From: Chuck Lever <chuck.lever@oracle.com>
To: linux-rdma@vger.kernel.org, linux-nfs@vger.kernel.org
Subject: [PATCH v1 09/11] xprtrdma: Refactor rpcrdma_ep_connect
Date: Fri, 10 Mar 2017 11:07:01 -0500 [thread overview]
Message-ID: <20170310160701.6314.53213.stgit@manet.1015granger.net> (raw)
In-Reply-To: <20170310154131.6314.35201.stgit@manet.1015granger.net>
I'm about to add another arm to
if (ep->rep_connected != 0)
It will be cleaner to use a switch statement here. We'll be looking
for a couple of specific errnos, or "anything else," basically to
sort out the difference between a normal reconnect and recovery from
device removal.
Also, adjust the retry label to accommodate some locking I'm about
to introduce.
This is a refactoring change only.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
---
net/sunrpc/xprtrdma/verbs.c | 109 +++++++++++++++++++++++++------------------
1 file changed, 63 insertions(+), 46 deletions(-)
diff --git a/net/sunrpc/xprtrdma/verbs.c b/net/sunrpc/xprtrdma/verbs.c
index 5bfefee..6a12386 100644
--- a/net/sunrpc/xprtrdma/verbs.c
+++ b/net/sunrpc/xprtrdma/verbs.c
@@ -710,6 +710,57 @@ static void rpcrdma_destroy_id(struct rdma_cm_id *id)
ib_free_cq(ep->rep_attr.send_cq);
}
+static int
+rpcrdma_ep_reconnect(struct rpcrdma_xprt *r_xprt, struct rpcrdma_ep *ep,
+ struct rpcrdma_ia *ia)
+{
+ struct sockaddr *sap = (struct sockaddr *)&r_xprt->rx_data.addr;
+ struct rdma_cm_id *id, *old;
+ int err, rc;
+
+ dprintk("RPC: %s: reconnecting...\n", __func__);
+
+ rpcrdma_ep_disconnect(ep, ia);
+
+ rc = -EHOSTUNREACH;
+ id = rpcrdma_create_id(r_xprt, ia, sap);
+ if (IS_ERR(id))
+ goto out;
+
+ /* As long as the new ID points to the same device as the
+ * old ID, we can reuse the transport's existing PD and all
+ * previously allocated MRs. Also, the same device means
+ * the transport's previous DMA mappings are still valid.
+ *
+ * This is a sanity check only. There should be no way these
+ * point to two different devices here.
+ */
+ old = id;
+ rc = -ENETUNREACH;
+ if (ia->ri_device != id->device) {
+ pr_err("rpcrdma: can't reconnect on different device!\n");
+ goto out_destroy;
+ }
+
+ err = rdma_create_qp(id, ia->ri_pd, &ep->rep_attr);
+ if (err) {
+ dprintk("RPC: %s: rdma_create_qp returned %d\n",
+ __func__, err);
+ goto out_destroy;
+ }
+
+ /* Atomically replace the transport's ID and QP. */
+ rc = 0;
+ old = ia->ri_id;
+ ia->ri_id = id;
+ rdma_destroy_qp(old);
+
+out_destroy:
+ rpcrdma_destroy_id(old);
+out:
+ return rc;
+}
+
/*
* Connect unconnected endpoint.
*/
@@ -718,61 +769,25 @@ static void rpcrdma_destroy_id(struct rdma_cm_id *id)
{
struct rpcrdma_xprt *r_xprt = container_of(ia, struct rpcrdma_xprt,
rx_ia);
- struct rdma_cm_id *id, *old;
- struct sockaddr *sap;
unsigned int extras;
- int rc = 0;
+ int rc;
- if (ep->rep_connected != 0) {
retry:
- dprintk("RPC: %s: reconnecting...\n", __func__);
-
- rpcrdma_ep_disconnect(ep, ia);
-
- sap = (struct sockaddr *)&r_xprt->rx_data.addr;
- id = rpcrdma_create_id(r_xprt, ia, sap);
- if (IS_ERR(id)) {
- rc = -EHOSTUNREACH;
- goto out;
- }
- /* TEMP TEMP TEMP - fail if new device:
- * Deregister/remarshal *all* requests!
- * Close and recreate adapter, pd, etc!
- * Re-determine all attributes still sane!
- * More stuff I haven't thought of!
- * Rrrgh!
- */
- if (ia->ri_device != id->device) {
- printk("RPC: %s: can't reconnect on "
- "different device!\n", __func__);
- rpcrdma_destroy_id(id);
- rc = -ENETUNREACH;
- goto out;
- }
- /* END TEMP */
- rc = rdma_create_qp(id, ia->ri_pd, &ep->rep_attr);
- if (rc) {
- dprintk("RPC: %s: rdma_create_qp failed %i\n",
- __func__, rc);
- rpcrdma_destroy_id(id);
- rc = -ENETUNREACH;
- goto out;
- }
-
- old = ia->ri_id;
- ia->ri_id = id;
-
- rdma_destroy_qp(old);
- rpcrdma_destroy_id(old);
- } else {
+ switch (ep->rep_connected) {
+ case 0:
dprintk("RPC: %s: connecting...\n", __func__);
rc = rdma_create_qp(ia->ri_id, ia->ri_pd, &ep->rep_attr);
if (rc) {
dprintk("RPC: %s: rdma_create_qp failed %i\n",
__func__, rc);
- /* do not update ep->rep_connected */
- return -ENETUNREACH;
+ rc = -ENETUNREACH;
+ goto out_noupdate;
}
+ break;
+ default:
+ rc = rpcrdma_ep_reconnect(r_xprt, ep, ia);
+ if (rc)
+ goto out;
}
ep->rep_connected = 0;
@@ -800,6 +815,8 @@ static void rpcrdma_destroy_id(struct rdma_cm_id *id)
out:
if (rc)
ep->rep_connected = rc;
+
+out_noupdate:
return rc;
}
next prev parent reply other threads:[~2017-03-10 16:07 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-03-10 16:05 [PATCH v1 00/11] [RFC] NFS/RDMA client-side patches for 4.12 Chuck Lever
2017-03-10 16:05 ` [PATCH v1 01/11] xprtrdma: Annotate receive workqueue Chuck Lever
2017-03-10 16:06 ` [PATCH v1 02/11] xprtrdma: Cancel refresh worker during buffer shutdown Chuck Lever
2017-03-10 16:06 ` [PATCH v1 03/11] xprtrdma: Clean up rpcrdma_marshal_req() Chuck Lever
2017-03-10 16:06 ` [PATCH v1 04/11] sunrpc: Export xprt_force_disconnect() Chuck Lever
2017-03-10 16:06 ` [PATCH v1 05/11] xprtrdma: Detect unreachable NFS/RDMA servers more reliably Chuck Lever
2017-03-10 16:06 ` [PATCH v1 06/11] xprtrdma: Refactor rpcrdma_ia_open() Chuck Lever
2017-03-10 16:06 ` [PATCH v1 07/11] xprtrdma: Use same device when mapping or syncing DMA buffers Chuck Lever
2017-03-10 16:06 ` [PATCH v1 08/11] xprtrdma: Support unplugging an HCA from under an NFS mount Chuck Lever
2017-03-10 16:07 ` Chuck Lever [this message]
2017-03-10 16:07 ` [PATCH v1 10/11] xprtrdma: Restore transport after device removal Chuck Lever
2017-03-10 16:07 ` [PATCH v1 11/11] xprtrdma: Revert commit d0f36c46deea Chuck Lever
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20170310160701.6314.53213.stgit@manet.1015granger.net \
--to=chuck.lever@oracle.com \
--cc=linux-nfs@vger.kernel.org \
--cc=linux-rdma@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).