public inbox for linux-nfs@vger.kernel.org
 help / color / mirror / Atom feed
From: Chuck Lever <chuck.lever@oracle.com>
To: linux-rdma@vger.kernel.org, linux-nfs@vger.kernel.org
Subject: [PATCH v1 05/12] xprtrdma: Account for RPC/RDMA header size when deciding to inline
Date: Thu, 09 Jul 2015 16:42:27 -0400	[thread overview]
Message-ID: <20150709204227.26247.51111.stgit@manet.1015granger.net> (raw)
In-Reply-To: <20150709203242.26247.4848.stgit@manet.1015granger.net>

When marshaling RPC/RDMA requests, ensure the combined size of
RPC/RDMA header and RPC header do not exceed the inline threshold.
Endpoints typically reject RPC/RDMA messages that exceed the size
of their receive buffers.

Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
---
 net/sunrpc/xprtrdma/rpc_rdma.c |   29 +++++++++++++++++++++++++++--
 1 file changed, 27 insertions(+), 2 deletions(-)

diff --git a/net/sunrpc/xprtrdma/rpc_rdma.c b/net/sunrpc/xprtrdma/rpc_rdma.c
index 84ea37d..8cf9402 100644
--- a/net/sunrpc/xprtrdma/rpc_rdma.c
+++ b/net/sunrpc/xprtrdma/rpc_rdma.c
@@ -71,6 +71,31 @@ static const char transfertypes[][12] = {
 };
 #endif
 
+/* The client can send a request inline as long as the RPCRDMA header
+ * plus the RPC call fit under the transport's inline limit. If the
+ * combined call message size exceeds that limit, the client must use
+ * the read chunk list for this operation.
+ */
+static bool rpcrdma_args_inline(struct rpc_rqst *rqst)
+{
+	unsigned int callsize = RPCRDMA_HDRLEN_MIN + rqst->rq_snd_buf.len;
+
+	return callsize <= RPCRDMA_INLINE_WRITE_THRESHOLD(rqst);
+}
+
+/* The client can’t know how large the actual reply will be. Thus it
+ * plans for the largest possible reply for that particular ULP
+ * operation. If the maximum combined reply message size exceeds that
+ * limit, the client must provide a write list or a reply chunk for
+ * this request.
+ */
+static bool rpcrdma_results_inline(struct rpc_rqst *rqst)
+{
+	unsigned int repsize = RPCRDMA_HDRLEN_MIN + rqst->rq_rcv_buf.buflen;
+
+	return repsize <= RPCRDMA_INLINE_READ_THRESHOLD(rqst);
+}
+
 /*
  * Chunk assembly from upper layer xdr_buf.
  *
@@ -418,7 +443,7 @@ rpcrdma_marshal_req(struct rpc_rqst *rqst)
 	 * a READ, then use write chunks to separate the file data
 	 * into pages; otherwise use reply chunks.
 	 */
-	if (rqst->rq_rcv_buf.buflen <= RPCRDMA_INLINE_READ_THRESHOLD(rqst))
+	if (rpcrdma_results_inline(rqst))
 		wtype = rpcrdma_noch;
 	else if (rqst->rq_rcv_buf.page_len == 0)
 		wtype = rpcrdma_replych;
@@ -441,7 +466,7 @@ rpcrdma_marshal_req(struct rpc_rqst *rqst)
 	 * implies the op is a write.
 	 * TBD check NFSv4 setacl
 	 */
-	if (rqst->rq_snd_buf.len <= RPCRDMA_INLINE_WRITE_THRESHOLD(rqst))
+	if (rpcrdma_args_inline(rqst))
 		rtype = rpcrdma_noch;
 	else if (rqst->rq_snd_buf.page_len == 0)
 		rtype = rpcrdma_areadch;


  parent reply	other threads:[~2015-07-09 20:42 UTC|newest]

Thread overview: 46+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-07-09 20:41 [PATCH v1 00/12] NFS/RDMA client side for Linux 4.3 Chuck Lever
2015-07-09 20:41 ` [PATCH v1 01/12] xprtrdma: Make xprt_setup_rdma() agnostic to family of server address Chuck Lever
2015-07-09 20:41 ` [PATCH v1 02/12] xprtrdma: Raise maximum payload size to one megabyte Chuck Lever
2015-07-10 10:25   ` Devesh Sharma
2015-07-10 19:21   ` Anna Schumaker
2015-07-10 19:33     ` Chuck Lever
2015-07-10 19:41       ` Anna Schumaker
2015-07-12 14:31   ` Sagi Grimberg
2015-07-09 20:42 ` [PATCH v1 03/12] xprtrdma: Increase default credit limit Chuck Lever
2015-07-10 10:45   ` Devesh Sharma
2015-07-10 14:33     ` Chuck Lever
2015-07-10 14:47       ` Devesh Sharma
2015-07-12 14:31   ` Sagi Grimberg
2015-07-09 20:42 ` [PATCH v1 04/12] xprtrdma: Remove last ib_reg_phys_mr() call site Chuck Lever
2015-07-10 10:52   ` Devesh Sharma
2015-07-11 10:34   ` Christoph Hellwig
2015-07-11 18:50     ` Chuck Lever
2015-07-12  7:58       ` Christoph Hellwig
2015-07-12 14:31   ` Sagi Grimberg
2015-07-09 20:42 ` Chuck Lever [this message]
2015-07-10 10:55   ` [PATCH v1 05/12] xprtrdma: Account for RPC/RDMA header size when deciding to inline Devesh Sharma
2015-07-10 20:08   ` Anna Schumaker
2015-07-10 20:28     ` Chuck Lever
2015-07-12 14:37   ` Sagi Grimberg
2015-07-12 17:52     ` Chuck Lever
2015-07-09 20:42 ` [PATCH v1 06/12] xprtrdma: Always provide a write list when sending NFS READ Chuck Lever
2015-07-10 11:08   ` Devesh Sharma
2015-07-12 14:42   ` Sagi Grimberg
2015-07-09 20:42 ` [PATCH v1 07/12] xprtrdma: Don't provide a reply chunk when expecting a short reply Chuck Lever
2015-07-12 14:58   ` Sagi Grimberg
2015-07-12 18:38     ` Chuck Lever
2015-07-14  9:54       ` Sagi Grimberg
2015-07-09 20:42 ` [PATCH v1 08/12] xprtrdma: Fix XDR tail buffer marshalling Chuck Lever
2015-07-09 20:43 ` [PATCH v1 09/12] xprtrdma: Prepare rpcrdma_ep_post() for RDMA_NOMSG calls Chuck Lever
2015-07-10 11:29   ` Devesh Sharma
2015-07-10 12:58     ` Tom Talpey
2015-07-10 14:11       ` Devesh Sharma
2015-07-10 14:53         ` Chuck Lever
2015-07-10 22:44           ` Jason Gunthorpe
2015-07-10 20:43   ` Anna Schumaker
2015-07-10 20:52     ` Chuck Lever
2015-07-09 20:43 ` [PATCH v1 10/12] xprtrdma: Fix large NFS SYMLINK calls Chuck Lever
2015-07-14 16:01   ` Anna Schumaker
2015-07-14 19:09     ` Chuck Lever
2015-07-09 20:43 ` [PATCH v1 11/12] xprtrdma: Clean up xprt_rdma_print_stats() Chuck Lever
2015-07-09 20:43 ` [PATCH v1 12/12] xprtrdma: Count RDMA_NOMSG type calls Chuck Lever

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20150709204227.26247.51111.stgit@manet.1015granger.net \
    --to=chuck.lever@oracle.com \
    --cc=linux-nfs@vger.kernel.org \
    --cc=linux-rdma@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox