From: NeilBrown <neilb@suse.de>
To: Chuck Lever <chuck.lever@oracle.com>, Jeff Layton <jlayton@kernel.org>
Cc: linux-nfs@vger.kernel.org, Olga Kornievskaia <kolga@netapp.com>,
Dai Ngo <Dai.Ngo@oracle.com>, Tom Talpey <tom@talpey.com>
Subject: [PATCH 1/5] nfsd: call nfsd_last_thread() before final nfsd_put()
Date: Fri, 15 Dec 2023 11:56:31 +1100 [thread overview]
Message-ID: <20231215010030.7580-2-neilb@suse.de> (raw)
In-Reply-To: <20231215010030.7580-1-neilb@suse.de>
If write_ports_addfd or write_ports_addxprt fail, they call nfsd_put()
without calling nfsd_last_thread(). This leaves nn->nfsd_serv pointing
to a structure that has been freed.
So remove 'static' from nfsd_last_thread() and call it when the
nfsd_serv is about to be destroyed.
Signed-off-by: NeilBrown <neilb@suse.de>
---
fs/nfsd/nfsctl.c | 9 +++++++--
fs/nfsd/nfsd.h | 1 +
fs/nfsd/nfssvc.c | 2 +-
3 files changed, 9 insertions(+), 3 deletions(-)
diff --git a/fs/nfsd/nfsctl.c b/fs/nfsd/nfsctl.c
index d6eeee149370..8c84e77a8892 100644
--- a/fs/nfsd/nfsctl.c
+++ b/fs/nfsd/nfsctl.c
@@ -709,8 +709,10 @@ static ssize_t __write_ports_addfd(char *buf, struct net *net, const struct cred
err = svc_addsock(nn->nfsd_serv, net, fd, buf, SIMPLE_TRANSACTION_LIMIT, cred);
- if (err >= 0 &&
- !nn->nfsd_serv->sv_nrthreads && !xchg(&nn->keep_active, 1))
+ if (err < 0 && !nn->nfsd_serv->sv_nrthreads && !nn->keep_active)
+ nfsd_last_thread(net);
+ else if (err >= 0 &&
+ !nn->nfsd_serv->sv_nrthreads && !xchg(&nn->keep_active, 1))
svc_get(nn->nfsd_serv);
nfsd_put(net);
@@ -761,6 +763,9 @@ static ssize_t __write_ports_addxprt(char *buf, struct net *net, const struct cr
svc_xprt_put(xprt);
}
out_err:
+ if (!nn->nfsd_serv->sv_nrthreads && !nn->keep_active)
+ nfsd_last_thread(net);
+
nfsd_put(net);
return err;
}
diff --git a/fs/nfsd/nfsd.h b/fs/nfsd/nfsd.h
index f5ff42f41ee7..3286ffacbc56 100644
--- a/fs/nfsd/nfsd.h
+++ b/fs/nfsd/nfsd.h
@@ -155,6 +155,7 @@ int nfsd_vers(struct nfsd_net *nn, int vers, enum vers_op change);
int nfsd_minorversion(struct nfsd_net *nn, u32 minorversion, enum vers_op change);
void nfsd_reset_versions(struct nfsd_net *nn);
int nfsd_create_serv(struct net *net);
+void nfsd_last_thread(struct net *net);
extern int nfsd_max_blksize;
diff --git a/fs/nfsd/nfssvc.c b/fs/nfsd/nfssvc.c
index 66ca50b38b27..32d06249b3c0 100644
--- a/fs/nfsd/nfssvc.c
+++ b/fs/nfsd/nfssvc.c
@@ -541,7 +541,7 @@ static struct notifier_block nfsd_inet6addr_notifier = {
/* Only used under nfsd_mutex, so this atomic may be overkill: */
static atomic_t nfsd_notifier_refcount = ATOMIC_INIT(0);
-static void nfsd_last_thread(struct net *net)
+void nfsd_last_thread(struct net *net)
{
struct nfsd_net *nn = net_generic(net, nfsd_net_id);
struct svc_serv *serv = nn->nfsd_serv;
--
2.43.0
next prev parent reply other threads:[~2023-12-15 1:00 UTC|newest]
Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-12-15 0:56 [PATCH 0/5 v2] sunrpc: stop refcounting svc_serv NeilBrown
2023-12-15 0:56 ` NeilBrown [this message]
2023-12-15 0:56 ` [PATCH 2/5] svc: don't hold reference for poolstats, only mutex NeilBrown
2023-12-15 0:56 ` [PATCH 3/5] nfsd: hold nfsd_mutex across entire netlink operation NeilBrown
2023-12-15 0:56 ` [PATCH 4/5] SUNRPC: discard sv_refcnt, and svc_get/svc_put NeilBrown
2023-12-15 0:56 ` [PATCH 5/5] nfsd: rename nfsd_last_thread() to nfsd_destroy_serv() NeilBrown
2023-12-15 10:59 ` [PATCH 0/5 v2] sunrpc: stop refcounting svc_serv Jeff Layton
2023-12-15 14:19 ` Chuck Lever III
2023-12-15 14:26 ` Jeff Layton
2023-12-15 14:38 ` Chuck Lever III
2023-12-15 15:37 ` Chuck Lever III
2023-12-15 15:44 ` Jeff Layton
-- strict thread matches above, loose matches on Subject: below --
2023-10-30 1:08 [PATCH 0/5] sunrpc: not " NeilBrown
2023-10-30 1:08 ` [PATCH 1/5] nfsd: call nfsd_last_thread() before final nfsd_put() NeilBrown
2023-10-30 13:15 ` Jeff Layton
2023-10-30 15:52 ` Chuck Lever
2023-10-30 16:41 ` Jeff Layton
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20231215010030.7580-2-neilb@suse.de \
--to=neilb@suse.de \
--cc=Dai.Ngo@oracle.com \
--cc=chuck.lever@oracle.com \
--cc=jlayton@kernel.org \
--cc=kolga@netapp.com \
--cc=linux-nfs@vger.kernel.org \
--cc=tom@talpey.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox