From: bfields@fieldses.org (J. Bruce Fields)
To: Trond Myklebust <trond.myklebust@primarydata.com>
Cc: linux-nfs@vger.kernel.org
Subject: Re: [RFC PATCH v3 00/13] Basic multipathing support and demonstrator
Date: Mon, 1 Feb 2016 15:48:25 -0500 [thread overview]
Message-ID: <20160201204825.GD5499@fieldses.org> (raw)
In-Reply-To: <1454347277-10997-1-git-send-email-trond.myklebust@primarydata.com>
On Mon, Feb 01, 2016 at 12:21:04PM -0500, Trond Myklebust wrote:
> The following patchset is intended as an RFC to demonstrate how we could
> implement multipathing in NFS.
> It adds basic support for attaching multiple RPC transports to a client,
> an embryonic policy mechanism for switching tasks across those transports
> (with a round-robin policy implementation), as well as helpers to allow
> iteration of tasks across all tranports (for instance in order to
> support NFSv4.1's BIND_CONN_TO_SESSION).
>
> A lot of polish and finishing touches are missing. For instance, I have yet
> to add support in debugfs for these transports, and there is no support
> for mounting with NFSv4.1 session trunking. However there is a demonstrator
> that implements pNFS multipathing over NFSv3. Adding support for NFSv4.1
> requires that you call EXCHANGE_ID to allow verification of the
> major/minor server and scopeid fields, which should not be too hard.
>
> More to come, but in the meantime, comments are welcome...
Since your prototype is doing round-robin per task, I assume the
motivating problem is that you don't want to waste bandwidth when
there's multiple links available. Is that right, or is there some other
goal you have in mind?
--b.
>
> Cheers
> Trond
>
> --------------
> v2 & v3: Fix up kbuild warnings
>
> Trond Myklebust (13):
> SUNRPC: Remove unused function rpc_task_reset_client
> SUNRPC: Reorder rpc_task to put waitqueue related info in same
> cachelines
> SUNRPC: Uninline xprt_get(); It isn't performance critical.
> SUNRPC: Make freeing of struct xprt rcu-safe
> SUNRPC: Add a structure to track multiple transports
> SUNRPC: Make rpc_clnt store the multipath iterators
> SUNRPC: Use the multipath iterator to assign a transport to each task
> SUNRPC: Allow caller to specify the transport to use
> SUNRPC: Add a helper to apply a function to all the rpc_clnt's
> transports
> SUNRPC: Make NFS swap work with multipath
> NFSv4.1: nfs4_proc_bind_conn_to_session must iterate over all
> connections
> SUNRPC: Allow addition of new transports to a struct rpc_clnt
> pnfs/NFSv4.1: Add multipath capabilities to pNFS flexfiles servers
> over NFSv3
>
> fs/nfs/nfs4proc.c | 51 +++-
> fs/nfs/pnfs_nfs.c | 16 +-
> include/linux/sunrpc/clnt.h | 18 +-
> include/linux/sunrpc/sched.h | 32 +--
> include/linux/sunrpc/xprt.h | 22 +-
> include/linux/sunrpc/xprtmultipath.h | 69 +++++
> net/sunrpc/Makefile | 3 +-
> net/sunrpc/auth_gss/auth_gss.c | 4 +-
> net/sunrpc/clnt.c | 326 ++++++++++++++++++------
> net/sunrpc/rpcb_clnt.c | 10 +-
> net/sunrpc/sched.c | 2 +
> net/sunrpc/xprt.c | 42 ++--
> net/sunrpc/xprtmultipath.c | 473 +++++++++++++++++++++++++++++++++++
> net/sunrpc/xprtsock.c | 4 +-
> 14 files changed, 938 insertions(+), 134 deletions(-)
> create mode 100644 include/linux/sunrpc/xprtmultipath.h
> create mode 100644 net/sunrpc/xprtmultipath.c
>
> --
> 2.5.0
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-nfs" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
next prev parent reply other threads:[~2016-02-01 20:48 UTC|newest]
Thread overview: 18+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-02-01 17:21 [RFC PATCH v3 00/13] Basic multipathing support and demonstrator Trond Myklebust
2016-02-01 17:21 ` [RFC PATCH v3 01/13] SUNRPC: Remove unused function rpc_task_reset_client Trond Myklebust
2016-02-01 17:21 ` [RFC PATCH v3 02/13] SUNRPC: Reorder rpc_task to put waitqueue related info in same cachelines Trond Myklebust
2016-02-01 17:21 ` [RFC PATCH v3 03/13] SUNRPC: Uninline xprt_get(); It isn't performance critical Trond Myklebust
2016-02-01 17:21 ` [RFC PATCH v3 04/13] SUNRPC: Make freeing of struct xprt rcu-safe Trond Myklebust
2016-02-01 17:21 ` [RFC PATCH v3 05/13] SUNRPC: Add a structure to track multiple transports Trond Myklebust
2016-02-01 17:21 ` [RFC PATCH v3 06/13] SUNRPC: Make rpc_clnt store the multipath iterators Trond Myklebust
2016-02-01 17:21 ` [RFC PATCH v3 07/13] SUNRPC: Use the multipath iterator to assign a transport to each task Trond Myklebust
2016-02-01 17:21 ` [RFC PATCH v3 08/13] SUNRPC: Allow caller to specify the transport to use Trond Myklebust
2016-02-01 17:21 ` [RFC PATCH v3 09/13] SUNRPC: Add a helper to apply a function to all the rpc_clnt's transports Trond Myklebust
2016-02-01 17:21 ` [RFC PATCH v3 10/13] SUNRPC: Make NFS swap work with multipath Trond Myklebust
2016-02-01 17:21 ` [RFC PATCH v3 11/13] NFSv4.1: nfs4_proc_bind_conn_to_session must iterate over all connections Trond Myklebust
2016-02-01 17:21 ` [RFC PATCH v3 12/13] SUNRPC: Allow addition of new transports to a struct rpc_clnt Trond Myklebust
2016-02-01 17:21 ` [RFC PATCH v3 13/13] pnfs/NFSv4.1: Add multipath capabilities to pNFS flexfiles servers over NFSv3 Trond Myklebust
2016-02-01 17:31 ` Matt W. Benjamin
2016-02-01 20:48 ` J. Bruce Fields [this message]
2016-02-01 21:12 ` [RFC PATCH v3 00/13] Basic multipathing support and demonstrator Trond Myklebust
2016-02-01 21:54 ` Tom Talpey
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20160201204825.GD5499@fieldses.org \
--to=bfields@fieldses.org \
--cc=linux-nfs@vger.kernel.org \
--cc=trond.myklebust@primarydata.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).