From: Randy Dunlap <rdunlap@infradead.org>
To: linux-kernel@vger.kernel.org
Cc: Randy Dunlap <rdunlap@infradead.org>,
Jonathan Corbet <corbet@lwn.net>,
linux-doc@vger.kernel.org,
Trond Myklebust <trond.myklebust@hammerspace.com>,
Anna Schumaker <anna@kernel.org>,
Chuck Lever <chuck.lever@oracle.com>,
Jeff Layton <jlayton@kernel.org>,
linux-nfs@vger.kernel.org
Subject: [PATCH] Documentation: kernel-parameters: sort NFS parameters
Date: Sun, 26 Feb 2023 18:58:16 -0800 [thread overview]
Message-ID: <20230227025816.1083-1-rdunlap@infradead.org> (raw)
Sort the NFS kernel command line parameters. This is done in 4 groups
so as to not have them intermingled: 'nfs' module parameters, 'nfs4'
module parameters, 'nfsd' module parameters, and nfs "global" (__setup,
no module) parameters.
There were 5 parameters which were listed with a space between the
parameter name and the following '=' sign. The space has been
removed since module parameters expect 'parameter=' with no intervening
space.
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: linux-doc@vger.kernel.org
Cc: Trond Myklebust <trond.myklebust@hammerspace.com>
Cc: Anna Schumaker <anna@kernel.org>
Cc: Chuck Lever <chuck.lever@oracle.com>
Cc: Jeff Layton <jlayton@kernel.org>
Cc: linux-nfs@vger.kernel.org
---
Documentation/admin-guide/kernel-parameters.txt | 74 +++++++-------
1 file changed, 37 insertions(+), 37 deletions(-)
diff -- a/Documentation/admin-guide/kernel-parameters.txt b/Documentation/admin-guide/kernel-parameters.txt
--- a/Documentation/admin-guide/kernel-parameters.txt
+++ b/Documentation/admin-guide/kernel-parameters.txt
@@ -3428,14 +3428,13 @@
1 to enable accounting
Default value is 0.
- nfsaddrs= [NFS] Deprecated. Use ip= instead.
- See Documentation/admin-guide/nfs/nfsroot.rst.
-
- nfsroot= [NFS] nfs root filesystem for disk-less boxes.
- See Documentation/admin-guide/nfs/nfsroot.rst.
+ nfs.cache_getent=
+ [NFS] sets the pathname to the program which is used
+ to update the NFS client cache entries.
- nfsrootdebug [NFS] enable nfsroot debugging messages.
- See Documentation/admin-guide/nfs/nfsroot.rst.
+ nfs.cache_getent_timeout=
+ [NFS] sets the timeout after which an attempt to
+ update a cache entry is deemed to have failed.
nfs.callback_nr_threads=
[NFSv4] set the total number of threads that the
@@ -3446,18 +3445,6 @@
[NFS] set the TCP port on which the NFSv4 callback
channel should listen.
- nfs.cache_getent=
- [NFS] sets the pathname to the program which is used
- to update the NFS client cache entries.
-
- nfs.cache_getent_timeout=
- [NFS] sets the timeout after which an attempt to
- update a cache entry is deemed to have failed.
-
- nfs.idmap_cache_timeout=
- [NFS] set the maximum lifetime for idmapper cache
- entries.
-
nfs.enable_ino64=
[NFS] enable 64-bit inode numbers.
If zero, the NFS client will fake up a 32-bit inode
@@ -3465,6 +3452,10 @@
of returning the full 64-bit number.
The default is to return 64-bit inode numbers.
+ nfs.idmap_cache_timeout=
+ [NFS] set the maximum lifetime for idmapper cache
+ entries.
+
nfs.max_session_cb_slots=
[NFSv4.1] Sets the maximum number of session
slots the client will assign to the callback
@@ -3492,21 +3483,14 @@
will be autodetected by the client, and it will fall
back to using the idmapper.
To turn off this behaviour, set the value to '0'.
+
nfs.nfs4_unique_id=
[NFS4] Specify an additional fixed unique ident-
ification string that NFSv4 clients can insert into
their nfs_client_id4 string. This is typically a
UUID that is generated at system install time.
- nfs.send_implementation_id =
- [NFSv4.1] Send client implementation identification
- information in exchange_id requests.
- If zero, no implementation identification information
- will be sent.
- The default is to send the implementation identification
- information.
-
- nfs.recover_lost_locks =
+ nfs.recover_lost_locks=
[NFSv4] Attempt to recover locks that were lost due
to a lease timeout on the server. Please note that
doing this risks data corruption, since there are
@@ -3518,7 +3502,15 @@
The default parameter value of '0' causes the kernel
not to attempt recovery of lost locks.
- nfs4.layoutstats_timer =
+ nfs.send_implementation_id=
+ [NFSv4.1] Send client implementation identification
+ information in exchange_id requests.
+ If zero, no implementation identification information
+ will be sent.
+ The default is to send the implementation identification
+ information.
+
+ nfs4.layoutstats_timer=
[NFSv4.2] Change the rate at which the kernel sends
layoutstats to the pNFS metadata server.
@@ -3527,12 +3519,19 @@
driver. A non-zero value sets the minimum interval
in seconds between layoutstats transmissions.
- nfsd.inter_copy_offload_enable =
+ nfsd.inter_copy_offload_enable=
[NFSv4.2] When set to 1, the server will support
server-to-server copies for which this server is
the destination of the copy.
- nfsd.nfsd4_ssc_umount_timeout =
+ nfsd.nfs4_disable_idmapping=
+ [NFSv4] When set to the default of '1', the NFSv4
+ server will return only numeric uids and gids to
+ clients using auth_sys, and will accept numeric uids
+ and gids from such clients. This is intended to ease
+ migration from NFSv2/v3.
+
+ nfsd.nfsd4_ssc_umount_timeout=
[NFSv4.2] When used as the destination of a
server-to-server copy, knfsd temporarily mounts
the source server. It caches the mount in case
@@ -3540,13 +3539,14 @@
used for the number of milliseconds specified by
this parameter.
- nfsd.nfs4_disable_idmapping=
- [NFSv4] When set to the default of '1', the NFSv4
- server will return only numeric uids and gids to
- clients using auth_sys, and will accept numeric uids
- and gids from such clients. This is intended to ease
- migration from NFSv2/v3.
+ nfsaddrs= [NFS] Deprecated. Use ip= instead.
+ See Documentation/admin-guide/nfs/nfsroot.rst.
+
+ nfsroot= [NFS] nfs root filesystem for disk-less boxes.
+ See Documentation/admin-guide/nfs/nfsroot.rst.
+ nfsrootdebug [NFS] enable nfsroot debugging messages.
+ See Documentation/admin-guide/nfs/nfsroot.rst.
nmi_backtrace.backtrace_idle [KNL]
Dump stacks even of idle CPUs in response to an
next reply other threads:[~2023-02-27 2:58 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-02-27 2:58 Randy Dunlap [this message]
2023-03-14 18:46 ` [PATCH] Documentation: kernel-parameters: sort NFS parameters Jonathan Corbet
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230227025816.1083-1-rdunlap@infradead.org \
--to=rdunlap@infradead.org \
--cc=anna@kernel.org \
--cc=chuck.lever@oracle.com \
--cc=corbet@lwn.net \
--cc=jlayton@kernel.org \
--cc=linux-doc@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-nfs@vger.kernel.org \
--cc=trond.myklebust@hammerspace.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox