From: Chuck Lever <chuck.lever@oracle.com>
To: linux-rdma@vger.kernel.org, linux-nfs@vger.kernel.org
Subject: [PATCH v3 21/25] xprtrdma: Clean up fixup_copy_count accounting
Date: Mon, 20 Jun 2016 12:11:27 -0400 [thread overview]
Message-ID: <20160620161127.10809.14506.stgit@manet.1015granger.net> (raw)
In-Reply-To: <20160620155751.10809.22262.stgit@manet.1015granger.net>
fixup_copy_count should count only the number of bytes copied to the
page list. The head and tail are now always handled without a data
copy.
And the debugging at the end of rpcrdma_inline_fixup() is also no
longer necessary, since copy_len will be non-zero when there is reply
data in the tail (a normal and valid case).
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
---
net/sunrpc/xprtrdma/rpc_rdma.c | 26 +++++++++++++-------------
1 file changed, 13 insertions(+), 13 deletions(-)
diff --git a/net/sunrpc/xprtrdma/rpc_rdma.c b/net/sunrpc/xprtrdma/rpc_rdma.c
index a0e811d..dac2990 100644
--- a/net/sunrpc/xprtrdma/rpc_rdma.c
+++ b/net/sunrpc/xprtrdma/rpc_rdma.c
@@ -755,11 +755,14 @@ rpcrdma_count_chunks(struct rpcrdma_rep *rep, int wrchunk, __be32 **iptrp)
* many cases this function simply updates iov_base pointers in
* rq_rcv_buf to point directly to the received reply data, to
* avoid copying reply data.
+ *
+ * Returns the count of bytes which had to be memcopied.
*/
-static void
+static unsigned long
rpcrdma_inline_fixup(struct rpc_rqst *rqst, char *srcp, int copy_len, int pad)
{
- int i, npages, curlen, olen;
+ unsigned long fixup_copy_count;
+ int i, npages, curlen;
char *destp;
struct page **ppages;
int page_base;
@@ -781,13 +784,10 @@ rpcrdma_inline_fixup(struct rpc_rqst *rqst, char *srcp, int copy_len, int pad)
srcp += curlen;
copy_len -= curlen;
- olen = copy_len;
- i = 0;
- rpcx_to_rdmax(rqst->rq_xprt)->rx_stats.fixup_copy_count += olen;
page_base = rqst->rq_rcv_buf.page_base;
ppages = rqst->rq_rcv_buf.pages + (page_base >> PAGE_SHIFT);
page_base &= ~PAGE_MASK;
-
+ fixup_copy_count = 0;
if (copy_len && rqst->rq_rcv_buf.page_len) {
int pagelist_len;
@@ -795,7 +795,7 @@ rpcrdma_inline_fixup(struct rpc_rqst *rqst, char *srcp, int copy_len, int pad)
if (pagelist_len > copy_len)
pagelist_len = copy_len;
npages = PAGE_ALIGN(page_base + pagelist_len) >> PAGE_SHIFT;
- for (; i < npages; i++) {
+ for (i = 0; i < npages; i++) {
curlen = PAGE_SIZE - page_base;
if (curlen > pagelist_len)
curlen = pagelist_len;
@@ -809,6 +809,7 @@ rpcrdma_inline_fixup(struct rpc_rqst *rqst, char *srcp, int copy_len, int pad)
kunmap_atomic(destp);
srcp += curlen;
copy_len -= curlen;
+ fixup_copy_count += curlen;
pagelist_len -= curlen;
if (!pagelist_len)
break;
@@ -833,10 +834,7 @@ rpcrdma_inline_fixup(struct rpc_rqst *rqst, char *srcp, int copy_len, int pad)
rqst->rq_private_buf.tail[0].iov_base = srcp;
}
- if (copy_len)
- dprintk("RPC: %s: %d bytes in"
- " %d extra segments (%d lost)\n",
- __func__, olen, i, copy_len);
+ return fixup_copy_count;
}
void
@@ -999,8 +997,10 @@ rpcrdma_reply_handler(struct rpcrdma_rep *rep)
rep->rr_len -= RPCRDMA_HDRLEN_MIN;
status = rep->rr_len;
}
- /* Fix up the rpc results for upper layer */
- rpcrdma_inline_fixup(rqst, (char *)iptr, rep->rr_len, rdmalen);
+
+ r_xprt->rx_stats.fixup_copy_count +=
+ rpcrdma_inline_fixup(rqst, (char *)iptr, rep->rr_len,
+ rdmalen);
break;
case rdma_nomsg:
next prev parent reply other threads:[~2016-06-20 16:25 UTC|newest]
Thread overview: 40+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-06-20 16:08 [PATCH v3 00/25] NFS/RDMA client patches proposed for v4.8 Chuck Lever
2016-06-20 16:08 ` [PATCH v3 01/25] xprtrdma: Remove FMRs from the unmap list after unmapping Chuck Lever
2016-06-27 17:47 ` Anna Schumaker
2016-06-28 20:53 ` Chuck Lever
2016-06-20 16:08 ` [PATCH v3 02/25] xprtrdma: Create common scatterlist fields in rpcrdma_mw Chuck Lever
2016-06-20 16:08 ` [PATCH v3 03/25] xprtrdma: Move init and release helpers Chuck Lever
2016-06-20 16:09 ` [PATCH v3 04/25] xprtrdma: Rename fields in rpcrdma_fmr Chuck Lever
2016-06-20 16:09 ` [PATCH v3 05/25] xprtrdma: Use scatterlist for DMA mapping and unmapping under FMR Chuck Lever
2016-06-20 16:09 ` [PATCH v3 06/25] xprtrdma: Refactor MR recovery work queues Chuck Lever
2016-06-20 16:09 ` [PATCH v3 07/25] xprtrdma: Do not leak an MW during a DMA map failure Chuck Lever
2016-06-20 16:09 ` [PATCH v3 08/25] xprtrdma: Remove ALLPHYSICAL memory registration mode Chuck Lever
2016-06-20 16:09 ` [PATCH v3 09/25] xprtrdma: Remove rpcrdma_map_one() and friends Chuck Lever
2016-06-20 16:09 ` [PATCH v3 10/25] xprtrdma: Clean up device capability detection Chuck Lever
2016-06-20 16:10 ` [PATCH v3 11/25] xprtrdma: Reply buffer exhaustion can be catastrophic Chuck Lever
2016-06-20 16:10 ` [PATCH v3 12/25] xprtrdma: Honor ->send_request API contract Chuck Lever
2016-06-20 16:10 ` [PATCH v3 13/25] xprtrdma: Chunk list encoders must not return zero Chuck Lever
2016-06-20 16:10 ` [PATCH v3 14/25] xprtrdma: Allocate MRs on demand Chuck Lever
2016-06-20 16:10 ` [PATCH v3 15/25] xprtrdma: Release orphaned MRs immediately Chuck Lever
2016-06-20 16:10 ` [PATCH v3 16/25] xprtrdma: Place registered MWs on a per-req list Chuck Lever
2016-06-20 16:10 ` [PATCH v3 17/25] xprtrdma: Chunk list encoders no longer share one rl_segments array Chuck Lever
2016-06-20 16:11 ` [PATCH v3 18/25] xprtrdma: rpcrdma_inline_fixup() overruns the receive page list Chuck Lever
2016-06-20 16:11 ` [PATCH v3 19/25] xprtrdma: Do not update {head, tail}.iov_len in rpcrdma_inline_fixup() Chuck Lever
2016-06-20 16:11 ` [PATCH v3 20/25] xprtrdma: Update only specific fields in private receive buffer Chuck Lever
2016-06-20 16:11 ` Chuck Lever [this message]
2016-06-20 16:11 ` [PATCH v3 22/25] xprtrdma: No direct data placement with krb5i and krb5p Chuck Lever
2016-06-20 16:11 ` [PATCH v3 23/25] svc: Avoid garbage replies when pc_func() returns rpc_drop_reply Chuck Lever
2016-06-20 16:11 ` [PATCH v3 24/25] NFS: Don't drop CB requests with invalid principals Chuck Lever
2016-06-20 16:12 ` [PATCH v3 25/25] IB/mlx4: Workaround for mlx4_alloc_priv_pages() array allocator Chuck Lever
2016-06-21 5:52 ` Or Gerlitz
2016-06-22 13:29 ` Sagi Grimberg
2016-06-22 13:47 ` Or Gerlitz
2016-06-22 14:02 ` Sagi Grimberg
2016-06-22 11:56 ` Sagi Grimberg
2016-06-22 14:04 ` Sagi Grimberg
2016-06-22 14:09 ` Leon Romanovsky
2016-06-22 14:47 ` Chuck Lever
2016-06-22 15:50 ` Leon Romanovsky
2016-06-22 16:20 ` Christoph Hellwig
2016-06-20 18:53 ` [PATCH v3 00/25] NFS/RDMA client patches proposed for v4.8 Steve Wise
2016-06-20 19:07 ` Chuck Lever
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20160620161127.10809.14506.stgit@manet.1015granger.net \
--to=chuck.lever@oracle.com \
--cc=linux-nfs@vger.kernel.org \
--cc=linux-rdma@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).