From: "J. Bruce Fields" <bfields@fieldses.org>
To: Contact <contact@ryper.org>
Cc: linux-nfs@vger.kernel.org
Subject: Re: 16+ GID issue, mountd's --manage-gids not helping
Date: Mon, 16 Sep 2013 19:20:24 -0400 [thread overview]
Message-ID: <20130916232024.GC25308@fieldses.org> (raw)
In-Reply-To: <20130916175612.012d7301@svelte.ryper.org>
On Mon, Sep 16, 2013 at 05:56:12PM -0500, Contact wrote:
> Hello,
>
> I was assuming it would grab all of my GIDs as it appears to do in the
> following link:
> https://xkyle.com/solving-the-nfs-16-group-limit-problem/
>
> Just under the quote:
> "Also, the NFS server will cache group lookups so it doesn’t have to
> continuously make queries. The cache is visible like this:"
>
> The GID 1000 is my primary user on both boxes (rypervenche).
>
> If there is another way to do this (aside maybe from setting up
> kerberos/ldap) I would be willing to try that.
Could you please answer the two questions which I asked in my previous
email?
--b.
>
> Thank you.
>
>
> On Mon, 16 Sep 2013 15:37:09 -0400
> "J. Bruce Fields" <bfields@fieldses.org> wrote:
>
> > On Mon, Sep 16, 2013 at 09:43:51AM -0500, Contact wrote:
> > > Hi all,
> > >
> > > I'm having an issue with my NFS mount and being able to access it
> > > from my normal user account. The mount point is chmod'ed to 2770
> > > with a GID of 1100 (nfs) which is the same on both systems. I can
> > > access it if I change my active group using newgrp, but not
> > > normally.
> > >
> > > ====================================
> > > noir ~ # ls -lhd /home/nfs/share
> > > drwxrws--- 8 nfs nfs 4.0K Sep 4 15:30 /home/nfs/share
> > >
> > > rypervenche@svelte ~ $ pwd
> > > /home/rypervenche
> > > rypervenche@svelte ~ $ cd nfs
> > > -su: cd: nfs: Permission denied
> > > rypervenche@svelte ~ $ newgrp nfs
> > > rypervenche@svelte ~ $ cd nfs
> > > rypervenche@svelte ~/nfs $
> > >
> > > svelte ~ # grep nfs /etc/group
> > > nfs:x:1100:rypervenche
> > > ====================================
> > >
> > > You can find the details of my NFS server and client here:
> > >
> > > ====================================
> > > svelte = client
> > > noir = server
> > >
> > > svelte ~ # tail -1 /etc/fstab
> > > 192.168.1.100:/ /home/rypervenche/nfs nfs
> > > rw,noauto,noexec,nodev,nosuid 0 0
> > >
> > > noir ~ # cat /etc/exports
> > > # /etc/exports: NFS file systems being exported. See exports(5).
> > > /home/nfs/share
> > > 192.168.1.205(rw,sync,fsid=0,no_root_squash,no_subtree_check)
> > > 192.168.2.100(rw,sync,fsid=0,no_root_squash,no_subtree_check)
> > >
> > > noir ~ # id nfs
> > > uid=1100(nfs) gid=1100(nfs) groups=1100(nfs)
> > >
> > > noir ~ # grep -v ^# /etc/conf.d/nfs | grep -v ^$
> > > NFS_NEEDED_SERVICES="rpc.idmapd"
> > > OPTS_RPC_NFSD="8"
> > > OPTS_RPC_MOUNTD="-V 4 --manage-gids -p 32767"
> > > OPTS_RPC_STATD="-p 32765 -o 32766"
> > > OPTS_RPC_IDMAPD=""
> > > OPTS_RPC_GSSD=""
> > > OPTS_RPC_SVCGSSD=""
> > > OPTS_RPC_RQUOTAD=""
> > > EXPORTFS_TIMEOUT=30
> > >
> > > noir ~ # iptables-save | egrep '(NFS|T -m conn)'
> > > -A INPUT -m conntrack --ctstate RELATED,ESTABLISHED -j ACCEPT
> > > -A INPUT -s 192.168.1.205/32 -p tcp -m tcp -m multiport --dports
> > > 111,2049,4001,32765:32767 -m conntrack --ctstate NEW -m comment
> > > --comment NFS -j ACCEPT -A INPUT -s 192.168.1.205/32 -p udp -m udp
> > > -m multiport --dports 111,2049,4001,32765:32767 -m conntrack
> > > --ctstate NEW -m comment --comment NFS -j ACCEPT -A INPUT -s
> > > 192.168.2.100/32 -p tcp -m tcp -m multiport --dports
> > > 111,2049,4001,32765:32767 -m conntrack --ctstate NEW -m comment
> > > --comment NFS -j ACCEPT -A INPUT -s 192.168.2.100/32 -p udp -m udp
> > > -m multiport --dports 111,2049,4001,32765:32767 -m conntrack
> > > --ctstate NEW -m comment --comment NFS -j ACCEPT
> > >
> > > svelte:
> > > net-fs/nfs-utils-1.2.6 was built with the following:
> > > USE="ipv6 nfsdcld nfsidmap nfsv4 nfsv41 tcpd -caps -kerberos
> > > (-selinux)"
> > >
> > > noir:
> > > net-fs/nfs-utils-1.2.6 was built with the following:
> > > USE="ipv6 (multilib) nfsdcld nfsidmap nfsv4 nfsv41 tcpd -caps
> > > -kerberos (-selinux)" ABI_X86="64"
> > >
> > > svelte ~ # uname -a
> > > Linux svelte 3.10.7-gentoo-svelte #1 SMP Thu Aug 22 17:46:44 CDT
> > > 2013 i686 Intel(R) Atom(TM) CPU N450 @ 1.66GHz GenuineIntel
> > > GNU/Linux
> > >
> > > noir ~ # uname -a
> > > Linux noir 3.10.7-gentoo-noir #1 SMP Wed Aug 28 11:19:43 CDT 2013
> > > x86_64 AMD Athlon(tm) II X2 260 Processor AuthenticAMD GNU/Linux
> > > ====================================
> > >
> > >
> > > I found online that the issue is due to NFS not being able to grab
> > > over 16 GIDs. I found help in the following two links:
> > >
> > > https://xkyle.com/solving-the-nfs-16-group-limit-problem/
> > > https://wiki.archlinux.org/index.php/NFS_Troubleshooting
> > >
> > > I tried adding the --manage-gids flag to mountd (which can be seen
> > > in the /etc/conf.d/nfs file above), however, it does not appear to
> > > resolve the issue.
> > >
> > > ====================================
> > > noir ~ #
> > > cat /proc/net/rpc/auth.unix.gid/content #uid cnt: gids...
> > > 0 10: 0 1 2 3 4 6 10 11 26 27
> > > 1000 9: 10 18 19 27 78 85 100 250 1000
> > >
> > > noir ~ # date +%s > /proc/net/rpc/auth.unix.gid/flush
> > >
> > > noir ~ #
> > > cat /proc/net/rpc/auth.unix.gid/content #uid cnt: gids...
> > >
> > > Then I mount the NFS again:
> > >
> > > noir ~ # cat /proc/net/rpc/auth.unix.gid/content
> > > #uid cnt: gids...
> > > 0 10: 0 1 2 3 4 6 10 11 26 27
> > > 1000 9: 10 18 19 27 78 85 100 250 1000
> > > ====================================
> > >
> > > It looks as though it is not grabbing all of my GIDs.
> >
> > What do you expect the list to be? Which groups is uid 1000 a member
> > of on the server?
> >
> > --b.
>
next prev parent reply other threads:[~2013-09-16 23:20 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-09-16 14:43 16+ GID issue, mountd's --manage-gids not helping Contact
2013-09-16 19:37 ` J. Bruce Fields
2013-09-16 22:56 ` Contact
2013-09-16 23:20 ` J. Bruce Fields [this message]
2013-09-17 0:38 ` J. Bruce Fields
2013-09-17 1:11 ` Contact
2013-09-17 1:59 ` Myklebust, Trond
2013-09-17 2:20 ` Contact
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20130916232024.GC25308@fieldses.org \
--to=bfields@fieldses.org \
--cc=contact@ryper.org \
--cc=linux-nfs@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).