From: Sergey Bashirov <sergeybashirov@gmail.com>
To: Chuck Lever <chuck.lever@oracle.com>,
Christoph Hellwig <hch@infradead.org>,
Jeff Layton <jlayton@kernel.org>, NeilBrown <neil@brown.name>,
Olga Kornievskaia <okorniev@redhat.com>,
Dai Ngo <Dai.Ngo@oracle.com>, Tom Talpey <tom@talpey.com>
Cc: linux-nfs@vger.kernel.org, linux-kernel@vger.kernel.org,
Konstantin Evtushenko <koevtushenko@yandex.com>,
Sergey Bashirov <sergeybashirov@gmail.com>
Subject: [PATCH v4 1/2] nfsd: Drop dprintk in blocklayout xdr functions
Date: Sat, 21 Jun 2025 19:52:44 +0300 [thread overview]
Message-ID: <20250621165409.147744-2-sergeybashirov@gmail.com> (raw)
In-Reply-To: <20250621165409.147744-1-sergeybashirov@gmail.com>
Minor clean up. Instead of dprintk there are appropriate error codes.
Signed-off-by: Sergey Bashirov <sergeybashirov@gmail.com>
---
fs/nfsd/blocklayoutxdr.c | 40 +++++++---------------------------------
1 file changed, 7 insertions(+), 33 deletions(-)
diff --git a/fs/nfsd/blocklayoutxdr.c b/fs/nfsd/blocklayoutxdr.c
index 669ff8e6e966..bcf21fde9120 100644
--- a/fs/nfsd/blocklayoutxdr.c
+++ b/fs/nfsd/blocklayoutxdr.c
@@ -139,28 +139,19 @@ nfsd4_block_decode_layoutupdate(__be32 *p, u32 len, struct iomap **iomapp,
struct iomap *iomaps;
u32 nr_iomaps, i;
- if (len < sizeof(u32)) {
- dprintk("%s: extent array too small: %u\n", __func__, len);
+ if (len < sizeof(u32))
return nfserr_bad_xdr;
- }
len -= sizeof(u32);
- if (len % PNFS_BLOCK_EXTENT_SIZE) {
- dprintk("%s: extent array invalid: %u\n", __func__, len);
+ if (len % PNFS_BLOCK_EXTENT_SIZE)
return nfserr_bad_xdr;
- }
nr_iomaps = be32_to_cpup(p++);
- if (nr_iomaps != len / PNFS_BLOCK_EXTENT_SIZE) {
- dprintk("%s: extent array size mismatch: %u/%u\n",
- __func__, len, nr_iomaps);
+ if (nr_iomaps != len / PNFS_BLOCK_EXTENT_SIZE)
return nfserr_bad_xdr;
- }
iomaps = kcalloc(nr_iomaps, sizeof(*iomaps), GFP_KERNEL);
- if (!iomaps) {
- dprintk("%s: failed to allocate extent array\n", __func__);
+ if (!iomaps)
return nfserr_delay;
- }
for (i = 0; i < nr_iomaps; i++) {
struct pnfs_block_extent bex;
@@ -170,26 +161,18 @@ nfsd4_block_decode_layoutupdate(__be32 *p, u32 len, struct iomap **iomapp,
p = xdr_decode_hyper(p, &bex.foff);
if (bex.foff & (block_size - 1)) {
- dprintk("%s: unaligned offset 0x%llx\n",
- __func__, bex.foff);
goto fail;
}
p = xdr_decode_hyper(p, &bex.len);
if (bex.len & (block_size - 1)) {
- dprintk("%s: unaligned length 0x%llx\n",
- __func__, bex.foff);
goto fail;
}
p = xdr_decode_hyper(p, &bex.soff);
if (bex.soff & (block_size - 1)) {
- dprintk("%s: unaligned disk offset 0x%llx\n",
- __func__, bex.soff);
goto fail;
}
bex.es = be32_to_cpup(p++);
if (bex.es != PNFS_BLOCK_READWRITE_DATA) {
- dprintk("%s: incorrect extent state %d\n",
- __func__, bex.es);
goto fail;
}
@@ -231,38 +214,29 @@ nfsd4_scsi_decode_layoutupdate(__be32 *p, u32 len, struct iomap **iomapp,
struct iomap *iomaps;
u32 nr_iomaps, expected, i;
- if (len < sizeof(u32)) {
- dprintk("%s: extent array too small: %u\n", __func__, len);
+ if (len < sizeof(u32))
return nfserr_bad_xdr;
- }
nr_iomaps = be32_to_cpup(p++);
expected = sizeof(__be32) + nr_iomaps * PNFS_SCSI_RANGE_SIZE;
- if (len != expected) {
- dprintk("%s: extent array size mismatch: %u/%u\n",
- __func__, len, expected);
+ if (len != expected)
return nfserr_bad_xdr;
- }
iomaps = kcalloc(nr_iomaps, sizeof(*iomaps), GFP_KERNEL);
- if (!iomaps) {
- dprintk("%s: failed to allocate extent array\n", __func__);
+ if (!iomaps)
return nfserr_delay;
- }
for (i = 0; i < nr_iomaps; i++) {
u64 val;
p = xdr_decode_hyper(p, &val);
if (val & (block_size - 1)) {
- dprintk("%s: unaligned offset 0x%llx\n", __func__, val);
goto fail;
}
iomaps[i].offset = val;
p = xdr_decode_hyper(p, &val);
if (val & (block_size - 1)) {
- dprintk("%s: unaligned length 0x%llx\n", __func__, val);
goto fail;
}
iomaps[i].length = val;
--
2.43.0
next prev parent reply other threads:[~2025-06-21 16:54 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-06-21 16:52 [PATCH v4 0/2] nfsd: Implement large extent array support in pNFS Sergey Bashirov
2025-06-21 16:52 ` Sergey Bashirov [this message]
2025-06-21 18:46 ` [PATCH v4 1/2] nfsd: Drop dprintk in blocklayout xdr functions Jeff Layton
2025-06-23 7:34 ` Christoph Hellwig
2025-06-21 16:52 ` [PATCH v4 2/2] nfsd: Implement large extent array support in pNFS Sergey Bashirov
2025-06-21 19:08 ` Jeff Layton
2025-06-23 7:41 ` Christoph Hellwig
2025-06-23 13:50 ` [PATCH v4 0/2] " Chuck Lever
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20250621165409.147744-2-sergeybashirov@gmail.com \
--to=sergeybashirov@gmail.com \
--cc=Dai.Ngo@oracle.com \
--cc=chuck.lever@oracle.com \
--cc=hch@infradead.org \
--cc=jlayton@kernel.org \
--cc=koevtushenko@yandex.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-nfs@vger.kernel.org \
--cc=neil@brown.name \
--cc=okorniev@redhat.com \
--cc=tom@talpey.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox