Re: Slow file transfer speeds with CFQ IO scheduler in some cases

[Vladislav Bolkhovitin <vst-d+Crzxg7Rs0@public.gmane.org>]

[-- Attachment #1: Type: text/plain, Size: 2983 bytes --]

Wu Fengguang, on 02/13/2009 04:57 AM wrote:
> On Thu, Feb 12, 2009 at 09:35:18PM +0300, Vladislav Bolkhovitin wrote:
>> Sorry for such a huge delay. There were many other activities I had to  
>> do before + I had to be sure I didn't miss anything.
>>
>> We didn't use NFS, we used SCST (http://scst.sourceforge.net) with  
>> iSCSI-SCST target driver. It has similar to NFS architecture, where N  
>> threads (N=5 in this case) handle IO from remote initiators (clients)  
>> coming from wire using iSCSI protocol. In addition, SCST has patch  
>> called export_alloc_io_context (see  
>> http://lkml.org/lkml/2008/12/10/282), which allows for the IO threads  
>> queue IO using single IO context, so we can see if context RA can  
>> replace grouping IO threads in single IO context.
>>
>> Unfortunately, the results are negative. We find neither any advantages  
>> of context RA over current RA implementation, nor possibility for  
>> context RA to replace grouping IO threads in single IO context.
>>
>> Setup on the target (server) was the following. 2 SATA drives grouped in  
>> md RAID-0 with average local read throughput ~120MB/s ("dd if=/dev/zero  
>> of=/dev/md0 bs=1M count=20000" outputs "20971520000 bytes (21 GB)  
>> copied, 177,742 s, 118 MB/s"). The md device was partitioned on 3  
>> partitions. The first partition was 10% of space in the beginning of the  
>> device, the last partition was 10% of space in the end of the device,  
>> the middle one was the rest in the middle of the space them. Then the  
>> first and the last partitions were exported to the initiator (client).  
>> They were /dev/sdb and /dev/sdc on it correspondingly.
> 
> Vladislav, Thank you for the benchmarks! I'm very interested in
> optimizing your workload and figuring out what happens underneath.
> 
> Are the client and server two standalone boxes connected by GBE?
> 
> When you set readahead sizes in the benchmarks, you are setting them
> in the server side? I.e. "linux-4dtq" is the SCST server? What's the
> client side readahead size?
> 
> It would help a lot to debug readahead if you can provide the
> server side readahead stats and trace log for the worst case.
> This will automatically answer the above questions as well as disclose
> the micro-behavior of readahead:
> 
>         mount -t debugfs none /sys/kernel/debug
> 
>         echo > /sys/kernel/debug/readahead/stats # reset counters
>         # do benchmark
>         cat /sys/kernel/debug/readahead/stats
> 
>         echo 1 > /sys/kernel/debug/readahead/trace_enable
>         # do micro-benchmark, i.e. run the same benchmark for a short time
>         echo 0 > /sys/kernel/debug/readahead/trace_enable
>         dmesg
> 
> The above readahead trace should help find out how the client side
> sequential reads convert into server side random reads, and how we can
> prevent that.

See attached. Could you comment the logs, please, so I will also be able 
to read them in the future?

Thank you,
Vlad


[-- Attachment #2: RA-debug.zip --]
[-- Type: application/zip, Size: 18593 bytes --]