linux-nfs.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Mike Snitzer <snitzer@kernel.org>
To: Chuck Lever <chuck.lever@oracle.com>, Jeff Layton <jlayton@kernel.org>
Cc: linux-nfs@vger.kernel.org
Subject: [PATCH v6 4/7] NFSD: add io_cache_write controls to debugfs interface
Date: Sat,  9 Aug 2025 01:02:54 -0400	[thread overview]
Message-ID: <20250809050257.27355-5-snitzer@kernel.org> (raw)
In-Reply-To: <20250809050257.27355-1-snitzer@kernel.org>

Add 'io_cache_write' to NFSD's debugfs interface so that: Any data
written by NFSD will either be:
- cached using page cache (NFSD_IO_BUFFERED=1)
- cached but removed from the page cache upon completion
  (NFSD_IO_DONTCACHE=2).
- not cached (NFSD_IO_DIRECT=3)

io_cache_write may be set by writing to:
  /sys/kernel/debug/nfsd/io_cache_write

If NFSD_IO_DONTCACHE is specified using 2, FOP_DONTCACHE must be
advertised as supported by the underlying filesystem (e.g. XFS),
otherwise all IO flagged with RWF_DONTCACHE will fail with
-EOPNOTSUPP.

If NFSD_IO_DIRECT is specified using 3, the IO must be aligned
relative to the underlying block device's logical_block_size. Also the
memory buffer used to store the WRITE payload must be aligned relative
to the underlying block device's dma_alignment.

Signed-off-by: Mike Snitzer <snitzer@kernel.org>
---
 fs/nfsd/debugfs.c | 43 +++++++++++++++++++++++++++++++++++++++++++
 fs/nfsd/nfsd.h    |  1 +
 fs/nfsd/vfs.c     | 16 ++++++++++++++++
 3 files changed, 60 insertions(+)

diff --git a/fs/nfsd/debugfs.c b/fs/nfsd/debugfs.c
index 3cadd45868b48..8878c3519b30c 100644
--- a/fs/nfsd/debugfs.c
+++ b/fs/nfsd/debugfs.c
@@ -86,6 +86,46 @@ static int nfsd_io_cache_read_set(void *data, u64 val)
 DEFINE_DEBUGFS_ATTRIBUTE(nfsd_io_cache_read_fops, nfsd_io_cache_read_get,
 			 nfsd_io_cache_read_set, "%llu\n");
 
+/*
+ * /sys/kernel/debug/nfsd/io_cache_write
+ *
+ * Contents:
+ *   %1: NFS WRITE will use buffered IO
+ *   %2: NFS WRITE will use dontcache (buffered IO w/ dropbehind)
+ *   %3: NFS WRITE will use direct IO
+ *
+ * The default value of this setting is zero (UNSPECIFIED).
+ * This setting takes immediate effect for all NFS versions,
+ * all exports, and in all NFSD net namespaces.
+ */
+
+static int nfsd_io_cache_write_get(void *data, u64 *val)
+{
+	*val = nfsd_io_cache_write;
+	return 0;
+}
+
+static int nfsd_io_cache_write_set(void *data, u64 val)
+{
+	int ret = 0;
+
+	switch (val) {
+	case NFSD_IO_BUFFERED:
+	case NFSD_IO_DONTCACHE:
+	case NFSD_IO_DIRECT:
+		nfsd_io_cache_write = val;
+		break;
+	default:
+		ret = -EINVAL;
+		break;
+	}
+
+	return ret;
+}
+
+DEFINE_DEBUGFS_ATTRIBUTE(nfsd_io_cache_write_fops, nfsd_io_cache_write_get,
+			 nfsd_io_cache_write_set, "%llu\n");
+
 void nfsd_debugfs_exit(void)
 {
 	debugfs_remove_recursive(nfsd_top_dir);
@@ -101,4 +141,7 @@ void nfsd_debugfs_init(void)
 
 	debugfs_create_file("io_cache_read", S_IWUSR | S_IRUGO,
 			    nfsd_top_dir, NULL, &nfsd_io_cache_read_fops);
+
+	debugfs_create_file("io_cache_write", S_IWUSR | S_IRUGO,
+			    nfsd_top_dir, NULL, &nfsd_io_cache_write_fops);
 }
diff --git a/fs/nfsd/nfsd.h b/fs/nfsd/nfsd.h
index 6ef799405145f..fe935b4cda538 100644
--- a/fs/nfsd/nfsd.h
+++ b/fs/nfsd/nfsd.h
@@ -161,6 +161,7 @@ enum {
 };
 
 extern u64 nfsd_io_cache_read __read_mostly;
+extern u64 nfsd_io_cache_write __read_mostly;
 
 extern int nfsd_max_blksize;
 
diff --git a/fs/nfsd/vfs.c b/fs/nfsd/vfs.c
index 8ea8b80097195..c340708fbab4d 100644
--- a/fs/nfsd/vfs.c
+++ b/fs/nfsd/vfs.c
@@ -50,6 +50,7 @@
 
 bool nfsd_disable_splice_read __read_mostly;
 u64 nfsd_io_cache_read __read_mostly;
+u64 nfsd_io_cache_write __read_mostly;
 
 /**
  * nfserrno - Map Linux errnos to NFS errnos
@@ -1242,6 +1243,21 @@ nfsd_vfs_write(struct svc_rqst *rqstp, struct svc_fh *fhp,
 	since = READ_ONCE(file->f_wb_err);
 	if (verf)
 		nfsd_copy_write_verifier(verf, nn);
+
+	switch (nfsd_io_cache_write) {
+	case NFSD_IO_DIRECT:
+		/* direct I/O must be aligned to device logical sector size */
+		if (nf->nf_dio_mem_align && nf->nf_dio_offset_align &&
+		    (((offset | *cnt) & (nf->nf_dio_offset_align-1)) == 0))
+			kiocb.ki_flags |= IOCB_DIRECT;
+		break;
+	case NFSD_IO_DONTCACHE:
+		kiocb.ki_flags |= IOCB_DONTCACHE;
+		fallthrough;
+	case NFSD_IO_UNSPECIFIED:
+	case NFSD_IO_BUFFERED:
+		break;
+	}
 	host_err = vfs_iocb_iter_write(file, &kiocb, &iter);
 	if (host_err < 0) {
 		commit_reset_write_verifier(nn, rqstp, host_err);
-- 
2.44.0


  parent reply	other threads:[~2025-08-09  5:03 UTC|newest]

Thread overview: 9+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2025-08-09  5:02 [PATCH v6 0/7] NFSD: add "NFSD DIRECT" and "NFSD DONTCACHE" IO modes Mike Snitzer
2025-08-09  5:02 ` [PATCH v6 1/7] NFSD: filecache: add STATX_DIOALIGN and STATX_DIO_READ_ALIGN support Mike Snitzer
2025-08-09  5:02 ` [PATCH v6 2/7] NFSD: pass nfsd_file to nfsd_iter_read() Mike Snitzer
2025-08-09  5:02 ` [PATCH v6 3/7] NFSD: add io_cache_read controls to debugfs interface Mike Snitzer
2025-08-09  5:02 ` Mike Snitzer [this message]
2025-08-09  5:02 ` [PATCH v6 5/7] NFSD: issue READs using O_DIRECT even if IO is misaligned Mike Snitzer
2025-08-09  5:02 ` [PATCH v6 6/7] NFSD: issue WRITEs " Mike Snitzer
2025-08-09  5:02 ` [PATCH v6 7/7] NFSD: add nfsd_analyze_read_dio and nfsd_analyze_write_dio trace events Mike Snitzer
2025-08-13 22:41 ` [PATCH v6 0/7] NFSD: add "NFSD DIRECT" and "NFSD DONTCACHE" IO modes Mike Snitzer

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20250809050257.27355-5-snitzer@kernel.org \
    --to=snitzer@kernel.org \
    --cc=chuck.lever@oracle.com \
    --cc=jlayton@kernel.org \
    --cc=linux-nfs@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).