From: Anna Schumaker <anna@kernel.org>
To: linux-nfs@vger.kernel.org, chuck.lever@oracle.com
Cc: anna@kernel.org
Subject: [PATCH v2 1/1] NFSD: Simplify READ_PLUS
Date: Wed, 7 Sep 2022 15:52:59 -0400 [thread overview]
Message-ID: <20220907195259.926736-2-anna@kernel.org> (raw)
In-Reply-To: <20220907195259.926736-1-anna@kernel.org>
From: Anna Schumaker <Anna.Schumaker@Netapp.com>
Chuck had suggested reverting READ_PLUS so it returns a single DATA
segment covering the requested read range. This prepares the server for
a future "sparse read" function so support can easily be added without
needing to rip out the old READ_PLUS code at the same time.
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
---
fs/nfsd/nfs4xdr.c | 139 +++++++++++-----------------------------------
1 file changed, 32 insertions(+), 107 deletions(-)
diff --git a/fs/nfsd/nfs4xdr.c b/fs/nfsd/nfs4xdr.c
index 1e9690a061ec..bcc8c385faf2 100644
--- a/fs/nfsd/nfs4xdr.c
+++ b/fs/nfsd/nfs4xdr.c
@@ -4731,79 +4731,37 @@ nfsd4_encode_offload_status(struct nfsd4_compoundres *resp, __be32 nfserr,
static __be32
nfsd4_encode_read_plus_data(struct nfsd4_compoundres *resp,
- struct nfsd4_read *read,
- unsigned long *maxcount, u32 *eof,
- loff_t *pos)
+ struct nfsd4_read *read)
{
- struct xdr_stream *xdr = resp->xdr;
+ bool splice_ok = test_bit(RQ_SPLICE_OK, &resp->rqstp->rq_flags);
struct file *file = read->rd_nf->nf_file;
- int starting_len = xdr->buf->len;
- loff_t hole_pos;
- __be32 nfserr;
- __be32 *p, tmp;
- __be64 tmp64;
-
- hole_pos = pos ? *pos : vfs_llseek(file, read->rd_offset, SEEK_HOLE);
- if (hole_pos > read->rd_offset)
- *maxcount = min_t(unsigned long, *maxcount, hole_pos - read->rd_offset);
- *maxcount = min_t(unsigned long, *maxcount, (xdr->buf->buflen - xdr->buf->len));
+ struct xdr_stream *xdr = resp->xdr;
+ unsigned long maxcount;
+ __be32 nfserr, *p;
/* Content type, offset, byte count */
p = xdr_reserve_space(xdr, 4 + 8 + 4);
if (!p)
- return nfserr_resource;
+ return nfserr_io;
+ if (resp->xdr->buf->page_len && splice_ok) {
+ WARN_ON_ONCE(splice_ok);
+ return nfserr_io;
+ }
- read->rd_vlen = xdr_reserve_space_vec(xdr, resp->rqstp->rq_vec, *maxcount);
- if (read->rd_vlen < 0)
- return nfserr_resource;
+ maxcount = min_t(unsigned long, read->rd_length,
+ (xdr->buf->buflen - xdr->buf->len));
- nfserr = nfsd_readv(resp->rqstp, read->rd_fhp, file, read->rd_offset,
- resp->rqstp->rq_vec, read->rd_vlen, maxcount, eof);
+ if (file->f_op->splice_read && splice_ok)
+ nfserr = nfsd4_encode_splice_read(resp, read, file, maxcount);
+ else
+ nfserr = nfsd4_encode_readv(resp, read, file, maxcount);
if (nfserr)
return nfserr;
- xdr_truncate_encode(xdr, starting_len + 16 + xdr_align_size(*maxcount));
- tmp = htonl(NFS4_CONTENT_DATA);
- write_bytes_to_xdr_buf(xdr->buf, starting_len, &tmp, 4);
- tmp64 = cpu_to_be64(read->rd_offset);
- write_bytes_to_xdr_buf(xdr->buf, starting_len + 4, &tmp64, 8);
- tmp = htonl(*maxcount);
- write_bytes_to_xdr_buf(xdr->buf, starting_len + 12, &tmp, 4);
-
- tmp = xdr_zero;
- write_bytes_to_xdr_buf(xdr->buf, starting_len + 16 + *maxcount, &tmp,
- xdr_pad_size(*maxcount));
- return nfs_ok;
-}
-
-static __be32
-nfsd4_encode_read_plus_hole(struct nfsd4_compoundres *resp,
- struct nfsd4_read *read,
- unsigned long *maxcount, u32 *eof)
-{
- struct file *file = read->rd_nf->nf_file;
- loff_t data_pos = vfs_llseek(file, read->rd_offset, SEEK_DATA);
- loff_t f_size = i_size_read(file_inode(file));
- unsigned long count;
- __be32 *p;
-
- if (data_pos == -ENXIO)
- data_pos = f_size;
- else if (data_pos <= read->rd_offset || (data_pos < f_size && data_pos % PAGE_SIZE))
- return nfsd4_encode_read_plus_data(resp, read, maxcount, eof, &f_size);
- count = data_pos - read->rd_offset;
-
- /* Content type, offset, byte count */
- p = xdr_reserve_space(resp->xdr, 4 + 8 + 8);
- if (!p)
- return nfserr_resource;
-
- *p++ = htonl(NFS4_CONTENT_HOLE);
+ *p++ = cpu_to_be32(NFS4_CONTENT_DATA);
p = xdr_encode_hyper(p, read->rd_offset);
- p = xdr_encode_hyper(p, count);
+ *p = cpu_to_be32(read->rd_length);
- *eof = (read->rd_offset + count) >= f_size;
- *maxcount = min_t(unsigned long, count, *maxcount);
return nfs_ok;
}
@@ -4811,69 +4769,36 @@ static __be32
nfsd4_encode_read_plus(struct nfsd4_compoundres *resp, __be32 nfserr,
struct nfsd4_read *read)
{
- unsigned long maxcount, count;
+ struct file *file = read->rd_nf->nf_file;
struct xdr_stream *xdr = resp->xdr;
- struct file *file;
int starting_len = xdr->buf->len;
- int last_segment = xdr->buf->len;
- int segments = 0;
- __be32 *p, tmp;
- bool is_data;
- loff_t pos;
- u32 eof;
+ u32 segments = 0;
+ __be32 *p;
if (nfserr)
return nfserr;
- file = read->rd_nf->nf_file;
/* eof flag, segment count */
p = xdr_reserve_space(xdr, 4 + 4);
if (!p)
- return nfserr_resource;
+ return nfserr_io;
xdr_commit_encode(xdr);
- maxcount = min_t(unsigned long, read->rd_length,
- (xdr->buf->buflen - xdr->buf->len));
- count = maxcount;
-
- eof = read->rd_offset >= i_size_read(file_inode(file));
- if (eof)
+ read->rd_eof = read->rd_offset >= i_size_read(file_inode(file));
+ if (read->rd_eof)
goto out;
- pos = vfs_llseek(file, read->rd_offset, SEEK_HOLE);
- is_data = pos > read->rd_offset;
-
- while (count > 0 && !eof) {
- maxcount = count;
- if (is_data)
- nfserr = nfsd4_encode_read_plus_data(resp, read, &maxcount, &eof,
- segments == 0 ? &pos : NULL);
- else
- nfserr = nfsd4_encode_read_plus_hole(resp, read, &maxcount, &eof);
- if (nfserr)
- goto out;
- count -= maxcount;
- read->rd_offset += maxcount;
- is_data = !is_data;
- last_segment = xdr->buf->len;
- segments++;
- }
-
-out:
- if (nfserr && segments == 0)
+ nfserr = nfsd4_encode_read_plus_data(resp, read);
+ if (nfserr) {
xdr_truncate_encode(xdr, starting_len);
- else {
- if (nfserr) {
- xdr_truncate_encode(xdr, last_segment);
- nfserr = nfs_ok;
- eof = 0;
- }
- tmp = htonl(eof);
- write_bytes_to_xdr_buf(xdr->buf, starting_len, &tmp, 4);
- tmp = htonl(segments);
- write_bytes_to_xdr_buf(xdr->buf, starting_len + 4, &tmp, 4);
+ return nfserr;
}
+ segments++;
+
+out:
+ p = xdr_encode_bool(p, read->rd_eof);
+ *p = cpu_to_be32(segments);
return nfserr;
}
--
2.37.2
next prev parent reply other threads:[~2022-09-07 19:53 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-09-07 19:52 [PATCH v2 0/1] NFSD: Simplify READ_PLUS Anna Schumaker
2022-09-07 19:52 ` Anna Schumaker [this message]
2022-09-07 20:29 ` [PATCH v2 1/1] " Chuck Lever III
2022-09-07 20:37 ` Anna Schumaker
2022-09-07 20:51 ` Chuck Lever III
2022-09-07 22:33 ` Trond Myklebust
2022-09-08 15:36 ` Chuck Lever III
2022-09-08 16:25 ` Trond Myklebust
2022-09-08 16:39 ` Chuck Lever III
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220907195259.926736-2-anna@kernel.org \
--to=anna@kernel.org \
--cc=chuck.lever@oracle.com \
--cc=linux-nfs@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox