linux-nfs.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: "J. Bruce Fields" <bfields@fieldses.org>
To: Chuck Lever <chuck.lever@oracle.com>
Cc: linux-rdma@vger.kernel.org, linux-nfs@vger.kernel.org
Subject: Re: [PATCH v1 09/19] svcrdma: Preserve Receive buffer until svc_rdma_sendto
Date: Wed, 9 May 2018 17:03:09 -0400	[thread overview]
Message-ID: <20180509210309.GC31959@fieldses.org> (raw)
In-Reply-To: <20180507192737.4608.29315.stgit@klimt.1015granger.net>

On Mon, May 07, 2018 at 03:27:37PM -0400, Chuck Lever wrote:
> Rather than releasing the incoming svc_rdma_recv_ctxt at the end of
> svc_rdma_recvfrom, hold onto it until svc_rdma_sendto.
> 
> This permits the contents of the Receive buffer to be preserved
> through svc_process and then referenced directly in sendto as it
> constructs Write and Reply chunks to return to the client.
> 
> The real changes will come in subsequent patches.
> 
> Note: I cannot use ->xpo_release_rqst for this purpose because that
> is called _before_ ->xpo_sendto. svc_rdma_sendto uses information in
> the received Call transport header to construct the Reply transport
> header, which is preserved in the RPC's Receive buffer.
> 
> The historical comment in svc_send() isn't helpful: it is already
> obvious that ->xpo_release_rqst is being called before ->xpo_sendto,
> but there is no explanation for this ordering going back to the
> beginning of the git era.

Yeah.  I'm fine with deleting that comment at least.  (Or maybe moving
the call if it makes sense, I haven't thought about it.)

--b.

> 
> Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
> ---
>  net/sunrpc/xprtrdma/svc_rdma_recvfrom.c |    2 +-
>  net/sunrpc/xprtrdma/svc_rdma_sendto.c   |   14 +++++++++++---
>  2 files changed, 12 insertions(+), 4 deletions(-)
> 
> diff --git a/net/sunrpc/xprtrdma/svc_rdma_recvfrom.c b/net/sunrpc/xprtrdma/svc_rdma_recvfrom.c
> index ecfe7c9..d9fef52 100644
> --- a/net/sunrpc/xprtrdma/svc_rdma_recvfrom.c
> +++ b/net/sunrpc/xprtrdma/svc_rdma_recvfrom.c
> @@ -789,7 +789,7 @@ int svc_rdma_recvfrom(struct svc_rqst *rqstp)
>  		goto out_readchunk;
>  
>  complete:
> -	svc_rdma_recv_ctxt_put(rdma_xprt, ctxt);
> +	rqstp->rq_xprt_ctxt = ctxt;
>  	rqstp->rq_prot = IPPROTO_MAX;
>  	svc_xprt_copy_addrs(rqstp, xprt);
>  	return rqstp->rq_arg.len;
> diff --git a/net/sunrpc/xprtrdma/svc_rdma_sendto.c b/net/sunrpc/xprtrdma/svc_rdma_sendto.c
> index a397d9a..cbbde70 100644
> --- a/net/sunrpc/xprtrdma/svc_rdma_sendto.c
> +++ b/net/sunrpc/xprtrdma/svc_rdma_sendto.c
> @@ -623,6 +623,7 @@ int svc_rdma_sendto(struct svc_rqst *rqstp)
>  	struct svc_xprt *xprt = rqstp->rq_xprt;
>  	struct svcxprt_rdma *rdma =
>  		container_of(xprt, struct svcxprt_rdma, sc_xprt);
> +	struct svc_rdma_recv_ctxt *rctxt = rqstp->rq_xprt_ctxt;
>  	__be32 *p, *rdma_argp, *rdma_resp, *wr_lst, *rp_ch;
>  	struct xdr_buf *xdr = &rqstp->rq_res;
>  	struct page *res_page;
> @@ -675,7 +676,12 @@ int svc_rdma_sendto(struct svc_rqst *rqstp)
>  				      wr_lst, rp_ch);
>  	if (ret < 0)
>  		goto err0;
> -	return 0;
> +	ret = 0;
> +
> +out:
> +	rqstp->rq_xprt_ctxt = NULL;
> +	svc_rdma_recv_ctxt_put(rdma, rctxt);
> +	return ret;
>  
>   err2:
>  	if (ret != -E2BIG && ret != -EINVAL)
> @@ -684,12 +690,14 @@ int svc_rdma_sendto(struct svc_rqst *rqstp)
>  	ret = svc_rdma_send_error_msg(rdma, rdma_resp, rqstp);
>  	if (ret < 0)
>  		goto err0;
> -	return 0;
> +	ret = 0;
> +	goto out;
>  
>   err1:
>  	put_page(res_page);
>   err0:
>  	trace_svcrdma_send_failed(rqstp, ret);
>  	set_bit(XPT_CLOSE, &xprt->xpt_flags);
> -	return -ENOTCONN;
> +	ret = -ENOTCONN;
> +	goto out;
>  }

  reply	other threads:[~2018-05-09 21:03 UTC|newest]

Thread overview: 29+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-05-07 19:26 [PATCH v1 00/19] NFS/RDMA server for-next Chuck Lever
2018-05-07 19:26 ` [PATCH v1 01/19] svcrdma: Add proper SPDX tags for NetApp-contributed source Chuck Lever
2018-05-09 20:23   ` J. Bruce Fields
2018-05-09 20:42     ` Chuck Lever
2018-05-15 14:52       ` Doug Ledford
2018-05-07 19:27 ` [PATCH v1 02/19] svcrdma: Use passed-in net namespace when creating RDMA listener Chuck Lever
2018-05-07 19:27 ` [PATCH v1 03/19] xprtrdma: Prepare RPC/RDMA includes for server-side trace points Chuck Lever
2018-05-07 19:27 ` [PATCH v1 04/19] svcrdma: Trace key RPC/RDMA protocol events Chuck Lever
2018-05-07 19:27 ` [PATCH v1 05/19] svcrdma: Trace key RDMA API events Chuck Lever
2018-05-07 19:27 ` [PATCH v1 06/19] svcrdma: Introduce svc_rdma_recv_ctxt Chuck Lever
2018-05-09 20:48   ` J. Bruce Fields
2018-05-09 21:02     ` Chuck Lever
2018-05-07 19:27 ` [PATCH v1 07/19] svcrdma: Remove sc_rq_depth Chuck Lever
2018-05-07 19:27 ` [PATCH v1 08/19] svcrdma: Simplify svc_rdma_recv_ctxt_put Chuck Lever
2018-05-07 19:27 ` [PATCH v1 09/19] svcrdma: Preserve Receive buffer until svc_rdma_sendto Chuck Lever
2018-05-09 21:03   ` J. Bruce Fields [this message]
2018-05-07 19:27 ` [PATCH v1 10/19] svcrdma: Persistently allocate and DMA-map Receive buffers Chuck Lever
2018-05-09 21:18   ` J. Bruce Fields
2018-05-09 21:31     ` Chuck Lever
2018-05-09 21:37       ` Bruce Fields
2018-05-07 19:27 ` [PATCH v1 11/19] svcrdma: Allocate recv_ctxt's on CPU handling Receives Chuck Lever
2018-05-07 19:27 ` [PATCH v1 12/19] svcrdma: Refactor svc_rdma_dma_map_buf Chuck Lever
2018-05-07 19:27 ` [PATCH v1 13/19] svcrdma: Clean up Send SGE accounting Chuck Lever
2018-05-07 19:28 ` [PATCH v1 14/19] svcrdma: Introduce svc_rdma_send_ctxt Chuck Lever
2018-05-07 19:28 ` [PATCH v1 15/19] svcrdma: Don't overrun the SGE array in svc_rdma_send_ctxt Chuck Lever
2018-05-07 19:28 ` [PATCH v1 16/19] svcrdma: Remove post_send_wr Chuck Lever
2018-05-07 19:28 ` [PATCH v1 17/19] svcrdma: Simplify svc_rdma_send() Chuck Lever
2018-05-07 19:28 ` [PATCH v1 18/19] svcrdma: Persistently allocate and DMA-map Send buffers Chuck Lever
2018-05-07 19:28 ` [PATCH v1 19/19] svcrdma: Remove unused svc_rdma_op_ctxt Chuck Lever

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20180509210309.GC31959@fieldses.org \
    --to=bfields@fieldses.org \
    --cc=chuck.lever@oracle.com \
    --cc=linux-nfs@vger.kernel.org \
    --cc=linux-rdma@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).