From: Chuck Lever <cel@kernel.org>
To: NeilBrown <neilb@ownmail.net>, Jeff Layton <jlayton@kernel.org>,
Olga Kornievskaia <okorniev@redhat.com>,
Dai Ngo <dai.ngo@oracle.com>, Tom Talpey <tom@talpey.com>
Cc: <linux-nfs@vger.kernel.org>, Chuck Lever <chuck.lever@oracle.com>
Subject: [PATCH v2 02/18] svcrdma: Clean up use of rdma->sc_pd->device in Receive paths
Date: Fri, 27 Feb 2026 09:03:29 -0500 [thread overview]
Message-ID: <20260227140345.40488-3-cel@kernel.org> (raw)
In-Reply-To: <20260227140345.40488-1-cel@kernel.org>
From: Chuck Lever <chuck.lever@oracle.com>
I can't think of a reason why svcrdma is using the PD's device. Most
other consumers of the IB DMA API use the ib_device pointer from the
connection's rdma_cm_id.
I don't believe there's any functional difference between the two,
but it is a little confusing to see some uses of rdma_cm_id->device
and some of ib_pd->device.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
---
net/sunrpc/xprtrdma/svc_rdma_recvfrom.c | 13 +++++++------
1 file changed, 7 insertions(+), 6 deletions(-)
diff --git a/net/sunrpc/xprtrdma/svc_rdma_recvfrom.c b/net/sunrpc/xprtrdma/svc_rdma_recvfrom.c
index e7e4a39ca6c6..0b388d324c4f 100644
--- a/net/sunrpc/xprtrdma/svc_rdma_recvfrom.c
+++ b/net/sunrpc/xprtrdma/svc_rdma_recvfrom.c
@@ -118,7 +118,8 @@ svc_rdma_next_recv_ctxt(struct list_head *list)
static struct svc_rdma_recv_ctxt *
svc_rdma_recv_ctxt_alloc(struct svcxprt_rdma *rdma)
{
- int node = ibdev_to_node(rdma->sc_cm_id->device);
+ struct ib_device *device = rdma->sc_cm_id->device;
+ int node = ibdev_to_node(device);
struct svc_rdma_recv_ctxt *ctxt;
unsigned long pages;
dma_addr_t addr;
@@ -133,9 +134,9 @@ svc_rdma_recv_ctxt_alloc(struct svcxprt_rdma *rdma)
buffer = kmalloc_node(rdma->sc_max_req_size, GFP_KERNEL, node);
if (!buffer)
goto fail1;
- addr = ib_dma_map_single(rdma->sc_pd->device, buffer,
- rdma->sc_max_req_size, DMA_FROM_DEVICE);
- if (ib_dma_mapping_error(rdma->sc_pd->device, addr))
+ addr = ib_dma_map_single(device, buffer, rdma->sc_max_req_size,
+ DMA_FROM_DEVICE);
+ if (ib_dma_mapping_error(device, addr))
goto fail2;
svc_rdma_recv_cid_init(rdma, &ctxt->rc_cid);
@@ -167,7 +168,7 @@ svc_rdma_recv_ctxt_alloc(struct svcxprt_rdma *rdma)
static void svc_rdma_recv_ctxt_destroy(struct svcxprt_rdma *rdma,
struct svc_rdma_recv_ctxt *ctxt)
{
- ib_dma_unmap_single(rdma->sc_pd->device, ctxt->rc_recv_sge.addr,
+ ib_dma_unmap_single(rdma->sc_cm_id->device, ctxt->rc_recv_sge.addr,
ctxt->rc_recv_sge.length, DMA_FROM_DEVICE);
kfree(ctxt->rc_recv_buf);
kfree(ctxt);
@@ -962,7 +963,7 @@ int svc_rdma_recvfrom(struct svc_rqst *rqstp)
return 0;
percpu_counter_inc(&svcrdma_stat_recv);
- ib_dma_sync_single_for_cpu(rdma_xprt->sc_pd->device,
+ ib_dma_sync_single_for_cpu(rdma_xprt->sc_cm_id->device,
ctxt->rc_recv_sge.addr, ctxt->rc_byte_len,
DMA_FROM_DEVICE);
svc_rdma_build_arg_xdr(rqstp, ctxt);
--
2.53.0
next prev parent reply other threads:[~2026-02-27 14:03 UTC|newest]
Thread overview: 19+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-02-27 14:03 [PATCH v2 00/18] svcrdma performance scalability enhancements Chuck Lever
2026-02-27 14:03 ` [PATCH v2 01/18] svcrdma: Add fair queuing for Send Queue access Chuck Lever
2026-02-27 14:03 ` Chuck Lever [this message]
2026-02-27 14:03 ` [PATCH v2 03/18] svcrdma: Clean up use of rdma->sc_pd->device Chuck Lever
2026-02-27 14:03 ` [PATCH v2 04/18] svcrdma: Add Write chunk WRs to the RPC's Send WR chain Chuck Lever
2026-02-27 14:03 ` [PATCH v2 05/18] svcrdma: Factor out WR chain linking into helper Chuck Lever
2026-02-27 14:03 ` [PATCH v2 06/18] svcrdma: Reduce false sharing in struct svcxprt_rdma Chuck Lever
2026-02-27 14:03 ` [PATCH v2 07/18] svcrdma: Use lock-free list for Receive Queue tracking Chuck Lever
2026-02-27 14:03 ` [PATCH v2 08/18] svcrdma: Convert Read completion queue to use lock-free list Chuck Lever
2026-02-27 14:03 ` [PATCH v2 09/18] svcrdma: Release write chunk resources without re-queuing Chuck Lever
2026-02-27 14:03 ` [PATCH v2 10/18] svcrdma: Defer send context release to xpo_release_ctxt Chuck Lever
2026-02-27 14:03 ` [PATCH v2 11/18] svcrdma: Use watermark-based Receive Queue replenishment Chuck Lever
2026-02-27 14:03 ` [PATCH v2 12/18] svcrdma: Add per-recv_ctxt chunk context cache Chuck Lever
2026-02-27 14:03 ` [PATCH v2 13/18] svcrdma: clear XPT_DATA on sc_read_complete_q consumption Chuck Lever
2026-02-27 14:03 ` [PATCH v2 14/18] svcrdma: retry when receive queues drain transiently Chuck Lever
2026-02-27 14:03 ` [PATCH v2 15/18] svcrdma: clear XPT_DATA on sc_rq_dto_q consumption Chuck Lever
2026-02-27 14:03 ` [PATCH v2 16/18] sunrpc: skip svc_xprt_enqueue when no work is pending Chuck Lever
2026-02-27 14:03 ` [PATCH v2 17/18] sunrpc: skip svc_xprt_enqueue in svc_xprt_received when idle Chuck Lever
2026-02-27 14:03 ` [PATCH v2 18/18] sunrpc: Skip xpt_reserved accounting for non-UDP transports Chuck Lever
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260227140345.40488-3-cel@kernel.org \
--to=cel@kernel.org \
--cc=chuck.lever@oracle.com \
--cc=dai.ngo@oracle.com \
--cc=jlayton@kernel.org \
--cc=linux-nfs@vger.kernel.org \
--cc=neilb@ownmail.net \
--cc=okorniev@redhat.com \
--cc=tom@talpey.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox