* [PATCH] svcrdma: Enqueue after setting XPT_CLOSE in completion handlers
@ 2017-10-27 14:49 Chuck Lever
2017-10-28 7:43 ` Devesh Sharma
0 siblings, 1 reply; 5+ messages in thread
From: Chuck Lever @ 2017-10-27 14:49 UTC (permalink / raw)
To: bfields; +Cc: linux-rdma, linux-nfs
I noticed the server was sometimes not closing the connection after
a flushed Send. For example, if the client responds with an RNR NAK
to a Reply from the server, that client might be deadlocked, and
thus wouldn't send any more traffic. Thus the server wouldn't have
any opportunity to notice the XPT_CLOSE bit has been set.
Enqueue the transport so that svcxprt notices the bit even if there
is no more transport activity after a flushed completion, QP access
error, or device removal event.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
---
net/sunrpc/xprtrdma/svc_rdma_transport.c | 11 ++++++++---
1 file changed, 8 insertions(+), 3 deletions(-)
Hi Bruce-
Please consider this patch for v4.15. Thanks!
diff --git a/net/sunrpc/xprtrdma/svc_rdma_transport.c b/net/sunrpc/xprtrdma/svc_rdma_transport.c
index 5caf8e7..46ec069 100644
--- a/net/sunrpc/xprtrdma/svc_rdma_transport.c
+++ b/net/sunrpc/xprtrdma/svc_rdma_transport.c
@@ -290,6 +290,7 @@ static void qp_event_handler(struct ib_event *event, void *context)
ib_event_msg(event->event), event->event,
event->element.qp);
set_bit(XPT_CLOSE, &xprt->xpt_flags);
+ svc_xprt_enqueue(xprt);
break;
}
}
@@ -322,8 +323,7 @@ static void svc_rdma_wc_receive(struct ib_cq *cq, struct ib_wc *wc)
set_bit(XPT_DATA, &xprt->sc_xprt.xpt_flags);
if (test_bit(RDMAXPRT_CONN_PENDING, &xprt->sc_flags))
goto out;
- svc_xprt_enqueue(&xprt->sc_xprt);
- goto out;
+ goto out_enqueue;
flushed:
if (wc->status != IB_WC_WR_FLUSH_ERR)
@@ -333,6 +333,8 @@ static void svc_rdma_wc_receive(struct ib_cq *cq, struct ib_wc *wc)
set_bit(XPT_CLOSE, &xprt->sc_xprt.xpt_flags);
svc_rdma_put_context(ctxt, 1);
+out_enqueue:
+ svc_xprt_enqueue(&xprt->sc_xprt);
out:
svc_xprt_put(&xprt->sc_xprt);
}
@@ -358,6 +360,7 @@ void svc_rdma_wc_send(struct ib_cq *cq, struct ib_wc *wc)
if (unlikely(wc->status != IB_WC_SUCCESS)) {
set_bit(XPT_CLOSE, &xprt->sc_xprt.xpt_flags);
+ svc_xprt_enqueue(&xprt->sc_xprt);
if (wc->status != IB_WC_WR_FLUSH_ERR)
pr_err("svcrdma: Send: %s (%u/0x%x)\n",
ib_wc_status_msg(wc->status),
@@ -569,8 +572,10 @@ static int rdma_listen_handler(struct rdma_cm_id *cma_id,
case RDMA_CM_EVENT_DEVICE_REMOVAL:
dprintk("svcrdma: Device removal xprt=%p, cm_id=%p\n",
xprt, cma_id);
- if (xprt)
+ if (xprt) {
set_bit(XPT_CLOSE, &xprt->sc_xprt.xpt_flags);
+ svc_xprt_enqueue(&xprt->sc_xprt);
+ }
break;
default:
^ permalink raw reply related [flat|nested] 5+ messages in thread* Re: [PATCH] svcrdma: Enqueue after setting XPT_CLOSE in completion handlers
2017-10-27 14:49 [PATCH] svcrdma: Enqueue after setting XPT_CLOSE in completion handlers Chuck Lever
@ 2017-10-28 7:43 ` Devesh Sharma
2017-11-03 21:19 ` Chuck Lever
0 siblings, 1 reply; 5+ messages in thread
From: Devesh Sharma @ 2017-10-28 7:43 UTC (permalink / raw)
To: Chuck Lever; +Cc: Bruce Fields, linux-rdma, Linux NFS Mailing List
looks good
Reveiwed-By: Devesh Sharma <devesh.sharma@broadcom.com>
On Fri, Oct 27, 2017 at 8:19 PM, Chuck Lever <chuck.lever@oracle.com> wrote:
> I noticed the server was sometimes not closing the connection after
> a flushed Send. For example, if the client responds with an RNR NAK
> to a Reply from the server, that client might be deadlocked, and
> thus wouldn't send any more traffic. Thus the server wouldn't have
> any opportunity to notice the XPT_CLOSE bit has been set.
>
> Enqueue the transport so that svcxprt notices the bit even if there
> is no more transport activity after a flushed completion, QP access
> error, or device removal event.
>
> Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
> ---
> net/sunrpc/xprtrdma/svc_rdma_transport.c | 11 ++++++++---
> 1 file changed, 8 insertions(+), 3 deletions(-)
>
> Hi Bruce-
>
> Please consider this patch for v4.15. Thanks!
>
>
> diff --git a/net/sunrpc/xprtrdma/svc_rdma_transport.c b/net/sunrpc/xprtrdma/svc_rdma_transport.c
> index 5caf8e7..46ec069 100644
> --- a/net/sunrpc/xprtrdma/svc_rdma_transport.c
> +++ b/net/sunrpc/xprtrdma/svc_rdma_transport.c
> @@ -290,6 +290,7 @@ static void qp_event_handler(struct ib_event *event, void *context)
> ib_event_msg(event->event), event->event,
> event->element.qp);
> set_bit(XPT_CLOSE, &xprt->xpt_flags);
> + svc_xprt_enqueue(xprt);
> break;
> }
> }
> @@ -322,8 +323,7 @@ static void svc_rdma_wc_receive(struct ib_cq *cq, struct ib_wc *wc)
> set_bit(XPT_DATA, &xprt->sc_xprt.xpt_flags);
> if (test_bit(RDMAXPRT_CONN_PENDING, &xprt->sc_flags))
> goto out;
> - svc_xprt_enqueue(&xprt->sc_xprt);
> - goto out;
> + goto out_enqueue;
>
> flushed:
> if (wc->status != IB_WC_WR_FLUSH_ERR)
> @@ -333,6 +333,8 @@ static void svc_rdma_wc_receive(struct ib_cq *cq, struct ib_wc *wc)
> set_bit(XPT_CLOSE, &xprt->sc_xprt.xpt_flags);
> svc_rdma_put_context(ctxt, 1);
>
> +out_enqueue:
> + svc_xprt_enqueue(&xprt->sc_xprt);
> out:
> svc_xprt_put(&xprt->sc_xprt);
> }
> @@ -358,6 +360,7 @@ void svc_rdma_wc_send(struct ib_cq *cq, struct ib_wc *wc)
>
> if (unlikely(wc->status != IB_WC_SUCCESS)) {
> set_bit(XPT_CLOSE, &xprt->sc_xprt.xpt_flags);
> + svc_xprt_enqueue(&xprt->sc_xprt);
> if (wc->status != IB_WC_WR_FLUSH_ERR)
> pr_err("svcrdma: Send: %s (%u/0x%x)\n",
> ib_wc_status_msg(wc->status),
> @@ -569,8 +572,10 @@ static int rdma_listen_handler(struct rdma_cm_id *cma_id,
> case RDMA_CM_EVENT_DEVICE_REMOVAL:
> dprintk("svcrdma: Device removal xprt=%p, cm_id=%p\n",
> xprt, cma_id);
> - if (xprt)
> + if (xprt) {
> set_bit(XPT_CLOSE, &xprt->sc_xprt.xpt_flags);
> + svc_xprt_enqueue(&xprt->sc_xprt);
> + }
> break;
>
> default:
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-rdma" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply [flat|nested] 5+ messages in thread* Re: [PATCH] svcrdma: Enqueue after setting XPT_CLOSE in completion handlers
2017-10-28 7:43 ` Devesh Sharma
@ 2017-11-03 21:19 ` Chuck Lever
2017-11-06 15:19 ` Bruce Fields
0 siblings, 1 reply; 5+ messages in thread
From: Chuck Lever @ 2017-11-03 21:19 UTC (permalink / raw)
To: Bruce Fields; +Cc: linux-rdma, Linux NFS Mailing List, Devesh Sharma
Hi Bruce-
> On Oct 28, 2017, at 3:43 AM, Devesh Sharma <devesh.sharma@broadcom.com> wrote:
>
> looks good
>
> Reveiwed-By: Devesh Sharma <devesh.sharma@broadcom.com>
>
> On Fri, Oct 27, 2017 at 8:19 PM, Chuck Lever <chuck.lever@oracle.com> wrote:
>> I noticed the server was sometimes not closing the connection after
>> a flushed Send. For example, if the client responds with an RNR NAK
>> to a Reply from the server, that client might be deadlocked, and
>> thus wouldn't send any more traffic. Thus the server wouldn't have
>> any opportunity to notice the XPT_CLOSE bit has been set.
>>
>> Enqueue the transport so that svcxprt notices the bit even if there
>> is no more transport activity after a flushed completion, QP access
>> error, or device removal event.
>>
>> Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
>> ---
>> net/sunrpc/xprtrdma/svc_rdma_transport.c | 11 ++++++++---
>> 1 file changed, 8 insertions(+), 3 deletions(-)
>>
>> Hi Bruce-
>>
>> Please consider this patch for v4.15. Thanks!
I notice nfsd-next does not have this patch. Is there anything
else I need to do? Should I resend with Devesh's Reviewed-by
tag?
>> diff --git a/net/sunrpc/xprtrdma/svc_rdma_transport.c b/net/sunrpc/xprtrdma/svc_rdma_transport.c
>> index 5caf8e7..46ec069 100644
>> --- a/net/sunrpc/xprtrdma/svc_rdma_transport.c
>> +++ b/net/sunrpc/xprtrdma/svc_rdma_transport.c
>> @@ -290,6 +290,7 @@ static void qp_event_handler(struct ib_event *event, void *context)
>> ib_event_msg(event->event), event->event,
>> event->element.qp);
>> set_bit(XPT_CLOSE, &xprt->xpt_flags);
>> + svc_xprt_enqueue(xprt);
>> break;
>> }
>> }
>> @@ -322,8 +323,7 @@ static void svc_rdma_wc_receive(struct ib_cq *cq, struct ib_wc *wc)
>> set_bit(XPT_DATA, &xprt->sc_xprt.xpt_flags);
>> if (test_bit(RDMAXPRT_CONN_PENDING, &xprt->sc_flags))
>> goto out;
>> - svc_xprt_enqueue(&xprt->sc_xprt);
>> - goto out;
>> + goto out_enqueue;
>>
>> flushed:
>> if (wc->status != IB_WC_WR_FLUSH_ERR)
>> @@ -333,6 +333,8 @@ static void svc_rdma_wc_receive(struct ib_cq *cq, struct ib_wc *wc)
>> set_bit(XPT_CLOSE, &xprt->sc_xprt.xpt_flags);
>> svc_rdma_put_context(ctxt, 1);
>>
>> +out_enqueue:
>> + svc_xprt_enqueue(&xprt->sc_xprt);
>> out:
>> svc_xprt_put(&xprt->sc_xprt);
>> }
>> @@ -358,6 +360,7 @@ void svc_rdma_wc_send(struct ib_cq *cq, struct ib_wc *wc)
>>
>> if (unlikely(wc->status != IB_WC_SUCCESS)) {
>> set_bit(XPT_CLOSE, &xprt->sc_xprt.xpt_flags);
>> + svc_xprt_enqueue(&xprt->sc_xprt);
>> if (wc->status != IB_WC_WR_FLUSH_ERR)
>> pr_err("svcrdma: Send: %s (%u/0x%x)\n",
>> ib_wc_status_msg(wc->status),
>> @@ -569,8 +572,10 @@ static int rdma_listen_handler(struct rdma_cm_id *cma_id,
>> case RDMA_CM_EVENT_DEVICE_REMOVAL:
>> dprintk("svcrdma: Device removal xprt=%p, cm_id=%p\n",
>> xprt, cma_id);
>> - if (xprt)
>> + if (xprt) {
>> set_bit(XPT_CLOSE, &xprt->sc_xprt.xpt_flags);
>> + svc_xprt_enqueue(&xprt->sc_xprt);
>> + }
>> break;
>>
>> default:
>>
>> --
>> To unsubscribe from this list: send the line "unsubscribe linux-rdma" in
>> the body of a message to majordomo@vger.kernel.org
>> More majordomo info at http://vger.kernel.org/majordomo-info.html
> --
> To unsubscribe from this list: send the line "unsubscribe linux-rdma" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
--
Chuck Lever
^ permalink raw reply [flat|nested] 5+ messages in thread* Re: [PATCH] svcrdma: Enqueue after setting XPT_CLOSE in completion handlers
2017-11-03 21:19 ` Chuck Lever
@ 2017-11-06 15:19 ` Bruce Fields
2017-11-06 15:36 ` Devesh Sharma
0 siblings, 1 reply; 5+ messages in thread
From: Bruce Fields @ 2017-11-06 15:19 UTC (permalink / raw)
To: Chuck Lever; +Cc: linux-rdma, Linux NFS Mailing List, Devesh Sharma
On Fri, Nov 03, 2017 at 05:19:30PM -0400, Chuck Lever wrote:
> Hi Bruce-
>
> > On Oct 28, 2017, at 3:43 AM, Devesh Sharma <devesh.sharma@broadcom.com> wrote:
> >
> > looks good
> >
> > Reveiwed-By: Devesh Sharma <devesh.sharma@broadcom.com>
> >
> > On Fri, Oct 27, 2017 at 8:19 PM, Chuck Lever <chuck.lever@oracle.com> wrote:
> >> I noticed the server was sometimes not closing the connection after
> >> a flushed Send. For example, if the client responds with an RNR NAK
> >> to a Reply from the server, that client might be deadlocked, and
> >> thus wouldn't send any more traffic. Thus the server wouldn't have
> >> any opportunity to notice the XPT_CLOSE bit has been set.
> >>
> >> Enqueue the transport so that svcxprt notices the bit even if there
> >> is no more transport activity after a flushed completion, QP access
> >> error, or device removal event.
> >>
> >> Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
> >> ---
> >> net/sunrpc/xprtrdma/svc_rdma_transport.c | 11 ++++++++---
> >> 1 file changed, 8 insertions(+), 3 deletions(-)
> >>
> >> Hi Bruce-
> >>
> >> Please consider this patch for v4.15. Thanks!
>
> I notice nfsd-next does not have this patch. Is there anything
> else I need to do? Should I resend with Devesh's Reviewed-by
> tag?
Thanks for the reminder; applied for 4.15 with Devesh's Reviewed-by.
--b.
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: [PATCH] svcrdma: Enqueue after setting XPT_CLOSE in completion handlers
2017-11-06 15:19 ` Bruce Fields
@ 2017-11-06 15:36 ` Devesh Sharma
0 siblings, 0 replies; 5+ messages in thread
From: Devesh Sharma @ 2017-11-06 15:36 UTC (permalink / raw)
To: Bruce Fields; +Cc: Chuck Lever, linux-rdma, Linux NFS Mailing List
Thanks Bruce
On Mon, Nov 6, 2017 at 8:49 PM, Bruce Fields <bfields@fieldses.org> wrote:
> On Fri, Nov 03, 2017 at 05:19:30PM -0400, Chuck Lever wrote:
>> Hi Bruce-
>>
>> > On Oct 28, 2017, at 3:43 AM, Devesh Sharma <devesh.sharma@broadcom.com> wrote:
>> >
>> > looks good
>> >
>> > Reveiwed-By: Devesh Sharma <devesh.sharma@broadcom.com>
>> >
>> > On Fri, Oct 27, 2017 at 8:19 PM, Chuck Lever <chuck.lever@oracle.com> wrote:
>> >> I noticed the server was sometimes not closing the connection after
>> >> a flushed Send. For example, if the client responds with an RNR NAK
>> >> to a Reply from the server, that client might be deadlocked, and
>> >> thus wouldn't send any more traffic. Thus the server wouldn't have
>> >> any opportunity to notice the XPT_CLOSE bit has been set.
>> >>
>> >> Enqueue the transport so that svcxprt notices the bit even if there
>> >> is no more transport activity after a flushed completion, QP access
>> >> error, or device removal event.
>> >>
>> >> Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
>> >> ---
>> >> net/sunrpc/xprtrdma/svc_rdma_transport.c | 11 ++++++++---
>> >> 1 file changed, 8 insertions(+), 3 deletions(-)
>> >>
>> >> Hi Bruce-
>> >>
>> >> Please consider this patch for v4.15. Thanks!
>>
>> I notice nfsd-next does not have this patch. Is there anything
>> else I need to do? Should I resend with Devesh's Reviewed-by
>> tag?
>
> Thanks for the reminder; applied for 4.15 with Devesh's Reviewed-by.
>
> --b.
> --
> To unsubscribe from this list: send the line "unsubscribe linux-rdma" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply [flat|nested] 5+ messages in thread
end of thread, other threads:[~2017-11-06 15:37 UTC | newest]
Thread overview: 5+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2017-10-27 14:49 [PATCH] svcrdma: Enqueue after setting XPT_CLOSE in completion handlers Chuck Lever
2017-10-28 7:43 ` Devesh Sharma
2017-11-03 21:19 ` Chuck Lever
2017-11-06 15:19 ` Bruce Fields
2017-11-06 15:36 ` Devesh Sharma
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).