* Re: PROBLEM: nfsd crashes in 2.6.29
[not found] ` <49D218C8.2040503-tUP8e6pgWdNlY7y4Fx5NiA@public.gmane.org>
@ 2009-04-01 18:57 ` J. Bruce Fields
[not found] ` <20090402105943.14031ff3mhfka6bk@ssl.msconsult.dk>
0 siblings, 1 reply; 4+ messages in thread
From: J. Bruce Fields @ 2009-04-01 18:57 UTC (permalink / raw)
To: Rasmus Bøg Hansen; +Cc: linux-nfs, David Howells
Skipping ahead to the first oops:
> BUG: unable to handle kernel NULL pointer dereference at 00000004
> IP: [<c022f288>] inode_has_perm+0x1f/0x69
Without trying to figure out where that is, just looking at the
offset... That would be consistent with current_cred()->security being
NULL, since the cred_sid(cred) in inode_has_perm does tsec->sid, where
tsec is
struct task_security_struct {
u32 osid;
u32 sid;
...
}
(Could ->security be unset for an nfsd thread?)
In a hurry and just grasping at straws here....
--b.
> *pdpt =3D 0000000015a0e001 *pde =3D 0000000000000000=20
> Oops: 0000 [#1] SMP=20
> last sysfs file: /sys/devices/pci0000:00/0000:00:1f.3/i2c-adapter/i2c=
-0/0-002e/temp3_alarm
> Modules linked in: parport_pc lp parport autofs4 microcode nfsd expor=
tfs nfs lockd nfs_acl sunrpc fuse
>=20
> Pid: 2604, comm: nfsd Not tainted (2.6.29 #2) =20
> EIP: 0060:[<c022f288>] EFLAGS: 00010246 CPU: 0
> EIP is at inode_has_perm+0x1f/0x69
> EAX: 00000000 EBX: 00000000 ECX: 00000004 EDX: cd45fd30
> ESI: df3aa280 EDI: cd45fd30 EBP: df3aa280 ESP: dac6fe24
> DS: 007b ES: 007b FS: 00d8 GS: 0000 SS: 0068
> Process nfsd (pid: 2604, ti=3Ddac6f000 task=3Ddf36c6e0 task.ti=3Ddac6=
f000)
> Stack:
> 00000020 00000018 00000004 d597dd6c dac59000 c0166888 d597dd00 df3aa=
2ec
> d597dd6c c0231e95 c046cfa0 00000246 00000042 e08c393a df7e1dd0 c5646=
480
> 00000000 00000004 d59bdf00 cd45fd30 df3aa280 c0231f5a 00000000 00000=
001
> Call Trace:
> [<c0166888>] kmemdup+0x16/0x30
> [<c0231e95>] selinux_cred_prepare+0x10/0x22
> [<e08c393a>] nfsd_permission+0x88/0xf2 [nfsd]
> [<c0231f5a>] selinux_dentry_open+0xb3/0xe5
> [<c022a769>] security_dentry_open+0xc/0xd
> [<c017bf5e>] __dentry_open+0x9f/0x23a
> [<c017c130>] dentry_open+0x37/0x7f
> [<e08c5035>] nfsd_open+0xe6/0x14e [nfsd]
> [<e08c52d4>] nfsd_commit+0x34/0x91 [nfsd]
> [<e07ffee6>] cache_check+0x2b/0x3f6 [sunrpc]
> [<e08cae07>] nfsd3_proc_commit+0x94/0x10f [nfsd]
> [<e07fbc8c>] svcauth_unix_accept+0x1c1/0x273 [sunrpc]
> [<e08c01d3>] nfsd_dispatch+0x97/0x209 [nfsd]
> [<e07f8b04>] svc_process+0x3e8/0x707 [sunrpc]
> [<c01035a7>] common_interrupt+0x27/0x2c
> [<e08c0829>] nfsd+0x16c/0x26a [nfsd]
> [<c011b198>] complete+0x37/0x46
> [<e08c06bd>] nfsd+0x0/0x26a [nfsd]
> [<c0136376>] kthread+0x39/0x62
> [<c013633d>] kthread+0x0/0x62
> [<c010380b>] kernel_thread_helper+0x7/0x1c
> Code: 00 e8 f4 e4 ff ff 83 c4 08 5b 5e c3 55 57 56 53 83 ec 44 89 c6 =
89 4c 24 08 8b 5c 24 58 31 c0 f6 82 39 01 00 00 02 75 29 8b 46 58 <8b> =
68 04 8b b2 40 01 00 00 85 db 74 21 0f b7 4e 14 8b 56 10 89=20
> EIP: [<c022f288>] inode_has_perm+0x1f/0x69 SS:ESP 0068:dac6fe24
> ---[ end trace 2545eed1715071f5 ]---
On Tue, Mar 31, 2009 at 03:21:12PM +0200, Rasmus B=C3=B8g Hansen wrote:
> Dear NFS maintainers
>
> I upgraded to 2.6.29 and after some time nfsd crashed. It had been =20
> running for about 4 hours without trouble with just one NFS client (i=
t =20
> never has more).
>
> The server had much disk activity under the crash but little NFS-rela=
ted =20
> activity. It is running Debian Lenny and is otherwise extremly stable=
=2E =20
> It is currently running 2.6.28.8 (which is what I tried to upgrade fr=
om).
>
> moffe@gere:~/software/kernel/linux-2.6.29# sh scripts/ver_linux
> If some fields are empty or look unusual you may have an old version.
> Compare to the current minimal requirements in Documentation/Changes.
>
> Linux gere 2.6.28.8 #1 SMP Tue Mar 17 07:53:42 CET 2009 i686 GNU/Linu=
x
>
> Gnu C 4.3.2
> Gnu make 3.81
> binutils 2.18.0.20080103
> util-linux 2.13.1.1
> mount 2.13.1.1
> module-init-tools found
> Linux C Library 2.7
> Dynamic linker (ldd) 2.7
> Procps 3.2.7
> Kbd [tilvalg...]
> Console-tools 0.2.3
> Sh-utils 6.10
> Modules Loaded parport_pc lp parport autofs4 microcode nfsd =20
> exportfs nfs lockd nfs_acl sunrpc fuse lm85 hwmon_vid hwmon i2c_i801 =
=20
> i2c_core ipv6
>
> The 2.6.28.8 and 2.6.29 are slightly differently configured - 2.6.29 =
has =20
> support for the EDAC controller in kernel (CONFIG_EDAC_I82875P=3Dy - =
=20
> absent in 2.6.28.8) and i2c_i801, lm85, hwmon, hwmon_vid, i2c_core an=
d =20
> ipv6 in kernel (rather than as modules).
>
> The CPU is a pentium 4 with hyperthreading:
>
> root@gere:~# cat /proc/cpuinfo
> processor : 0
> vendor_id : GenuineIntel
> cpu family : 15
> model : 3
> model name : Intel(R) Pentium(R) 4 CPU 2.80GHz
> stepping : 3
> cpu MHz : 2792.992
> cache size : 1024 KB
> physical id : 0
> siblings : 2
> core id : 0
> cpu cores : 1
> apicid : 0
> initial apicid : 0
> fdiv_bug : no
> hlt_bug : no
> f00f_bug : no
> coma_bug : no
> fpu : yes
> fpu_exception : yes
> cpuid level : 5
> wp : yes
> flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge m=
ca =20
> cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe =20
> constant_tsc pebs bts pni dtes64 monitor ds_cpl cid
> bogomips : 5585.98
> clflush size : 64
> power management:
>
> processor : 1
> vendor_id : GenuineIntel
> cpu family : 15
> model : 3
> model name : Intel(R) Pentium(R) 4 CPU 2.80GHz
> stepping : 3
> cpu MHz : 2792.992
> cache size : 1024 KB
> physical id : 0
> siblings : 2
> core id : 0
> cpu cores : 1
> apicid : 1
> initial apicid : 1
> fdiv_bug : no
> hlt_bug : no
> f00f_bug : no
> coma_bug : no
> fpu : yes
> fpu_exception : yes
> cpuid level : 5
> wp : yes
> flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge m=
ca =20
> cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe =20
> constant_tsc pebs bts pni dtes64 monitor ds_cpl cid
> bogomips : 5586.09
> clflush size : 64
> power management:
>
> which means the the system runs SMP.
>
> root@gere:~# lspci -vvv
> 00:00.0 Host bridge: Intel Corporation 82875P/E7210 Memory Controller=
=20
> Hub (rev 02)
> Subsystem: Intel Corporation 82875P/E7210 Memory Controller Hub
> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr=
- =20
> Stepping- SERR+ FastB2B- DisINTx-
> Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=3Dfast >TAbort- =20
> <TAbort- <MAbort+ >SERR- <PERR- INTx-
> Latency: 0
> Region 0: Memory at f8000000 (32-bit, prefetchable) [size=3D64M]
> Capabilities: [e4] Vendor Specific Information <?>
> Capabilities: [a0] AGP version 3.0
> Status: RQ=3D32 Iso- ArqSz=3D2 Cal=3D0 SBA+ ITACoh- GART64- HT=
rans- =20
> 64bit- FW+ AGP3- Rate=3Dx1,x2,x4
> Command: RQ=3D1 ArqSz=3D0 Cal=3D0 SBA- AGP- GART64- 64bit- FW-=
Rate=3D<none>
> Kernel driver in use: i82875p_edac
> Kernel modules: intel-agp
>
> 00:01.0 PCI bridge: Intel Corporation 82875P Processor to AGP Control=
ler =20
> (rev 02) (prog-if 00 [Normal decode])
> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr=
- =20
> Stepping- SERR+ FastB2B- DisINTx-
> Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=3Dfast >TAbort- =20
> <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 32
> Bus: primary=3D00, secondary=3D01, subordinate=3D01, sec-latency=3D=
32
> I/O behind bridge: 0000f000-00000fff
> Memory behind bridge: fff00000-000fffff
> Prefetchable memory behind bridge: fff00000-000fffff
> Secondary status: 66MHz+ FastB2B+ ParErr- DEVSEL=3Dmedium >TAbort-=
=20
> <TAbort- <MAbort+ <SERR- <PERR-
> BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
> PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
>
> 00:03.0 PCI bridge: Intel Corporation 82875P/E7210 Processor to PCI t=
o =20
> CSA Bridge (rev 02) (prog-if 00 [Normal decode])
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr=
- =20
> Stepping- SERR+ FastB2B- DisINTx-
> Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=3Dfast >TAbort- =20
> <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 32
> Bus: primary=3D00, secondary=3D02, subordinate=3D02, sec-latency=3D=
0
> I/O behind bridge: 00009000-00009fff
> Memory behind bridge: fc800000-fc8fffff
> Prefetchable memory behind bridge: fff00000-000fffff
> Secondary status: 66MHz+ FastB2B+ ParErr- DEVSEL=3Dmedium >TAbort-=
=20
> <TAbort- <MAbort- <SERR- <PERR-
> BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
> PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
>
> 00:06.0 System peripheral: Intel Corporation 82875P/E7210 Processor t=
o =20
> I/O Memory Interface (rev 02)
> Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr=
- =20
> Stepping- SERR- FastB2B- DisINTx-
> Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=3Dfast >TAbort- =20
> <TAbort- <MAbort- >SERR- <PERR- INTx-
> Region 0: Memory at 30101000 (32-bit, non-prefetchable) [size=3D4K=
]
>
> 00:1d.0 USB Controller: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB=
=20
> UHCI Controller #1 (rev 02) (prog-if 00 [UHCI])
> Subsystem: Intel Corporation Device 3428
> Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr=
- =20
> Stepping- SERR- FastB2B- DisINTx-
> Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=3Dmedium >TAbort-=
=20
> <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 0
> Interrupt: pin A routed to IRQ 5
> Region 4: I/O ports at cc00 [size=3D32]
> Kernel modules: uhci-hcd
>
> 00:1d.1 USB Controller: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB=
=20
> UHCI Controller #2 (rev 02) (prog-if 00 [UHCI])
> Subsystem: Intel Corporation Device 3428
> Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr=
- =20
> Stepping- SERR- FastB2B- DisINTx-
> Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=3Dmedium >TAbort-=
=20
> <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 0
> Interrupt: pin B routed to IRQ 9
> Region 4: I/O ports at d000 [size=3D32]
> Kernel modules: uhci-hcd
>
> 00:1d.2 USB Controller: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB=
=20
> UHCI Controller #3 (rev 02) (prog-if 00 [UHCI])
> Subsystem: Intel Corporation Device 3428
> Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr=
- =20
> Stepping- SERR- FastB2B- DisINTx-
> Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=3Dmedium >TAbort-=
=20
> <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 0
> Interrupt: pin C routed to IRQ 10
> Region 4: I/O ports at d400 [size=3D32]
> Kernel modules: uhci-hcd
>
> 00:1d.3 USB Controller: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB=
=20
> UHCI Controller #4 (rev 02) (prog-if 00 [UHCI])
> Subsystem: Intel Corporation Device 3428
> Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr=
- =20
> Stepping- SERR- FastB2B- DisINTx-
> Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=3Dmedium >TAbort-=
=20
> <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 0
> Interrupt: pin A routed to IRQ 5
> Region 4: I/O ports at d800 [size=3D32]
> Kernel modules: uhci-hcd
>
> 00:1d.7 USB Controller: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB=
2 =20
> EHCI Controller (rev 02) (prog-if 20 [EHCI])
> Subsystem: Intel Corporation Device 3428
> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr=
- =20
> Stepping- SERR+ FastB2B- DisINTx-
> Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=3Dmedium >TAbort-=
=20
> <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 0
> Interrupt: pin D routed to IRQ 9
> Region 0: Memory at febffc00 (32-bit, non-prefetchable) [size=3D1K=
]
> Capabilities: [50] Power Management version 2
> Flags: PMEClk- DSI- D1- D2- AuxCurrent=3D375mA =20
> PME(D0+,D1-,D2-,D3hot+,D3cold+)
> Status: D0 PME-Enable- DSel=3D0 DScale=3D0 PME-
> Capabilities: [58] Debug port: BAR=3D1 offset=3D00a0
> Kernel modules: ehci-hcd
>
> 00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev c2) (prog=
-if =20
> 00 [Normal decode])
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr=
- =20
> Stepping- SERR+ FastB2B- DisINTx-
> Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=3Dfast >TAbort- =20
> <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 0
> Bus: primary=3D00, secondary=3D03, subordinate=3D03, sec-latency=3D=
32
> I/O behind bridge: 0000a000-0000bfff
> Memory behind bridge: fc900000-feafffff
> Prefetchable memory behind bridge: 30000000-300fffff
> Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=3Dmedium >TAbort-=
=20
> <TAbort- <MAbort- <SERR- <PERR-
> BridgeCtl: Parity- SERR+ NoISA- VGA+ MAbort- >Reset- FastB2B-
> PriDiscTmr- SecDiscTmr+ DiscTmrStat- DiscTmrSERREn-
>
> 00:1f.0 ISA bridge: Intel Corporation 82801EB/ER (ICH5/ICH5R) LPC =20
> Interface Bridge (rev 02)
> Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr=
- =20
> Stepping- SERR+ FastB2B- DisINTx-
> Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=3Dmedium >TAbort-=
=20
> <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 0
>
> 00:1f.1 IDE interface: Intel Corporation 82801EB/ER (ICH5/ICH5R) IDE =
=20
> Controller (rev 02) (prog-if 8a [Master SecP PriP])
> Subsystem: Intel Corporation Device 3428
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr=
- =20
> Stepping- SERR- FastB2B- DisINTx-
> Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=3Dmedium >TAbort-=
=20
> <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 0
> Interrupt: pin A routed to IRQ 18
> Region 0: I/O ports at 01f0 [size=3D8]
> Region 1: I/O ports at 03f4 [size=3D1]
> Region 2: I/O ports at 0170 [size=3D8]
> Region 3: I/O ports at 0374 [size=3D1]
> Region 4: I/O ports at ffa0 [size=3D16]
> Region 5: Memory at 30100000 (32-bit, non-prefetchable) [size=3D1K=
]
> Kernel driver in use: ata_piix
>
> 00:1f.2 IDE interface: Intel Corporation 82801EB (ICH5) SATA Controll=
er =20
> (rev 02) (prog-if 8f [Master SecP SecO PriP PriO])
> Subsystem: Intel Corporation Device 3428
> Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr=
- =20
> Stepping- SERR- FastB2B- DisINTx-
> Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=3Dmedium >TAbort-=
=20
> <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 0
> Interrupt: pin A routed to IRQ 18
> Region 0: I/O ports at ec00 [size=3D8]
> Region 1: I/O ports at e800 [size=3D4]
> Region 2: I/O ports at e400 [size=3D8]
> Region 3: I/O ports at e000 [size=3D4]
> Region 4: I/O ports at dc00 [size=3D16]
> Kernel driver in use: ata_piix
>
> 00:1f.3 SMBus: Intel Corporation 82801EB/ER (ICH5/ICH5R) SMBus =20
> Controller (rev 02)
> Subsystem: Intel Corporation Device 3428
> Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr=
- =20
> Stepping- SERR- FastB2B- DisINTx-
> Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=3Dmedium >TAbort-=
=20
> <TAbort- <MAbort- >SERR- <PERR- INTx-
> Interrupt: pin B routed to IRQ 17
> Region 4: I/O ports at c800 [size=3D32]
> Kernel driver in use: i801_smbus
> Kernel modules: i2c-i801
>
> 02:01.0 Ethernet controller: Intel Corporation 82547EI Gigabit Ethern=
et =20
> Controller
> Subsystem: Intel Corporation Device 3428
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr=
- =20
> Stepping- SERR- FastB2B- DisINTx-
> Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=3Dmedium >TAbort-=
=20
> <TAbort- <MAbort- >SERR- <PERR- INTx+
> Latency: 0 (63750ns min), Cache Line Size: 64 bytes
> Interrupt: pin A routed to IRQ 18
> Region 0: Memory at fc8e0000 (32-bit, non-prefetchable) [size=3D12=
8K]
> Region 2: I/O ports at 9c00 [size=3D32]
> Capabilities: [dc] Power Management version 2
> Flags: PMEClk- DSI+ D1- D2- AuxCurrent=3D0mA =20
> PME(D0+,D1-,D2-,D3hot+,D3cold+)
> Status: D0 PME-Enable- DSel=3D0 DScale=3D1 PME-
> Kernel driver in use: e1000
>
> 03:01.0 RAID bus controller: Silicon Image, Inc. Adaptec AAR-1210SA S=
ATA =20
> HostRAID Controller (rev 02) (prog-if 01)
> Subsystem: Adaptec Device 0240
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr=
- =20
> Stepping- SERR+ FastB2B- DisINTx-
> Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=3Dmedium >TAbort-=
=20
> <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 32, Cache Line Size: 64 bytes
> Interrupt: pin A routed to IRQ 22
> Region 0: I/O ports at bc00 [size=3D8]
> Region 1: I/O ports at b400 [size=3D4]
> Region 2: I/O ports at b000 [size=3D8]
> Region 3: I/O ports at ac00 [size=3D4]
> Region 4: I/O ports at a800 [size=3D16]
> Region 5: Memory at feafec00 (32-bit, non-prefetchable) [size=3D51=
2]
> Expansion ROM at 30000000 [disabled] [size=3D512K]
> Capabilities: [60] Power Management version 2
> Flags: PMEClk- DSI+ D1+ D2+ AuxCurrent=3D0mA =20
> PME(D0-,D1-,D2-,D3hot-,D3cold-)
> Status: D0 PME-Enable- DSel=3D0 DScale=3D2 PME-
> Kernel driver in use: sata_sil
>
> 03:06.0 VGA compatible controller: ATI Technologies Inc Rage XL (rev =
27) =20
> (prog-if 00 [VGA controller])
> Subsystem: Intel Corporation Device 3428
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr=
- =20
> Stepping+ SERR- FastB2B- DisINTx-
> Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=3Dmedium >TAbort-=
=20
> <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 32 (2000ns min), Cache Line Size: 64 bytes
> Interrupt: pin A routed to IRQ 11
> Region 0: Memory at fd000000 (32-bit, non-prefetchable) [size=3D16=
M]
> Region 1: I/O ports at b800 [size=3D256]
> Region 2: Memory at feaff000 (32-bit, non-prefetchable) [size=3D4K=
]
> Expansion ROM at 30080000 [disabled] [size=3D128K]
> Capabilities: [5c] Power Management version 2
> Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=3D0mA =20
> PME(D0-,D1-,D2-,D3hot-,D3cold-)
> Status: D0 PME-Enable- DSel=3D0 DScale=3D0 PME-
>
> 03:08.0 Ethernet controller: Intel Corporation 82562EZ 10/100 Etherne=
t =20
> Controller (rev 01)
> Subsystem: Intel Corporation Device 3428
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr=
- =20
> Stepping- SERR+ FastB2B- DisINTx-
> Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=3Dmedium >TAbort-=
=20
> <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 32 (2000ns min, 14000ns max), Cache Line Size: 64 bytes
> Interrupt: pin A routed to IRQ 11
> Region 0: Memory at feafd000 (32-bit, non-prefetchable) [size=3D4K=
]
> Region 1: I/O ports at a400 [size=3D64]
> Capabilities: [dc] Power Management version 2
> Flags: PMEClk- DSI+ D1+ D2+ AuxCurrent=3D0mA =20
> PME(D0+,D1+,D2+,D3hot+,D3cold+)
> Status: D0 PME-Enable- DSel=3D0 DScale=3D2 PME-
> Kernel modules: e100
>
> As dmesg indicates, the kernel has selinux enabled though it is unuse=
d.
>
> I am unsure how and where to debug but I'd sure like to help anything=
I can.
>
>
>
> Regards
> /Rasmus
>
> --=20
> Rasmus B=C3=B8g Hansen
> MSC Aps
> B=C3=B8gesvinget 8
> 2740 Skovlunde
> 44 53 93 66
>
> #
> # Automatically generated make config: don't edit
> # Linux kernel version: 2.6.29
> # Tue Mar 31 09:18:15 2009
> #
> # CONFIG_64BIT is not set
> CONFIG_X86_32=3Dy
> # CONFIG_X86_64 is not set
> CONFIG_X86=3Dy
> CONFIG_ARCH_DEFCONFIG=3D"arch/x86/configs/i386_defconfig"
> CONFIG_GENERIC_TIME=3Dy
> CONFIG_GENERIC_CMOS_UPDATE=3Dy
> CONFIG_CLOCKSOURCE_WATCHDOG=3Dy
> CONFIG_GENERIC_CLOCKEVENTS=3Dy
> CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=3Dy
> CONFIG_LOCKDEP_SUPPORT=3Dy
> CONFIG_STACKTRACE_SUPPORT=3Dy
> CONFIG_HAVE_LATENCYTOP_SUPPORT=3Dy
> CONFIG_FAST_CMPXCHG_LOCAL=3Dy
> CONFIG_MMU=3Dy
> CONFIG_ZONE_DMA=3Dy
> CONFIG_GENERIC_ISA_DMA=3Dy
> CONFIG_GENERIC_IOMAP=3Dy
> CONFIG_GENERIC_BUG=3Dy
> CONFIG_GENERIC_HWEIGHT=3Dy
> CONFIG_ARCH_MAY_HAVE_PC_FDC=3Dy
> # CONFIG_RWSEM_GENERIC_SPINLOCK is not set
> CONFIG_RWSEM_XCHGADD_ALGORITHM=3Dy
> CONFIG_ARCH_HAS_CPU_IDLE_WAIT=3Dy
> CONFIG_GENERIC_CALIBRATE_DELAY=3Dy
> # CONFIG_GENERIC_TIME_VSYSCALL is not set
> CONFIG_ARCH_HAS_CPU_RELAX=3Dy
> CONFIG_ARCH_HAS_DEFAULT_IDLE=3Dy
> CONFIG_ARCH_HAS_CACHE_LINE_SIZE=3Dy
> CONFIG_HAVE_SETUP_PER_CPU_AREA=3Dy
> # CONFIG_HAVE_CPUMASK_OF_CPU_MAP is not set
> CONFIG_ARCH_HIBERNATION_POSSIBLE=3Dy
> CONFIG_ARCH_SUSPEND_POSSIBLE=3Dy
> # CONFIG_ZONE_DMA32 is not set
> CONFIG_ARCH_POPULATES_NODE_MAP=3Dy
> # CONFIG_AUDIT_ARCH is not set
> CONFIG_ARCH_SUPPORTS_OPTIMIZED_INLINING=3Dy
> CONFIG_GENERIC_HARDIRQS=3Dy
> CONFIG_GENERIC_IRQ_PROBE=3Dy
> CONFIG_GENERIC_PENDING_IRQ=3Dy
> CONFIG_X86_SMP=3Dy
> CONFIG_USE_GENERIC_SMP_HELPERS=3Dy
> CONFIG_X86_32_SMP=3Dy
> CONFIG_X86_HT=3Dy
> CONFIG_X86_BIOS_REBOOT=3Dy
> CONFIG_X86_TRAMPOLINE=3Dy
> CONFIG_KTIME_SCALAR=3Dy
> CONFIG_DEFCONFIG_LIST=3D"/lib/modules/$UNAME_RELEASE/.config"
>=20
> #
> # General setup
> #
> CONFIG_EXPERIMENTAL=3Dy
> CONFIG_LOCK_KERNEL=3Dy
> CONFIG_INIT_ENV_ARG_LIMIT=3D32
> CONFIG_LOCALVERSION=3D""
> # CONFIG_LOCALVERSION_AUTO is not set
> CONFIG_SWAP=3Dy
> CONFIG_SYSVIPC=3Dy
> CONFIG_SYSVIPC_SYSCTL=3Dy
> # CONFIG_POSIX_MQUEUE is not set
> # CONFIG_BSD_PROCESS_ACCT is not set
> # CONFIG_TASKSTATS is not set
> CONFIG_AUDIT=3Dy
> CONFIG_AUDITSYSCALL=3Dy
> CONFIG_AUDIT_TREE=3Dy
>=20
> #
> # RCU Subsystem
> #
> CONFIG_CLASSIC_RCU=3Dy
> # CONFIG_TREE_RCU is not set
> # CONFIG_PREEMPT_RCU is not set
> # CONFIG_TREE_RCU_TRACE is not set
> # CONFIG_PREEMPT_RCU_TRACE is not set
> # CONFIG_IKCONFIG is not set
> CONFIG_LOG_BUF_SHIFT=3D15
> CONFIG_HAVE_UNSTABLE_SCHED_CLOCK=3Dy
> CONFIG_GROUP_SCHED=3Dy
> CONFIG_FAIR_GROUP_SCHED=3Dy
> CONFIG_RT_GROUP_SCHED=3Dy
> CONFIG_USER_SCHED=3Dy
> # CONFIG_CGROUP_SCHED is not set
> # CONFIG_CGROUPS is not set
> # CONFIG_SYSFS_DEPRECATED_V2 is not set
> CONFIG_RELAY=3Dy
> CONFIG_NAMESPACES=3Dy
> # CONFIG_UTS_NS is not set
> # CONFIG_IPC_NS is not set
> # CONFIG_USER_NS is not set
> # CONFIG_PID_NS is not set
> # CONFIG_NET_NS is not set
> # CONFIG_BLK_DEV_INITRD is not set
> # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
> CONFIG_SYSCTL=3Dy
> CONFIG_ANON_INODES=3Dy
> # CONFIG_EMBEDDED is not set
> CONFIG_UID16=3Dy
> CONFIG_SYSCTL_SYSCALL=3Dy
> CONFIG_KALLSYMS=3Dy
> # CONFIG_KALLSYMS_EXTRA_PASS is not set
> CONFIG_HOTPLUG=3Dy
> CONFIG_PRINTK=3Dy
> CONFIG_BUG=3Dy
> CONFIG_ELF_CORE=3Dy
> CONFIG_PCSPKR_PLATFORM=3Dy
> CONFIG_BASE_FULL=3Dy
> CONFIG_FUTEX=3Dy
> CONFIG_EPOLL=3Dy
> CONFIG_SIGNALFD=3Dy
> CONFIG_TIMERFD=3Dy
> CONFIG_EVENTFD=3Dy
> CONFIG_SHMEM=3Dy
> CONFIG_AIO=3Dy
> CONFIG_VM_EVENT_COUNTERS=3Dy
> CONFIG_PCI_QUIRKS=3Dy
> CONFIG_SLUB_DEBUG=3Dy
> # CONFIG_COMPAT_BRK is not set
> # CONFIG_SLAB is not set
> CONFIG_SLUB=3Dy
> # CONFIG_SLOB is not set
> # CONFIG_PROFILING is not set
> CONFIG_TRACEPOINTS=3Dy
> # CONFIG_MARKERS is not set
> CONFIG_HAVE_OPROFILE=3Dy
> # CONFIG_KPROBES is not set
> CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=3Dy
> CONFIG_HAVE_IOREMAP_PROT=3Dy
> CONFIG_HAVE_KPROBES=3Dy
> CONFIG_HAVE_KRETPROBES=3Dy
> CONFIG_HAVE_ARCH_TRACEHOOK=3Dy
> CONFIG_HAVE_GENERIC_DMA_COHERENT=3Dy
> CONFIG_SLABINFO=3Dy
> CONFIG_RT_MUTEXES=3Dy
> CONFIG_BASE_SMALL=3D0
> CONFIG_MODULES=3Dy
> # CONFIG_MODULE_FORCE_LOAD is not set
> CONFIG_MODULE_UNLOAD=3Dy
> # CONFIG_MODULE_FORCE_UNLOAD is not set
> # CONFIG_MODVERSIONS is not set
> # CONFIG_MODULE_SRCVERSION_ALL is not set
> CONFIG_STOP_MACHINE=3Dy
> CONFIG_BLOCK=3Dy
> # CONFIG_LBD is not set
> CONFIG_BLK_DEV_IO_TRACE=3Dy
> # CONFIG_BLK_DEV_BSG is not set
> # CONFIG_BLK_DEV_INTEGRITY is not set
>=20
> #
> # IO Schedulers
> #
> CONFIG_IOSCHED_NOOP=3Dy
> CONFIG_IOSCHED_AS=3Dy
> CONFIG_IOSCHED_DEADLINE=3Dm
> CONFIG_IOSCHED_CFQ=3Dm
> CONFIG_DEFAULT_AS=3Dy
> # CONFIG_DEFAULT_DEADLINE is not set
> # CONFIG_DEFAULT_CFQ is not set
> # CONFIG_DEFAULT_NOOP is not set
> CONFIG_DEFAULT_IOSCHED=3D"anticipatory"
> # CONFIG_FREEZER is not set
>=20
> #
> # Processor type and features
> #
> CONFIG_TICK_ONESHOT=3Dy
> CONFIG_NO_HZ=3Dy
> CONFIG_HIGH_RES_TIMERS=3Dy
> CONFIG_GENERIC_CLOCKEVENTS_BUILD=3Dy
> CONFIG_SMP=3Dy
> # CONFIG_SPARSE_IRQ is not set
> CONFIG_X86_FIND_SMP_CONFIG=3Dy
> CONFIG_X86_MPPARSE=3Dy
> CONFIG_X86_PC=3Dy
> # CONFIG_X86_ELAN is not set
> # CONFIG_X86_VOYAGER is not set
> # CONFIG_X86_GENERICARCH is not set
> # CONFIG_X86_VSMP is not set
> # CONFIG_X86_RDC321X is not set
> CONFIG_SCHED_OMIT_FRAME_POINTER=3Dy
> # CONFIG_PARAVIRT_GUEST is not set
> # CONFIG_MEMTEST is not set
> # CONFIG_M386 is not set
> # CONFIG_M486 is not set
> # CONFIG_M586 is not set
> # CONFIG_M586TSC is not set
> # CONFIG_M586MMX is not set
> # CONFIG_M686 is not set
> # CONFIG_MPENTIUMII is not set
> # CONFIG_MPENTIUMIII is not set
> # CONFIG_MPENTIUMM is not set
> CONFIG_MPENTIUM4=3Dy
> # CONFIG_MK6 is not set
> # CONFIG_MK7 is not set
> # CONFIG_MK8 is not set
> # CONFIG_MCRUSOE is not set
> # CONFIG_MEFFICEON is not set
> # CONFIG_MWINCHIPC6 is not set
> # CONFIG_MWINCHIP3D is not set
> # CONFIG_MGEODEGX1 is not set
> # CONFIG_MGEODE_LX is not set
> # CONFIG_MCYRIXIII is not set
> # CONFIG_MVIAC3_2 is not set
> # CONFIG_MVIAC7 is not set
> # CONFIG_MPSC is not set
> # CONFIG_MCORE2 is not set
> # CONFIG_GENERIC_CPU is not set
> # CONFIG_X86_GENERIC is not set
> CONFIG_X86_CPU=3Dy
> CONFIG_X86_CMPXCHG=3Dy
> CONFIG_X86_L1_CACHE_SHIFT=3D7
> CONFIG_X86_XADD=3Dy
> CONFIG_X86_WP_WORKS_OK=3Dy
> CONFIG_X86_INVLPG=3Dy
> CONFIG_X86_BSWAP=3Dy
> CONFIG_X86_POPAD_OK=3Dy
> CONFIG_X86_INTEL_USERCOPY=3Dy
> CONFIG_X86_USE_PPRO_CHECKSUM=3Dy
> CONFIG_X86_TSC=3Dy
> CONFIG_X86_CMPXCHG64=3Dy
> CONFIG_X86_CMOV=3Dy
> CONFIG_X86_MINIMUM_CPU_FAMILY=3D4
> CONFIG_X86_DEBUGCTLMSR=3Dy
> CONFIG_CPU_SUP_INTEL=3Dy
> CONFIG_CPU_SUP_CYRIX_32=3Dy
> CONFIG_CPU_SUP_AMD=3Dy
> CONFIG_CPU_SUP_CENTAUR_32=3Dy
> CONFIG_CPU_SUP_TRANSMETA_32=3Dy
> CONFIG_CPU_SUP_UMC_32=3Dy
> CONFIG_X86_DS=3Dy
> CONFIG_X86_PTRACE_BTS=3Dy
> # CONFIG_HPET_TIMER is not set
> CONFIG_DMI=3Dy
> # CONFIG_IOMMU_HELPER is not set
> # CONFIG_IOMMU_API is not set
> CONFIG_NR_CPUS=3D32
> CONFIG_SCHED_SMT=3Dy
> # CONFIG_SCHED_MC is not set
> CONFIG_PREEMPT_NONE=3Dy
> # CONFIG_PREEMPT_VOLUNTARY is not set
> # CONFIG_PREEMPT is not set
> CONFIG_X86_LOCAL_APIC=3Dy
> CONFIG_X86_IO_APIC=3Dy
> # CONFIG_X86_REROUTE_FOR_BROKEN_BOOT_IRQS is not set
> CONFIG_X86_MCE=3Dy
> CONFIG_X86_MCE_NONFATAL=3Dy
> CONFIG_X86_MCE_P4THERMAL=3Dy
> CONFIG_VM86=3Dy
> # CONFIG_TOSHIBA is not set
> # CONFIG_I8K is not set
> # CONFIG_X86_REBOOTFIXUPS is not set
> CONFIG_MICROCODE=3Dm
> CONFIG_MICROCODE_INTEL=3Dy
> # CONFIG_MICROCODE_AMD is not set
> CONFIG_MICROCODE_OLD_INTERFACE=3Dy
> CONFIG_X86_MSR=3Dm
> CONFIG_X86_CPUID=3Dm
> CONFIG_NOHIGHMEM=3Dy
> # CONFIG_HIGHMEM4G is not set
> # CONFIG_HIGHMEM64G is not set
> CONFIG_PAGE_OFFSET=3D0xC0000000
> CONFIG_X86_PAE=3Dy
> CONFIG_ARCH_PHYS_ADDR_T_64BIT=3Dy
> CONFIG_ARCH_FLATMEM_ENABLE=3Dy
> CONFIG_ARCH_SPARSEMEM_ENABLE=3Dy
> CONFIG_ARCH_SELECT_MEMORY_MODEL=3Dy
> CONFIG_SELECT_MEMORY_MODEL=3Dy
> CONFIG_FLATMEM_MANUAL=3Dy
> # CONFIG_DISCONTIGMEM_MANUAL is not set
> # CONFIG_SPARSEMEM_MANUAL is not set
> CONFIG_FLATMEM=3Dy
> CONFIG_FLAT_NODE_MEM_MAP=3Dy
> CONFIG_SPARSEMEM_STATIC=3Dy
> CONFIG_PAGEFLAGS_EXTENDED=3Dy
> CONFIG_SPLIT_PTLOCK_CPUS=3D4
> CONFIG_PHYS_ADDR_T_64BIT=3Dy
> CONFIG_ZONE_DMA_FLAG=3D1
> CONFIG_BOUNCE=3Dy
> CONFIG_VIRT_TO_BUS=3Dy
> CONFIG_UNEVICTABLE_LRU=3Dy
> # CONFIG_X86_CHECK_BIOS_CORRUPTION is not set
> # CONFIG_X86_RESERVE_LOW_64K is not set
> # CONFIG_MATH_EMULATION is not set
> CONFIG_MTRR=3Dy
> # CONFIG_MTRR_SANITIZER is not set
> CONFIG_X86_PAT=3Dy
> # CONFIG_EFI is not set
> CONFIG_SECCOMP=3Dy
> CONFIG_HZ_100=3Dy
> # CONFIG_HZ_250 is not set
> # CONFIG_HZ_300 is not set
> # CONFIG_HZ_1000 is not set
> CONFIG_HZ=3D100
> CONFIG_SCHED_HRTICK=3Dy
> # CONFIG_KEXEC is not set
> CONFIG_PHYSICAL_START=3D0x100000
> # CONFIG_RELOCATABLE is not set
> CONFIG_PHYSICAL_ALIGN=3D0x100000
> # CONFIG_HOTPLUG_CPU is not set
> # CONFIG_COMPAT_VDSO is not set
> # CONFIG_CMDLINE_BOOL is not set
>=20
> #
> # Power management and ACPI options
> #
> CONFIG_PM=3Dy
> # CONFIG_PM_DEBUG is not set
> # CONFIG_SUSPEND is not set
> # CONFIG_HIBERNATION is not set
> CONFIG_ACPI=3Dy
> # CONFIG_ACPI_PROCFS is not set
> # CONFIG_ACPI_PROCFS_POWER is not set
> CONFIG_ACPI_SYSFS_POWER=3Dy
> CONFIG_ACPI_PROC_EVENT=3Dy
> CONFIG_ACPI_AC=3Dm
> CONFIG_ACPI_BATTERY=3Dm
> CONFIG_ACPI_BUTTON=3Dm
> CONFIG_ACPI_FAN=3Dm
> CONFIG_ACPI_DOCK=3Dy
> CONFIG_ACPI_PROCESSOR=3Dm
> CONFIG_ACPI_THERMAL=3Dm
> # CONFIG_ACPI_CUSTOM_DSDT is not set
> CONFIG_ACPI_BLACKLIST_YEAR=3D0
> # CONFIG_ACPI_DEBUG is not set
> CONFIG_ACPI_PCI_SLOT=3Dm
> CONFIG_X86_PM_TIMER=3Dy
> # CONFIG_ACPI_CONTAINER is not set
> # CONFIG_ACPI_SBS is not set
>=20
> #
> # CPU Frequency scaling
> #
> CONFIG_CPU_FREQ=3Dy
> CONFIG_CPU_FREQ_TABLE=3Dy
> # CONFIG_CPU_FREQ_DEBUG is not set
> CONFIG_CPU_FREQ_STAT=3Dm
> CONFIG_CPU_FREQ_STAT_DETAILS=3Dy
> # CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set
> # CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
> # CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
> CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=3Dy
> # CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
> CONFIG_CPU_FREQ_GOV_PERFORMANCE=3Dy
> CONFIG_CPU_FREQ_GOV_POWERSAVE=3Dm
> CONFIG_CPU_FREQ_GOV_USERSPACE=3Dm
> CONFIG_CPU_FREQ_GOV_ONDEMAND=3Dy
> CONFIG_CPU_FREQ_GOV_CONSERVATIVE=3Dm
>=20
> #
> # CPUFreq processor drivers
> #
> # CONFIG_X86_ACPI_CPUFREQ is not set
> # CONFIG_X86_POWERNOW_K6 is not set
> # CONFIG_X86_POWERNOW_K7 is not set
> # CONFIG_X86_POWERNOW_K8 is not set
> # CONFIG_X86_GX_SUSPMOD is not set
> # CONFIG_X86_SPEEDSTEP_CENTRINO is not set
> # CONFIG_X86_SPEEDSTEP_ICH is not set
> # CONFIG_X86_SPEEDSTEP_SMI is not set
> CONFIG_X86_P4_CLOCKMOD=3Dm
> # CONFIG_X86_CPUFREQ_NFORCE2 is not set
> # CONFIG_X86_LONGRUN is not set
> # CONFIG_X86_LONGHAUL is not set
> # CONFIG_X86_E_POWERSAVER is not set
>=20
> #
> # shared options
> #
> CONFIG_X86_SPEEDSTEP_LIB=3Dm
> CONFIG_CPU_IDLE=3Dy
> CONFIG_CPU_IDLE_GOV_LADDER=3Dy
> CONFIG_CPU_IDLE_GOV_MENU=3Dy
>=20
> #
> # Bus options (PCI etc.)
> #
> CONFIG_PCI=3Dy
> # CONFIG_PCI_GOBIOS is not set
> # CONFIG_PCI_GOMMCONFIG is not set
> # CONFIG_PCI_GODIRECT is not set
> # CONFIG_PCI_GOOLPC is not set
> CONFIG_PCI_GOANY=3Dy
> CONFIG_PCI_BIOS=3Dy
> CONFIG_PCI_DIRECT=3Dy
> CONFIG_PCI_MMCONFIG=3Dy
> CONFIG_PCI_DOMAINS=3Dy
> # CONFIG_PCIEPORTBUS is not set
> CONFIG_ARCH_SUPPORTS_MSI=3Dy
> CONFIG_PCI_MSI=3Dy
> # CONFIG_PCI_LEGACY is not set
> # CONFIG_PCI_STUB is not set
> CONFIG_HT_IRQ=3Dy
> CONFIG_ISA_DMA_API=3Dy
> # CONFIG_ISA is not set
> # CONFIG_MCA is not set
> # CONFIG_SCx200 is not set
> # CONFIG_OLPC is not set
> # CONFIG_PCCARD is not set
> # CONFIG_HOTPLUG_PCI is not set
>=20
> #
> # Executable file formats / Emulations
> #
> CONFIG_BINFMT_ELF=3Dy
> # CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
> CONFIG_HAVE_AOUT=3Dy
> CONFIG_BINFMT_AOUT=3Dm
> CONFIG_BINFMT_MISC=3Dm
> CONFIG_HAVE_ATOMIC_IOMAP=3Dy
> CONFIG_NET=3Dy
>=20
> #
> # Networking options
> #
> CONFIG_COMPAT_NET_DEV_OPS=3Dy
> CONFIG_PACKET=3Dy
> CONFIG_PACKET_MMAP=3Dy
> CONFIG_UNIX=3Dy
> CONFIG_XFRM=3Dy
> CONFIG_XFRM_USER=3Dm
> # CONFIG_XFRM_SUB_POLICY is not set
> # CONFIG_XFRM_MIGRATE is not set
> # CONFIG_XFRM_STATISTICS is not set
> # CONFIG_NET_KEY is not set
> CONFIG_INET=3Dy
> CONFIG_IP_MULTICAST=3Dy
> # CONFIG_IP_ADVANCED_ROUTER is not set
> CONFIG_IP_FIB_HASH=3Dy
> # CONFIG_IP_PNP is not set
> # CONFIG_NET_IPIP is not set
> # CONFIG_NET_IPGRE is not set
> # CONFIG_IP_MROUTE is not set
> # CONFIG_ARPD is not set
> CONFIG_SYN_COOKIES=3Dy
> # CONFIG_INET_AH is not set
> # CONFIG_INET_ESP is not set
> # CONFIG_INET_IPCOMP is not set
> # CONFIG_INET_XFRM_TUNNEL is not set
> CONFIG_INET_TUNNEL=3Dm
> CONFIG_INET_XFRM_MODE_TRANSPORT=3Dm
> CONFIG_INET_XFRM_MODE_TUNNEL=3Dm
> CONFIG_INET_XFRM_MODE_BEET=3Dm
> CONFIG_INET_LRO=3Dy
> CONFIG_INET_DIAG=3Dm
> CONFIG_INET_TCP_DIAG=3Dm
> # CONFIG_TCP_CONG_ADVANCED is not set
> CONFIG_TCP_CONG_CUBIC=3Dy
> CONFIG_DEFAULT_TCP_CONG=3D"cubic"
> # CONFIG_TCP_MD5SIG is not set
> CONFIG_IPV6=3Dy
> # CONFIG_IPV6_PRIVACY is not set
> # CONFIG_IPV6_ROUTER_PREF is not set
> # CONFIG_IPV6_OPTIMISTIC_DAD is not set
> # CONFIG_INET6_AH is not set
> # CONFIG_INET6_ESP is not set
> # CONFIG_INET6_IPCOMP is not set
> # CONFIG_IPV6_MIP6 is not set
> # CONFIG_INET6_XFRM_TUNNEL is not set
> # CONFIG_INET6_TUNNEL is not set
> CONFIG_INET6_XFRM_MODE_TRANSPORT=3Dm
> CONFIG_INET6_XFRM_MODE_TUNNEL=3Dm
> CONFIG_INET6_XFRM_MODE_BEET=3Dm
> # CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
> CONFIG_IPV6_SIT=3Dm
> CONFIG_IPV6_NDISC_NODETYPE=3Dy
> # CONFIG_IPV6_TUNNEL is not set
> # CONFIG_IPV6_MULTIPLE_TABLES is not set
> # CONFIG_IPV6_MROUTE is not set
> # CONFIG_NETLABEL is not set
> CONFIG_NETWORK_SECMARK=3Dy
> # CONFIG_NETFILTER is not set
> # CONFIG_IP_DCCP is not set
> CONFIG_IP_SCTP=3Dm
> # CONFIG_SCTP_DBG_MSG is not set
> # CONFIG_SCTP_DBG_OBJCNT is not set
> # CONFIG_SCTP_HMAC_NONE is not set
> # CONFIG_SCTP_HMAC_SHA1 is not set
> CONFIG_SCTP_HMAC_MD5=3Dy
> # CONFIG_TIPC is not set
> # CONFIG_ATM is not set
> # CONFIG_BRIDGE is not set
> # CONFIG_NET_DSA is not set
> # CONFIG_VLAN_8021Q is not set
> # CONFIG_DECNET is not set
> # CONFIG_LLC2 is not set
> # CONFIG_IPX is not set
> # CONFIG_ATALK is not set
> # CONFIG_X25 is not set
> # CONFIG_LAPB is not set
> # CONFIG_ECONET is not set
> # CONFIG_WAN_ROUTER is not set
> # CONFIG_NET_SCHED is not set
> # CONFIG_DCB is not set
>=20
> #
> # Network testing
> #
> # CONFIG_NET_PKTGEN is not set
> # CONFIG_HAMRADIO is not set
> # CONFIG_CAN is not set
> # CONFIG_IRDA is not set
> # CONFIG_BT is not set
> CONFIG_AF_RXRPC=3Dm
> # CONFIG_AF_RXRPC_DEBUG is not set
> CONFIG_RXKAD=3Dm
> # CONFIG_PHONET is not set
> # CONFIG_WIRELESS is not set
> # CONFIG_WIMAX is not set
> # CONFIG_RFKILL is not set
> # CONFIG_NET_9P is not set
>=20
> #
> # Device Drivers
> #
>=20
> #
> # Generic Driver Options
> #
> CONFIG_UEVENT_HELPER_PATH=3D"/sbin/hotplug"
> CONFIG_STANDALONE=3Dy
> # CONFIG_PREVENT_FIRMWARE_BUILD is not set
> CONFIG_FW_LOADER=3Dy
> # CONFIG_FIRMWARE_IN_KERNEL is not set
> CONFIG_EXTRA_FIRMWARE=3D""
> # CONFIG_SYS_HYPERVISOR is not set
> CONFIG_CONNECTOR=3Dm
> # CONFIG_MTD is not set
> CONFIG_PARPORT=3Dm
> CONFIG_PARPORT_PC=3Dm
> # CONFIG_PARPORT_SERIAL is not set
> CONFIG_PARPORT_PC_FIFO=3Dy
> # CONFIG_PARPORT_PC_SUPERIO is not set
> # CONFIG_PARPORT_GSC is not set
> # CONFIG_PARPORT_AX88796 is not set
> CONFIG_PARPORT_1284=3Dy
> CONFIG_PNP=3Dy
> # CONFIG_PNP_DEBUG_MESSAGES is not set
>=20
> #
> # Protocols
> #
> CONFIG_PNPACPI=3Dy
> CONFIG_BLK_DEV=3Dy
> CONFIG_BLK_DEV_FD=3Dm
> # CONFIG_PARIDE is not set
> # CONFIG_BLK_CPQ_DA is not set
> # CONFIG_BLK_CPQ_CISS_DA is not set
> # CONFIG_BLK_DEV_DAC960 is not set
> # CONFIG_BLK_DEV_UMEM is not set
> # CONFIG_BLK_DEV_COW_COMMON is not set
> CONFIG_BLK_DEV_LOOP=3Dm
> CONFIG_BLK_DEV_CRYPTOLOOP=3Dm
> # CONFIG_BLK_DEV_NBD is not set
> # CONFIG_BLK_DEV_SX8 is not set
> # CONFIG_BLK_DEV_UB is not set
> # CONFIG_BLK_DEV_RAM is not set
> # CONFIG_CDROM_PKTCDVD is not set
> # CONFIG_ATA_OVER_ETH is not set
> # CONFIG_BLK_DEV_HD is not set
> CONFIG_MISC_DEVICES=3Dy
> # CONFIG_IBM_ASM is not set
> # CONFIG_PHANTOM is not set
> # CONFIG_SGI_IOC4 is not set
> # CONFIG_TIFM_CORE is not set
> # CONFIG_ICS932S401 is not set
> # CONFIG_ENCLOSURE_SERVICES is not set
> # CONFIG_HP_ILO is not set
> # CONFIG_C2PORT is not set
>=20
> #
> # EEPROM support
> #
> CONFIG_EEPROM_AT24=3Dm
> # CONFIG_EEPROM_LEGACY is not set
> # CONFIG_EEPROM_93CX6 is not set
> CONFIG_HAVE_IDE=3Dy
> # CONFIG_IDE is not set
>=20
> #
> # SCSI device support
> #
> # CONFIG_RAID_ATTRS is not set
> CONFIG_SCSI=3Dy
> CONFIG_SCSI_DMA=3Dy
> CONFIG_SCSI_TGT=3Dm
> # CONFIG_SCSI_NETLINK is not set
> CONFIG_SCSI_PROC_FS=3Dy
>=20
> #
> # SCSI support type (disk, tape, CD-ROM)
> #
> CONFIG_BLK_DEV_SD=3Dy
> # CONFIG_CHR_DEV_ST is not set
> # CONFIG_CHR_DEV_OSST is not set
> CONFIG_BLK_DEV_SR=3Dm
> # CONFIG_BLK_DEV_SR_VENDOR is not set
> CONFIG_CHR_DEV_SG=3Dm
> # CONFIG_CHR_DEV_SCH is not set
>=20
> #
> # Some SCSI devices (e.g. CD jukebox) support multiple LUNs
> #
> # CONFIG_SCSI_MULTI_LUN is not set
> # CONFIG_SCSI_CONSTANTS is not set
> # CONFIG_SCSI_LOGGING is not set
> # CONFIG_SCSI_SCAN_ASYNC is not set
> CONFIG_SCSI_WAIT_SCAN=3Dm
>=20
> #
> # SCSI Transports
> #
> # CONFIG_SCSI_SPI_ATTRS is not set
> # CONFIG_SCSI_FC_ATTRS is not set
> # CONFIG_SCSI_ISCSI_ATTRS is not set
> # CONFIG_SCSI_SAS_LIBSAS is not set
> # CONFIG_SCSI_SRP_ATTRS is not set
> # CONFIG_SCSI_LOWLEVEL is not set
> # CONFIG_SCSI_DH is not set
> CONFIG_ATA=3Dy
> # CONFIG_ATA_NONSTANDARD is not set
> CONFIG_ATA_ACPI=3Dy
> # CONFIG_SATA_PMP is not set
> # CONFIG_SATA_AHCI is not set
> # CONFIG_SATA_SIL24 is not set
> CONFIG_ATA_SFF=3Dy
> # CONFIG_SATA_SVW is not set
> CONFIG_ATA_PIIX=3Dy
> # CONFIG_SATA_MV is not set
> # CONFIG_SATA_NV is not set
> # CONFIG_PDC_ADMA is not set
> # CONFIG_SATA_QSTOR is not set
> # CONFIG_SATA_PROMISE is not set
> # CONFIG_SATA_SX4 is not set
> CONFIG_SATA_SIL=3Dy
> # CONFIG_SATA_SIS is not set
> # CONFIG_SATA_ULI is not set
> # CONFIG_SATA_VIA is not set
> # CONFIG_SATA_VITESSE is not set
> # CONFIG_SATA_INIC162X is not set
> # CONFIG_PATA_ACPI is not set
> # CONFIG_PATA_ALI is not set
> # CONFIG_PATA_AMD is not set
> # CONFIG_PATA_ARTOP is not set
> # CONFIG_PATA_ATIIXP is not set
> # CONFIG_PATA_CMD640_PCI is not set
> # CONFIG_PATA_CMD64X is not set
> # CONFIG_PATA_CS5520 is not set
> # CONFIG_PATA_CS5530 is not set
> # CONFIG_PATA_CS5535 is not set
> # CONFIG_PATA_CS5536 is not set
> # CONFIG_PATA_CYPRESS is not set
> # CONFIG_PATA_EFAR is not set
> # CONFIG_ATA_GENERIC is not set
> # CONFIG_PATA_HPT366 is not set
> # CONFIG_PATA_HPT37X is not set
> # CONFIG_PATA_HPT3X2N is not set
> # CONFIG_PATA_HPT3X3 is not set
> # CONFIG_PATA_IT821X is not set
> # CONFIG_PATA_IT8213 is not set
> # CONFIG_PATA_JMICRON is not set
> # CONFIG_PATA_TRIFLEX is not set
> # CONFIG_PATA_MARVELL is not set
> CONFIG_PATA_MPIIX=3Dy
> CONFIG_PATA_OLDPIIX=3Dm
> # CONFIG_PATA_NETCELL is not set
> # CONFIG_PATA_NINJA32 is not set
> # CONFIG_PATA_NS87410 is not set
> # CONFIG_PATA_NS87415 is not set
> # CONFIG_PATA_OPTI is not set
> # CONFIG_PATA_OPTIDMA is not set
> # CONFIG_PATA_PDC_OLD is not set
> # CONFIG_PATA_RADISYS is not set
> # CONFIG_PATA_RZ1000 is not set
> # CONFIG_PATA_SC1200 is not set
> # CONFIG_PATA_SERVERWORKS is not set
> # CONFIG_PATA_PDC2027X is not set
> # CONFIG_PATA_SIL680 is not set
> # CONFIG_PATA_SIS is not set
> # CONFIG_PATA_VIA is not set
> # CONFIG_PATA_WINBOND is not set
> # CONFIG_PATA_SCH is not set
> CONFIG_MD=3Dy
> CONFIG_BLK_DEV_MD=3Dy
> CONFIG_MD_AUTODETECT=3Dy
> # CONFIG_MD_LINEAR is not set
> # CONFIG_MD_RAID0 is not set
> CONFIG_MD_RAID1=3Dy
> # CONFIG_MD_RAID10 is not set
> CONFIG_MD_RAID456=3Dm
> # CONFIG_MD_RAID5_RESHAPE is not set
> # CONFIG_MD_MULTIPATH is not set
> CONFIG_MD_FAULTY=3Dm
> CONFIG_BLK_DEV_DM=3Dm
> # CONFIG_DM_DEBUG is not set
> CONFIG_DM_CRYPT=3Dm
> CONFIG_DM_SNAPSHOT=3Dm
> # CONFIG_DM_MIRROR is not set
> # CONFIG_DM_ZERO is not set
> # CONFIG_DM_MULTIPATH is not set
> # CONFIG_DM_DELAY is not set
> # CONFIG_DM_UEVENT is not set
> # CONFIG_FUSION is not set
>=20
> #
> # IEEE 1394 (FireWire) support
> #
>=20
> #
> # Enable only one of the two stacks, unless you know what you are doi=
ng
> #
> # CONFIG_FIREWIRE is not set
> # CONFIG_IEEE1394 is not set
> # CONFIG_I2O is not set
> # CONFIG_MACINTOSH_DRIVERS is not set
> CONFIG_NETDEVICES=3Dy
> # CONFIG_DUMMY is not set
> # CONFIG_BONDING is not set
> # CONFIG_MACVLAN is not set
> # CONFIG_EQUALIZER is not set
> # CONFIG_TUN is not set
> # CONFIG_VETH is not set
> # CONFIG_NET_SB1000 is not set
> # CONFIG_ARCNET is not set
> CONFIG_PHYLIB=3Dm
>=20
> #
> # MII PHY device drivers
> #
> # CONFIG_MARVELL_PHY is not set
> # CONFIG_DAVICOM_PHY is not set
> # CONFIG_QSEMI_PHY is not set
> CONFIG_LXT_PHY=3Dm
> # CONFIG_CICADA_PHY is not set
> # CONFIG_VITESSE_PHY is not set
> # CONFIG_SMSC_PHY is not set
> # CONFIG_BROADCOM_PHY is not set
> # CONFIG_ICPLUS_PHY is not set
> # CONFIG_REALTEK_PHY is not set
> # CONFIG_NATIONAL_PHY is not set
> # CONFIG_STE10XP is not set
> # CONFIG_LSI_ET1011C_PHY is not set
> # CONFIG_MDIO_BITBANG is not set
> CONFIG_NET_ETHERNET=3Dy
> CONFIG_MII=3Dy
> # CONFIG_HAPPYMEAL is not set
> # CONFIG_SUNGEM is not set
> # CONFIG_CASSINI is not set
> # CONFIG_NET_VENDOR_3COM is not set
> # CONFIG_DNET is not set
> # CONFIG_NET_TULIP is not set
> # CONFIG_HP100 is not set
> # CONFIG_IBM_NEW_EMAC_ZMII is not set
> # CONFIG_IBM_NEW_EMAC_RGMII is not set
> # CONFIG_IBM_NEW_EMAC_TAH is not set
> # CONFIG_IBM_NEW_EMAC_EMAC4 is not set
> # CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
> # CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
> # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
> CONFIG_NET_PCI=3Dy
> # CONFIG_PCNET32 is not set
> # CONFIG_AMD8111_ETH is not set
> # CONFIG_ADAPTEC_STARFIRE is not set
> # CONFIG_B44 is not set
> # CONFIG_FORCEDETH is not set
> CONFIG_E100=3Dm
> # CONFIG_FEALNX is not set
> # CONFIG_NATSEMI is not set
> # CONFIG_NE2K_PCI is not set
> # CONFIG_8139CP is not set
> # CONFIG_8139TOO is not set
> # CONFIG_R6040 is not set
> # CONFIG_SIS900 is not set
> # CONFIG_EPIC100 is not set
> # CONFIG_SMSC9420 is not set
> # CONFIG_SUNDANCE is not set
> # CONFIG_TLAN is not set
> # CONFIG_VIA_RHINE is not set
> # CONFIG_SC92031 is not set
> # CONFIG_NET_POCKET is not set
> # CONFIG_ATL2 is not set
> CONFIG_NETDEV_1000=3Dy
> # CONFIG_ACENIC is not set
> # CONFIG_DL2K is not set
> CONFIG_E1000=3Dy
> # CONFIG_E1000E is not set
> # CONFIG_IP1000 is not set
> # CONFIG_IGB is not set
> # CONFIG_NS83820 is not set
> # CONFIG_HAMACHI is not set
> # CONFIG_YELLOWFIN is not set
> # CONFIG_R8169 is not set
> # CONFIG_SIS190 is not set
> # CONFIG_SKGE is not set
> # CONFIG_SKY2 is not set
> # CONFIG_VIA_VELOCITY is not set
> # CONFIG_TIGON3 is not set
> # CONFIG_BNX2 is not set
> # CONFIG_QLA3XXX is not set
> # CONFIG_ATL1 is not set
> # CONFIG_ATL1E is not set
> # CONFIG_ATL1C is not set
> # CONFIG_JME is not set
> # CONFIG_NETDEV_10000 is not set
> # CONFIG_TR is not set
>=20
> #
> # Wireless LAN
> #
> # CONFIG_WLAN_PRE80211 is not set
> # CONFIG_WLAN_80211 is not set
> # CONFIG_IWLWIFI_LEDS is not set
>=20
> #
> # Enable WiMAX (Networking options) to see the WiMAX drivers
> #
>=20
> #
> # USB Network Adapters
> #
> # CONFIG_USB_CATC is not set
> # CONFIG_USB_KAWETH is not set
> # CONFIG_USB_PEGASUS is not set
> # CONFIG_USB_RTL8150 is not set
> # CONFIG_USB_USBNET is not set
> # CONFIG_WAN is not set
> # CONFIG_FDDI is not set
> # CONFIG_HIPPI is not set
> # CONFIG_PLIP is not set
> # CONFIG_PPP is not set
> # CONFIG_SLIP is not set
> # CONFIG_NET_FC is not set
> # CONFIG_NETCONSOLE is not set
> # CONFIG_NETPOLL is not set
> # CONFIG_NET_POLL_CONTROLLER is not set
> # CONFIG_ISDN is not set
> # CONFIG_PHONE is not set
>=20
> #
> # Input device support
> #
> CONFIG_INPUT=3Dy
> # CONFIG_INPUT_FF_MEMLESS is not set
> # CONFIG_INPUT_POLLDEV is not set
>=20
> #
> # Userland interfaces
> #
> CONFIG_INPUT_MOUSEDEV=3Dy
> # CONFIG_INPUT_MOUSEDEV_PSAUX is not set
> CONFIG_INPUT_MOUSEDEV_SCREEN_X=3D1024
> CONFIG_INPUT_MOUSEDEV_SCREEN_Y=3D768
> # CONFIG_INPUT_JOYDEV is not set
> # CONFIG_INPUT_EVDEV is not set
> # CONFIG_INPUT_EVBUG is not set
>=20
> #
> # Input Device Drivers
> #
> CONFIG_INPUT_KEYBOARD=3Dy
> CONFIG_KEYBOARD_ATKBD=3Dy
> # CONFIG_KEYBOARD_SUNKBD is not set
> # CONFIG_KEYBOARD_LKKBD is not set
> # CONFIG_KEYBOARD_XTKBD is not set
> # CONFIG_KEYBOARD_NEWTON is not set
> # CONFIG_KEYBOARD_STOWAWAY is not set
> # CONFIG_INPUT_MOUSE is not set
> # CONFIG_INPUT_JOYSTICK is not set
> # CONFIG_INPUT_TABLET is not set
> # CONFIG_INPUT_TOUCHSCREEN is not set
> # CONFIG_INPUT_MISC is not set
>=20
> #
> # Hardware I/O ports
> #
> CONFIG_SERIO=3Dy
> CONFIG_SERIO_I8042=3Dy
> # CONFIG_SERIO_SERPORT is not set
> # CONFIG_SERIO_CT82C710 is not set
> # CONFIG_SERIO_PARKBD is not set
> # CONFIG_SERIO_PCIPS2 is not set
> CONFIG_SERIO_LIBPS2=3Dy
> # CONFIG_SERIO_RAW is not set
> # CONFIG_GAMEPORT is not set
>=20
> #
> # Character devices
> #
> CONFIG_VT=3Dy
> CONFIG_CONSOLE_TRANSLATIONS=3Dy
> CONFIG_VT_CONSOLE=3Dy
> CONFIG_HW_CONSOLE=3Dy
> # CONFIG_VT_HW_CONSOLE_BINDING is not set
> # CONFIG_DEVKMEM is not set
> # CONFIG_SERIAL_NONSTANDARD is not set
> # CONFIG_NOZOMI is not set
>=20
> #
> # Serial drivers
> #
> CONFIG_SERIAL_8250=3Dm
> CONFIG_FIX_EARLYCON_MEM=3Dy
> CONFIG_SERIAL_8250_PCI=3Dm
> CONFIG_SERIAL_8250_PNP=3Dm
> CONFIG_SERIAL_8250_NR_UARTS=3D4
> CONFIG_SERIAL_8250_RUNTIME_UARTS=3D4
> # CONFIG_SERIAL_8250_EXTENDED is not set
>=20
> #
> # Non-8250 serial port support
> #
> CONFIG_SERIAL_CORE=3Dm
> # CONFIG_SERIAL_JSM is not set
> CONFIG_UNIX98_PTYS=3Dy
> # CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
> CONFIG_LEGACY_PTYS=3Dy
> CONFIG_LEGACY_PTY_COUNT=3D256
> CONFIG_PRINTER=3Dm
> # CONFIG_LP_CONSOLE is not set
> # CONFIG_PPDEV is not set
> # CONFIG_IPMI_HANDLER is not set
> CONFIG_HW_RANDOM=3Dy
> CONFIG_HW_RANDOM_INTEL=3Dy
> # CONFIG_HW_RANDOM_AMD is not set
> # CONFIG_HW_RANDOM_GEODE is not set
> # CONFIG_HW_RANDOM_VIA is not set
> CONFIG_NVRAM=3Dm
> # CONFIG_R3964 is not set
> # CONFIG_APPLICOM is not set
> # CONFIG_SONYPI is not set
> # CONFIG_MWAVE is not set
> # CONFIG_PC8736x_GPIO is not set
> # CONFIG_NSC_GPIO is not set
> # CONFIG_CS5535_GPIO is not set
> # CONFIG_RAW_DRIVER is not set
> CONFIG_HPET=3Dy
> CONFIG_HPET_MMAP=3Dy
> CONFIG_HANGCHECK_TIMER=3Dm
> # CONFIG_TCG_TPM is not set
> # CONFIG_TELCLOCK is not set
> CONFIG_DEVPORT=3Dy
> CONFIG_I2C=3Dy
> CONFIG_I2C_BOARDINFO=3Dy
> CONFIG_I2C_CHARDEV=3Dm
> CONFIG_I2C_HELPER_AUTO=3Dy
> CONFIG_I2C_ALGOBIT=3Dm
>=20
> #
> # I2C Hardware Bus support
> #
>=20
> #
> # PC SMBus host controller drivers
> #
> # CONFIG_I2C_ALI1535 is not set
> # CONFIG_I2C_ALI1563 is not set
> # CONFIG_I2C_ALI15X3 is not set
> # CONFIG_I2C_AMD756 is not set
> # CONFIG_I2C_AMD8111 is not set
> CONFIG_I2C_I801=3Dy
> # CONFIG_I2C_ISCH is not set
> # CONFIG_I2C_PIIX4 is not set
> # CONFIG_I2C_NFORCE2 is not set
> # CONFIG_I2C_SIS5595 is not set
> # CONFIG_I2C_SIS630 is not set
> # CONFIG_I2C_SIS96X is not set
> # CONFIG_I2C_VIA is not set
> # CONFIG_I2C_VIAPRO is not set
>=20
> #
> # I2C system bus drivers (mostly embedded / system-on-chip)
> #
> # CONFIG_I2C_OCORES is not set
> # CONFIG_I2C_SIMTEC is not set
>=20
> #
> # External I2C/SMBus adapter drivers
> #
> # CONFIG_I2C_PARPORT is not set
> # CONFIG_I2C_PARPORT_LIGHT is not set
> # CONFIG_I2C_TAOS_EVM is not set
> # CONFIG_I2C_TINY_USB is not set
>=20
> #
> # Graphics adapter I2C/DDC channel drivers
> #
> # CONFIG_I2C_VOODOO3 is not set
>=20
> #
> # Other I2C/SMBus bus drivers
> #
> # CONFIG_I2C_PCA_PLATFORM is not set
> # CONFIG_I2C_STUB is not set
> # CONFIG_SCx200_ACB is not set
>=20
> #
> # Miscellaneous I2C Chip support
> #
> # CONFIG_DS1682 is not set
> # CONFIG_SENSORS_PCF8574 is not set
> # CONFIG_PCF8575 is not set
> # CONFIG_SENSORS_PCA9539 is not set
> # CONFIG_SENSORS_PCF8591 is not set
> # CONFIG_SENSORS_MAX6875 is not set
> # CONFIG_SENSORS_TSL2550 is not set
> # CONFIG_I2C_DEBUG_CORE is not set
> # CONFIG_I2C_DEBUG_ALGO is not set
> # CONFIG_I2C_DEBUG_BUS is not set
> # CONFIG_I2C_DEBUG_CHIP is not set
> # CONFIG_SPI is not set
> CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=3Dy
> # CONFIG_GPIOLIB is not set
> # CONFIG_W1 is not set
> CONFIG_POWER_SUPPLY=3Dy
> # CONFIG_POWER_SUPPLY_DEBUG is not set
> # CONFIG_PDA_POWER is not set
> # CONFIG_BATTERY_DS2760 is not set
> # CONFIG_BATTERY_BQ27x00 is not set
> CONFIG_HWMON=3Dy
> CONFIG_HWMON_VID=3Dy
> # CONFIG_SENSORS_ABITUGURU is not set
> # CONFIG_SENSORS_ABITUGURU3 is not set
> # CONFIG_SENSORS_AD7414 is not set
> # CONFIG_SENSORS_AD7418 is not set
> # CONFIG_SENSORS_ADM1021 is not set
> # CONFIG_SENSORS_ADM1025 is not set
> # CONFIG_SENSORS_ADM1026 is not set
> # CONFIG_SENSORS_ADM1029 is not set
> # CONFIG_SENSORS_ADM1031 is not set
> # CONFIG_SENSORS_ADM9240 is not set
> # CONFIG_SENSORS_ADT7462 is not set
> # CONFIG_SENSORS_ADT7470 is not set
> # CONFIG_SENSORS_ADT7473 is not set
> # CONFIG_SENSORS_ADT7475 is not set
> # CONFIG_SENSORS_K8TEMP is not set
> # CONFIG_SENSORS_ASB100 is not set
> # CONFIG_SENSORS_ATXP1 is not set
> # CONFIG_SENSORS_DS1621 is not set
> # CONFIG_SENSORS_I5K_AMB is not set
> # CONFIG_SENSORS_F71805F is not set
> # CONFIG_SENSORS_F71882FG is not set
> # CONFIG_SENSORS_F75375S is not set
> # CONFIG_SENSORS_FSCHER is not set
> # CONFIG_SENSORS_FSCPOS is not set
> # CONFIG_SENSORS_FSCHMD is not set
> # CONFIG_SENSORS_GL518SM is not set
> # CONFIG_SENSORS_GL520SM is not set
> # CONFIG_SENSORS_CORETEMP is not set
> # CONFIG_SENSORS_IT87 is not set
> # CONFIG_SENSORS_LM63 is not set
> # CONFIG_SENSORS_LM75 is not set
> # CONFIG_SENSORS_LM77 is not set
> # CONFIG_SENSORS_LM78 is not set
> # CONFIG_SENSORS_LM80 is not set
> # CONFIG_SENSORS_LM83 is not set
> CONFIG_SENSORS_LM85=3Dy
> # CONFIG_SENSORS_LM87 is not set
> # CONFIG_SENSORS_LM90 is not set
> # CONFIG_SENSORS_LM92 is not set
> # CONFIG_SENSORS_LM93 is not set
> # CONFIG_SENSORS_LTC4245 is not set
> # CONFIG_SENSORS_MAX1619 is not set
> # CONFIG_SENSORS_MAX6650 is not set
> # CONFIG_SENSORS_PC87360 is not set
> # CONFIG_SENSORS_PC87427 is not set
> # CONFIG_SENSORS_SIS5595 is not set
> # CONFIG_SENSORS_DME1737 is not set
> # CONFIG_SENSORS_SMSC47M1 is not set
> # CONFIG_SENSORS_SMSC47M192 is not set
> # CONFIG_SENSORS_SMSC47B397 is not set
> # CONFIG_SENSORS_ADS7828 is not set
> # CONFIG_SENSORS_THMC50 is not set
> # CONFIG_SENSORS_VIA686A is not set
> # CONFIG_SENSORS_VT1211 is not set
> # CONFIG_SENSORS_VT8231 is not set
> # CONFIG_SENSORS_W83781D is not set
> # CONFIG_SENSORS_W83791D is not set
> # CONFIG_SENSORS_W83792D is not set
> # CONFIG_SENSORS_W83793 is not set
> # CONFIG_SENSORS_W83L785TS is not set
> # CONFIG_SENSORS_W83L786NG is not set
> # CONFIG_SENSORS_W83627HF is not set
> # CONFIG_SENSORS_W83627EHF is not set
> # CONFIG_SENSORS_HDAPS is not set
> # CONFIG_SENSORS_LIS3LV02D is not set
> # CONFIG_SENSORS_APPLESMC is not set
> # CONFIG_HWMON_DEBUG_CHIP is not set
> CONFIG_THERMAL=3Dy
> # CONFIG_THERMAL_HWMON is not set
> # CONFIG_WATCHDOG is not set
> CONFIG_SSB_POSSIBLE=3Dy
>=20
> #
> # Sonics Silicon Backplane
> #
> # CONFIG_SSB is not set
>=20
> #
> # Multifunction device drivers
> #
> # CONFIG_MFD_CORE is not set
> # CONFIG_MFD_SM501 is not set
> # CONFIG_HTC_PASIC3 is not set
> # CONFIG_TWL4030_CORE is not set
> # CONFIG_MFD_TMIO is not set
> # CONFIG_PMIC_DA903X is not set
> # CONFIG_MFD_WM8400 is not set
> # CONFIG_MFD_WM8350_I2C is not set
> # CONFIG_MFD_PCF50633 is not set
> # CONFIG_REGULATOR is not set
>=20
> #
> # Multimedia devices
> #
>=20
> #
> # Multimedia core support
> #
> # CONFIG_VIDEO_DEV is not set
> # CONFIG_DVB_CORE is not set
> # CONFIG_VIDEO_MEDIA is not set
>=20
> #
> # Multimedia drivers
> #
> # CONFIG_DAB is not set
>=20
> #
> # Graphics support
> #
> CONFIG_AGP=3Dm
> # CONFIG_AGP_ALI is not set
> # CONFIG_AGP_ATI is not set
> # CONFIG_AGP_AMD is not set
> # CONFIG_AGP_AMD64 is not set
> CONFIG_AGP_INTEL=3Dm
> # CONFIG_AGP_NVIDIA is not set
> # CONFIG_AGP_SIS is not set
> # CONFIG_AGP_SWORKS is not set
> # CONFIG_AGP_VIA is not set
> # CONFIG_AGP_EFFICEON is not set
> CONFIG_DRM=3Dm
> # CONFIG_DRM_TDFX is not set
> CONFIG_DRM_R128=3Dm
> CONFIG_DRM_RADEON=3Dm
> # CONFIG_DRM_I810 is not set
> # CONFIG_DRM_I830 is not set
> # CONFIG_DRM_I915 is not set
> # CONFIG_DRM_MGA is not set
> # CONFIG_DRM_SIS is not set
> # CONFIG_DRM_VIA is not set
> # CONFIG_DRM_SAVAGE is not set
> # CONFIG_VGASTATE is not set
> # CONFIG_VIDEO_OUTPUT_CONTROL is not set
> # CONFIG_FB is not set
> # CONFIG_BACKLIGHT_LCD_SUPPORT is not set
>=20
> #
> # Display device support
> #
> # CONFIG_DISPLAY_SUPPORT is not set
>=20
> #
> # Console display driver support
> #
> CONFIG_VGA_CONSOLE=3Dy
> # CONFIG_VGACON_SOFT_SCROLLBACK is not set
> CONFIG_DUMMY_CONSOLE=3Dy
> # CONFIG_SOUND is not set
> CONFIG_HID_SUPPORT=3Dy
> CONFIG_HID=3Dm
> # CONFIG_HID_DEBUG is not set
> # CONFIG_HIDRAW is not set
>=20
> #
> # USB Input Devices
> #
> CONFIG_USB_HID=3Dm
> # CONFIG_HID_PID is not set
> CONFIG_USB_HIDDEV=3Dy
>=20
> #
> # Special HID drivers
> #
> # CONFIG_HID_COMPAT is not set
> CONFIG_HID_A4TECH=3Dm
> CONFIG_HID_APPLE=3Dm
> CONFIG_HID_BELKIN=3Dm
> CONFIG_HID_CHERRY=3Dm
> CONFIG_HID_CHICONY=3Dm
> CONFIG_HID_CYPRESS=3Dm
> CONFIG_HID_EZKEY=3Dm
> CONFIG_HID_GYRATION=3Dm
> CONFIG_HID_LOGITECH=3Dm
> # CONFIG_LOGITECH_FF is not set
> # CONFIG_LOGIRUMBLEPAD2_FF is not set
> CONFIG_HID_MICROSOFT=3Dm
> CONFIG_HID_MONTEREY=3Dm
> CONFIG_HID_NTRIG=3Dm
> CONFIG_HID_PANTHERLORD=3Dm
> # CONFIG_PANTHERLORD_FF is not set
> CONFIG_HID_PETALYNX=3Dm
> CONFIG_HID_SAMSUNG=3Dm
> CONFIG_HID_SONY=3Dm
> CONFIG_HID_SUNPLUS=3Dm
> # CONFIG_GREENASIA_FF is not set
> CONFIG_HID_TOPSEED=3Dm
> # CONFIG_THRUSTMASTER_FF is not set
> # CONFIG_ZEROPLUS_FF is not set
> CONFIG_USB_SUPPORT=3Dy
> CONFIG_USB_ARCH_HAS_HCD=3Dy
> CONFIG_USB_ARCH_HAS_OHCI=3Dy
> CONFIG_USB_ARCH_HAS_EHCI=3Dy
> CONFIG_USB=3Dm
> # CONFIG_USB_DEBUG is not set
> # CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
>=20
> #
> # Miscellaneous USB options
> #
> CONFIG_USB_DEVICEFS=3Dy
> # CONFIG_USB_DEVICE_CLASS is not set
> # CONFIG_USB_DYNAMIC_MINORS is not set
> # CONFIG_USB_SUSPEND is not set
> # CONFIG_USB_OTG is not set
> # CONFIG_USB_MON is not set
> # CONFIG_USB_WUSB is not set
> # CONFIG_USB_WUSB_CBAF is not set
>=20
> #
> # USB Host Controller Drivers
> #
> # CONFIG_USB_C67X00_HCD is not set
> CONFIG_USB_EHCI_HCD=3Dm
> # CONFIG_USB_EHCI_ROOT_HUB_TT is not set
> # CONFIG_USB_EHCI_TT_NEWSCHED is not set
> # CONFIG_USB_OXU210HP_HCD is not set
> # CONFIG_USB_ISP116X_HCD is not set
> # CONFIG_USB_ISP1760_HCD is not set
> # CONFIG_USB_OHCI_HCD is not set
> CONFIG_USB_UHCI_HCD=3Dm
> # CONFIG_USB_SL811_HCD is not set
> # CONFIG_USB_R8A66597_HCD is not set
> # CONFIG_USB_WHCI_HCD is not set
> # CONFIG_USB_HWA_HCD is not set
>=20
> #
> # Enable Host or Gadget support to see Inventra options
> #
>=20
> #
> # USB Device Class drivers
> #
> # CONFIG_USB_ACM is not set
> CONFIG_USB_PRINTER=3Dm
> # CONFIG_USB_WDM is not set
> # CONFIG_USB_TMC is not set
>=20
> #
> # NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed=
;
> #
>=20
> #
> # see USB_STORAGE Help for more information
> #
> CONFIG_USB_STORAGE=3Dm
> # CONFIG_USB_STORAGE_DEBUG is not set
> # CONFIG_USB_STORAGE_DATAFAB is not set
> # CONFIG_USB_STORAGE_FREECOM is not set
> # CONFIG_USB_STORAGE_ISD200 is not set
> # CONFIG_USB_STORAGE_USBAT is not set
> # CONFIG_USB_STORAGE_SDDR09 is not set
> # CONFIG_USB_STORAGE_SDDR55 is not set
> # CONFIG_USB_STORAGE_JUMPSHOT is not set
> # CONFIG_USB_STORAGE_ALAUDA is not set
> CONFIG_USB_STORAGE_ONETOUCH=3Dy
> # CONFIG_USB_STORAGE_KARMA is not set
> # CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
> # CONFIG_USB_LIBUSUAL is not set
>=20
> #
> # USB Imaging devices
> #
> # CONFIG_USB_MDC800 is not set
> # CONFIG_USB_MICROTEK is not set
>=20
> #
> # USB port drivers
> #
> # CONFIG_USB_USS720 is not set
> # CONFIG_USB_SERIAL is not set
>=20
> #
> # USB Miscellaneous drivers
> #
> # CONFIG_USB_EMI62 is not set
> # CONFIG_USB_EMI26 is not set
> # CONFIG_USB_ADUTUX is not set
> # CONFIG_USB_SEVSEG is not set
> # CONFIG_USB_RIO500 is not set
> # CONFIG_USB_LEGOTOWER is not set
> # CONFIG_USB_LCD is not set
> # CONFIG_USB_BERRY_CHARGE is not set
> # CONFIG_USB_LED is not set
> # CONFIG_USB_CYPRESS_CY7C63 is not set
> # CONFIG_USB_CYTHERM is not set
> # CONFIG_USB_PHIDGET is not set
> # CONFIG_USB_IDMOUSE is not set
> # CONFIG_USB_FTDI_ELAN is not set
> # CONFIG_USB_APPLEDISPLAY is not set
> # CONFIG_USB_SISUSBVGA is not set
> # CONFIG_USB_LD is not set
> # CONFIG_USB_TRANCEVIBRATOR is not set
> # CONFIG_USB_IOWARRIOR is not set
> # CONFIG_USB_TEST is not set
> # CONFIG_USB_ISIGHTFW is not set
> # CONFIG_USB_VST is not set
> # CONFIG_USB_GADGET is not set
>=20
> #
> # OTG and related infrastructure
> #
> # CONFIG_UWB is not set
> CONFIG_MMC=3Dm
> # CONFIG_MMC_DEBUG is not set
> # CONFIG_MMC_UNSAFE_RESUME is not set
>=20
> #
> # MMC/SD/SDIO Card Drivers
> #
> CONFIG_MMC_BLOCK=3Dm
> CONFIG_MMC_BLOCK_BOUNCE=3Dy
> # CONFIG_SDIO_UART is not set
> # CONFIG_MMC_TEST is not set
>=20
> #
> # MMC/SD/SDIO Host Controller Drivers
> #
> # CONFIG_MMC_SDHCI is not set
> CONFIG_MMC_WBSD=3Dm
> # CONFIG_MMC_TIFM_SD is not set
> # CONFIG_MEMSTICK is not set
> # CONFIG_NEW_LEDS is not set
> # CONFIG_ACCESSIBILITY is not set
> # CONFIG_INFINIBAND is not set
> CONFIG_EDAC=3Dy
>=20
> #
> # Reporting subsystems
> #
> # CONFIG_EDAC_DEBUG is not set
> CONFIG_EDAC_MM_EDAC=3Dy
> # CONFIG_EDAC_AMD76X is not set
> # CONFIG_EDAC_E7XXX is not set
> # CONFIG_EDAC_E752X is not set
> CONFIG_EDAC_I82875P=3Dy
> # CONFIG_EDAC_I82975X is not set
> # CONFIG_EDAC_I3000 is not set
> # CONFIG_EDAC_X38 is not set
> # CONFIG_EDAC_I5400 is not set
> # CONFIG_EDAC_I82860 is not set
> # CONFIG_EDAC_R82600 is not set
> # CONFIG_EDAC_I5000 is not set
> # CONFIG_EDAC_I5100 is not set
> CONFIG_RTC_LIB=3Dm
> CONFIG_RTC_CLASS=3Dm
>=20
> #
> # RTC interfaces
> #
> CONFIG_RTC_INTF_SYSFS=3Dy
> CONFIG_RTC_INTF_PROC=3Dy
> CONFIG_RTC_INTF_DEV=3Dy
> # CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
> # CONFIG_RTC_DRV_TEST is not set
>=20
> #
> # I2C RTC drivers
> #
> # CONFIG_RTC_DRV_DS1307 is not set
> # CONFIG_RTC_DRV_DS1374 is not set
> # CONFIG_RTC_DRV_DS1672 is not set
> # CONFIG_RTC_DRV_MAX6900 is not set
> # CONFIG_RTC_DRV_RS5C372 is not set
> # CONFIG_RTC_DRV_ISL1208 is not set
> # CONFIG_RTC_DRV_X1205 is not set
> # CONFIG_RTC_DRV_PCF8563 is not set
> # CONFIG_RTC_DRV_PCF8583 is not set
> # CONFIG_RTC_DRV_M41T80 is not set
> # CONFIG_RTC_DRV_S35390A is not set
> # CONFIG_RTC_DRV_FM3130 is not set
> # CONFIG_RTC_DRV_RX8581 is not set
>=20
> #
> # SPI RTC drivers
> #
>=20
> #
> # Platform RTC drivers
> #
> CONFIG_RTC_DRV_CMOS=3Dm
> # CONFIG_RTC_DRV_DS1286 is not set
> # CONFIG_RTC_DRV_DS1511 is not set
> # CONFIG_RTC_DRV_DS1553 is not set
> # CONFIG_RTC_DRV_DS1742 is not set
> # CONFIG_RTC_DRV_STK17TA8 is not set
> # CONFIG_RTC_DRV_M48T86 is not set
> # CONFIG_RTC_DRV_M48T35 is not set
> # CONFIG_RTC_DRV_M48T59 is not set
> # CONFIG_RTC_DRV_BQ4802 is not set
> # CONFIG_RTC_DRV_V3020 is not set
>=20
> #
> # on-CPU RTC drivers
> #
> CONFIG_DMADEVICES=3Dy
>=20
> #
> # DMA Devices
> #
> CONFIG_INTEL_IOATDMA=3Dm
> CONFIG_DMA_ENGINE=3Dy
>=20
> #
> # DMA Clients
> #
> CONFIG_NET_DMA=3Dy
> # CONFIG_DMATEST is not set
> CONFIG_DCA=3Dm
> # CONFIG_AUXDISPLAY is not set
> CONFIG_UIO=3Dm
> # CONFIG_UIO_CIF is not set
> CONFIG_UIO_PDRV=3Dm
> CONFIG_UIO_PDRV_GENIRQ=3Dm
> # CONFIG_UIO_SMX is not set
> # CONFIG_UIO_SERCOS3 is not set
> # CONFIG_STAGING is not set
> CONFIG_X86_PLATFORM_DEVICES=3Dy
> # CONFIG_ASUS_LAPTOP is not set
> # CONFIG_TC1100_WMI is not set
> # CONFIG_SONY_LAPTOP is not set
> # CONFIG_THINKPAD_ACPI is not set
> # CONFIG_INTEL_MENLOW is not set
> # CONFIG_EEEPC_LAPTOP is not set
> # CONFIG_ACPI_WMI is not set
> # CONFIG_ACPI_ASUS is not set
> # CONFIG_ACPI_TOSHIBA is not set
>=20
> #
> # Firmware Drivers
> #
> # CONFIG_EDD is not set
> CONFIG_FIRMWARE_MEMMAP=3Dy
> # CONFIG_DELL_RBU is not set
> # CONFIG_DCDBAS is not set
> CONFIG_DMIID=3Dy
> # CONFIG_ISCSI_IBFT_FIND is not set
>=20
> #
> # File systems
> #
> CONFIG_EXT2_FS=3Dm
> # CONFIG_EXT2_FS_XATTR is not set
> # CONFIG_EXT2_FS_XIP is not set
> CONFIG_EXT3_FS=3Dy
> CONFIG_EXT3_FS_XATTR=3Dy
> CONFIG_EXT3_FS_POSIX_ACL=3Dy
> CONFIG_EXT3_FS_SECURITY=3Dy
> CONFIG_EXT4_FS=3Dy
> # CONFIG_EXT4DEV_COMPAT is not set
> CONFIG_EXT4_FS_XATTR=3Dy
> CONFIG_EXT4_FS_POSIX_ACL=3Dy
> CONFIG_EXT4_FS_SECURITY=3Dy
> CONFIG_JBD=3Dy
> # CONFIG_JBD_DEBUG is not set
> CONFIG_JBD2=3Dy
> # CONFIG_JBD2_DEBUG is not set
> CONFIG_FS_MBCACHE=3Dy
> # CONFIG_REISERFS_FS is not set
> # CONFIG_JFS_FS is not set
> CONFIG_FS_POSIX_ACL=3Dy
> CONFIG_FILE_LOCKING=3Dy
> # CONFIG_XFS_FS is not set
> # CONFIG_OCFS2_FS is not set
> # CONFIG_BTRFS_FS is not set
> CONFIG_DNOTIFY=3Dy
> CONFIG_INOTIFY=3Dy
> CONFIG_INOTIFY_USER=3Dy
> # CONFIG_QUOTA is not set
> # CONFIG_AUTOFS_FS is not set
> CONFIG_AUTOFS4_FS=3Dm
> CONFIG_FUSE_FS=3Dm
>=20
> #
> # CD-ROM/DVD Filesystems
> #
> CONFIG_ISO9660_FS=3Dm
> CONFIG_JOLIET=3Dy
> CONFIG_ZISOFS=3Dy
> CONFIG_UDF_FS=3Dm
> CONFIG_UDF_NLS=3Dy
>=20
> #
> # DOS/FAT/NT Filesystems
> #
> CONFIG_FAT_FS=3Dm
> # CONFIG_MSDOS_FS is not set
> CONFIG_VFAT_FS=3Dm
> CONFIG_FAT_DEFAULT_CODEPAGE=3D437
> CONFIG_FAT_DEFAULT_IOCHARSET=3D"iso8859-1"
> # CONFIG_NTFS_FS is not set
>=20
> #
> # Pseudo filesystems
> #
> CONFIG_PROC_FS=3Dy
> # CONFIG_PROC_KCORE is not set
> CONFIG_PROC_SYSCTL=3Dy
> CONFIG_PROC_PAGE_MONITOR=3Dy
> CONFIG_SYSFS=3Dy
> CONFIG_TMPFS=3Dy
> # CONFIG_TMPFS_POSIX_ACL is not set
> # CONFIG_HUGETLBFS is not set
> # CONFIG_HUGETLB_PAGE is not set
> CONFIG_CONFIGFS_FS=3Dm
> CONFIG_MISC_FILESYSTEMS=3Dy
> # CONFIG_ADFS_FS is not set
> # CONFIG_AFFS_FS is not set
> # CONFIG_ECRYPT_FS is not set
> # CONFIG_HFS_FS is not set
> # CONFIG_HFSPLUS_FS is not set
> # CONFIG_BEFS_FS is not set
> # CONFIG_BFS_FS is not set
> # CONFIG_EFS_FS is not set
> # CONFIG_CRAMFS is not set
> # CONFIG_SQUASHFS is not set
> # CONFIG_VXFS_FS is not set
> # CONFIG_MINIX_FS is not set
> # CONFIG_OMFS_FS is not set
> # CONFIG_HPFS_FS is not set
> # CONFIG_QNX4FS_FS is not set
> CONFIG_ROMFS_FS=3Dm
> # CONFIG_SYSV_FS is not set
> # CONFIG_UFS_FS is not set
> CONFIG_NETWORK_FILESYSTEMS=3Dy
> CONFIG_NFS_FS=3Dm
> CONFIG_NFS_V3=3Dy
> CONFIG_NFS_V3_ACL=3Dy
> # CONFIG_NFS_V4 is not set
> CONFIG_NFSD=3Dm
> CONFIG_NFSD_V2_ACL=3Dy
> CONFIG_NFSD_V3=3Dy
> CONFIG_NFSD_V3_ACL=3Dy
> # CONFIG_NFSD_V4 is not set
> CONFIG_LOCKD=3Dm
> CONFIG_LOCKD_V4=3Dy
> CONFIG_EXPORTFS=3Dm
> CONFIG_NFS_ACL_SUPPORT=3Dm
> CONFIG_NFS_COMMON=3Dy
> CONFIG_SUNRPC=3Dm
> CONFIG_SUNRPC_GSS=3Dm
> # CONFIG_SUNRPC_REGISTER_V4 is not set
> CONFIG_RPCSEC_GSS_KRB5=3Dm
> CONFIG_RPCSEC_GSS_SPKM3=3Dm
> CONFIG_SMB_FS=3Dm
> CONFIG_SMB_NLS_DEFAULT=3Dy
> CONFIG_SMB_NLS_REMOTE=3D"cp865"
> CONFIG_CIFS=3Dy
> # CONFIG_CIFS_STATS is not set
> CONFIG_CIFS_WEAK_PW_HASH=3Dy
> # CONFIG_CIFS_UPCALL is not set
> CONFIG_CIFS_XATTR=3Dy
> CONFIG_CIFS_POSIX=3Dy
> # CONFIG_CIFS_DEBUG2 is not set
> # CONFIG_CIFS_EXPERIMENTAL is not set
> # CONFIG_NCP_FS is not set
> # CONFIG_CODA_FS is not set
> # CONFIG_AFS_FS is not set
>=20
> #
> # Partition Types
> #
> # CONFIG_PARTITION_ADVANCED is not set
> CONFIG_MSDOS_PARTITION=3Dy
> CONFIG_NLS=3Dy
> CONFIG_NLS_DEFAULT=3D"iso8859-1"
> CONFIG_NLS_CODEPAGE_437=3Dm
> # CONFIG_NLS_CODEPAGE_737 is not set
> # CONFIG_NLS_CODEPAGE_775 is not set
> # CONFIG_NLS_CODEPAGE_850 is not set
> # CONFIG_NLS_CODEPAGE_852 is not set
> # CONFIG_NLS_CODEPAGE_855 is not set
> # CONFIG_NLS_CODEPAGE_857 is not set
> # CONFIG_NLS_CODEPAGE_860 is not set
> # CONFIG_NLS_CODEPAGE_861 is not set
> # CONFIG_NLS_CODEPAGE_862 is not set
> # CONFIG_NLS_CODEPAGE_863 is not set
> # CONFIG_NLS_CODEPAGE_864 is not set
> CONFIG_NLS_CODEPAGE_865=3Dm
> # CONFIG_NLS_CODEPAGE_866 is not set
> # CONFIG_NLS_CODEPAGE_869 is not set
> # CONFIG_NLS_CODEPAGE_936 is not set
> # CONFIG_NLS_CODEPAGE_950 is not set
> # CONFIG_NLS_CODEPAGE_932 is not set
> # CONFIG_NLS_CODEPAGE_949 is not set
> # CONFIG_NLS_CODEPAGE_874 is not set
> # CONFIG_NLS_ISO8859_8 is not set
> CONFIG_NLS_CODEPAGE_1250=3Dm
> CONFIG_NLS_CODEPAGE_1251=3Dm
> CONFIG_NLS_ASCII=3Dm
> CONFIG_NLS_ISO8859_1=3Dm
> # CONFIG_NLS_ISO8859_2 is not set
> # CONFIG_NLS_ISO8859_3 is not set
> # CONFIG_NLS_ISO8859_4 is not set
> # CONFIG_NLS_ISO8859_5 is not set
> # CONFIG_NLS_ISO8859_6 is not set
> # CONFIG_NLS_ISO8859_7 is not set
> # CONFIG_NLS_ISO8859_9 is not set
> # CONFIG_NLS_ISO8859_13 is not set
> # CONFIG_NLS_ISO8859_14 is not set
> CONFIG_NLS_ISO8859_15=3Dm
> # CONFIG_NLS_KOI8_R is not set
> # CONFIG_NLS_KOI8_U is not set
> CONFIG_NLS_UTF8=3Dm
> # CONFIG_DLM is not set
>=20
> #
> # Kernel hacking
> #
> CONFIG_TRACE_IRQFLAGS_SUPPORT=3Dy
> # CONFIG_PRINTK_TIME is not set
> CONFIG_ENABLE_WARN_DEPRECATED=3Dy
> CONFIG_ENABLE_MUST_CHECK=3Dy
> CONFIG_FRAME_WARN=3D1024
> CONFIG_MAGIC_SYSRQ=3Dy
> # CONFIG_UNUSED_SYMBOLS is not set
> CONFIG_DEBUG_FS=3Dy
> # CONFIG_HEADERS_CHECK is not set
> # CONFIG_DEBUG_KERNEL is not set
> # CONFIG_SLUB_DEBUG_ON is not set
> # CONFIG_SLUB_STATS is not set
> CONFIG_DEBUG_BUGVERBOSE=3Dy
> CONFIG_DEBUG_MEMORY_INIT=3Dy
> CONFIG_ARCH_WANT_FRAME_POINTERS=3Dy
> # CONFIG_FRAME_POINTER is not set
> # CONFIG_RCU_CPU_STALL_DETECTOR is not set
> # CONFIG_LATENCYTOP is not set
> CONFIG_SYSCTL_SYSCALL_CHECK=3Dy
> CONFIG_USER_STACKTRACE_SUPPORT=3Dy
> CONFIG_HAVE_FUNCTION_TRACER=3Dy
> CONFIG_HAVE_FUNCTION_GRAPH_TRACER=3Dy
> CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=3Dy
> CONFIG_HAVE_DYNAMIC_FTRACE=3Dy
> CONFIG_HAVE_FTRACE_MCOUNT_RECORD=3Dy
> CONFIG_HAVE_HW_BRANCH_TRACER=3Dy
>=20
> #
> # Tracers
> #
> # CONFIG_SYSPROF_TRACER is not set
> # CONFIG_HW_BRANCH_TRACER is not set
> # CONFIG_PROVIDE_OHCI1394_DMA_INIT is not set
> # CONFIG_DYNAMIC_PRINTK_DEBUG is not set
> # CONFIG_SAMPLES is not set
> CONFIG_HAVE_ARCH_KGDB=3Dy
> CONFIG_STRICT_DEVMEM=3Dy
> CONFIG_X86_VERBOSE_BOOTUP=3Dy
> CONFIG_EARLY_PRINTK=3Dy
> # CONFIG_EARLY_PRINTK_DBGP is not set
> CONFIG_4KSTACKS=3Dy
> CONFIG_DOUBLEFAULT=3Dy
> CONFIG_HAVE_MMIOTRACE_SUPPORT=3Dy
> CONFIG_IO_DELAY_TYPE_0X80=3D0
> CONFIG_IO_DELAY_TYPE_0XED=3D1
> CONFIG_IO_DELAY_TYPE_UDELAY=3D2
> CONFIG_IO_DELAY_TYPE_NONE=3D3
> CONFIG_IO_DELAY_0X80=3Dy
> # CONFIG_IO_DELAY_0XED is not set
> # CONFIG_IO_DELAY_UDELAY is not set
> # CONFIG_IO_DELAY_NONE is not set
> CONFIG_DEFAULT_IO_DELAY_TYPE=3D0
> # CONFIG_OPTIMIZE_INLINING is not set
>=20
> #
> # Security options
> #
> CONFIG_KEYS=3Dy
> # CONFIG_KEYS_DEBUG_PROC_KEYS is not set
> CONFIG_SECURITY=3Dy
> # CONFIG_SECURITYFS is not set
> CONFIG_SECURITY_NETWORK=3Dy
> # CONFIG_SECURITY_NETWORK_XFRM is not set
> # CONFIG_SECURITY_PATH is not set
> # CONFIG_SECURITY_FILE_CAPABILITIES is not set
> CONFIG_SECURITY_DEFAULT_MMAP_MIN_ADDR=3D0
> CONFIG_SECURITY_SELINUX=3Dy
> CONFIG_SECURITY_SELINUX_BOOTPARAM=3Dy
> CONFIG_SECURITY_SELINUX_BOOTPARAM_VALUE=3D1
> # CONFIG_SECURITY_SELINUX_DISABLE is not set
> CONFIG_SECURITY_SELINUX_DEVELOP=3Dy
> CONFIG_SECURITY_SELINUX_AVC_STATS=3Dy
> CONFIG_SECURITY_SELINUX_CHECKREQPROT_VALUE=3D1
> # CONFIG_SECURITY_SELINUX_POLICYDB_VERSION_MAX is not set
> CONFIG_XOR_BLOCKS=3Dm
> CONFIG_ASYNC_CORE=3Dm
> CONFIG_ASYNC_MEMCPY=3Dm
> CONFIG_ASYNC_XOR=3Dm
> CONFIG_CRYPTO=3Dy
>=20
> #
> # Crypto core or helper
> #
> CONFIG_CRYPTO_FIPS=3Dy
> CONFIG_CRYPTO_ALGAPI=3Dy
> CONFIG_CRYPTO_ALGAPI2=3Dy
> CONFIG_CRYPTO_AEAD=3Dm
> CONFIG_CRYPTO_AEAD2=3Dy
> CONFIG_CRYPTO_BLKCIPHER=3Dm
> CONFIG_CRYPTO_BLKCIPHER2=3Dy
> CONFIG_CRYPTO_HASH=3Dy
> CONFIG_CRYPTO_HASH2=3Dy
> CONFIG_CRYPTO_RNG=3Dm
> CONFIG_CRYPTO_RNG2=3Dy
> CONFIG_CRYPTO_MANAGER=3Dy
> CONFIG_CRYPTO_MANAGER2=3Dy
> CONFIG_CRYPTO_GF128MUL=3Dm
> CONFIG_CRYPTO_NULL=3Dm
> CONFIG_CRYPTO_CRYPTD=3Dm
> CONFIG_CRYPTO_AUTHENC=3Dm
> CONFIG_CRYPTO_TEST=3Dm
>=20
> #
> # Authenticated Encryption with Associated Data
> #
> CONFIG_CRYPTO_CCM=3Dm
> CONFIG_CRYPTO_GCM=3Dm
> CONFIG_CRYPTO_SEQIV=3Dm
>=20
> #
> # Block modes
> #
> CONFIG_CRYPTO_CBC=3Dm
> CONFIG_CRYPTO_CTR=3Dm
> CONFIG_CRYPTO_CTS=3Dm
> CONFIG_CRYPTO_ECB=3Dm
> CONFIG_CRYPTO_LRW=3Dm
> CONFIG_CRYPTO_PCBC=3Dm
> CONFIG_CRYPTO_XTS=3Dm
>=20
> #
> # Hash modes
> #
> CONFIG_CRYPTO_HMAC=3Dy
> CONFIG_CRYPTO_XCBC=3Dm
>=20
> #
> # Digest
> #
> CONFIG_CRYPTO_CRC32C=3Dm
> # CONFIG_CRYPTO_CRC32C_INTEL is not set
> CONFIG_CRYPTO_MD4=3Dm
> CONFIG_CRYPTO_MD5=3Dm
> CONFIG_CRYPTO_MICHAEL_MIC=3Dm
> CONFIG_CRYPTO_RMD128=3Dm
> CONFIG_CRYPTO_RMD160=3Dm
> CONFIG_CRYPTO_RMD256=3Dm
> CONFIG_CRYPTO_RMD320=3Dm
> CONFIG_CRYPTO_SHA1=3Dm
> CONFIG_CRYPTO_SHA256=3Dm
> CONFIG_CRYPTO_SHA512=3Dm
> CONFIG_CRYPTO_TGR192=3Dm
> CONFIG_CRYPTO_WP512=3Dm
>=20
> #
> # Ciphers
> #
> CONFIG_CRYPTO_AES=3Dm
> CONFIG_CRYPTO_AES_586=3Dm
> CONFIG_CRYPTO_ANUBIS=3Dm
> CONFIG_CRYPTO_ARC4=3Dm
> CONFIG_CRYPTO_BLOWFISH=3Dm
> CONFIG_CRYPTO_CAMELLIA=3Dm
> CONFIG_CRYPTO_CAST5=3Dm
> CONFIG_CRYPTO_CAST6=3Dm
> CONFIG_CRYPTO_DES=3Dm
> CONFIG_CRYPTO_FCRYPT=3Dm
> CONFIG_CRYPTO_KHAZAD=3Dm
> CONFIG_CRYPTO_SALSA20=3Dm
> CONFIG_CRYPTO_SALSA20_586=3Dm
> CONFIG_CRYPTO_SEED=3Dm
> CONFIG_CRYPTO_SERPENT=3Dm
> CONFIG_CRYPTO_TEA=3Dm
> CONFIG_CRYPTO_TWOFISH=3Dm
> CONFIG_CRYPTO_TWOFISH_COMMON=3Dm
> CONFIG_CRYPTO_TWOFISH_586=3Dm
>=20
> #
> # Compression
> #
> CONFIG_CRYPTO_DEFLATE=3Dm
> CONFIG_CRYPTO_LZO=3Dm
>=20
> #
> # Random Number Generation
> #
> CONFIG_CRYPTO_ANSI_CPRNG=3Dm
> # CONFIG_CRYPTO_HW is not set
> CONFIG_HAVE_KVM=3Dy
> # CONFIG_VIRTUALIZATION is not set
>=20
> #
> # Library routines
> #
> CONFIG_BITREVERSE=3Dy
> CONFIG_GENERIC_FIND_FIRST_BIT=3Dy
> CONFIG_GENERIC_FIND_NEXT_BIT=3Dy
> CONFIG_GENERIC_FIND_LAST_BIT=3Dy
> CONFIG_CRC_CCITT=3Dm
> CONFIG_CRC16=3Dy
> CONFIG_CRC_T10DIF=3Dm
> CONFIG_CRC_ITU_T=3Dm
> CONFIG_CRC32=3Dy
> CONFIG_CRC7=3Dm
> CONFIG_LIBCRC32C=3Dm
> CONFIG_AUDIT_GENERIC=3Dy
> CONFIG_ZLIB_INFLATE=3Dm
> CONFIG_ZLIB_DEFLATE=3Dm
> CONFIG_LZO_COMPRESS=3Dm
> CONFIG_LZO_DECOMPRESS=3Dm
> CONFIG_PLIST=3Dy
> CONFIG_HAS_IOMEM=3Dy
> CONFIG_HAS_IOPORT=3Dy
> CONFIG_HAS_DMA=3Dy
> Linux version 2.6.29 (root@gere) (gcc version 4.3.2 (Debian 4.3.2-1.1=
) ) #2 SMP Tue Mar 31 09:21:43 CEST 2009
> KERNEL supported cpus:
> Intel GenuineIntel
> AMD AuthenticAMD
> NSC Geode by NSC
> Cyrix CyrixInstead
> Centaur CentaurHauls
> Transmeta GenuineTMx86
> Transmeta TransmetaCPU
> UMC UMC UMC UMC
> BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
> BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000e6000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 000000001fe30000 (usable)
> BIOS-e820: 000000001fe30000 - 000000001fe414a0 (ACPI NVS)
> BIOS-e820: 000000001fe414a0 - 000000001ff30000 (usable)
> BIOS-e820: 000000001ff30000 - 000000001ff40000 (ACPI data)
> BIOS-e820: 000000001ff40000 - 000000001fff0000 (ACPI NVS)
> BIOS-e820: 000000001fff0000 - 0000000020000000 (reserved)
> BIOS-e820: 00000000fecf0000 - 00000000fecf1000 (reserved)
> BIOS-e820: 00000000fed20000 - 00000000feda0000 (reserved)
> DMI 2.3 present.
> last_pfn =3D 0x1ff30 max_arch_pfn =3D 0x1000000
> x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
> kernel direct mapping tables up to 1ff30000 @ 7000-d000
> ACPI: RSDP 000F61A0, 0014 (r0 ACPIAM)
> ACPI: RSDT 1FF30000, 0030 (r1 INTEL S875PWP3 20040429 MSFT 97)
> ACPI: FACP 1FF30200, 0081 (r2 INTEL S875PWP3 20040429 MSFT 97)
> FADT: X_PM1a_EVT_BLK.bit_width (16) does not match PM1_EVT_LEN (4)
> ACPI: DSDT 1FF30370, 424E (r1 INTEL S875PWP3 1 MSFT 100000D)
> ACPI: FACS 1FF40000, 0040
> ACPI: APIC 1FF30300, 0068 (r1 INTEL S875PWP3 20040429 MSFT 97)
> ACPI: WDDT 1FF345C0, 0040 (r1 INTEL OEMWDDT 1 MSFT 100000D)
> ACPI: Local APIC address 0xfee00000
> 511MB LOWMEM available.
> mapped low ram: 0 - 1ff30000
> low ram: 00000000 - 1ff30000
> bootmap 00002000 - 00005fe8
> (8 early reservations) =3D=3D> bootmem [0000000000 - 001ff30000]
> #0 [0000000000 - 0000001000] BIOS data page =3D=3D> [0000000000 -=
0000001000]
> #1 [0000001000 - 0000002000] EX TRAMPOLINE =3D=3D> [0000001000 -=
0000002000]
> #2 [0000006000 - 0000007000] TRAMPOLINE =3D=3D> [0000006000 -=
0000007000]
> #3 [0000100000 - 0000577098] TEXT DATA BSS =3D=3D> [0000100000 -=
0000577098]
> #4 [0000578000 - 000057f000] INIT_PG_TABLE =3D=3D> [0000578000 -=
000057f000]
> #5 [000009dc00 - 0000100000] BIOS reserved =3D=3D> [000009dc00 -=
0000100000]
> #6 [0000007000 - 0000008000] PGTABLE =3D=3D> [0000007000 -=
0000008000]
> #7 [0000002000 - 0000006000] BOOTMAP =3D=3D> [0000002000 -=
0000006000]
> found SMP MP-table at [c00ff780] 000ff780
> Zone PFN ranges:
> DMA 0x00000000 -> 0x00001000
> Normal 0x00001000 -> 0x0001ff30
> Movable zone start PFN for each node
> early_node_map[3] active PFN ranges
> 0: 0x00000000 -> 0x0000009f
> 0: 0x00000100 -> 0x0001fe30
> 0: 0x0001fe42 -> 0x0001ff30
> On node 0 totalpages: 130749
> free_area_init_node: node 0, pgdat c0485f00, node_mem_map c1000000
> DMA zone: 32 pages used for memmap
> DMA zone: 0 pages reserved
> DMA zone: 3967 pages, LIFO batch:0
> Normal zone: 991 pages used for memmap
> Normal zone: 125759 pages, LIFO batch:31
> ACPI: PM-Timer IO Port: 0x408
> ACPI: Local APIC address 0xfee00000
> ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
> ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
> ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
> ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1])
> ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
> IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
> ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
> ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
> ACPI: IRQ0 used by override.
> ACPI: IRQ2 used by override.
> ACPI: IRQ9 used by override.
> Enabling APIC mode: Flat. Using 1 I/O APICs
> Using ACPI (MADT) for SMP configuration information
> SMP: Allowing 2 CPUs, 0 hotplug CPUs
> nr_irqs_gsi: 24
> Allocating PCI resources starting at 30000000 (gap: 20000000:decf0000=
)
> NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:2 nr_node_ids:1
> PERCPU: Allocating 40960 bytes of per cpu data
> Built 1 zonelists in Zone order, mobility grouping on. Total pages: =
129726
> Kernel command line: root=3D/dev/md0 ro=20
> Enabling fast FPU save and restore... done.
> Enabling unmasked SIMD FPU exception support... done.
> Initializing CPU#0
> CPU 0 irqstacks, hard=3Dc0530000 soft=3Dc0510000
> PID hash table entries: 2048 (order: 11, 8192 bytes)
> Fast TSC calibration using PIT
> Detected 2793.205 MHz processor.
> Console: colour VGA+ 80x25
> console [tty0] enabled
> Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
> Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
> Memory: 513512k/523456k available (2662k kernel code, 9212k reserved,=
1162k data, 300k init, 0k highmem)
> virtual kernel memory layout:
> fixmap : 0xffe19000 - 0xfffff000 (1944 kB)
> vmalloc : 0xe0730000 - 0xffe17000 ( 502 MB)
> lowmem : 0xc0000000 - 0xdff30000 ( 511 MB)
> .init : 0xc04c2000 - 0xc050d000 ( 300 kB)
> .data : 0xc039998d - 0xc04bc3a0 (1162 kB)
> .text : 0xc0100000 - 0xc039998d (2662 kB)
> Checking if this processor honours the WP bit even in supervisor mode=
=2E..Ok.
> SLUB: Genslabs=3D12, HWalign=3D128, Order=3D0-3, MinObjects=3D0, CPUs=
=3D2, Nodes=3D1
> Calibrating delay loop (skipped), value calculated using timer freque=
ncy.. 5586.41 BogoMIPS (lpj=3D27932050)
> Security Framework initialized
> SELinux: Initializing.
> SELinux: Starting in permissive mode
> Mount-cache hash table entries: 512
> CPU: Trace cache: 12K uops, L1 D cache: 16K
> CPU: L2 cache: 1024K
> CPU: Physical Processor ID: 0
> CPU: Processor Core ID: 0
> Intel machine check architecture supported.
> Intel machine check reporting enabled on CPU#0.
> CPU0: Intel P4/Xeon Extended MCE MSRs (12) available
> CPU0: Thermal monitoring enabled
> using mwait in idle threads.
> Checking 'hlt' instruction... OK.
> Freeing SMP alternatives: 15k freed
> ACPI: Core revision 20081204
> ..TIMER: vector=3D0x30 apic1=3D0 pin1=3D2 apic2=3D-1 pin2=3D-1
> CPU0: Intel(R) Pentium(R) 4 CPU 2.80GHz stepping 03
> CPU 1 irqstacks, hard=3Dc0531000 soft=3Dc0511000
> Booting processor 1 APIC 0x1 ip 0x6000
> Initializing CPU#1
> Calibrating delay using timer specific routine.. 5586.12 BogoMIPS (lp=
j=3D27930621)
> CPU: Trace cache: 12K uops, L1 D cache: 16K
> CPU: L2 cache: 1024K
> CPU: Physical Processor ID: 0
> CPU: Processor Core ID: 0
> Intel machine check architecture supported.
> Intel machine check reporting enabled on CPU#1.
> CPU1: Intel P4/Xeon Extended MCE MSRs (12) available
> CPU1: Thermal monitoring enabled
> x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106
> CPU1: Intel(R) Pentium(R) 4 CPU 2.80GHz stepping 03
> checking TSC synchronization [CPU#0 -> CPU#1]: passed.
> Brought up 2 CPUs
> Total of 2 processors activated (11172.53 BogoMIPS).
> net_namespace: 728 bytes
> NET: Registered protocol family 16
> ACPI: bus type pci registered
> PCI: PCI BIOS revision 2.10 entry at 0xf0031, last bus=3D3
> PCI: Using configuration type 1 for base access
> bio: create slab <bio-0> at 0
> ACPI: EC: Look up EC in DSDT
> ACPI: Interpreter enabled
> ACPI: (supports S0 S5)
> ACPI: Using IOAPIC for interrupt routing
> ACPI: No dock devices found.
> ACPI: PCI Root Bridge [PCI0] (0000:00)
> pci 0000:00:00.0: reg 10 32bit mmio: [0xf8000000-0xfbffffff]
> pci 0000:00:1d.0: reg 20 io port: [0xcc00-0xcc1f]
> pci 0000:00:1d.1: reg 20 io port: [0xd000-0xd01f]
> pci 0000:00:1d.2: reg 20 io port: [0xd400-0xd41f]
> pci 0000:00:1d.3: reg 20 io port: [0xd800-0xd81f]
> pci 0000:00:1d.7: reg 10 32bit mmio: [0xfebffc00-0xfebfffff]
> pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
> pci 0000:00:1d.7: PME# disabled
> pci 0000:00:1f.0: quirk: region 0400-047f claimed by ICH4 ACPI/GPIO/T=
CO
> pci 0000:00:1f.0: quirk: region 0500-053f claimed by ICH4 GPIO
> pci 0000:00:1f.1: reg 10 io port: [0x00-0x07]
> pci 0000:00:1f.1: reg 14 io port: [0x00-0x03]
> pci 0000:00:1f.1: reg 18 io port: [0x00-0x07]
> pci 0000:00:1f.1: reg 1c io port: [0x00-0x03]
> pci 0000:00:1f.1: reg 20 io port: [0xffa0-0xffaf]
> pci 0000:00:1f.1: reg 24 32bit mmio: [0x000000-0x0003ff]
> pci 0000:00:1f.2: reg 10 io port: [0xec00-0xec07]
> pci 0000:00:1f.2: reg 14 io port: [0xe800-0xe803]
> pci 0000:00:1f.2: reg 18 io port: [0xe400-0xe407]
> pci 0000:00:1f.2: reg 1c io port: [0xe000-0xe003]
> pci 0000:00:1f.2: reg 20 io port: [0xdc00-0xdc0f]
> pci 0000:00:1f.3: reg 20 io port: [0xc800-0xc81f]
> pci 0000:02:01.0: reg 10 32bit mmio: [0xfc8e0000-0xfc8fffff]
> pci 0000:02:01.0: reg 18 io port: [0x9c00-0x9c1f]
> pci 0000:02:01.0: PME# supported from D0 D3hot D3cold
> pci 0000:02:01.0: PME# disabled
> pci 0000:00:03.0: bridge io port: [0x9000-0x9fff]
> pci 0000:00:03.0: bridge 32bit mmio: [0xfc800000-0xfc8fffff]
> pci 0000:03:01.0: reg 10 io port: [0xbc00-0xbc07]
> pci 0000:03:01.0: reg 14 io port: [0xb400-0xb403]
> pci 0000:03:01.0: reg 18 io port: [0xb000-0xb007]
> pci 0000:03:01.0: reg 1c io port: [0xac00-0xac03]
> pci 0000:03:01.0: reg 20 io port: [0xa800-0xa80f]
> pci 0000:03:01.0: reg 24 32bit mmio: [0xfeafec00-0xfeafedff]
> pci 0000:03:01.0: reg 30 32bit mmio: [0xfea00000-0xfea7ffff]
> pci 0000:03:01.0: supports D1 D2
> pci 0000:03:06.0: reg 10 32bit mmio: [0xfd000000-0xfdffffff]
> pci 0000:03:06.0: reg 14 io port: [0xb800-0xb8ff]
> pci 0000:03:06.0: reg 18 32bit mmio: [0xfeaff000-0xfeafffff]
> pci 0000:03:06.0: reg 30 32bit mmio: [0xfeac0000-0xfeadffff]
> pci 0000:03:06.0: supports D1 D2
> pci 0000:03:08.0: reg 10 32bit mmio: [0xfeafd000-0xfeafdfff]
> pci 0000:03:08.0: reg 14 io port: [0xa400-0xa43f]
> pci 0000:03:08.0: supports D1 D2
> pci 0000:03:08.0: PME# supported from D0 D1 D2 D3hot D3cold
> pci 0000:03:08.0: PME# disabled
> pci 0000:00:1e.0: transparent bridge
> pci 0000:00:1e.0: bridge io port: [0xa000-0xbfff]
> pci 0000:00:1e.0: bridge 32bit mmio: [0xfc900000-0xfeafffff]
> pci_bus 0000:00: on NUMA node 0
> ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
> ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
> ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P2._PRT]
> ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P3._PRT]
> ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
> ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
> ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
> ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
> ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
> ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0,=
disabled.
> ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
> ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
> ACPI: Power Resource [URP1] (off)
> ACPI: Power Resource [URP2] (off)
> ACPI: Power Resource [FDDP] (off)
> ACPI: Power Resource [LPTP] (off)
> SCSI subsystem initialized
> libata version 3.00 loaded.
> PCI: Using ACPI for IRQ routing
> pnp: PnP ACPI init
> ACPI: bus type pnp registered
> pnp: PnP ACPI: found 15 devices
> ACPI: ACPI bus type pnp unregistered
> system 00:0b: ioport range 0x4d0-0x4d1 has been reserved
> system 00:0d: ioport range 0x400-0x47f has been reserved
> system 00:0d: ioport range 0x680-0x6ff has been reserved
> system 00:0d: ioport range 0x500-0x53f has been reserved
> system 00:0d: iomem range 0xfec00000-0xfec00fff has been reserved
> system 00:0d: iomem range 0xfee00000-0xfee00fff has been reserved
> system 00:0d: iomem range 0xfed20000-0xfed9ffff has been reserved
> system 00:0e: iomem range 0x0-0x9ffff could not be reserved
> system 00:0e: iomem range 0xc0000-0xdffff could not be reserved
> system 00:0e: iomem range 0xe0000-0xfffff could not be reserved
> system 00:0e: iomem range 0x100000-0x1fffffff could not be reserved
> pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
> pci 0000:00:01.0: IO window: disabled
> pci 0000:00:01.0: MEM window: disabled
> pci 0000:00:01.0: PREFETCH window: disabled
> pci 0000:00:03.0: PCI bridge, secondary bus 0000:02
> pci 0000:00:03.0: IO window: 0x9000-0x9fff
> pci 0000:00:03.0: MEM window: 0xfc800000-0xfc8fffff
> pci 0000:00:03.0: PREFETCH window: disabled
> pci 0000:00:1e.0: PCI bridge, secondary bus 0000:03
> pci 0000:00:1e.0: IO window: 0xa000-0xbfff
> pci 0000:00:1e.0: MEM window: 0xfc900000-0xfeafffff
> pci 0000:00:1e.0: PREFETCH window: 0x00000030000000-0x000000300ffff=
f
> pci 0000:00:1e.0: setting latency timer to 64
> pci_bus 0000:00: resource 0 io: [0x00-0xffff]
> pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff]
> pci_bus 0000:01: resource 0 mem: [0x0-0x0]
> pci_bus 0000:01: resource 1 mem: [0x0-0x0]
> pci_bus 0000:01: resource 2 mem: [0x0-0x0]
> pci_bus 0000:01: resource 3 mem: [0x0-0x0]
> pci_bus 0000:02: resource 0 io: [0x9000-0x9fff]
> pci_bus 0000:02: resource 1 mem: [0xfc800000-0xfc8fffff]
> pci_bus 0000:02: resource 2 mem: [0x0-0x0]
> pci_bus 0000:02: resource 3 mem: [0x0-0x0]
> pci_bus 0000:03: resource 0 io: [0xa000-0xbfff]
> pci_bus 0000:03: resource 1 mem: [0xfc900000-0xfeafffff]
> pci_bus 0000:03: resource 2 mem: [0x30000000-0x300fffff]
> pci_bus 0000:03: resource 3 io: [0x00-0xffff]
> pci_bus 0000:03: resource 4 mem: [0x000000-0xffffffffffffffff]
> NET: Registered protocol family 2
> IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
> TCP established hash table entries: 16384 (order: 5, 131072 bytes)
> TCP bind hash table entries: 16384 (order: 5, 131072 bytes)
> TCP: Hash tables configured (established 16384 bind 16384)
> TCP reno registered
> NET: Registered protocol family 1
> Machine check exception polling timer started.
> audit: initializing netlink socket (disabled)
> type=3D2000 audit(1238485013.629:1): initialized
> msgmni has been set to 1003
> alg: No test for stdrng (krng)
> io scheduler noop registered
> io scheduler anticipatory registered (default)
> pci 0000:03:06.0: Boot video device
> pci 0000:03:08.0: Firmware left e100 interrupts enabled; disabling
> Intel 82802 RNG detected
> Intel(R) PRO/1000 Network Driver - version 7.3.21-k3-NAPI
> Copyright (c) 1999-2006 Intel Corporation.
> e1000 0000:02:01.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
> e1000 0000:02:01.0: setting latency timer to 64
> e1000: 0000:02:01.0: e1000_probe: (PCI:33MHz:32-bit) 00:0c:f1:e8:33:e=
b
> Switched to high resolution mode on CPU 1
> Switched to high resolution mode on CPU 0
> e1000: eth0: e1000_probe: Intel(R) PRO/1000 Network Connection
> Driver 'sd' needs updating - please use bus_type methods
> ata_piix 0000:00:1f.1: version 2.12
> ata_piix 0000:00:1f.1: enabling device (0005 -> 0007)
> ata_piix 0000:00:1f.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18
> ata_piix 0000:00:1f.1: setting latency timer to 64
> scsi0 : ata_piix
> scsi1 : ata_piix
> ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14
> ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15
> ata1.00: ATA-6: WDC WD1200JB-00DUA3, 75.13B75, max UDMA/100
> ata1.00: 234441648 sectors, multi 16: LBA48=20
> ata1.01: ATA-6: WDC WD1200JB-00DUA3, 75.13B75, max UDMA/100
> ata1.01: 234441648 sectors, multi 16: LBA48=20
> ata1.00: configured for UDMA/100
> ata1.01: configured for UDMA/100
> scsi 0:0:0:0: Direct-Access ATA WDC WD1200JB-00D 75.1 PQ: 0 =
ANSI: 5
> sd 0:0:0:0: [sda] 234441648 512-byte hardware sectors: (120 GB/111 Gi=
B)
> sd 0:0:0:0: [sda] Write Protect is off
> sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
> sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't =
support DPO or FUA
> sd 0:0:0:0: [sda] 234441648 512-byte hardware sectors: (120 GB/111 Gi=
B)
> sd 0:0:0:0: [sda] Write Protect is off
> sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
> sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't =
support DPO or FUA
> sda: sda1 sda2 sda3 sda4
> sd 0:0:0:0: [sda] Attached SCSI disk
> scsi 0:0:1:0: Direct-Access ATA WDC WD1200JB-00D 75.1 PQ: 0 =
ANSI: 5
> sd 0:0:1:0: [sdb] 234441648 512-byte hardware sectors: (120 GB/111 Gi=
B)
> sd 0:0:1:0: [sdb] Write Protect is off
> sd 0:0:1:0: [sdb] Mode Sense: 00 3a 00 00
> sd 0:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't =
support DPO or FUA
> sd 0:0:1:0: [sdb] 234441648 512-byte hardware sectors: (120 GB/111 Gi=
B)
> sd 0:0:1:0: [sdb] Write Protect is off
> sd 0:0:1:0: [sdb] Mode Sense: 00 3a 00 00
> sd 0:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't =
support DPO or FUA
> sdb: sdb1 sdb2 sdb3 sdb4
> sd 0:0:1:0: [sdb] Attached SCSI disk
> ata2.00: ATA-6: WDC WD1200JB-00DUA3, 75.13B75, max UDMA/100
> ata2.00: 234441648 sectors, multi 16: LBA48=20
> ata2.01: ATAPI: GCR-8523B, 1.02, max MWDMA2
> ata2.00: configured for UDMA/100
> ata2.01: configured for MWDMA2
> scsi 1:0:0:0: Direct-Access ATA WDC WD1200JB-00D 75.1 PQ: 0 =
ANSI: 5
> sd 1:0:0:0: [sdc] 234441648 512-byte hardware sectors: (120 GB/111 Gi=
B)
> sd 1:0:0:0: [sdc] Write Protect is off
> sd 1:0:0:0: [sdc] Mode Sense: 00 3a 00 00
> sd 1:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't =
support DPO or FUA
> sd 1:0:0:0: [sdc] 234441648 512-byte hardware sectors: (120 GB/111 Gi=
B)
> sd 1:0:0:0: [sdc] Write Protect is off
> sd 1:0:0:0: [sdc] Mode Sense: 00 3a 00 00
> sd 1:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't =
support DPO or FUA
> sdc: sdc1 sdc2 sdc3 sdc4
> sd 1:0:0:0: [sdc] Attached SCSI disk
> scsi 1:0:1:0: CD-ROM HL-DT-ST CD-ROM GCR-8523B 1.02 PQ: 0 =
ANSI: 5
> ata_piix 0000:00:1f.2: PCI INT A -> GSI 18 (level, low) -> IRQ 18
> ata_piix 0000:00:1f.2: MAP [ P0 -- P1 -- ]
> ata_piix 0000:00:1f.2: setting latency timer to 64
> scsi2 : ata_piix
> scsi3 : ata_piix
> ata3: SATA max UDMA/133 cmd 0xec00 ctl 0xe800 bmdma 0xdc00 irq 18
> ata4: SATA max UDMA/133 cmd 0xe400 ctl 0xe000 bmdma 0xdc08 irq 18
> ata3.00: ATA-7: ST3250823AS, 3.03, max UDMA/133
> ata3.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 0/32)
> ata3.00: configured for UDMA/133
> scsi 2:0:0:0: Direct-Access ATA ST3250823AS 3.03 PQ: 0 =
ANSI: 5
> sd 2:0:0:0: [sdd] 488397168 512-byte hardware sectors: (250 GB/232 Gi=
B)
> sd 2:0:0:0: [sdd] Write Protect is off
> sd 2:0:0:0: [sdd] Mode Sense: 00 3a 00 00
> sd 2:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't =
support DPO or FUA
> sd 2:0:0:0: [sdd] 488397168 512-byte hardware sectors: (250 GB/232 Gi=
B)
> sd 2:0:0:0: [sdd] Write Protect is off
> sd 2:0:0:0: [sdd] Mode Sense: 00 3a 00 00
> sd 2:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't =
support DPO or FUA
> sdd: sdd1
> sd 2:0:0:0: [sdd] Attached SCSI disk
> ata4.00: ATA-7: ST3250823AS, 3.03, max UDMA/133
> ata4.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 0/32)
> ata4.00: configured for UDMA/133
> scsi 3:0:0:0: Direct-Access ATA ST3250823AS 3.03 PQ: 0 =
ANSI: 5
> sd 3:0:0:0: [sde] 488397168 512-byte hardware sectors: (250 GB/232 Gi=
B)
> sd 3:0:0:0: [sde] Write Protect is off
> sd 3:0:0:0: [sde] Mode Sense: 00 3a 00 00
> sd 3:0:0:0: [sde] Write cache: enabled, read cache: enabled, doesn't =
support DPO or FUA
> sd 3:0:0:0: [sde] 488397168 512-byte hardware sectors: (250 GB/232 Gi=
B)
> sd 3:0:0:0: [sde] Write Protect is off
> sd 3:0:0:0: [sde] Mode Sense: 00 3a 00 00
> sd 3:0:0:0: [sde] Write cache: enabled, read cache: enabled, doesn't =
support DPO or FUA
> sde: sde1
> sd 3:0:0:0: [sde] Attached SCSI disk
> sata_sil 0000:03:01.0: version 2.4
> sata_sil 0000:03:01.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
> scsi4 : sata_sil
> scsi5 : sata_sil
> ata5: SATA max UDMA/100 mmio m512@0xfeafec00 tf 0xfeafec80 irq 22
> ata6: SATA max UDMA/100 mmio m512@0xfeafec00 tf 0xfeafecc0 irq 22
> ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
> ata5.00: ATA-7: ST3750640AS, 3.AAE, max UDMA/133
> ata5.00: 1465149168 sectors, multi 0: LBA48 NCQ (depth 0/32)
> ata5.00: configured for UDMA/100
> scsi 4:0:0:0: Direct-Access ATA ST3750640AS 3.AA PQ: 0 =
ANSI: 5
> sd 4:0:0:0: [sdf] 1465149168 512-byte hardware sectors: (750 GB/698 G=
iB)
> sd 4:0:0:0: [sdf] Write Protect is off
> sd 4:0:0:0: [sdf] Mode Sense: 00 3a 00 00
> sd 4:0:0:0: [sdf] Write cache: enabled, read cache: enabled, doesn't =
support DPO or FUA
> sd 4:0:0:0: [sdf] 1465149168 512-byte hardware sectors: (750 GB/698 G=
iB)
> sd 4:0:0:0: [sdf] Write Protect is off
> sd 4:0:0:0: [sdf] Mode Sense: 00 3a 00 00
> sd 4:0:0:0: [sdf] Write cache: enabled, read cache: enabled, doesn't =
support DPO or FUA
> sdf: sdf1
> sd 4:0:0:0: [sdf] Attached SCSI disk
> ata6: SATA link down (SStatus 0 SControl 310)
> PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,1=
2
> serio: i8042 KBD port at 0x60,0x64 irq 1
> serio: i8042 AUX port at 0x60,0x64 irq 12
> mice: PS/2 mouse device common for all mice
> i801_smbus 0000:00:1f.3: PCI INT B -> GSI 17 (level, low) -> IRQ 17
> input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0=
/input/input0
> md: raid1 personality registered for level 1
> EDAC MC: Ver: 2.1.0 Mar 31 2009
> EDAC i82875p: i82875p init one
> pci 0000:00:06.0: reg 10 32bit mmio: [0xfecf0000-0xfecf0fff]
> pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
> pci 0000:00:01.0: IO window: disabled
> pci 0000:00:01.0: MEM window: disabled
> pci 0000:00:01.0: PREFETCH window: disabled
> pci 0000:00:03.0: PCI bridge, secondary bus 0000:02
> pci 0000:00:03.0: IO window: 0x9000-0x9fff
> pci 0000:00:03.0: MEM window: 0xfc800000-0xfc8fffff
> pci 0000:00:03.0: PREFETCH window: disabled
> pci 0000:00:1e.0: PCI bridge, secondary bus 0000:03
> pci 0000:00:1e.0: IO window: 0xa000-0xbfff
> pci 0000:00:1e.0: MEM window: 0xfc900000-0xfeafffff
> pci 0000:00:1e.0: PREFETCH window: 0x00000030000000-0x000000300ffff=
f
> EDAC MC0: Giving out device to 'i82875p_edac' 'i82875p': DEV 0000:00:=
00.0
> EDAC PCI0: Giving out device to module 'i82875p_edac' controller 'EDA=
C PCI controller': DEV '0000:00:00.0' (POLLED)
> cpuidle: using governor ladder
> cpuidle: using governor menu
> TCP cubic registered
> NET: Registered protocol family 10
> NET: Registered protocol family 17
> Using IPI Shortcut mode
> md: Waiting for all devices to be available before autodetect
> md: If you don't use raid, use raid=3Dnoautodetect
> md: Autodetecting RAID arrays.
> md: Scanned 14 and added 14 devices.
> md: autorun ...
> md: considering sde1 ...
> md: adding sde1 ...
> md: adding sdd1 ...
> md: sdc4 has different UUID to sde1
> md: sdc3 has different UUID to sde1
> md: sdc2 has different UUID to sde1
> md: sdc1 has different UUID to sde1
> md: sdb4 has different UUID to sde1
> md: sdb3 has different UUID to sde1
> md: sdb2 has different UUID to sde1
> md: sdb1 has different UUID to sde1
> md: sda4 has different UUID to sde1
> md: sda3 has different UUID to sde1
> md: sda2 has different UUID to sde1
> md: sda1 has different UUID to sde1
> md: created md3
> md: bind<sdd1>
> md: bind<sde1>
> md: running: <sde1><sdd1>
> raid1: raid set md3 active with 2 out of 2 mirrors
> md: considering sdc4 ...
> md: adding sdc4 ...
> md: sdc3 has different UUID to sdc4
> md: sdc2 has different UUID to sdc4
> md: sdc1 has different UUID to sdc4
> md: adding sdb4 ...
> md: sdb3 has different UUID to sdc4
> md: sdb2 has different UUID to sdc4
> md: sdb1 has different UUID to sdc4
> md: adding sda4 ...
> md: sda3 has different UUID to sdc4
> md: sda2 has different UUID to sdc4
> md: sda1 has different UUID to sdc4
> md: created md2
> md: bind<sda4>
> md: bind<sdb4>
> md: bind<sdc4>
> md: running: <sdc4><sdb4><sda4>
> raid1: raid set md2 active with 2 out of 2 mirrors
> md: considering sdc3 ...
> md: adding sdc3 ...
> md: sdc2 has different UUID to sdc3
> md: sdc1 has different UUID to sdc3
> md: adding sdb3 ...
> md: sdb2 has different UUID to sdc3
> md: sdb1 has different UUID to sdc3
> md: adding sda3 ...
> md: sda2 has different UUID to sdc3
> md: sda1 has different UUID to sdc3
> md: created md1
> md: bind<sda3>
> md: bind<sdb3>
> md: bind<sdc3>
> md: running: <sdc3><sdb3><sda3>
> raid1: raid set md1 active with 2 out of 2 mirrors
> md: considering sdc2 ...
> md: adding sdc2 ...
> md: sdc1 has different UUID to sdc2
> md: adding sdb2 ...
> md: sdb1 has different UUID to sdc2
> md: adding sda2 ...
> md: sda1 has different UUID to sdc2
> md: created md4
> md: bind<sda2>
> md: bind<sdb2>
> md: bind<sdc2>
> md: running: <sdc2><sdb2><sda2>
> raid1: raid set md4 active with 2 out of 2 mirrors
> md: considering sdc1 ...
> md: adding sdc1 ...
> md: adding sdb1 ...
> md: adding sda1 ...
> md: created md0
> md: bind<sda1>
> md: bind<sdb1>
> md: bind<sdc1>
> md: running: <sdc1><sdb1><sda1>
> raid1: raid set md0 active with 2 out of 2 mirrors
> md: ... autorun DONE.
> md0:
> kjournald starting. Commit interval 5 seconds
> EXT3-fs: mounted filesystem with ordered data mode.
> VFS: Mounted root (ext3 filesystem) readonly on device 9:0.
> Freeing unused kernel memory: 300k freed
> md4: unknown partition table
> Adding 248888k swap on /dev/md4. Priority:1 extents:1 across:248888k=
=20
> EXT3 FS on md0, internal journal
> md1: unknown partition table
> md2: unknown partition table
> md3: unknown partition table
> fuse init (API version 7.11)
> kjournald starting. Commit interval 5 seconds
> EXT3 FS on md1, internal journal
> EXT3-fs: mounted filesystem with ordered data mode.
> kjournald starting. Commit interval 5 seconds
> EXT3 FS on md2, internal journal
> EXT3-fs: mounted filesystem with ordered data mode.
> kjournald starting. Commit interval 5 seconds
> EXT3 FS on md3, internal journal
> EXT3-fs: mounted filesystem with ordered data mode.
> kjournald starting. Commit interval 5 seconds
> EXT3 FS on sdf1, internal journal
> EXT3-fs: mounted filesystem with ordered data mode.
> ADDRCONF(NETDEV_UP): eth0: link is not ready
> e1000: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX
> ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
> RPC: Registered udp transport module.
> RPC: Registered tcp transport module.
> Installing knfsd (copyright (C) 1996 okir-pn4DOG8n3UYbFoVRYvo4fw@public.gmane.org).
> platform microcode: firmware: requesting intel-ucode/0f-03-03
> platform microcode: firmware: requesting intel-ucode/0f-03-03
> Microcode Update Driver: v2.00 <tigran-ppwZ4lME3+KI6QP4U9MhSdBc4/FLrbF6@public.gmane.org>, Peter O=
ruba
> microcode: CPU0 updated from revision 0x9 to 0xc, date =3D 2005-04-21=
=20
> microcode: CPU1 updated from revision 0x9 to 0xc, date =3D 2005-04-21=
=20
> parport_pc 00:0a: reported by Plug and Play ACPI
> parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE,EPP]
> lp0: using parport0 (interrupt-driven).
> warning: `ntpd' uses 32-bit capabilities (legacy support in use)
> BUG: unable to handle kernel NULL pointer dereference at 00000004
> IP: [<c022f288>] inode_has_perm+0x1f/0x69
> *pdpt =3D 0000000015a0e001 *pde =3D 0000000000000000=20
> Oops: 0000 [#1] SMP=20
> last sysfs file: /sys/devices/pci0000:00/0000:00:1f.3/i2c-adapter/i2c=
-0/0-002e/temp3_alarm
> Modules linked in: parport_pc lp parport autofs4 microcode nfsd expor=
tfs nfs lockd nfs_acl sunrpc fuse
>=20
> Pid: 2604, comm: nfsd Not tainted (2.6.29 #2) =20
> EIP: 0060:[<c022f288>] EFLAGS: 00010246 CPU: 0
> EIP is at inode_has_perm+0x1f/0x69
> EAX: 00000000 EBX: 00000000 ECX: 00000004 EDX: cd45fd30
> ESI: df3aa280 EDI: cd45fd30 EBP: df3aa280 ESP: dac6fe24
> DS: 007b ES: 007b FS: 00d8 GS: 0000 SS: 0068
> Process nfsd (pid: 2604, ti=3Ddac6f000 task=3Ddf36c6e0 task.ti=3Ddac6=
f000)
> Stack:
> 00000020 00000018 00000004 d597dd6c dac59000 c0166888 d597dd00 df3aa=
2ec
> d597dd6c c0231e95 c046cfa0 00000246 00000042 e08c393a df7e1dd0 c5646=
480
> 00000000 00000004 d59bdf00 cd45fd30 df3aa280 c0231f5a 00000000 00000=
001
> Call Trace:
> [<c0166888>] kmemdup+0x16/0x30
> [<c0231e95>] selinux_cred_prepare+0x10/0x22
> [<e08c393a>] nfsd_permission+0x88/0xf2 [nfsd]
> [<c0231f5a>] selinux_dentry_open+0xb3/0xe5
> [<c022a769>] security_dentry_open+0xc/0xd
> [<c017bf5e>] __dentry_open+0x9f/0x23a
> [<c017c130>] dentry_open+0x37/0x7f
> [<e08c5035>] nfsd_open+0xe6/0x14e [nfsd]
> [<e08c52d4>] nfsd_commit+0x34/0x91 [nfsd]
> [<e07ffee6>] cache_check+0x2b/0x3f6 [sunrpc]
> [<e08cae07>] nfsd3_proc_commit+0x94/0x10f [nfsd]
> [<e07fbc8c>] svcauth_unix_accept+0x1c1/0x273 [sunrpc]
> [<e08c01d3>] nfsd_dispatch+0x97/0x209 [nfsd]
> [<e07f8b04>] svc_process+0x3e8/0x707 [sunrpc]
> [<c01035a7>] common_interrupt+0x27/0x2c
> [<e08c0829>] nfsd+0x16c/0x26a [nfsd]
> [<c011b198>] complete+0x37/0x46
> [<e08c06bd>] nfsd+0x0/0x26a [nfsd]
> [<c0136376>] kthread+0x39/0x62
> [<c013633d>] kthread+0x0/0x62
> [<c010380b>] kernel_thread_helper+0x7/0x1c
> Code: 00 e8 f4 e4 ff ff 83 c4 08 5b 5e c3 55 57 56 53 83 ec 44 89 c6 =
89 4c 24 08 8b 5c 24 58 31 c0 f6 82 39 01 00 00 02 75 29 8b 46 58 <8b> =
68 04 8b b2 40 01 00 00 85 db 74 21 0f b7 4e 14 8b 56 10 89=20
> EIP: [<c022f288>] inode_has_perm+0x1f/0x69 SS:ESP 0068:dac6fe24
> ---[ end trace 2545eed1715071f5 ]---
> BUG: unable to handle kernel NULL pointer dereference at 00000004
> IP: [<c022f288>] inode_has_perm+0x1f/0x69
> *pdpt =3D 0000000015a0e001 *pde =3D 0000000000000000=20
> Oops: 0000 [#2] SMP=20
> last sysfs file: /sys/devices/pci0000:00/0000:00:1f.3/i2c-adapter/i2c=
-0/0-002e/temp3_alarm
> Modules linked in: parport_pc lp parport autofs4 microcode nfsd expor=
tfs nfs lockd nfs_acl sunrpc fuse
>=20
> Pid: 2605, comm: nfsd Tainted: G D (2.6.29 #2) =20
> EIP: 0060:[<c022f288>] EFLAGS: 00010246 CPU: 0
> EIP is at inode_has_perm+0x1f/0x69
> EAX: 00000000 EBX: 00000000 ECX: 00000004 EDX: cd45e280
> ESI: df3aa100 EDI: cd45e280 EBP: df3aa100 ESP: dac92e24
> DS: 007b ES: 007b FS: 00d8 GS: 0000 SS: 0068
> Process nfsd (pid: 2605, ti=3Ddac92000 task=3Ddf36d130 task.ti=3Ddac9=
2000)
> Stack:
> 00000020 00000018 00000004 d597d66c dac5d000 c0166888 d597d600 df3aa=
16c
> d597d66c c0231e95 c046cfa0 00000246 00000042 e08c393a df7e16e8 c5646=
480
> 00000000 00000004 d5943f00 cd45e280 df3aa100 c0231f5a 00000000 00000=
001
> Call Trace:
> [<c0166888>] kmemdup+0x16/0x30
> [<c0231e95>] selinux_cred_prepare+0x10/0x22
> [<e08c393a>] nfsd_permission+0x88/0xf2 [nfsd]
> [<c0231f5a>] selinux_dentry_open+0xb3/0xe5
> [<c022a769>] security_dentry_open+0xc/0xd
> [<c017bf5e>] __dentry_open+0x9f/0x23a
> [<c017c130>] dentry_open+0x37/0x7f
> [<e08c5035>] nfsd_open+0xe6/0x14e [nfsd]
> [<e08c52d4>] nfsd_commit+0x34/0x91 [nfsd]
> [<e07ffee6>] cache_check+0x2b/0x3f6 [sunrpc]
> [<e08cae07>] nfsd3_proc_commit+0x94/0x10f [nfsd]
> [<e07fbc8c>] svcauth_unix_accept+0x1c1/0x273 [sunrpc]
> [<e08c01d3>] nfsd_dispatch+0x97/0x209 [nfsd]
> [<e07f8b04>] svc_process+0x3e8/0x707 [sunrpc]
> [<c01035a7>] common_interrupt+0x27/0x2c
> [<e08c0829>] nfsd+0x16c/0x26a [nfsd]
> [<c011b198>] complete+0x37/0x46
> [<e08c06bd>] nfsd+0x0/0x26a [nfsd]
> [<c0136376>] kthread+0x39/0x62
> [<c013633d>] kthread+0x0/0x62
> [<c010380b>] kernel_thread_helper+0x7/0x1c
> Code: 00 e8 f4 e4 ff ff 83 c4 08 5b 5e c3 55 57 56 53 83 ec 44 89 c6 =
89 4c 24 08 8b 5c 24 58 31 c0 f6 82 39 01 00 00 02 75 29 8b 46 58 <8b> =
68 04 8b b2 40 01 00 00 85 db 74 21 0f b7 4e 14 8b 56 10 89=20
> EIP: [<c022f288>] inode_has_perm+0x1f/0x69 SS:ESP 0068:dac92e24
> ---[ end trace 2545eed1715071f6 ]---
^ permalink raw reply [flat|nested] 4+ messages in thread