From: Chuck Lever <cel@kernel.org>
To: NeilBrown <neilb@ownmail.net>, Jeff Layton <jlayton@kernel.org>,
Olga Kornievskaia <okorniev@redhat.com>,
Dai Ngo <dai.ngo@oracle.com>, Tom Talpey <tom@talpey.com>
Cc: <linux-nfs@vger.kernel.org>, Chuck Lever <chuck.lever@oracle.com>
Subject: [PATCH v2 16/18] sunrpc: skip svc_xprt_enqueue when no work is pending
Date: Fri, 27 Feb 2026 09:03:43 -0500 [thread overview]
Message-ID: <20260227140345.40488-17-cel@kernel.org> (raw)
In-Reply-To: <20260227140345.40488-1-cel@kernel.org>
From: Chuck Lever <chuck.lever@oracle.com>
svc_reserve() and svc_xprt_release_slot() call
svc_xprt_enqueue() after modifying xpt_reserved or
xpt_nr_rqsts. The purpose is to re-dispatch the
transport when write-space or a slot becomes available.
However, when neither XPT_DATA nor XPT_DEFERRED is
set, no thread can make progress on the transport and
the enqueue accomplishes nothing.
Trace data from a 256KB NFSv3 WRITE workload over RDMA
shows 11.2 svc_xprt_enqueue() calls per RPC. Of these,
6.9 per RPC lack XPT_DATA and exit svc_xprt_ready()
immediately after executing the smp_rmb(), READ_ONCE(),
and tracepoint. svc_reserve() and svc_xprt_release_slot()
account for roughly five of these per RPC.
A new helper, svc_xprt_resource_released(), checks
XPT_DATA | XPT_DEFERRED before calling
svc_xprt_enqueue(). The existing smp_wmb() barriers
are upgraded to smp_mb() to ensure the flags check
observes a concurrent producer's set_bit(XPT_DATA).
Each producer (svc_rdma_wc_receive, etc.) both sets
XPT_DATA and calls svc_xprt_enqueue(), so even if the
check reads a stale value, the producer's own enqueue
provides a fallback path.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
---
net/sunrpc/svc_xprt.c | 25 ++++++++++++++++++++-----
1 file changed, 20 insertions(+), 5 deletions(-)
diff --git a/net/sunrpc/svc_xprt.c b/net/sunrpc/svc_xprt.c
index 56a663b8939f..73149280167c 100644
--- a/net/sunrpc/svc_xprt.c
+++ b/net/sunrpc/svc_xprt.c
@@ -425,13 +425,28 @@ static bool svc_xprt_reserve_slot(struct svc_rqst *rqstp, struct svc_xprt *xprt)
return true;
}
+/*
+ * After a caller releases write-space or a request slot,
+ * re-enqueue the transport only when there is pending
+ * work that a thread could act on. The smp_mb() pairs
+ * with the smp_rmb() in svc_xprt_ready() and orders the
+ * preceding counter update before the flags read so a
+ * concurrent set_bit(XPT_DATA) is visible here.
+ */
+static void svc_xprt_resource_released(struct svc_xprt *xprt)
+{
+ smp_mb();
+ if (READ_ONCE(xprt->xpt_flags) &
+ (BIT(XPT_DATA) | BIT(XPT_DEFERRED)))
+ svc_xprt_enqueue(xprt);
+}
+
static void svc_xprt_release_slot(struct svc_rqst *rqstp)
{
struct svc_xprt *xprt = rqstp->rq_xprt;
if (test_and_clear_bit(RQ_DATA, &rqstp->rq_flags)) {
atomic_dec(&xprt->xpt_nr_rqsts);
- smp_wmb(); /* See smp_rmb() in svc_xprt_ready() */
- svc_xprt_enqueue(xprt);
+ svc_xprt_resource_released(xprt);
}
}
@@ -525,10 +540,10 @@ void svc_reserve(struct svc_rqst *rqstp, int space)
space += rqstp->rq_res.head[0].iov_len;
if (xprt && space < rqstp->rq_reserved) {
- atomic_sub((rqstp->rq_reserved - space), &xprt->xpt_reserved);
+ atomic_sub((rqstp->rq_reserved - space),
+ &xprt->xpt_reserved);
rqstp->rq_reserved = space;
- smp_wmb(); /* See smp_rmb() in svc_xprt_ready() */
- svc_xprt_enqueue(xprt);
+ svc_xprt_resource_released(xprt);
}
}
EXPORT_SYMBOL_GPL(svc_reserve);
--
2.53.0
next prev parent reply other threads:[~2026-02-27 14:04 UTC|newest]
Thread overview: 19+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-02-27 14:03 [PATCH v2 00/18] svcrdma performance scalability enhancements Chuck Lever
2026-02-27 14:03 ` [PATCH v2 01/18] svcrdma: Add fair queuing for Send Queue access Chuck Lever
2026-02-27 14:03 ` [PATCH v2 02/18] svcrdma: Clean up use of rdma->sc_pd->device in Receive paths Chuck Lever
2026-02-27 14:03 ` [PATCH v2 03/18] svcrdma: Clean up use of rdma->sc_pd->device Chuck Lever
2026-02-27 14:03 ` [PATCH v2 04/18] svcrdma: Add Write chunk WRs to the RPC's Send WR chain Chuck Lever
2026-02-27 14:03 ` [PATCH v2 05/18] svcrdma: Factor out WR chain linking into helper Chuck Lever
2026-02-27 14:03 ` [PATCH v2 06/18] svcrdma: Reduce false sharing in struct svcxprt_rdma Chuck Lever
2026-02-27 14:03 ` [PATCH v2 07/18] svcrdma: Use lock-free list for Receive Queue tracking Chuck Lever
2026-02-27 14:03 ` [PATCH v2 08/18] svcrdma: Convert Read completion queue to use lock-free list Chuck Lever
2026-02-27 14:03 ` [PATCH v2 09/18] svcrdma: Release write chunk resources without re-queuing Chuck Lever
2026-02-27 14:03 ` [PATCH v2 10/18] svcrdma: Defer send context release to xpo_release_ctxt Chuck Lever
2026-02-27 14:03 ` [PATCH v2 11/18] svcrdma: Use watermark-based Receive Queue replenishment Chuck Lever
2026-02-27 14:03 ` [PATCH v2 12/18] svcrdma: Add per-recv_ctxt chunk context cache Chuck Lever
2026-02-27 14:03 ` [PATCH v2 13/18] svcrdma: clear XPT_DATA on sc_read_complete_q consumption Chuck Lever
2026-02-27 14:03 ` [PATCH v2 14/18] svcrdma: retry when receive queues drain transiently Chuck Lever
2026-02-27 14:03 ` [PATCH v2 15/18] svcrdma: clear XPT_DATA on sc_rq_dto_q consumption Chuck Lever
2026-02-27 14:03 ` Chuck Lever [this message]
2026-02-27 14:03 ` [PATCH v2 17/18] sunrpc: skip svc_xprt_enqueue in svc_xprt_received when idle Chuck Lever
2026-02-27 14:03 ` [PATCH v2 18/18] sunrpc: Skip xpt_reserved accounting for non-UDP transports Chuck Lever
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260227140345.40488-17-cel@kernel.org \
--to=cel@kernel.org \
--cc=chuck.lever@oracle.com \
--cc=dai.ngo@oracle.com \
--cc=jlayton@kernel.org \
--cc=linux-nfs@vger.kernel.org \
--cc=neilb@ownmail.net \
--cc=okorniev@redhat.com \
--cc=tom@talpey.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox