From: Chuck Lever <cel@kernel.org>
To: NeilBrown <neilb@ownmail.net>, Jeff Layton <jlayton@kernel.org>,
Olga Kornievskaia <okorniev@redhat.com>,
Dai Ngo <dai.ngo@oracle.com>, Tom Talpey <tom@talpey.com>
Cc: <linux-nfs@vger.kernel.org>, Rick Macklem <rmacklem@uoguelph.ca>
Subject: [PATCH v3 09/13] NFSD: Refactor nfsd_setattr()'s ACL error reporting
Date: Fri, 9 Jan 2026 11:21:38 -0500 [thread overview]
Message-ID: <20260109162143.4186112-10-cel@kernel.org> (raw)
In-Reply-To: <20260109162143.4186112-1-cel@kernel.org>
From: Rick Macklem <rmacklem@uoguelph.ca>
Support for FATTR4_POSIX_ACCESS_ACL and FATTR4_POSIX_DEFAULT_ACL
attributes in subsequent patches allows clients to set both ACL
types simultaneously during SETATTR and file creation. Each ACL
type can succeed or fail independently, requiring the server to
clear individual attribute bits in the reply bitmap when one
fails while the other succeeds.
The existing na_aclerr field cannot distinguish which ACL type
encountered an error. Separate error fields (na_paclerr for
access ACLs, na_dpaclerr for default ACLs) enable the server to
report per-ACL-type failures accurately.
This refactoring also adds validation previously absent: default
ACL processing rejects non-directory targets with EINVAL and
passes NULL to set_posix_acl() when a_count is zero to delete
the ACL. Access ACL processing rejects zero a_count with EINVAL
for ACL_SCOPE_FILE_SYSTEM semantics (the only scope currently
supported).
The changes preserve compatibility with existing NFSv4 ACL code.
NFSv4 ACL conversion (nfs4_acl_nfsv4_to_posix()) never produces
POSIX ACLs with a_count == 0, so the new validation logic only
affects future POSIX ACL attribute handling.
Signed-off-by: Rick Macklem <rmacklem@uoguelph.ca>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
---
fs/nfsd/nfs4proc.c | 8 +++++---
fs/nfsd/vfs.c | 34 +++++++++++++++++++++++++++-------
fs/nfsd/vfs.h | 3 ++-
3 files changed, 34 insertions(+), 11 deletions(-)
diff --git a/fs/nfsd/nfs4proc.c b/fs/nfsd/nfs4proc.c
index a77ec0685eee..2da092f9ac40 100644
--- a/fs/nfsd/nfs4proc.c
+++ b/fs/nfsd/nfs4proc.c
@@ -377,7 +377,7 @@ nfsd4_create_file(struct svc_rqst *rqstp, struct svc_fh *fhp,
if (attrs.na_labelerr)
open->op_bmval[2] &= ~FATTR4_WORD2_SECURITY_LABEL;
- if (attrs.na_aclerr)
+ if (attrs.na_paclerr || attrs.na_dpaclerr)
open->op_bmval[0] &= ~FATTR4_WORD0_ACL;
out:
end_creating(child);
@@ -858,7 +858,7 @@ nfsd4_create(struct svc_rqst *rqstp, struct nfsd4_compound_state *cstate,
if (attrs.na_labelerr)
create->cr_bmval[2] &= ~FATTR4_WORD2_SECURITY_LABEL;
- if (attrs.na_aclerr)
+ if (attrs.na_paclerr || attrs.na_dpaclerr)
create->cr_bmval[0] &= ~FATTR4_WORD0_ACL;
set_change_info(&create->cr_cinfo, &cstate->current_fh);
fh_dup2(&cstate->current_fh, &resfh);
@@ -1232,7 +1232,9 @@ nfsd4_setattr(struct svc_rqst *rqstp, struct nfsd4_compound_state *cstate,
if (!status)
status = nfserrno(attrs.na_labelerr);
if (!status)
- status = nfserrno(attrs.na_aclerr);
+ status = nfserrno(attrs.na_dpaclerr);
+ if (!status)
+ status = nfserrno(attrs.na_paclerr);
out:
nfsd_attrs_free(&attrs);
fh_drop_write(&cstate->current_fh);
diff --git a/fs/nfsd/vfs.c b/fs/nfsd/vfs.c
index 168d3ccc8155..c884c3f34afb 100644
--- a/fs/nfsd/vfs.c
+++ b/fs/nfsd/vfs.c
@@ -596,15 +596,35 @@ nfsd_setattr(struct svc_rqst *rqstp, struct svc_fh *fhp,
if (attr->na_seclabel && attr->na_seclabel->len)
attr->na_labelerr = security_inode_setsecctx(dentry,
attr->na_seclabel->data, attr->na_seclabel->len);
- if (IS_ENABLED(CONFIG_FS_POSIX_ACL) && attr->na_pacl)
- attr->na_aclerr = set_posix_acl(&nop_mnt_idmap,
- dentry, ACL_TYPE_ACCESS,
- attr->na_pacl);
- if (IS_ENABLED(CONFIG_FS_POSIX_ACL) &&
- !attr->na_aclerr && attr->na_dpacl && S_ISDIR(inode->i_mode))
- attr->na_aclerr = set_posix_acl(&nop_mnt_idmap,
+ if (IS_ENABLED(CONFIG_FS_POSIX_ACL) && attr->na_dpacl) {
+ if (!S_ISDIR(inode->i_mode))
+ attr->na_dpaclerr = -EINVAL;
+ else if (attr->na_dpacl->a_count > 0)
+ /* a_count == 0 means delete the ACL. */
+ attr->na_dpaclerr = set_posix_acl(&nop_mnt_idmap,
dentry, ACL_TYPE_DEFAULT,
attr->na_dpacl);
+ else
+ attr->na_dpaclerr = set_posix_acl(&nop_mnt_idmap,
+ dentry, ACL_TYPE_DEFAULT,
+ NULL);
+ }
+ if (IS_ENABLED(CONFIG_FS_POSIX_ACL) && attr->na_pacl) {
+ /*
+ * For any file system that is not ACL_SCOPE_FILE_OBJECT,
+ * a_count == 0 MUST reply nfserr_inval.
+ * For a file system that is ACL_SCOPE_FILE_OBJECT,
+ * a_count == 0 deletes the ACL.
+ * XXX File systems that are ACL_SCOPE_FILE_OBJECT
+ * are not yet supported.
+ */
+ if (attr->na_pacl->a_count > 0)
+ attr->na_paclerr = set_posix_acl(&nop_mnt_idmap,
+ dentry, ACL_TYPE_ACCESS,
+ attr->na_pacl);
+ else
+ attr->na_paclerr = -EINVAL;
+ }
out_fill_attrs:
/*
* RFC 1813 Section 3.3.2 does not mandate that an NFS server
diff --git a/fs/nfsd/vfs.h b/fs/nfsd/vfs.h
index e192dca4a679..702a844f2106 100644
--- a/fs/nfsd/vfs.h
+++ b/fs/nfsd/vfs.h
@@ -53,7 +53,8 @@ struct nfsd_attrs {
struct posix_acl *na_dpacl; /* input */
int na_labelerr; /* output */
- int na_aclerr; /* output */
+ int na_dpaclerr; /* output */
+ int na_paclerr; /* output */
};
static inline void nfsd_attrs_free(struct nfsd_attrs *attrs)
--
2.52.0
next prev parent reply other threads:[~2026-01-09 16:21 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-01-09 16:21 [PATCH v3 00/13] Add NFSv4.2 POSIX ACL support Chuck Lever
2026-01-09 16:21 ` [PATCH v3 01/13] xdrgen: Implement pass-through lines in specifications Chuck Lever
2026-01-09 16:21 ` [PATCH v3 02/13] NFSD: Add a Kconfig setting to enable support for NFSv4 POSIX ACLs Chuck Lever
2026-01-09 16:21 ` [PATCH v3 03/13] Add RPC language definition of NFSv4 POSIX ACL extension Chuck Lever
2026-01-09 16:21 ` [PATCH v3 04/13] NFSD: Add nfsd4_encode_fattr4_acl_trueform Chuck Lever
2026-01-09 16:21 ` [PATCH v3 05/13] NFSD: Add nfsd4_encode_fattr4_acl_trueform_scope Chuck Lever
2026-01-09 16:21 ` [PATCH v3 06/13] NFSD: Add nfsd4_encode_fattr4_posix_default_acl Chuck Lever
2026-01-09 16:21 ` [PATCH v3 07/13] NFSD: Add nfsd4_encode_fattr4_posix_access_acl Chuck Lever
2026-01-09 16:21 ` [PATCH v3 08/13] NFSD: Do not allow NFSv4 (N)VERIFY to check POSIX ACL attributes Chuck Lever
2026-01-09 16:21 ` Chuck Lever [this message]
2026-01-09 16:21 ` [PATCH v3 10/13] NFSD: Add support for XDR decoding POSIX draft ACLs Chuck Lever
2026-01-09 16:21 ` [PATCH v3 11/13] NFSD: Add support for POSIX draft ACLs for file creation Chuck Lever
2026-01-09 16:21 ` [PATCH v3 12/13] NFSD: Add POSIX draft ACL support to the NFSv4 SETATTR operation Chuck Lever
2026-01-09 16:21 ` [PATCH v3 13/13] NFSD: Add POSIX ACL file attributes to SUPPATTR bitmasks Chuck Lever
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260109162143.4186112-10-cel@kernel.org \
--to=cel@kernel.org \
--cc=dai.ngo@oracle.com \
--cc=jlayton@kernel.org \
--cc=linux-nfs@vger.kernel.org \
--cc=neilb@ownmail.net \
--cc=okorniev@redhat.com \
--cc=rmacklem@uoguelph.ca \
--cc=tom@talpey.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox