From: Anna Schumaker <bjschuma@netapp.com>
To: "J. Bruce Fields" <bfields@fieldses.org>
Cc: <linux-nfs@vger.kernel.org>
Subject: Re: [PATCH 4/4] NFSD: Implement SEEK
Date: Tue, 29 Oct 2013 08:53:06 -0400 [thread overview]
Message-ID: <526FAFB2.8040300@netapp.com> (raw)
In-Reply-To: <20131028215126.GP31322@fieldses.org>
On Mon 28 Oct 2013 05:51:26 PM EDT, J. Bruce Fields wrote:
> On Mon, Oct 28, 2013 at 10:57:26AM -0400, Anna Schumaker wrote:
>> This patch adds in the SEEK operation used by clients doing an llseek on
>> a file to find either hole or data sections in a file. I'm faking the
>> "allocated" status right now, since I haven't quite figured out how to
>> tell if a range is allocated on disk yet.
>>
>> This patch is missing correctly determining the "allocated" status of
>> the HOLE / DATA range. I expect I'll need to learn all about how fiemap
>> works before properly setting these values.
>>
>> Signed-off-by: Anna Schumaker <bjschuma@netapp.com>
>> ---
>> fs/nfsd/nfs4proc.c | 44 ++++++++++++++++++++++++++++++++++++++++++++
>> fs/nfsd/nfs4xdr.c | 40 ++++++++++++++++++++++++++++++++++++++--
>> fs/nfsd/xdr4.h | 15 +++++++++++++++
>> include/linux/nfs4.h | 2 +-
>> 4 files changed, 98 insertions(+), 3 deletions(-)
>>
>> diff --git a/fs/nfsd/nfs4proc.c b/fs/nfsd/nfs4proc.c
>> index 3210c6f..bc45ed2 100644
>> --- a/fs/nfsd/nfs4proc.c
>> +++ b/fs/nfsd/nfs4proc.c
>> @@ -1064,6 +1064,45 @@ nfsd4_write_plus(struct svc_rqst *rqstp, struct nfsd4_compound_state *cstate,
>> return nfserr_union_notsupp;
>> }
>>
>> +static __be32
>> +nfsd4_seek(struct svc_rqst *rqstp, struct nfsd4_compound_state *cstate,
>> + struct nfsd4_seek *seek)
>> +{
>> + struct file *file;
>> + loff_t pos, end_pos;
>> + __be32 status;
>> +
>> + status = nfs4_preprocess_stateid_op(SVC_NET(rqstp), cstate,
>> + &seek->seek_stateid,
>> + RD_STATE | WR_STATE, &file);
>
> Note nfs4_preprocess_stateid_op requires the caller to hold the state
> lock. Andyou want to either hold it till you're done using "file" or
> take a reference on file before dropping it.
That's useful to know. I'll fix it up here, and anywhere else I call
nfs4_preprocess_stateid_op()!
>
> --b.
>
>> + if (status != nfs_ok)
>> + return status;
>> +
>> + if (seek->seek_whence == NFS4_CONTENT_DATA) {
>> + pos = vfs_llseek(file, seek->seek_offset, SEEK_DATA);
>> + end_pos = vfs_llseek(file, pos, SEEK_HOLE);
>> + seek->seek_allocated = true;
>> + } else {
>> + pos = vfs_llseek(file, seek->seek_offset, SEEK_HOLE);
>> + end_pos = vfs_llseek(file, pos, SEEK_DATA);
>> + seek->seek_allocated = false;
>> + }
>> +
>> + if (pos < 0)
>> + return nfserrno(pos);
>> + else if (end_pos == -ENXIO) {
>> + seek->seek_length = 0;
>> + seek->seek_eof = true;
>> + } else if (end_pos < 0)
>> + return nfserrno(end_pos);
>> + else
>> + seek->seek_length = end_pos - pos;
>> +
>> + seek->seek_offset = pos;
>> +
>> + return nfs_ok;
>> +}
>> +
>> /* This routine never returns NFS_OK! If there are no other errors, it
>> * will return NFSERR_SAME or NFSERR_NOT_SAME depending on whether the
>> * attributes matched. VERIFY is implemented by mapping NFSERR_SAME
>> @@ -1885,6 +1924,11 @@ static struct nfsd4_operation nfsd4_ops[] = {
>> .op_rsize_bop = (nfsd4op_rsize)nfsd4_write_rsize,
>> .op_get_currentstateid = (stateid_getter)nfsd4_get_writestateid,
>> },
>> +
>> + [OP_SEEK] = {
>> + .op_func = (nfsd4op_func)nfsd4_seek,
>> + .op_name = "OP_SEEK",
>> + },
>> };
>>
>> #ifdef NFSD_DEBUG
>> diff --git a/fs/nfsd/nfs4xdr.c b/fs/nfsd/nfs4xdr.c
>> index 1e4e9af..8434740 100644
>> --- a/fs/nfsd/nfs4xdr.c
>> +++ b/fs/nfsd/nfs4xdr.c
>> @@ -1511,6 +1511,22 @@ nfsd4_decode_write_plus(struct nfsd4_compoundargs *argp,
>> }
>>
>> static __be32
>> +nfsd4_decode_seek(struct nfsd4_compoundargs *argp, struct nfsd4_seek *seek)
>> +{
>> + DECODE_HEAD;
>> +
>> + status = nfsd4_decode_stateid(argp, &seek->seek_stateid);
>> + if (status)
>> + return status;
>> +
>> + READ_BUF(12);
>> + READ64(seek->seek_offset);
>> + READ32(seek->seek_whence);
>> +
>> + DECODE_TAIL;
>> +}
>> +
>> +static __be32
>> nfsd4_decode_noop(struct nfsd4_compoundargs *argp, void *p)
>> {
>> return nfs_ok;
>> @@ -1693,7 +1709,7 @@ static nfsd4_dec nfsd42_dec_ops[] = {
>> [OP_OFFLOAD_STATUS] = (nfsd4_dec)nfsd4_decode_notsupp,
>> [OP_WRITE_PLUS] = (nfsd4_dec)nfsd4_decode_write_plus,
>> [OP_READ_PLUS] = (nfsd4_dec)nfsd4_decode_notsupp,
>> - [OP_SEEK] = (nfsd4_dec)nfsd4_decode_notsupp,
>> + [OP_SEEK] = (nfsd4_dec)nfsd4_decode_seek,
>> [OP_IO_ADVISE] = (nfsd4_dec)nfsd4_decode_notsupp,
>> };
>>
>> @@ -3650,6 +3666,26 @@ nfsd4_encode_write_plus(struct nfsd4_compoundres *resp, __be32 nfserr,
>> }
>>
>> static __be32
>> +nfsd4_encode_seek(struct nfsd4_compoundres *resp, __be32 nfserr,
>> + struct nfsd4_seek *seek)
>> +{
>> + __be32 *p;
>> +
>> + if (nfserr)
>> + return nfserr;
>> +
>> + RESERVE_SPACE(28);
>> + WRITE32(seek->seek_eof);
>> + WRITE32(seek->seek_whence);
>> + WRITE64(seek->seek_offset);
>> + WRITE64(seek->seek_length);
>> + WRITE32(seek->seek_allocated);
>> + ADJUST_ARGS();
>> +
>> + return nfserr;
>> +}
>> +
>> +static __be32
>> nfsd4_encode_noop(struct nfsd4_compoundres *resp, __be32 nfserr, void *p)
>> {
>> return nfserr;
>> @@ -3730,7 +3766,7 @@ static nfsd4_enc nfsd4_enc_ops[] = {
>> [OP_OFFLOAD_STATUS] = (nfsd4_enc)nfsd4_encode_noop,
>> [OP_WRITE_PLUS] = (nfsd4_enc)nfsd4_encode_write_plus,
>> [OP_READ_PLUS] = (nfsd4_enc)nfsd4_encode_noop,
>> - [OP_SEEK] = (nfsd4_enc)nfsd4_encode_noop,
>> + [OP_SEEK] = (nfsd4_enc)nfsd4_encode_seek,
>> [OP_IO_ADVISE] = (nfsd4_enc)nfsd4_encode_noop,
>> };
>>
>> diff --git a/fs/nfsd/xdr4.h b/fs/nfsd/xdr4.h
>> index aaef9ab..ae9debc 100644
>> --- a/fs/nfsd/xdr4.h
>> +++ b/fs/nfsd/xdr4.h
>> @@ -451,6 +451,20 @@ struct nfsd4_write_plus {
>> struct nfsd42_write_res wp_res;
>> };
>>
>> +struct nfsd4_seek {
>> + /* request */
>> + stateid_t seek_stateid;
>> +
>> + /* Shared between request and response */
>> + u64 seek_offset;
>> + u32 seek_whence;
>> +
>> + /* response */
>> + u32 seek_eof;
>> + u64 seek_length;
>> + u32 seek_allocated;
>> +};
>> +
>> struct nfsd4_op {
>> int opnum;
>> __be32 status;
>> @@ -499,6 +513,7 @@ struct nfsd4_op {
>>
>> /* NFSv4.2 */
>> struct nfsd4_write_plus write_plus;
>> + struct nfsd4_seek seek;
>> } u;
>> struct nfs4_replay * replay;
>> };
>> diff --git a/include/linux/nfs4.h b/include/linux/nfs4.h
>> index 55ed991..81d6b09 100644
>> --- a/include/linux/nfs4.h
>> +++ b/include/linux/nfs4.h
>> @@ -128,7 +128,7 @@ enum nfs_opnum4 {
>> Needs to be updated if more operations are defined in future.*/
>>
>> #define FIRST_NFS4_OP OP_ACCESS
>> -#define LAST_NFS4_OP OP_WRITE_PLUS
>> +#define LAST_NFS4_OP OP_SEEK
>>
>> enum nfsstat4 {
>> NFS4_OK = 0,
>> --
>> 1.8.4.1
>>
next prev parent reply other threads:[~2013-10-29 12:53 UTC|newest]
Thread overview: 70+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-10-28 14:57 [PATCH 0/4] NFSD: Add support for WRITE_PLUS and SEEK Anna Schumaker
2013-10-28 14:57 ` [PATCH 1/4] NFSD: Update error codes Anna Schumaker
2013-10-28 14:57 ` [PATCH 2/4] NFSD: Create nfs v4.2 decode ops Anna Schumaker
2013-10-28 20:54 ` J. Bruce Fields
2013-10-28 20:59 ` Myklebust, Trond
2013-10-28 21:11 ` J. Bruce Fields
2013-10-29 12:43 ` Anna Schumaker
2013-10-29 13:33 ` J. Bruce Fields
2013-10-28 14:57 ` [PATCH 3/4] NFSD: Add WRITE_PLUS support for hole punches Anna Schumaker
2013-10-28 21:40 ` J. Bruce Fields
2013-10-29 12:49 ` Anna Schumaker
2013-10-29 13:34 ` J. Bruce Fields
2013-10-29 12:50 ` Anna Schumaker
2013-10-29 13:06 ` J. Bruce Fields
2013-10-29 13:11 ` Anna Schumaker
2013-10-29 13:23 ` Myklebust, Trond
2013-10-29 13:28 ` Anna Schumaker
2013-10-29 13:32 ` Dr Fields James Bruce
2013-11-02 13:54 ` Christoph Hellwig
2013-11-02 14:44 ` J. Bruce Fields
2013-11-02 14:51 ` Christoph Hellwig
2013-11-02 15:02 ` Myklebust, Trond
2013-11-02 15:07 ` Christoph Hellwig
2013-11-02 15:20 ` Christoph Hellwig
2013-11-02 13:52 ` Christoph Hellwig
2013-11-04 16:41 ` Anna Schumaker
2013-11-04 17:03 ` Christoph Hellwig
2013-11-04 17:23 ` Anna Schumaker
2013-11-04 18:53 ` Christoph Hellwig
2013-11-04 18:57 ` Anna Schumaker
2013-11-04 19:16 ` Chuck Lever
2013-11-04 19:19 ` Christoph Hellwig
2013-11-04 19:50 ` Chuck Lever
2013-11-04 19:54 ` Christoph Hellwig
2013-11-04 19:55 ` J. Bruce Fields
2013-11-04 20:03 ` Haynes, Tom
2013-11-04 20:13 ` Christoph Hellwig
2013-11-05 9:40 ` Christoph Hellwig
2013-11-05 14:23 ` Anna Schumaker
2013-11-05 15:11 ` Christoph Hellwig
2013-10-28 14:57 ` [PATCH 4/4] NFSD: Implement SEEK Anna Schumaker
2013-10-28 21:51 ` J. Bruce Fields
2013-10-29 12:53 ` Anna Schumaker [this message]
2013-10-29 7:35 ` Christoph Hellwig
2013-10-29 13:00 ` Anna Schumaker
2013-10-29 13:07 ` Christoph Hellwig
2013-10-29 13:30 ` J. Bruce Fields
2013-11-02 13:48 ` Christoph Hellwig
2013-11-02 14:37 ` J. Bruce Fields
2013-11-02 14:41 ` Christoph Hellwig
2013-11-04 16:46 ` J. Bruce Fields
2013-11-04 17:05 ` Christoph Hellwig
2013-11-04 17:22 ` Chuck Lever
2013-11-05 12:33 ` Christoph Hellwig
2013-11-04 21:56 ` Thomas Haynes
2013-11-05 1:03 ` Christoph Hellwig
2013-11-05 2:07 ` Haynes, Tom
2013-11-05 8:23 ` Christoph Hellwig
2013-10-31 16:04 ` Christoph Hellwig
2013-10-31 16:07 ` Anna Schumaker
2013-10-31 16:17 ` Anna Schumaker
2013-10-31 17:13 ` Christoph Hellwig
2013-10-28 14:57 ` [RFC 5/4] NFSD: Add basic CB_OFFLOAD support Anna Schumaker
2013-10-28 21:52 ` J. Bruce Fields
2013-10-29 7:37 ` Christoph Hellwig
2013-10-29 13:36 ` J. Bruce Fields
2013-10-29 13:38 ` Christoph Hellwig
2013-10-29 13:53 ` J. Bruce Fields
2013-10-29 15:11 ` Christoph Hellwig
2013-10-28 20:00 ` [PATCH 0/4] NFSD: Add support for WRITE_PLUS and SEEK Christoph Hellwig
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=526FAFB2.8040300@netapp.com \
--to=bjschuma@netapp.com \
--cc=bfields@fieldses.org \
--cc=linux-nfs@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).