From: Chuck Lever <chuck.lever@oracle.com>
To: bfields@fieldses.org
Cc: linux-rdma@vger.kernel.org, linux-nfs@vger.kernel.org
Subject: [PATCH v1 09/19] svcrdma: Preserve Receive buffer until svc_rdma_sendto
Date: Mon, 07 May 2018 15:27:37 -0400 [thread overview]
Message-ID: <20180507192737.4608.29315.stgit@klimt.1015granger.net> (raw)
In-Reply-To: <20180507192126.4608.63295.stgit@klimt.1015granger.net>
Rather than releasing the incoming svc_rdma_recv_ctxt at the end of
svc_rdma_recvfrom, hold onto it until svc_rdma_sendto.
This permits the contents of the Receive buffer to be preserved
through svc_process and then referenced directly in sendto as it
constructs Write and Reply chunks to return to the client.
The real changes will come in subsequent patches.
Note: I cannot use ->xpo_release_rqst for this purpose because that
is called _before_ ->xpo_sendto. svc_rdma_sendto uses information in
the received Call transport header to construct the Reply transport
header, which is preserved in the RPC's Receive buffer.
The historical comment in svc_send() isn't helpful: it is already
obvious that ->xpo_release_rqst is being called before ->xpo_sendto,
but there is no explanation for this ordering going back to the
beginning of the git era.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
---
net/sunrpc/xprtrdma/svc_rdma_recvfrom.c | 2 +-
net/sunrpc/xprtrdma/svc_rdma_sendto.c | 14 +++++++++++---
2 files changed, 12 insertions(+), 4 deletions(-)
diff --git a/net/sunrpc/xprtrdma/svc_rdma_recvfrom.c b/net/sunrpc/xprtrdma/svc_rdma_recvfrom.c
index ecfe7c9..d9fef52 100644
--- a/net/sunrpc/xprtrdma/svc_rdma_recvfrom.c
+++ b/net/sunrpc/xprtrdma/svc_rdma_recvfrom.c
@@ -789,7 +789,7 @@ int svc_rdma_recvfrom(struct svc_rqst *rqstp)
goto out_readchunk;
complete:
- svc_rdma_recv_ctxt_put(rdma_xprt, ctxt);
+ rqstp->rq_xprt_ctxt = ctxt;
rqstp->rq_prot = IPPROTO_MAX;
svc_xprt_copy_addrs(rqstp, xprt);
return rqstp->rq_arg.len;
diff --git a/net/sunrpc/xprtrdma/svc_rdma_sendto.c b/net/sunrpc/xprtrdma/svc_rdma_sendto.c
index a397d9a..cbbde70 100644
--- a/net/sunrpc/xprtrdma/svc_rdma_sendto.c
+++ b/net/sunrpc/xprtrdma/svc_rdma_sendto.c
@@ -623,6 +623,7 @@ int svc_rdma_sendto(struct svc_rqst *rqstp)
struct svc_xprt *xprt = rqstp->rq_xprt;
struct svcxprt_rdma *rdma =
container_of(xprt, struct svcxprt_rdma, sc_xprt);
+ struct svc_rdma_recv_ctxt *rctxt = rqstp->rq_xprt_ctxt;
__be32 *p, *rdma_argp, *rdma_resp, *wr_lst, *rp_ch;
struct xdr_buf *xdr = &rqstp->rq_res;
struct page *res_page;
@@ -675,7 +676,12 @@ int svc_rdma_sendto(struct svc_rqst *rqstp)
wr_lst, rp_ch);
if (ret < 0)
goto err0;
- return 0;
+ ret = 0;
+
+out:
+ rqstp->rq_xprt_ctxt = NULL;
+ svc_rdma_recv_ctxt_put(rdma, rctxt);
+ return ret;
err2:
if (ret != -E2BIG && ret != -EINVAL)
@@ -684,12 +690,14 @@ int svc_rdma_sendto(struct svc_rqst *rqstp)
ret = svc_rdma_send_error_msg(rdma, rdma_resp, rqstp);
if (ret < 0)
goto err0;
- return 0;
+ ret = 0;
+ goto out;
err1:
put_page(res_page);
err0:
trace_svcrdma_send_failed(rqstp, ret);
set_bit(XPT_CLOSE, &xprt->xpt_flags);
- return -ENOTCONN;
+ ret = -ENOTCONN;
+ goto out;
}
next prev parent reply other threads:[~2018-05-07 19:27 UTC|newest]
Thread overview: 29+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-05-07 19:26 [PATCH v1 00/19] NFS/RDMA server for-next Chuck Lever
2018-05-07 19:26 ` [PATCH v1 01/19] svcrdma: Add proper SPDX tags for NetApp-contributed source Chuck Lever
2018-05-09 20:23 ` J. Bruce Fields
2018-05-09 20:42 ` Chuck Lever
2018-05-15 14:52 ` Doug Ledford
2018-05-07 19:27 ` [PATCH v1 02/19] svcrdma: Use passed-in net namespace when creating RDMA listener Chuck Lever
2018-05-07 19:27 ` [PATCH v1 03/19] xprtrdma: Prepare RPC/RDMA includes for server-side trace points Chuck Lever
2018-05-07 19:27 ` [PATCH v1 04/19] svcrdma: Trace key RPC/RDMA protocol events Chuck Lever
2018-05-07 19:27 ` [PATCH v1 05/19] svcrdma: Trace key RDMA API events Chuck Lever
2018-05-07 19:27 ` [PATCH v1 06/19] svcrdma: Introduce svc_rdma_recv_ctxt Chuck Lever
2018-05-09 20:48 ` J. Bruce Fields
2018-05-09 21:02 ` Chuck Lever
2018-05-07 19:27 ` [PATCH v1 07/19] svcrdma: Remove sc_rq_depth Chuck Lever
2018-05-07 19:27 ` [PATCH v1 08/19] svcrdma: Simplify svc_rdma_recv_ctxt_put Chuck Lever
2018-05-07 19:27 ` Chuck Lever [this message]
2018-05-09 21:03 ` [PATCH v1 09/19] svcrdma: Preserve Receive buffer until svc_rdma_sendto J. Bruce Fields
2018-05-07 19:27 ` [PATCH v1 10/19] svcrdma: Persistently allocate and DMA-map Receive buffers Chuck Lever
2018-05-09 21:18 ` J. Bruce Fields
2018-05-09 21:31 ` Chuck Lever
2018-05-09 21:37 ` Bruce Fields
2018-05-07 19:27 ` [PATCH v1 11/19] svcrdma: Allocate recv_ctxt's on CPU handling Receives Chuck Lever
2018-05-07 19:27 ` [PATCH v1 12/19] svcrdma: Refactor svc_rdma_dma_map_buf Chuck Lever
2018-05-07 19:27 ` [PATCH v1 13/19] svcrdma: Clean up Send SGE accounting Chuck Lever
2018-05-07 19:28 ` [PATCH v1 14/19] svcrdma: Introduce svc_rdma_send_ctxt Chuck Lever
2018-05-07 19:28 ` [PATCH v1 15/19] svcrdma: Don't overrun the SGE array in svc_rdma_send_ctxt Chuck Lever
2018-05-07 19:28 ` [PATCH v1 16/19] svcrdma: Remove post_send_wr Chuck Lever
2018-05-07 19:28 ` [PATCH v1 17/19] svcrdma: Simplify svc_rdma_send() Chuck Lever
2018-05-07 19:28 ` [PATCH v1 18/19] svcrdma: Persistently allocate and DMA-map Send buffers Chuck Lever
2018-05-07 19:28 ` [PATCH v1 19/19] svcrdma: Remove unused svc_rdma_op_ctxt Chuck Lever
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180507192737.4608.29315.stgit@klimt.1015granger.net \
--to=chuck.lever@oracle.com \
--cc=bfields@fieldses.org \
--cc=linux-nfs@vger.kernel.org \
--cc=linux-rdma@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).