public inbox for linux-nfs@vger.kernel.org
 help / color / mirror / Atom feed
From: Anna Schumaker <schumaker.anna@gmail.com>
To: bfields@fieldses.org
Cc: linux-nfs@vger.kernel.org
Subject: [PATCH 1/2] NFSD: nfsd4_encode_read{v}() should encode eof and maxcount
Date: Fri, 22 Feb 2019 16:58:49 -0500	[thread overview]
Message-ID: <20190222215850.20508-2-Anna.Schumaker@Netapp.com> (raw)
In-Reply-To: <20190222215850.20508-1-Anna.Schumaker@Netapp.com>

I intend to reuse nfsd4_encode_readv() for READ_PLUS, so I need an
alternate way to encode these values.  I think it makes sense for
nfsd4_encode_read() to handle this in a single place for both splice and
readv paths.

Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
---
 fs/nfsd/nfs4xdr.c | 67 ++++++++++++++++++-----------------------------
 1 file changed, 26 insertions(+), 41 deletions(-)

diff --git a/fs/nfsd/nfs4xdr.c b/fs/nfsd/nfs4xdr.c
index 3de42a729093..bb487e5c022c 100644
--- a/fs/nfsd/nfs4xdr.c
+++ b/fs/nfsd/nfs4xdr.c
@@ -3453,24 +3453,19 @@ nfsd4_encode_open_downgrade(struct nfsd4_compoundres *resp, __be32 nfserr, struc
 static __be32 nfsd4_encode_splice_read(
 				struct nfsd4_compoundres *resp,
 				struct nfsd4_read *read,
-				struct file *file, unsigned long maxcount)
+				struct file *file, unsigned long *maxcount)
 {
 	struct xdr_stream *xdr = &resp->xdr;
 	struct xdr_buf *buf = xdr->buf;
-	u32 eof;
-	long len;
 	int space_left;
 	__be32 nfserr;
-	__be32 *p = xdr->p - 2;
 
 	/* Make sure there will be room for padding if needed */
 	if (xdr->end - xdr->p < 1)
 		return nfserr_resource;
 
-	len = maxcount;
 	nfserr = nfsd_splice_read(read->rd_rqstp, read->rd_fhp,
-				  file, read->rd_offset, &maxcount);
-	read->rd_length = maxcount;
+				  file, read->rd_offset, maxcount);
 	if (nfserr) {
 		/*
 		 * nfsd_splice_actor may have already messed with the
@@ -3481,27 +3476,21 @@ static __be32 nfsd4_encode_splice_read(
 		return nfserr;
 	}
 
-	eof = nfsd_eof_on_read(len, maxcount, read->rd_offset,
-				d_inode(read->rd_fhp->fh_dentry)->i_size);
-
-	*(p++) = htonl(eof);
-	*(p++) = htonl(maxcount);
-
-	buf->page_len = maxcount;
-	buf->len += maxcount;
-	xdr->page_ptr += (buf->page_base + maxcount + PAGE_SIZE - 1)
+	buf->page_len = *maxcount;
+	buf->len += *maxcount;
+	xdr->page_ptr += (buf->page_base + *maxcount + PAGE_SIZE - 1)
 							/ PAGE_SIZE;
 
 	/* Use rest of head for padding and remaining ops: */
 	buf->tail[0].iov_base = xdr->p;
 	buf->tail[0].iov_len = 0;
 	xdr->iov = buf->tail;
-	if (maxcount&3) {
-		int pad = 4 - (maxcount&3);
+	if (*maxcount&3) {
+		int pad = 4 - (*maxcount&3);
 
 		*(xdr->p++) = 0;
 
-		buf->tail[0].iov_base += maxcount&3;
+		buf->tail[0].iov_base += *maxcount&3;
 		buf->tail[0].iov_len = pad;
 		buf->len += pad;
 	}
@@ -3516,21 +3505,19 @@ static __be32 nfsd4_encode_splice_read(
 
 static __be32 nfsd4_encode_readv(struct nfsd4_compoundres *resp,
 				 struct nfsd4_read *read,
-				 struct file *file, unsigned long maxcount)
+				 struct file *file, unsigned long *maxcount)
 {
 	struct xdr_stream *xdr = &resp->xdr;
-	u32 eof;
 	int v;
-	int starting_len = xdr->buf->len - 8;
+	int starting_len = xdr->buf->len;
 	long len;
 	int thislen;
 	__be32 nfserr;
-	__be32 tmp;
 	__be32 *p;
 	u32 zzz = 0;
 	int pad;
 
-	len = maxcount;
+	len = *maxcount;
 	v = 0;
 
 	thislen = min_t(long, len, ((void *)xdr->end - (void *)xdr->p));
@@ -3552,25 +3539,14 @@ static __be32 nfsd4_encode_readv(struct nfsd4_compoundres *resp,
 	}
 	read->rd_vlen = v;
 
-	len = maxcount;
 	nfserr = nfsd_readv(resp->rqstp, read->rd_fhp, file, read->rd_offset,
-			    resp->rqstp->rq_vec, read->rd_vlen, &maxcount);
-	read->rd_length = maxcount;
+			    resp->rqstp->rq_vec, read->rd_vlen, maxcount);
 	if (nfserr)
 		return nfserr;
-	xdr_truncate_encode(xdr, starting_len + 8 + ((maxcount+3)&~3));
-
-	eof = nfsd_eof_on_read(len, maxcount, read->rd_offset,
-				d_inode(read->rd_fhp->fh_dentry)->i_size);
+	xdr_truncate_encode(xdr, starting_len + ((*maxcount+3)&~3));
 
-	tmp = htonl(eof);
-	write_bytes_to_xdr_buf(xdr->buf, starting_len    , &tmp, 4);
-	tmp = htonl(maxcount);
-	write_bytes_to_xdr_buf(xdr->buf, starting_len + 4, &tmp, 4);
-
-	pad = (maxcount&3) ? 4 - (maxcount&3) : 0;
-	write_bytes_to_xdr_buf(xdr->buf, starting_len + 8 + maxcount,
-								&zzz, pad);
+	pad = (*maxcount&3) ? 4 - (*maxcount&3) : 0;
+	write_bytes_to_xdr_buf(xdr->buf, starting_len + *maxcount, &zzz, pad);
 	return 0;
 
 }
@@ -3585,6 +3561,8 @@ nfsd4_encode_read(struct nfsd4_compoundres *resp, __be32 nfserr,
 	int starting_len = xdr->buf->len;
 	struct raparms *ra = NULL;
 	__be32 *p;
+	long len;
+	u32 eof;
 
 	p = xdr_reserve_space(xdr, 8); /* eof flag and byte count */
 	if (!p) {
@@ -3602,15 +3580,22 @@ nfsd4_encode_read(struct nfsd4_compoundres *resp, __be32 nfserr,
 	maxcount = min_t(unsigned long, maxcount,
 			 (xdr->buf->buflen - xdr->buf->len));
 	maxcount = min_t(unsigned long, maxcount, read->rd_length);
+	len = maxcount;
 
 	if (read->rd_tmp_file)
 		ra = nfsd_init_raparms(file);
 
 	if (file->f_op->splice_read &&
 	    test_bit(RQ_SPLICE_OK, &resp->rqstp->rq_flags))
-		nfserr = nfsd4_encode_splice_read(resp, read, file, maxcount);
+		nfserr = nfsd4_encode_splice_read(resp, read, file, &maxcount);
 	else
-		nfserr = nfsd4_encode_readv(resp, read, file, maxcount);
+		nfserr = nfsd4_encode_readv(resp, read, file, &maxcount);
+
+	read->rd_length = maxcount;
+	eof = nfsd_eof_on_read(len, maxcount, read->rd_offset,
+			       d_inode(read->rd_fhp->fh_dentry)->i_size);
+	*p++ = cpu_to_be32(eof);
+	*p++ = cpu_to_be32(maxcount);
 
 	if (ra)
 		nfsd_put_raparams(file, ra);
-- 
2.20.1


  reply	other threads:[~2019-02-22 21:58 UTC|newest]

Thread overview: 4+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-02-22 21:58 [PATCH 0/2] NFSD: Add support for the v4.2 READ_PLUS operation Anna Schumaker
2019-02-22 21:58 ` Anna Schumaker [this message]
2019-02-22 21:58 ` [PATCH 2/2] NFSD: Add basic READ_PLUS support Anna Schumaker
2019-03-01 17:03 ` [PATCH 0/2] NFSD: Add support for the v4.2 READ_PLUS operation J. Bruce Fields

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20190222215850.20508-2-Anna.Schumaker@Netapp.com \
    --to=schumaker.anna@gmail.com \
    --cc=bfields@fieldses.org \
    --cc=linux-nfs@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox