From: cel@kernel.org
To: NeilBrown <neil@brown.name>, Jeff Layton <jlayton@kernel.org>,
Olga Kornievskaia <okorniev@redhat.com>,
Dai Ngo <dai.ngo@oracle.com>, Tom Talpey <tom@talpey.com>
Cc: <linux-nfs@vger.kernel.org>, <linux-rdma@vger.kernel.org>,
Chuck Lever <chuck.lever@oracle.com>
Subject: [PATCH v5 16/19] NFSD: Remove NFSD_BUFSIZE
Date: Fri, 9 May 2025 15:03:50 -0400 [thread overview]
Message-ID: <20250509190354.5393-17-cel@kernel.org> (raw)
In-Reply-To: <20250509190354.5393-1-cel@kernel.org>
From: Chuck Lever <chuck.lever@oracle.com>
Clean up: The documenting comment for NFSD_BUFSIZE is quite stale.
NFSD_BUFSIZE is used only for NFSv4 Reply these days; never for
NFSv2 or v3, and never for RPC Calls. Even so, the byte count
estimate does not include the size of the NFSv4 COMPOUND Reply
HEADER or the RPC auth flavor.
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: NeilBrown <neil@brown.name>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
---
fs/nfsd/nfs4proc.c | 2 +-
fs/nfsd/nfs4state.c | 2 +-
fs/nfsd/nfs4xdr.c | 2 +-
fs/nfsd/nfsd.h | 13 -------------
4 files changed, 3 insertions(+), 16 deletions(-)
diff --git a/fs/nfsd/nfs4proc.c b/fs/nfsd/nfs4proc.c
index ffd8b1d499df..f28c8726755f 100644
--- a/fs/nfsd/nfs4proc.c
+++ b/fs/nfsd/nfs4proc.c
@@ -3845,7 +3845,7 @@ static const struct svc_procedure nfsd_procedures4[2] = {
.pc_ressize = sizeof(struct nfsd4_compoundres),
.pc_release = nfsd4_release_compoundargs,
.pc_cachetype = RC_NOCACHE,
- .pc_xdrressize = NFSD_BUFSIZE/4,
+ .pc_xdrressize = 3+NFSSVC_MAXBLKSIZE/4,
.pc_name = "COMPOUND",
},
};
diff --git a/fs/nfsd/nfs4state.c b/fs/nfsd/nfs4state.c
index ff6a3870cc6d..911ad4ecfe30 100644
--- a/fs/nfsd/nfs4state.c
+++ b/fs/nfsd/nfs4state.c
@@ -4394,7 +4394,7 @@ nfsd4_sequence(struct svc_rqst *rqstp, struct nfsd4_compound_state *cstate,
nfserr_rep_too_big;
if (xdr_restrict_buflen(xdr, buflen - rqstp->rq_auth_slack))
goto out_put_session;
- svc_reserve(rqstp, buflen);
+ svc_reserve_auth(rqstp, buflen);
status = nfs_ok;
/* Success! accept new slot seqid */
diff --git a/fs/nfsd/nfs4xdr.c b/fs/nfsd/nfs4xdr.c
index 9eb8e5704622..b5742d86b88d 100644
--- a/fs/nfsd/nfs4xdr.c
+++ b/fs/nfsd/nfs4xdr.c
@@ -2564,7 +2564,7 @@ nfsd4_decode_compound(struct nfsd4_compoundargs *argp)
/* Sessions make the DRC unnecessary: */
if (argp->minorversion)
cachethis = false;
- svc_reserve(argp->rqstp, max_reply + readbytes);
+ svc_reserve_auth(argp->rqstp, max_reply + readbytes);
argp->rqstp->rq_cachetype = cachethis ? RC_REPLBUFF : RC_NOCACHE;
argp->splice_ok = nfsd_read_splice_ok(argp->rqstp);
diff --git a/fs/nfsd/nfsd.h b/fs/nfsd/nfsd.h
index 232aee06223d..b9ac81023c13 100644
--- a/fs/nfsd/nfsd.h
+++ b/fs/nfsd/nfsd.h
@@ -50,19 +50,6 @@ bool nfsd_support_version(int vers);
/* NFSv2 is limited by the protocol specification, see RFC 1094 */
#define NFSSVC_MAXBLKSIZE_V2 (8*1024)
-
-/*
- * Largest number of bytes we need to allocate for an NFS
- * call or reply. Used to control buffer sizes. We use
- * the length of v3 WRITE, READDIR and READDIR replies
- * which are an RPC header, up to 26 XDR units of reply
- * data, and some page data.
- *
- * Note that accuracy here doesn't matter too much as the
- * size is rounded up to a page size when allocating space.
- */
-#define NFSD_BUFSIZE ((RPC_MAX_HEADER_WITH_AUTH+26)*XDR_UNIT + NFSSVC_MAXBLKSIZE)
-
struct readdir_cd {
__be32 err; /* 0, nfserr, or nfserr_eof */
};
--
2.49.0
next prev parent reply other threads:[~2025-05-09 19:04 UTC|newest]
Thread overview: 28+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-05-09 19:03 [PATCH v5 00/19] Allocate payload arrays dynamically cel
2025-05-09 19:03 ` [PATCH v5 01/19] svcrdma: Reduce the number of rdma_rw contexts per-QP cel
2025-05-13 12:00 ` Jeff Layton
2025-05-09 19:03 ` [PATCH v5 02/19] sunrpc: Add a helper to derive maxpages from sv_max_mesg cel
2025-05-09 19:03 ` [PATCH v5 03/19] sunrpc: Remove backchannel check in svc_init_buffer() cel
2025-05-09 19:03 ` [PATCH v5 04/19] sunrpc: Replace the rq_pages array with dynamically-allocated memory cel
2025-05-09 19:03 ` [PATCH v5 05/19] sunrpc: Replace the rq_bvec " cel
2025-05-09 19:03 ` [PATCH v5 06/19] NFSD: Use rqstp->rq_bvec in nfsd_iter_read() cel
2025-05-09 19:03 ` [PATCH v5 07/19] NFSD: De-duplicate the svc_fill_write_vector() call sites cel
2025-05-13 12:02 ` Jeff Layton
2025-05-09 19:03 ` [PATCH v5 08/19] SUNRPC: Export xdr_buf_to_bvec() cel
2025-05-09 19:03 ` [PATCH v5 09/19] NFSD: Use rqstp->rq_bvec in nfsd_iter_write() cel
2025-05-09 19:03 ` [PATCH v5 10/19] SUNRPC: Remove svc_fill_write_vector() cel
2025-05-09 19:03 ` [PATCH v5 11/19] SUNRPC: Remove svc_rqst :: rq_vec cel
2025-05-09 19:03 ` [PATCH v5 12/19] sunrpc: Adjust size of socket's receive page array dynamically cel
2025-05-09 19:03 ` [PATCH v5 13/19] svcrdma: Adjust the number of entries in svc_rdma_recv_ctxt::rc_pages cel
2025-05-09 19:03 ` [PATCH v5 14/19] svcrdma: Adjust the number of entries in svc_rdma_send_ctxt::sc_pages cel
2025-05-09 19:03 ` [PATCH v5 15/19] sunrpc: Remove the RPCSVC_MAXPAGES macro cel
2025-05-09 19:03 ` cel [this message]
2025-05-09 19:03 ` [PATCH v5 17/19] NFSD: Remove NFSSVC_MAXBLKSIZE_V2 macro cel
2025-05-09 19:03 ` [PATCH v5 18/19] NFSD: Add a "default" block size cel
2025-05-09 19:03 ` [PATCH v5 19/19] SUNRPC: Bump the maximum payload size for the server cel
2025-05-12 16:44 ` Aurélien Couderc
2025-05-12 18:09 ` Chuck Lever
2025-05-13 8:42 ` Aurélien Couderc
2025-05-13 12:08 ` Chuck Lever
2025-05-14 0:11 ` NeilBrown
2025-05-13 12:05 ` [PATCH v5 00/19] Allocate payload arrays dynamically Jeff Layton
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20250509190354.5393-17-cel@kernel.org \
--to=cel@kernel.org \
--cc=chuck.lever@oracle.com \
--cc=dai.ngo@oracle.com \
--cc=jlayton@kernel.org \
--cc=linux-nfs@vger.kernel.org \
--cc=linux-rdma@vger.kernel.org \
--cc=neil@brown.name \
--cc=okorniev@redhat.com \
--cc=tom@talpey.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox