From: Chuck Lever <chuck.lever@oracle.com>
To: Anna.Schumaker@netapp.com
Cc: linux-rdma@vger.kernel.org, linux-nfs@vger.kernel.org
Subject: [PATCH v3 16/17] SUNRPC: Clean up bc_send()
Date: Tue, 26 May 2015 11:53:42 -0400 [thread overview]
Message-ID: <20150526155342.4542.19035.stgit@manet.1015granger.net> (raw)
In-Reply-To: <20150526153926.4542.96409.stgit@manet.1015granger.net>
Clean up: Merge bc_send() into bc_svc_process().
Note: even though this touches svc.c, it is a client-side change.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Tested-By: Devesh Sharma <devesh.sharma@avagotech.com>
Reviewed-by: Doug Ledford <dledford@redhat.com>
---
include/linux/sunrpc/bc_xprt.h | 1 -
net/sunrpc/Makefile | 2 +
net/sunrpc/bc_svc.c | 63 ----------------------------------------
net/sunrpc/svc.c | 33 ++++++++++++++++-----
4 files changed, 26 insertions(+), 73 deletions(-)
delete mode 100644 net/sunrpc/bc_svc.c
diff --git a/include/linux/sunrpc/bc_xprt.h b/include/linux/sunrpc/bc_xprt.h
index 2ca67b5..8df43c9f 100644
--- a/include/linux/sunrpc/bc_xprt.h
+++ b/include/linux/sunrpc/bc_xprt.h
@@ -37,7 +37,6 @@ void xprt_complete_bc_request(struct rpc_rqst *req, uint32_t copied);
void xprt_free_bc_request(struct rpc_rqst *req);
int xprt_setup_backchannel(struct rpc_xprt *, unsigned int min_reqs);
void xprt_destroy_backchannel(struct rpc_xprt *, unsigned int max_reqs);
-int bc_send(struct rpc_rqst *req);
/*
* Determine if a shared backchannel is in use
diff --git a/net/sunrpc/Makefile b/net/sunrpc/Makefile
index 15e6f6c..1b8e68d 100644
--- a/net/sunrpc/Makefile
+++ b/net/sunrpc/Makefile
@@ -15,6 +15,6 @@ sunrpc-y := clnt.o xprt.o socklib.o xprtsock.o sched.o \
sunrpc_syms.o cache.o rpc_pipe.o \
svc_xprt.o
sunrpc-$(CONFIG_SUNRPC_DEBUG) += debugfs.o
-sunrpc-$(CONFIG_SUNRPC_BACKCHANNEL) += backchannel_rqst.o bc_svc.o
+sunrpc-$(CONFIG_SUNRPC_BACKCHANNEL) += backchannel_rqst.o
sunrpc-$(CONFIG_PROC_FS) += stats.o
sunrpc-$(CONFIG_SYSCTL) += sysctl.o
diff --git a/net/sunrpc/bc_svc.c b/net/sunrpc/bc_svc.c
deleted file mode 100644
index 15c7a8a..0000000
--- a/net/sunrpc/bc_svc.c
+++ /dev/null
@@ -1,63 +0,0 @@
-/******************************************************************************
-
-(c) 2007 Network Appliance, Inc. All Rights Reserved.
-(c) 2009 NetApp. All Rights Reserved.
-
-NetApp provides this source code under the GPL v2 License.
-The GPL v2 license is available at
-http://opensource.org/licenses/gpl-license.php.
-
-THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
-"AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
-LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
-A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR
-CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
-EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
-PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
-PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
-LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
-NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
-SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-
-******************************************************************************/
-
-/*
- * The NFSv4.1 callback service helper routines.
- * They implement the transport level processing required to send the
- * reply over an existing open connection previously established by the client.
- */
-
-#include <linux/module.h>
-
-#include <linux/sunrpc/xprt.h>
-#include <linux/sunrpc/sched.h>
-#include <linux/sunrpc/bc_xprt.h>
-
-#define RPCDBG_FACILITY RPCDBG_SVCDSP
-
-/* Empty callback ops */
-static const struct rpc_call_ops nfs41_callback_ops = {
-};
-
-
-/*
- * Send the callback reply
- */
-int bc_send(struct rpc_rqst *req)
-{
- struct rpc_task *task;
- int ret;
-
- dprintk("RPC: bc_send req= %p\n", req);
- task = rpc_run_bc_task(req, &nfs41_callback_ops);
- if (IS_ERR(task))
- ret = PTR_ERR(task);
- else {
- WARN_ON_ONCE(atomic_read(&task->tk_count) != 1);
- ret = task->tk_status;
- rpc_put_task(task);
- }
- dprintk("RPC: bc_send ret= %d\n", ret);
- return ret;
-}
-
diff --git a/net/sunrpc/svc.c b/net/sunrpc/svc.c
index 78974e4..e144902 100644
--- a/net/sunrpc/svc.c
+++ b/net/sunrpc/svc.c
@@ -1350,6 +1350,11 @@ bc_svc_process(struct svc_serv *serv, struct rpc_rqst *req,
{
struct kvec *argv = &rqstp->rq_arg.head[0];
struct kvec *resv = &rqstp->rq_res.head[0];
+ static const struct rpc_call_ops reply_ops = { };
+ struct rpc_task *task;
+ int error;
+
+ dprintk("svc: %s(%p)\n", __func__, req);
/* Build the svc_rqst used by the common processing routine */
rqstp->rq_xprt = serv->sv_bc_xprt;
@@ -1372,21 +1377,33 @@ bc_svc_process(struct svc_serv *serv, struct rpc_rqst *req,
/*
* Skip the next two words because they've already been
- * processed in the trasport
+ * processed in the transport
*/
svc_getu32(argv); /* XID */
svc_getnl(argv); /* CALLDIR */
- /* Returns 1 for send, 0 for drop */
- if (svc_process_common(rqstp, argv, resv)) {
- memcpy(&req->rq_snd_buf, &rqstp->rq_res,
- sizeof(req->rq_snd_buf));
- return bc_send(req);
- } else {
- /* drop request */
+ /* Parse and execute the bc call */
+ if (!svc_process_common(rqstp, argv, resv)) {
+ /* Processing error: drop the request */
xprt_free_bc_request(req);
return 0;
}
+
+ /* Finally, send the reply synchronously */
+ memcpy(&req->rq_snd_buf, &rqstp->rq_res, sizeof(req->rq_snd_buf));
+ task = rpc_run_bc_task(req, &reply_ops);
+ if (IS_ERR(task)) {
+ error = PTR_ERR(task);
+ goto out;
+ }
+
+ WARN_ON_ONCE(atomic_read(&task->tk_count) != 1);
+ error = task->tk_status;
+ rpc_put_task(task);
+
+out:
+ dprintk("svc: %s(), error=%d\n", __func__, error);
+ return error;
}
EXPORT_SYMBOL_GPL(bc_svc_process);
#endif /* CONFIG_SUNRPC_BACKCHANNEL */
next prev parent reply other threads:[~2015-05-26 15:53 UTC|newest]
Thread overview: 18+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-05-26 15:51 [PATCH v3 00/17] NFS/RDMA client patches for 4.2 Chuck Lever
2015-05-26 15:51 ` [PATCH v3 01/17] SUNRPC: Transport fault injection Chuck Lever
2015-05-26 15:51 ` [PATCH v3 02/17] xprtrdma: Warn when there are orphaned IB objects Chuck Lever
2015-05-26 15:51 ` [PATCH v3 03/17] xprtrdma: Replace rpcrdma_rep::rr_buffer with rr_rxprt Chuck Lever
2015-05-26 15:51 ` [PATCH v3 04/17] xprtrdma: Remove rr_func Chuck Lever
2015-05-26 15:51 ` [PATCH v3 05/17] xprtrdma: Use ib_device pointer safely Chuck Lever
2015-05-26 15:52 ` [PATCH v3 06/17] xprtrdma: Introduce helpers for allocating MWs Chuck Lever
2015-05-26 15:52 ` [PATCH v3 07/17] xprtrdma: Acquire FMRs in rpcrdma_fmr_register_external() Chuck Lever
2015-05-26 15:52 ` [PATCH v3 08/17] xprtrdma: Introduce an FRMR recovery workqueue Chuck Lever
2015-05-26 15:52 ` [PATCH v3 09/17] xprtrdma: Acquire MRs in rpcrdma_register_external() Chuck Lever
2015-05-26 15:52 ` [PATCH v3 10/17] xprtrdma: Remove unused LOCAL_INV recovery logic Chuck Lever
2015-05-26 15:52 ` [PATCH v3 11/17] xprtrdma: Remove ->ro_reset Chuck Lever
2015-05-26 15:53 ` [PATCH v3 12/17] xprtrdma: Remove rpcrdma_ia::ri_memreg_strategy Chuck Lever
2015-05-26 15:53 ` [PATCH v3 13/17] xprtrdma: Split rb_lock Chuck Lever
2015-05-26 15:53 ` [PATCH v3 14/17] xprtrdma: Stack relief in fmr_op_map() Chuck Lever
2015-05-26 15:53 ` [PATCH v3 15/17] xprtrdma: Reduce per-transport MR allocation Chuck Lever
2015-05-26 15:53 ` Chuck Lever [this message]
2015-05-26 15:53 ` [PATCH v3 17/17] NFS: Fix size of NFSACL SETACL operations Chuck Lever
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20150526155342.4542.19035.stgit@manet.1015granger.net \
--to=chuck.lever@oracle.com \
--cc=Anna.Schumaker@netapp.com \
--cc=linux-nfs@vger.kernel.org \
--cc=linux-rdma@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).