From: Chuck Lever <chuck.lever@oracle.com>
To: Benjamin Coddington <bcodding@redhat.com>
Cc: Jeff Layton <jlayton@kernel.org>, Neil Brown <neilb@suse.de>,
Olga Kornievskaia <okorniev@redhat.com>,
Dai Ngo <Dai.Ngo@oracle.com>, Tom Talpey <tom@talpey.com>,
Steven Rostedt <rostedt@goodmis.org>,
Masami Hiramatsu <mhiramat@kernel.org>,
Mathieu Desnoyers <mathieu.desnoyers@efficios.com>,
Trond Myklebust <trondmy@kernel.org>,
Anna Schumaker <anna@kernel.org>,
"David S. Miller" <davem@davemloft.net>,
Eric Dumazet <edumazet@google.com>,
Jakub Kicinski <kuba@kernel.org>, Paolo Abeni <pabeni@redhat.com>,
Simon Horman <horms@kernel.org>,
Mike Snitzer <snitzer@kernel.org>,
linux-nfs@vger.kernel.org, linux-kernel@vger.kernel.org,
linux-trace-kernel@vger.kernel.org, netdev@vger.kernel.org
Subject: Re: [PATCH 1/2] nfsd: use threads array as-is in netlink interface
Date: Fri, 13 Jun 2025 11:38:43 -0400 [thread overview]
Message-ID: <64c216db-57c8-4486-bd40-1d6135478487@oracle.com> (raw)
In-Reply-To: <6D3B09C4-0E35-4A98-8C29-C2EDDBD17163@redhat.com>
On 6/13/25 11:23 AM, Benjamin Coddington wrote:
> On 13 Jun 2025, at 10:56, Chuck Lever wrote:
>
>> On 6/13/25 7:33 AM, Benjamin Coddington wrote:
>>> We don't consider it acceptable to allow known defects to persist in our
>>> products just because they are bleeding edge.
>>
>> I'm not letting this issue persist. Proper testing takes time.
>>
>> The patch description and discussion around this change did not include
>> any information about its pervasiveness and only a little about its
>> severity. I used my best judgement and followed my usual rules, which
>> are:
>>
>> 1. Crashers, data corrupters, and security bugs with public bug reports
>> and confirmed fix effectiveness go in as quickly as we can test.
>> Note well that we have to balance the risk of introducing regressions
>> in this case, since going in quickly means the fix lacks significant
>> test experience.
>>
>> 1a. Rashes and bug bites require application of topical hydrocortisone.
>
> :) no rash here, this response is very soothing.
>
>> 2. Patches sit in nfsd-testing for at least two weeks; better if they
>> are there for four. I have CI running daily on that branch, and
>> sometimes it takes a while for a problem to surface and be noticed.
>>
>> 3. Patches should sit in nfsd-next or nfsd-fixes for at least as long
>> as it takes for them to matriculate into linux-next and fs-next.
>>
>> 4. If the patch fixes an issue that was introduced in the most recent
>> merge window, it goes in -fixes .
>>
>> 5. If the patch fixes an issue that is already in released kernels
>> (and we are at rule 5 because the patch does not fix an immediate
>> issue) then it goes in -next .
>>
>> These evidence-oriented guidelines are in place to ensure that we don't
>> panic and rush commits into the kernel without careful review and
>> testing. There have been plenty of times when a fix that was pushed
>> urgently was not complete or even made things worse. It's a long
>> pipeline on purpose.
>
> I totally understand, thanks very much for having a set of rules and
> guidelines and even more for taking the time to spell them out here.
Apologies for the length. I wanted to get these out in the open just
so you and others can slap me with a clue bat if I'm doing something
vastly strange or inappropriate.
> I wanted to express that Red Hat does consider all of its releases to be
> important to fix and maintain. I'd like to speak against arguments about fix
> urgency based on distro versions. I think in this case we innocently crept
> into these arguments as Jeff presented evidence that the problem exists in
> the wild.
I was estimating pervasiveness based on the position of the RHEL 10
distro in its life cycle, nothing more.
>> The issues with this patch were:
>>
>> - It was posted very late in the dev cycle for v6.16. (Jeff's urgent
>> fixes always seem to happen during -rc7 ;-)
>>
>> - The Fixes: tag refers to a commit that was several releases ago, and
>> I am not aware of specific reports of anyone hitting a similar issue.
>>
>> - IME, the adoption of enterprise distributions is slow. RHEL 10 is
>> still only on its GA release. Therefore my estimation is that the
>> number of potentially impacted customers will be small for some time,
>> enough time for us to test Jeff's fix appropriately.
>
> While this is true, I hope we can still treat every release version equally
> /if/ we make any arguments about urgency based on what's currently released
> in a particular distro. Your point is a good counter-arguement to Jeff's
> assertion that the problem has been widely distributed - but it does start
> to creep into a space which feels like we're treating certain early versions
> of a specific distro differently and didn't sit well for me. I'd rather not
> have our upstream work or decisions appear to favor a particular distro.
Understood. I hope I convinced you that I was merely making an evidence-
based estimation about the pervasiveness of any problem this patch might
have been attempting to address.
The shorthand term "bleeding edge" was not intended to be disrespectful,
only descriptive.
--
Chuck Lever
next prev parent reply other threads:[~2025-06-13 15:39 UTC|newest]
Thread overview: 19+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-05-28 0:12 [PATCH 0/2] nfsd: use threads array as-is in netlink thread set interface Jeff Layton
2025-05-28 0:12 ` [PATCH 1/2] nfsd: use threads array as-is in netlink interface Jeff Layton
2025-05-28 17:07 ` Simon Horman
2025-06-12 15:57 ` Jeff Layton
2025-06-12 16:05 ` Chuck Lever
2025-06-12 16:15 ` Jeff Layton
2025-06-12 16:42 ` Chuck Lever
2025-06-13 11:33 ` Benjamin Coddington
2025-06-13 14:56 ` Chuck Lever
2025-06-13 15:23 ` Benjamin Coddington
2025-06-13 15:38 ` Chuck Lever [this message]
2025-06-13 21:05 ` Jeff Layton
2025-06-13 18:57 ` Mike Snitzer
2025-06-13 19:00 ` Chuck Lever
2025-05-28 0:12 ` [PATCH 2/2] sunrpc: new tracepoints around svc thread wakeups Jeff Layton
2025-05-28 17:13 ` Simon Horman
2025-05-28 18:11 ` [PATCH 0/2] nfsd: use threads array as-is in netlink thread set interface cel
2025-05-28 18:22 ` Jeff Layton
2025-05-28 18:25 ` Chuck Lever
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=64c216db-57c8-4486-bd40-1d6135478487@oracle.com \
--to=chuck.lever@oracle.com \
--cc=Dai.Ngo@oracle.com \
--cc=anna@kernel.org \
--cc=bcodding@redhat.com \
--cc=davem@davemloft.net \
--cc=edumazet@google.com \
--cc=horms@kernel.org \
--cc=jlayton@kernel.org \
--cc=kuba@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-nfs@vger.kernel.org \
--cc=linux-trace-kernel@vger.kernel.org \
--cc=mathieu.desnoyers@efficios.com \
--cc=mhiramat@kernel.org \
--cc=neilb@suse.de \
--cc=netdev@vger.kernel.org \
--cc=okorniev@redhat.com \
--cc=pabeni@redhat.com \
--cc=rostedt@goodmis.org \
--cc=snitzer@kernel.org \
--cc=tom@talpey.com \
--cc=trondmy@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox