hellwig
2011-02-15 15:11 ` Fred Isaman
2011-02-15 16:02 ` Christoph Hellwig
2011-02-15 16:37 ` William A. (Andy) Adamson
2011-02-15 19:17 ` Andy Adamson
2011-02-15 19:29 ` Benny Halevy
2011-02-15 19:30 ` Andy Adamson
2011-02-15 15:07 ` Fred Isaman
2011-02-14 19:18 ` [PATCH 09/16] pnfs: wave 3: shift pnfs_update_layout locations andros
2011-02-14 23:14 ` Trond Myklebust
2011-02-15 14:41 ` Fred Isaman
2011-02-15 15:00 ` Trond Myklebust
2011-02-16 3:11 ` Benny Halevy
2011-02-14 19:18 ` [PATCH 10/16] pnfs: wave 3: coelesce across layout stripes andros
2011-02-14 23:42 ` Trond Myklebust
2011-02-15 14:43 ` William A. (Andy) Adamson
2011-02-15 15:03 ` Trond Myklebust
[not found] ` <1297782220.10103.13.camel-rJ7iovZKK19ZJLDQqaL3InhyD016LWXt@public.gmane.org>
2011-02-15 15:10 ` Andy Adamson
2011-02-14 19:18 ` [PATCH 11/16] pnfs: wave 3: generic read andros
2011-02-14 23:36 ` Trond Myklebust
2011-02-15 14:47 ` Andy Adamson
2011-02-16 3:16 ` Benny Halevy
2011-02-16 14:53 ` Andy Adamson
2011-02-16 15:09 ` Trond Myklebust
2011-02-16 15:52 ` Benny Halevy
2011-02-16 15:56 ` Andy Adamson
2011-02-16 15:57 ` Sager, Mike
2011-02-14 19:18 ` [PATCH 12/16] pnfs: wave 3: data server connection andros
2011-02-14 19:18 ` [PATCH 13/16] pnfs: wave 3: filelayout i/o helpers andros
2011-02-15 9:31 ` Christoph Hellwig
2011-02-15 15:12 ` Andy Adamson
2011-02-14 19:18 ` [PATCH 14/16] pnfs: wave 3: filelayout read andros
2011-02-14 19:18 ` [PATCH 15/16] pnfs: wave 3: filelayout async error handler andros
2011-02-14 19:18 ` [PATCH 16/16] pnfs: wave 3: turn off pNFS on ds connection failure andros
2011-02-14 22:39 ` [PATCH 0/16] pnfs wave 3 submission Trond Myklebust
2011-02-15 14:44 ` William A. (Andy) Adamson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1297711116-3139-4-git-send-email-andros@netapp.com \
--to=andros@netapp.com \
--cc=linux-nfs@vger.kernel.org \
--cc=trond.myklebust@netapp.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).