From: Jeff Layton <jlayton@kernel.org>
To: Mike Snitzer <snitzer@kernel.org>, Chuck Lever <chuck.lever@oracle.com>
Cc: linux-nfs@vger.kernel.org
Subject: Re: [PATCH v5 3/7] NFSD: add io_cache_read controls to debugfs interface
Date: Fri, 08 Aug 2025 08:05:07 -0400 [thread overview]
Message-ID: <c57877a2007cb6e629cd5a7e8c69fedc028caa89.camel@kernel.org> (raw)
In-Reply-To: <20250807162544.17191-4-snitzer@kernel.org>
On Thu, 2025-08-07 at 12:25 -0400, Mike Snitzer wrote:
> Add 'io_cache_read' to NFSD's debugfs interface so that: Any data
> read by NFSD will either be:
> - cached using page cache (NFSD_IO_BUFFERED=1)
> - cached but removed from the page cache upon completion
> (NFSD_IO_DONTCACHE=2).
> - not cached (NFSD_IO_DIRECT=3)
>
> io_cache_read may be set by writing to:
> /sys/kernel/debug/nfsd/io_cache_read
>
> If NFSD_IO_DONTCACHE is specified using 2, FOP_DONTCACHE must be
> advertised as supported by the underlying filesystem (e.g. XFS),
> otherwise all IO flagged with RWF_DONTCACHE will fail with
> -EOPNOTSUPP.
>
> If NFSD_IO_DIRECT is specified using 3, the IO must be aligned
> relative to the underlying block device's logical_block_size. Also the
> memory buffer used to store the read must be aligned relative to the
> underlying block device's dma_alignment.
>
Ditto here. Looks like this falls back to buffered I/O until patch #6?
> Signed-off-by: Mike Snitzer <snitzer@kernel.org>
> ---
> fs/nfsd/debugfs.c | 58 +++++++++++++++++++++++++++++++++++++++++++++++
> fs/nfsd/nfsd.h | 9 ++++++++
> fs/nfsd/vfs.c | 19 +++++++++++++---
> 3 files changed, 83 insertions(+), 3 deletions(-)
>
> diff --git a/fs/nfsd/debugfs.c b/fs/nfsd/debugfs.c
> index 84b0c8b559dc9..c07f71d4e84f4 100644
> --- a/fs/nfsd/debugfs.c
> +++ b/fs/nfsd/debugfs.c
> @@ -27,11 +27,66 @@ static int nfsd_dsr_get(void *data, u64 *val)
> static int nfsd_dsr_set(void *data, u64 val)
> {
> nfsd_disable_splice_read = (val > 0) ? true : false;
> + if (!nfsd_disable_splice_read) {
> + /*
> + * Cannot use NFSD_IO_DONTCACHE or NFSD_IO_DIRECT
> + * if splice_read is enabled.
> + */
> + nfsd_io_cache_read = NFSD_IO_BUFFERED;
> + }
> return 0;
> }
>
> DEFINE_DEBUGFS_ATTRIBUTE(nfsd_dsr_fops, nfsd_dsr_get, nfsd_dsr_set, "%llu\n");
>
> +/*
> + * /sys/kernel/debug/nfsd/io_cache_read
> + *
> + * Contents:
> + * %1: NFS READ will use buffered IO
> + * %2: NFS READ will use dontcache (buffered IO w/ dropbehind)
> + * %3: NFS READ will use direct IO
> + *
> + * The default value of this setting is zero (UNSPECIFIED).
> + * This setting takes immediate effect for all NFS versions,
> + * all exports, and in all NFSD net namespaces.
> + */
> +
> +static int nfsd_io_cache_read_get(void *data, u64 *val)
> +{
> + *val = nfsd_io_cache_read;
> + return 0;
> +}
> +
> +static int nfsd_io_cache_read_set(void *data, u64 val)
> +{
> + int ret = 0;
> +
> + switch (val) {
> + case NFSD_IO_BUFFERED:
> + nfsd_io_cache_read = NFSD_IO_BUFFERED;
> + break;
> + case NFSD_IO_DONTCACHE:
> + case NFSD_IO_DIRECT:
> + /*
> + * Must disable splice_read when enabling
> + * NFSD_IO_DONTCACHE or NFSD_IO_DIRECT.
> + */
> + nfsd_disable_splice_read = true;
> + nfsd_io_cache_read = val;
> + break;
> + default:
> + nfsd_io_cache_read = NFSD_IO_UNSPECIFIED;
> + ret = -EINVAL;
> + break;
> + }
> +
> + return ret;
> +}
> +
> +DEFINE_DEBUGFS_ATTRIBUTE(nfsd_io_cache_read_fops, nfsd_io_cache_read_get,
> + nfsd_io_cache_read_set, "%llu\n");
> +
> void nfsd_debugfs_exit(void)
> {
> debugfs_remove_recursive(nfsd_top_dir);
> @@ -44,4 +99,7 @@ void nfsd_debugfs_init(void)
>
> debugfs_create_file("disable-splice-read", S_IWUSR | S_IRUGO,
> nfsd_top_dir, NULL, &nfsd_dsr_fops);
> +
> + debugfs_create_file("io_cache_read", S_IWUSR | S_IRUGO,
> + nfsd_top_dir, NULL, &nfsd_io_cache_read_fops);
> }
> diff --git a/fs/nfsd/nfsd.h b/fs/nfsd/nfsd.h
> index 1cd0bed57bc2f..6ef799405145f 100644
> --- a/fs/nfsd/nfsd.h
> +++ b/fs/nfsd/nfsd.h
> @@ -153,6 +153,15 @@ static inline void nfsd_debugfs_exit(void) {}
>
> extern bool nfsd_disable_splice_read __read_mostly;
>
> +enum {
> + NFSD_IO_UNSPECIFIED = 0,
> + NFSD_IO_BUFFERED,
> + NFSD_IO_DONTCACHE,
> + NFSD_IO_DIRECT,
> +};
> +
> +extern u64 nfsd_io_cache_read __read_mostly;
> +
> extern int nfsd_max_blksize;
>
> static inline int nfsd_v4client(struct svc_rqst *rq)
> diff --git a/fs/nfsd/vfs.c b/fs/nfsd/vfs.c
> index 79439ad93880a..26b6d96258711 100644
> --- a/fs/nfsd/vfs.c
> +++ b/fs/nfsd/vfs.c
> @@ -49,6 +49,7 @@
> #define NFSDDBG_FACILITY NFSDDBG_FILEOP
>
> bool nfsd_disable_splice_read __read_mostly;
> +u64 nfsd_io_cache_read __read_mostly;
>
> /**
> * nfserrno - Map Linux errnos to NFS errnos
> @@ -1099,17 +1100,29 @@ __be32 nfsd_iter_read(struct svc_rqst *rqstp, struct svc_fh *fhp,
> size_t len;
>
> init_sync_kiocb(&kiocb, file);
> +
> + if (nfsd_io_cache_read == NFSD_IO_DIRECT) {
> + /* Verify ondisk DIO alignment, memory addrs checked below */
> + if (nf->nf_dio_mem_align && nf->nf_dio_read_offset_align &&
> + (((offset | *count) & (nf->nf_dio_read_offset_align - 1)) == 0))
> + kiocb.ki_flags = IOCB_DIRECT;
> + } else if (nfsd_io_cache_read == NFSD_IO_DONTCACHE)
> + kiocb.ki_flags = IOCB_DONTCACHE;
> +
> kiocb.ki_pos = offset;
>
> v = 0;
> total = *count;
> while (total) {
> len = min_t(size_t, total, PAGE_SIZE - base);
> - bvec_set_page(&rqstp->rq_bvec[v], *(rqstp->rq_next_page++),
> - len, base);
> + bvec_set_page(&rqstp->rq_bvec[v], *(rqstp->rq_next_page++), len, base);
> + /* No need to verify memory is DIO-aligned since bv_offset is 0 */
> + if (unlikely((kiocb.ki_flags & IOCB_DIRECT) && base &&
> + (base & (nf->nf_dio_mem_align - 1))))
> + kiocb.ki_flags &= ~IOCB_DIRECT;
> total -= len;
> - ++v;
> base = 0;
> + v++;
> }
> WARN_ON_ONCE(v > rqstp->rq_maxpages);
>
--
Jeff Layton <jlayton@kernel.org>
next prev parent reply other threads:[~2025-08-08 12:05 UTC|newest]
Thread overview: 25+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-08-07 16:25 [PATCH v5 0/7] NFSD: add "NFSD DIRECT" and "NFSD DONTCACHE" IO modes Mike Snitzer
2025-08-07 16:25 ` [PATCH v5 1/7] NFSD: filecache: add STATX_DIOALIGN and STATX_DIO_READ_ALIGN support Mike Snitzer
2025-08-08 11:49 ` Jeff Layton
2025-08-07 16:25 ` [PATCH v5 2/7] NFSD: pass nfsd_file to nfsd_iter_read() Mike Snitzer
2025-08-08 11:51 ` Jeff Layton
2025-08-07 16:25 ` [PATCH v5 3/7] NFSD: add io_cache_read controls to debugfs interface Mike Snitzer
2025-08-08 12:05 ` Jeff Layton [this message]
2025-08-08 12:05 ` Jeff Layton
2025-08-08 17:58 ` Chuck Lever
2025-08-07 16:25 ` [PATCH v5 4/7] NFSD: add io_cache_write " Mike Snitzer
2025-08-08 12:03 ` Jeff Layton
2025-08-08 17:58 ` Chuck Lever
2025-08-08 18:10 ` Mike Snitzer
2025-08-07 16:25 ` [PATCH v5 5/7] NFSD: filecache: only get DIO alignment attrs if NFSD_IO_DIRECT enabled Mike Snitzer
2025-08-08 12:05 ` Jeff Layton
2025-08-08 17:59 ` Chuck Lever
2025-08-08 18:12 ` Mike Snitzer
2025-08-07 16:25 ` [PATCH v5 6/7] NFSD: issue READs using O_DIRECT even if IO is misaligned Mike Snitzer
2025-08-08 12:16 ` Jeff Layton
2025-08-08 17:59 ` Chuck Lever
2025-08-08 18:19 ` Mike Snitzer
2025-08-07 16:25 ` [PATCH v5 7/7] NFSD: issue WRITEs " Mike Snitzer
2025-08-08 2:30 ` Mike Snitzer
2025-08-08 14:21 ` Chuck Lever
2025-08-08 12:20 ` Jeff Layton
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=c57877a2007cb6e629cd5a7e8c69fedc028caa89.camel@kernel.org \
--to=jlayton@kernel.org \
--cc=chuck.lever@oracle.com \
--cc=linux-nfs@vger.kernel.org \
--cc=snitzer@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).