[PATCH] NFSD: Fix trace_nfsd_slot_seqid_sequence

[cel@kernel.org]

From: Chuck Lever <chuck.lever@oracle.com>

While running down the problem triggered by disconnect injection,
I noticed the "in use" string was actually never hooked up in this
trace point, so it always showed the traced slot as not in use. But
what might be more useful is showing all the slot status flags.

Also, this trace point can record and report the slot's index
number, which among other things is useful for troubleshooting slot
table expansion and contraction.

Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
---
 fs/nfsd/trace.h | 19 +++++++++++++++----
 1 file changed, 15 insertions(+), 4 deletions(-)

diff --git a/fs/nfsd/trace.h b/fs/nfsd/trace.h
index ad2c0c432d08..49bbd26ffcdb 100644
--- a/fs/nfsd/trace.h
+++ b/fs/nfsd/trace.h
@@ -803,6 +803,14 @@ DEFINE_EVENT(nfsd_cs_slot_class, nfsd_##name, \
 DEFINE_CS_SLOT_EVENT(slot_seqid_conf);
 DEFINE_CS_SLOT_EVENT(slot_seqid_unconf);
 
+#define show_nfs_slot_flags(val)					\
+	__print_flags(val, "|",						\
+		{ NFSD4_SLOT_INUSE,		"INUSE" },		\
+		{ NFSD4_SLOT_CACHETHIS,		"CACHETHIS" },		\
+		{ NFSD4_SLOT_INITIALIZED,	"INITIALIZED" },	\
+		{ NFSD4_SLOT_CACHED,		"CACHED" },		\
+		{ NFSD4_SLOT_REUSED,		"REUSED" })
+
 TRACE_EVENT(nfsd_slot_seqid_sequence,
 	TP_PROTO(
 		const struct nfs4_client *clp,
@@ -813,10 +821,11 @@ TRACE_EVENT(nfsd_slot_seqid_sequence,
 	TP_STRUCT__entry(
 		__field(u32, seqid)
 		__field(u32, slot_seqid)
+		__field(u32, slot_index)
+		__field(unsigned long, slot_flags)
 		__field(u32, cl_boot)
 		__field(u32, cl_id)
 		__sockaddr(addr, clp->cl_cb_conn.cb_addrlen)
-		__field(bool, in_use)
 	),
 	TP_fast_assign(
 		__entry->cl_boot = clp->cl_clientid.cl_boot;
@@ -825,11 +834,13 @@ TRACE_EVENT(nfsd_slot_seqid_sequence,
 				  clp->cl_cb_conn.cb_addrlen);
 		__entry->seqid = seq->seqid;
 		__entry->slot_seqid = slot->sl_seqid;
+		__entry->slot_index = seq->slotid;
+		__entry->slot_flags = slot->sl_flags;
 	),
-	TP_printk("addr=%pISpc client %08x:%08x seqid=%u slot_seqid=%u (%sin use)",
+	TP_printk("addr=%pISpc client %08x:%08x idx=%u seqid=%u slot_seqid=%u flags=%s",
 		__get_sockaddr(addr), __entry->cl_boot, __entry->cl_id,
-		__entry->seqid, __entry->slot_seqid,
-		__entry->in_use ? "" : "not "
+		__entry->slot_index, __entry->seqid, __entry->slot_seqid,
+		show_nfs_slot_flags(__entry->slot_flags)
 	)
 );
 
-- 
2.47.0