From: Mike Snitzer <snitzer@kernel.org>
To: Anna Schumaker <anna@kernel.org>, Trond Myklebust <trondmy@kernel.org>
Cc: Mike Snitzer <snitzer@hammerspace.com>,
linux-nfs@vger.kernel.org,
Jonathan Flynn <jonathan.flynn@hammerspace.com>
Subject: [PATCH v3 10/12] NFSv4/flexfiles: rotate LAYOUTSTATS reporting across a mirror's stripes
Date: Fri, 6 Nov 2026 13:20:58 -0500 [thread overview]
Message-ID: <20261106182105.78611-11-snitzer@kernel.org> (raw)
In-Reply-To: <20261106182105.78611-1-snitzer@kernel.org>
From: Mike Snitzer <snitzer@hammerspace.com>
Both callers of ff_layout_mirror_prepare_stats() limit a report to four
ff_layoutupdate4 entries, and the scan of mirror->dss[] stops when the
limit is reached. On a mirror with more than four busy stripes, every
report contains the same four stripes, and the others are reported only
at LAYOUTRETURN.
Record where each mirror's scan stopped, and start the next scan there.
The index moves past each stripe that gets a slot, and idle stripes do
not use a slot. So every busy stripe is reported within
ceil(busy_stripes / 4) report intervals. The values and the encoding
do not change.
The mirror loop gets the same dev_limit test as the stripe loop, so a
full report stops the scan.
[jonathan.flynn: read dss_report_index once per mirror, before the
stripe loop. Reading it again in the loop skipped stripes and could
report one stripe twice.]
Signed-off-by: Jonathan Flynn <jonathan.flynn@hammerspace.com>
Signed-off-by: Mike Snitzer <snitzer@hammerspace.com>
---
fs/nfs/flexfilelayout/flexfilelayout.c | 15 ++++++++++++---
fs/nfs/flexfilelayout/flexfilelayout.h | 1 +
2 files changed, 13 insertions(+), 3 deletions(-)
diff --git a/fs/nfs/flexfilelayout/flexfilelayout.c b/fs/nfs/flexfilelayout/flexfilelayout.c
index 4f27b1ea8b621..5c61d32a7cbde 100644
--- a/fs/nfs/flexfilelayout/flexfilelayout.c
+++ b/fs/nfs/flexfilelayout/flexfilelayout.c
@@ -3136,14 +3136,21 @@ ff_layout_mirror_prepare_stats(struct pnfs_layout_hdr *lo,
struct nfs4_ff_layout_ds_stripe *dss_info;
struct nfs4_ff_layout_ds *mirror_ds;
__u64 read_count, read_bytes, write_count, write_bytes, ops;
- int i = 0, dss_id;
+ u32 dss_id, scanned, base;
+ int i = 0;
rcu_read_lock();
list_for_each_entry(mirror, &ff_layout->mirrors, mirrors) {
- for (dss_id = 0; dss_id < mirror->dss_count; ++dss_id) {
- dss_info = &mirror->dss[dss_id];
+ if (i >= dev_limit)
+ break;
+ base = mirror->dss_report_index;
+ for (scanned = 0; scanned < mirror->dss_count; ++scanned) {
if (i >= dev_limit)
break;
+ dss_id = base + scanned;
+ if (dss_id >= mirror->dss_count)
+ dss_id -= mirror->dss_count;
+ dss_info = &mirror->dss[dss_id];
mirror_ds = rcu_dereference(dss_info->mirror_ds);
if (IS_ERR_OR_NULL(mirror_ds))
continue;
@@ -3167,6 +3174,8 @@ ff_layout_mirror_prepare_stats(struct pnfs_layout_hdr *lo,
if (!refcount_inc_not_zero(&mirror->ref))
continue;
dss_info->last_reported_ops = ops;
+ mirror->dss_report_index =
+ dss_id + 1 < mirror->dss_count ? dss_id + 1 : 0;
/* The pin holds a reference; it is exchanged out only
* under i_lock. Put in ff_layout_free_layoutstats().
*/
diff --git a/fs/nfs/flexfilelayout/flexfilelayout.h b/fs/nfs/flexfilelayout/flexfilelayout.h
index 69dfdcfb9664d..a08b08f33ad84 100644
--- a/fs/nfs/flexfilelayout/flexfilelayout.h
+++ b/fs/nfs/flexfilelayout/flexfilelayout.h
@@ -108,6 +108,7 @@ struct nfs4_ff_layout_mirror {
struct nfs4_ff_layout_ds_stripe *dss;
refcount_t ref;
u32 report_interval;
+ u32 dss_report_index;
};
struct nfs4_ff_layout_segment {
--
2.52.0
next prev parent reply other threads:[~2026-11-06 18:21 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-11-06 18:20 [PATCH v3 00/12] NFSv4/flexfiles: scale layoutstats for striped layouts Mike Snitzer
2026-11-06 18:20 ` [PATCH v3 01/12] NFSv4/flexfiles: move layoutstats accounting to a per-stripe lock Mike Snitzer
2026-11-06 18:20 ` [PATCH v3 02/12] NFSv4/flexfiles: drop the now-unused per-mirror lock Mike Snitzer
2026-11-06 18:20 ` [PATCH v3 03/12] NFSv4/flexfiles: cacheline align the per-stripe layoutstats Mike Snitzer
2026-11-06 18:20 ` [PATCH v3 04/12] NFSv4/flexfiles: make dss_info->start_time write-once Mike Snitzer
2026-11-06 18:20 ` [PATCH v3 05/12] NFSv4/flexfiles: drop the redundant atomic from the busy timer Mike Snitzer
2026-11-06 18:20 ` [PATCH v3 06/12] NFSv4/flexfiles: pair the in-flight count with the layoutstats updates Mike Snitzer
2026-11-06 18:20 ` [PATCH v3 07/12] NFSv4/flexfiles: derive ffil_ops_requested rather than storing it Mike Snitzer
2026-11-06 18:20 ` [PATCH v3 08/12] NFSv4/flexfiles: give each direction its own lock and cacheline Mike Snitzer
2026-11-06 18:20 ` [PATCH v3 09/12] NFSv4/flexfiles: drop NFS4_FF_MIRROR_STAT_AVAIL Mike Snitzer
2026-11-06 18:20 ` Mike Snitzer [this message]
2026-11-06 18:20 ` [PATCH v3 11/12] NFSv4/flexfiles: take the report decision out of the critical section Mike Snitzer
2026-11-06 18:21 ` [PATCH v3 12/12] NFSv4/flexfiles: share one helper for the start of a read and a write Mike Snitzer
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20261106182105.78611-11-snitzer@kernel.org \
--to=snitzer@kernel.org \
--cc=anna@kernel.org \
--cc=jonathan.flynn@hammerspace.com \
--cc=linux-nfs@vger.kernel.org \
--cc=snitzer@hammerspace.com \
--cc=trondmy@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox