public inbox for linux-nfs@vger.kernel.org
 help / color / mirror / Atom feed
From: NeilBrown <neilb@suse.de>
To: Chuck Lever <chuck.lever@oracle.com>, Jeff Layton <jlayton@kernel.org>
Cc: linux-nfs@vger.kernel.org, Olga Kornievskaia <kolga@netapp.com>,
	Dai Ngo <Dai.Ngo@oracle.com>, Tom Talpey <tom@talpey.com>,
	Steve Dickson <steved@redhat.com>
Subject: [PATCH 01/14] lockd: discard nlmsvc_timeout
Date: Mon, 15 Jul 2024 17:14:14 +1000	[thread overview]
Message-ID: <20240715074657.18174-2-neilb@suse.de> (raw)
In-Reply-To: <20240715074657.18174-1-neilb@suse.de>

nlmsvc_timeout always has the same value as (nlm_timeout * HZ), so use
that in the one place that nlmsvc_timeout is used.

In truth it *might* not always be the same as nlmsvc_timeout is only set
when lockd is started while nlm_timeout can be set at anytime via
sysctl.  I think this difference it not helpful so removing it is good.

Also remove the test for nlm_timout being 0.  This is not possible -
unless a module parameter is used to set the minimum timeout to 0, and
if that happens then it probably should be honoured.

Signed-off-by: NeilBrown <neilb@suse.de>
---
 fs/lockd/host.c             | 2 +-
 fs/lockd/svc.c              | 7 +------
 include/linux/lockd/lockd.h | 2 +-
 3 files changed, 3 insertions(+), 8 deletions(-)

diff --git a/fs/lockd/host.c b/fs/lockd/host.c
index c11516801784..5e6877c37f73 100644
--- a/fs/lockd/host.c
+++ b/fs/lockd/host.c
@@ -440,7 +440,7 @@ nlm_bind_host(struct nlm_host *host)
 	if ((clnt = host->h_rpcclnt) != NULL) {
 		nlm_rebind_host(host);
 	} else {
-		unsigned long increment = nlmsvc_timeout;
+		unsigned long increment = nlm_timeout * HZ;
 		struct rpc_timeout timeparms = {
 			.to_initval	= increment,
 			.to_increment	= increment,
diff --git a/fs/lockd/svc.c b/fs/lockd/svc.c
index ab8042a5b895..71713309967d 100644
--- a/fs/lockd/svc.c
+++ b/fs/lockd/svc.c
@@ -53,7 +53,6 @@ EXPORT_SYMBOL_GPL(nlmsvc_ops);
 static DEFINE_MUTEX(nlmsvc_mutex);
 static unsigned int		nlmsvc_users;
 static struct svc_serv		*nlmsvc_serv;
-unsigned long			nlmsvc_timeout;
 
 static void nlmsvc_request_retry(struct timer_list *tl)
 {
@@ -68,7 +67,7 @@ unsigned int lockd_net_id;
  * and also changed through the sysctl interface.  -- Jamie Lokier, Aug 2003
  */
 static unsigned long		nlm_grace_period;
-static unsigned long		nlm_timeout = LOCKD_DFLT_TIMEO;
+unsigned long			nlm_timeout = LOCKD_DFLT_TIMEO;
 static int			nlm_udpport, nlm_tcpport;
 
 /* RLIM_NOFILE defaults to 1024. That seems like a reasonable default here. */
@@ -333,10 +332,6 @@ static int lockd_get(void)
 		printk(KERN_WARNING
 			"lockd_up: no pid, %d users??\n", nlmsvc_users);
 
-	if (!nlm_timeout)
-		nlm_timeout = LOCKD_DFLT_TIMEO;
-	nlmsvc_timeout = nlm_timeout * HZ;
-
 	serv = svc_create(&nlmsvc_program, LOCKD_BUFSIZE, lockd);
 	if (!serv) {
 		printk(KERN_WARNING "lockd_up: create service failed\n");
diff --git a/include/linux/lockd/lockd.h b/include/linux/lockd/lockd.h
index 1b95fe31051f..61c4b9c41904 100644
--- a/include/linux/lockd/lockd.h
+++ b/include/linux/lockd/lockd.h
@@ -200,7 +200,7 @@ extern const struct svc_procedure nlmsvc_procedures[24];
 extern const struct svc_procedure nlmsvc_procedures4[24];
 #endif
 extern int			nlmsvc_grace_period;
-extern unsigned long		nlmsvc_timeout;
+extern unsigned long		nlm_timeout;
 extern bool			nsm_use_hostnames;
 extern u32			nsm_local_state;
 
-- 
2.44.0


  reply	other threads:[~2024-07-15  7:47 UTC|newest]

Thread overview: 37+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2024-07-15  7:14 [PATCH 00/14 RFC] support automatic changes to nfsd thread count NeilBrown
2024-07-15  7:14 ` NeilBrown [this message]
2024-07-15  7:14 ` [PATCH 02/14] SUNRPC: make various functions static, or not exported NeilBrown
2024-07-15  7:14 ` [PATCH 03/14] nfsd: move nfsd_pool_stats_open into nfsctl.c NeilBrown
2024-07-15  7:14 ` [PATCH 04/14] nfsd: don't allocate the versions array NeilBrown
2024-08-02 21:34   ` Mike Snitzer
2024-08-02 23:04     ` NeilBrown
2024-08-05  4:55       ` NeilBrown
2024-07-15  7:14 ` [PATCH 05/14] sunrpc: change sp_nrthreads from atomic_t to unsigned int NeilBrown
2024-07-15 14:12   ` Jeff Layton
2024-07-15 14:33     ` Jeff Layton
2024-07-16  1:33     ` NeilBrown
2024-07-24 19:36       ` Chuck Lever
2024-07-15  7:14 ` [PATCH 06/14] sunrpc: don't take ->sv_lock when updating ->sv_nrthreads NeilBrown
2024-07-15  7:14 ` [PATCH 07/14] Change unshare_fs_struct() to never fail NeilBrown
2024-07-15 14:39   ` Jeff Layton
2024-07-16  1:48     ` NeilBrown
2024-07-15  7:14 ` [PATCH 08/14] SUNRPC: move nrthreads counting to start/stop threads NeilBrown
2024-07-15  7:14 ` [PATCH 09/14] nfsd: return hard failure for OP_SETCLIENTID when there are too many clients NeilBrown
2024-07-15 15:21   ` Jeff Layton
2024-07-15  7:14 ` [PATCH 10/14] nfs: dynamically adjust per-client DRC slot limits NeilBrown
2024-07-15  7:14 ` [PATCH 11/14] nfsd: don't use sv_nrthreads in connection limiting calculations NeilBrown
2024-07-15 15:52   ` Jeff Layton
2024-07-16  2:04     ` NeilBrown
2024-07-15  7:14 ` [PATCH 12/14] sunrpc: introduce possibility that requested number of threads is different from actual NeilBrown
2024-07-15 16:00   ` Jeff Layton
2024-07-15  7:14 ` [PATCH 13/14] nfsd: introduce concept of a maximum number of threads NeilBrown
2024-07-15 17:06   ` Jeff Layton
2024-07-16  3:21     ` NeilBrown
2024-07-16 11:00       ` Jeff Layton
2024-07-16 13:31         ` Chuck Lever III
2024-07-16 18:49           ` Tom Talpey
2024-07-17 15:24             ` Chuck Lever III
2024-07-15  7:14 ` [PATCH 14/14] nfsd: adjust number of running nfsd threads NeilBrown
2024-07-15 17:29 ` [PATCH 00/14 RFC] support automatic changes to nfsd thread count Jeff Layton
2024-07-24 19:43 ` Chuck Lever III
2024-07-24 21:25   ` NeilBrown

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20240715074657.18174-2-neilb@suse.de \
    --to=neilb@suse.de \
    --cc=Dai.Ngo@oracle.com \
    --cc=chuck.lever@oracle.com \
    --cc=jlayton@kernel.org \
    --cc=kolga@netapp.com \
    --cc=linux-nfs@vger.kernel.org \
    --cc=steved@redhat.com \
    --cc=tom@talpey.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox