From: Fred Isaman <iisaman@netapp.com>
To: linux-nfs@vger.kernel.org
Cc: Trond Myklebust <Trond.Myklebust@netapp.com>
Subject: [PATCH 1/7] NFSv4.1: rearrange nfs_write_rpcsetup
Date: Mon, 21 Feb 2011 12:49:30 -0500 [thread overview]
Message-ID: <1298310576-13523-2-git-send-email-iisaman@netapp.com> (raw)
In-Reply-To: <1298310576-13523-1-git-send-email-iisaman@netapp.com>
From: Andy Adamson <andros@netapp.com>
Reorder nfs_write_rpcsetup, preparing for a pnfs entry point.
Signed-off-by: Andy Adamson <andros@netapp.com>
Signed-off-by: Fred Isaman <iisaman@netapp.com>
---
fs/nfs/write.c | 82 +++++++++++++++++++++++++++++++------------------------
1 files changed, 46 insertions(+), 36 deletions(-)
diff --git a/fs/nfs/write.c b/fs/nfs/write.c
index aca0268..5604854 100644
--- a/fs/nfs/write.c
+++ b/fs/nfs/write.c
@@ -782,25 +782,21 @@ static int flush_task_priority(int how)
return RPC_PRIORITY_NORMAL;
}
-/*
- * Set up the argument/result storage required for the RPC call.
- */
-static int nfs_write_rpcsetup(struct nfs_page *req,
- struct nfs_write_data *data,
- const struct rpc_call_ops *call_ops,
- unsigned int count, unsigned int offset,
- int how)
+static int nfs_initiate_write(struct nfs_write_data *data,
+ struct rpc_clnt *clnt,
+ const struct rpc_call_ops *call_ops,
+ int how)
{
- struct inode *inode = req->wb_context->path.dentry->d_inode;
+ struct inode *inode = data->inode;
int priority = flush_task_priority(how);
struct rpc_task *task;
struct rpc_message msg = {
.rpc_argp = &data->args,
.rpc_resp = &data->res,
- .rpc_cred = req->wb_context->cred,
+ .rpc_cred = data->cred,
};
struct rpc_task_setup task_setup_data = {
- .rpc_client = NFS_CLIENT(inode),
+ .rpc_client = clnt,
.task = &data->task,
.rpc_message = &msg,
.callback_ops = call_ops,
@@ -811,12 +807,49 @@ static int nfs_write_rpcsetup(struct nfs_page *req,
};
int ret = 0;
+ /* Set up the initial task struct. */
+ NFS_PROTO(inode)->write_setup(data, &msg);
+
+ dprintk("NFS: %5u initiated write call "
+ "(req %s/%lld, %u bytes @ offset %llu)\n",
+ data->task.tk_pid,
+ inode->i_sb->s_id,
+ (long long)NFS_FILEID(inode),
+ data->args.count,
+ (unsigned long long)data->args.offset);
+
+ task = rpc_run_task(&task_setup_data);
+ if (IS_ERR(task)) {
+ ret = PTR_ERR(task);
+ goto out;
+ }
+ if (how & FLUSH_SYNC) {
+ ret = rpc_wait_for_completion_task(task);
+ if (ret == 0)
+ ret = task->tk_status;
+ }
+ rpc_put_task(task);
+out:
+ return ret;
+}
+
+/*
+ * Set up the argument/result storage required for the RPC call.
+ */
+static int nfs_write_rpcsetup(struct nfs_page *req,
+ struct nfs_write_data *data,
+ const struct rpc_call_ops *call_ops,
+ unsigned int count, unsigned int offset,
+ int how)
+{
+ struct inode *inode = req->wb_context->path.dentry->d_inode;
+
/* Set up the RPC argument and reply structs
* NB: take care not to mess about with data->commit et al. */
data->req = req;
data->inode = inode = req->wb_context->path.dentry->d_inode;
- data->cred = msg.rpc_cred;
+ data->cred = req->wb_context->cred;
data->args.fh = NFS_FH(inode);
data->args.offset = req_offset(req) + offset;
@@ -837,30 +870,7 @@ static int nfs_write_rpcsetup(struct nfs_page *req,
data->res.verf = &data->verf;
nfs_fattr_init(&data->fattr);
- /* Set up the initial task struct. */
- NFS_PROTO(inode)->write_setup(data, &msg);
-
- dprintk("NFS: %5u initiated write call "
- "(req %s/%lld, %u bytes @ offset %llu)\n",
- data->task.tk_pid,
- inode->i_sb->s_id,
- (long long)NFS_FILEID(inode),
- count,
- (unsigned long long)data->args.offset);
-
- task = rpc_run_task(&task_setup_data);
- if (IS_ERR(task)) {
- ret = PTR_ERR(task);
- goto out;
- }
- if (how & FLUSH_SYNC) {
- ret = rpc_wait_for_completion_task(task);
- if (ret == 0)
- ret = task->tk_status;
- }
- rpc_put_task(task);
-out:
- return ret;
+ return nfs_initiate_write(data, NFS_CLIENT(inode), call_ops, how);
}
/* If a nfs_flush_* function fails, it should remove reqs from @head and
--
1.7.2.1
next prev parent reply other threads:[~2011-02-21 17:49 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-02-21 17:49 [PATCH 0/7] pnfs write functionality (wave 4) Fred Isaman
2011-02-21 17:49 ` Fred Isaman [this message]
2011-02-21 17:49 ` [PATCH 2/7] NFSv4.1: add callback to nfs4_write_done Fred Isaman
2011-02-21 17:49 ` [PATCH 3/7] NFSv4.1: Send lseg down into nfs_write_rpcsetup Fred Isaman
2011-02-21 17:49 ` [PATCH 4/7] NFSv4.1: trigger LAYOUTGET for writes Fred Isaman
2011-02-21 18:49 ` Benny Halevy
2011-02-22 1:06 ` Fred Isaman
2011-02-22 2:14 ` Benny Halevy
2011-02-22 1:27 ` Trond Myklebust
2011-02-21 17:49 ` [PATCH 5/7] NFSv4.1: implement generic pnfs layer write switch Fred Isaman
2011-02-21 18:53 ` Benny Halevy
2011-02-22 1:17 ` Fred Isaman
2011-02-21 17:49 ` [PATCH 6/7] NFSv4.1: remove GETATTR from ds writes Fred Isaman
2011-02-21 17:49 ` [PATCH 7/7] NFSv4.1: pnfs filelayout driver write Fred Isaman
2011-02-22 19:55 ` Fred Isaman
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1298310576-13523-2-git-send-email-iisaman@netapp.com \
--to=iisaman@netapp.com \
--cc=Trond.Myklebust@netapp.com \
--cc=linux-nfs@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).