linux-nfs.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Chuck Lever <chuck.lever@oracle.com>
To: linux-rdma@vger.kernel.org, linux-nfs@vger.kernel.org
Subject: [PATCH v3 20/25] xprtrdma: Update only specific fields in private receive buffer
Date: Mon, 20 Jun 2016 12:11:19 -0400	[thread overview]
Message-ID: <20160620161118.10809.42331.stgit@manet.1015granger.net> (raw)
In-Reply-To: <20160620155751.10809.22262.stgit@manet.1015granger.net>

Now that rpcrdma_inline_fixup() updates only two fields in
rq_rcv_buf, a full memcpy of that structure to rq_private_buf is
unwarranted. Updating rq_private_buf fields only where needed also
better documents what is going on.

Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
---
 net/sunrpc/xprtrdma/rpc_rdma.c |   13 +++++++++----
 1 file changed, 9 insertions(+), 4 deletions(-)

diff --git a/net/sunrpc/xprtrdma/rpc_rdma.c b/net/sunrpc/xprtrdma/rpc_rdma.c
index d018eb7..a0e811d 100644
--- a/net/sunrpc/xprtrdma/rpc_rdma.c
+++ b/net/sunrpc/xprtrdma/rpc_rdma.c
@@ -750,6 +750,11 @@ rpcrdma_count_chunks(struct rpcrdma_rep *rep, int wrchunk, __be32 **iptrp)
  * The upper layer has set the maximum number of bytes it can
  * receive in each component of rq_rcv_buf. These values are set in
  * the head.iov_len, page_len, tail.iov_len, and buflen fields.
+ *
+ * Unlike the TCP equivalent (xdr_partial_copy_from_skb), in
+ * many cases this function simply updates iov_base pointers in
+ * rq_rcv_buf to point directly to the received reply data, to
+ * avoid copying reply data.
  */
 static void
 rpcrdma_inline_fixup(struct rpc_rqst *rqst, char *srcp, int copy_len, int pad)
@@ -763,6 +768,7 @@ rpcrdma_inline_fixup(struct rpc_rqst *rqst, char *srcp, int copy_len, int pad)
 	 * in the receive buffer, to avoid a memcopy.
 	 */
 	rqst->rq_rcv_buf.head[0].iov_base = srcp;
+	rqst->rq_private_buf.head[0].iov_base = srcp;
 
 	/* The contents of the receive buffer that follow
 	 * head.iov_len bytes are copied into the page list.
@@ -822,16 +828,15 @@ rpcrdma_inline_fixup(struct rpc_rqst *rqst, char *srcp, int copy_len, int pad)
 	/* The tail iovec is redirected to the remaining data
 	 * in the receive buffer, to avoid a memcopy.
 	 */
-	if (copy_len || pad)
+	if (copy_len || pad) {
 		rqst->rq_rcv_buf.tail[0].iov_base = srcp;
+		rqst->rq_private_buf.tail[0].iov_base = srcp;
+	}
 
 	if (copy_len)
 		dprintk("RPC:       %s: %d bytes in"
 			" %d extra segments (%d lost)\n",
 			__func__, olen, i, copy_len);
-
-	/* TBD avoid a warning from call_decode() */
-	rqst->rq_private_buf = rqst->rq_rcv_buf;
 }
 
 void


  parent reply	other threads:[~2016-06-20 16:25 UTC|newest]

Thread overview: 40+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-06-20 16:08 [PATCH v3 00/25] NFS/RDMA client patches proposed for v4.8 Chuck Lever
2016-06-20 16:08 ` [PATCH v3 01/25] xprtrdma: Remove FMRs from the unmap list after unmapping Chuck Lever
2016-06-27 17:47   ` Anna Schumaker
2016-06-28 20:53     ` Chuck Lever
2016-06-20 16:08 ` [PATCH v3 02/25] xprtrdma: Create common scatterlist fields in rpcrdma_mw Chuck Lever
2016-06-20 16:08 ` [PATCH v3 03/25] xprtrdma: Move init and release helpers Chuck Lever
2016-06-20 16:09 ` [PATCH v3 04/25] xprtrdma: Rename fields in rpcrdma_fmr Chuck Lever
2016-06-20 16:09 ` [PATCH v3 05/25] xprtrdma: Use scatterlist for DMA mapping and unmapping under FMR Chuck Lever
2016-06-20 16:09 ` [PATCH v3 06/25] xprtrdma: Refactor MR recovery work queues Chuck Lever
2016-06-20 16:09 ` [PATCH v3 07/25] xprtrdma: Do not leak an MW during a DMA map failure Chuck Lever
2016-06-20 16:09 ` [PATCH v3 08/25] xprtrdma: Remove ALLPHYSICAL memory registration mode Chuck Lever
2016-06-20 16:09 ` [PATCH v3 09/25] xprtrdma: Remove rpcrdma_map_one() and friends Chuck Lever
2016-06-20 16:09 ` [PATCH v3 10/25] xprtrdma: Clean up device capability detection Chuck Lever
2016-06-20 16:10 ` [PATCH v3 11/25] xprtrdma: Reply buffer exhaustion can be catastrophic Chuck Lever
2016-06-20 16:10 ` [PATCH v3 12/25] xprtrdma: Honor ->send_request API contract Chuck Lever
2016-06-20 16:10 ` [PATCH v3 13/25] xprtrdma: Chunk list encoders must not return zero Chuck Lever
2016-06-20 16:10 ` [PATCH v3 14/25] xprtrdma: Allocate MRs on demand Chuck Lever
2016-06-20 16:10 ` [PATCH v3 15/25] xprtrdma: Release orphaned MRs immediately Chuck Lever
2016-06-20 16:10 ` [PATCH v3 16/25] xprtrdma: Place registered MWs on a per-req list Chuck Lever
2016-06-20 16:10 ` [PATCH v3 17/25] xprtrdma: Chunk list encoders no longer share one rl_segments array Chuck Lever
2016-06-20 16:11 ` [PATCH v3 18/25] xprtrdma: rpcrdma_inline_fixup() overruns the receive page list Chuck Lever
2016-06-20 16:11 ` [PATCH v3 19/25] xprtrdma: Do not update {head, tail}.iov_len in rpcrdma_inline_fixup() Chuck Lever
2016-06-20 16:11 ` Chuck Lever [this message]
2016-06-20 16:11 ` [PATCH v3 21/25] xprtrdma: Clean up fixup_copy_count accounting Chuck Lever
2016-06-20 16:11 ` [PATCH v3 22/25] xprtrdma: No direct data placement with krb5i and krb5p Chuck Lever
2016-06-20 16:11 ` [PATCH v3 23/25] svc: Avoid garbage replies when pc_func() returns rpc_drop_reply Chuck Lever
2016-06-20 16:11 ` [PATCH v3 24/25] NFS: Don't drop CB requests with invalid principals Chuck Lever
2016-06-20 16:12 ` [PATCH v3 25/25] IB/mlx4: Workaround for mlx4_alloc_priv_pages() array allocator Chuck Lever
2016-06-21  5:52   ` Or Gerlitz
2016-06-22 13:29     ` Sagi Grimberg
2016-06-22 13:47       ` Or Gerlitz
2016-06-22 14:02         ` Sagi Grimberg
2016-06-22 11:56   ` Sagi Grimberg
2016-06-22 14:04   ` Sagi Grimberg
2016-06-22 14:09     ` Leon Romanovsky
2016-06-22 14:47     ` Chuck Lever
2016-06-22 15:50       ` Leon Romanovsky
2016-06-22 16:20         ` Christoph Hellwig
2016-06-20 18:53 ` [PATCH v3 00/25] NFS/RDMA client patches proposed for v4.8 Steve Wise
2016-06-20 19:07   ` Chuck Lever

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20160620161118.10809.42331.stgit@manet.1015granger.net \
    --to=chuck.lever@oracle.com \
    --cc=linux-nfs@vger.kernel.org \
    --cc=linux-rdma@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).