Linux-NVDIMM Archive on lore.kernel.org
 help / color / mirror / Atom feed
From: Ross Zwisler <ross.zwisler@linux.intel.com>
To: linux-kernel@vger.kernel.org
Cc: Ross Zwisler <ross.zwisler@linux.intel.com>,
	Alexander Viro <viro@zeniv.linux.org.uk>,
	Andrew Morton <akpm@linux-foundation.org>,
	Dan Williams <dan.j.williams@intel.com>,
	Dave Chinner <david@fromorbit.com>, Jan Kara <jack@suse.com>,
	Matthew Wilcox <willy@linux.intel.com>,
	linux-fsdevel@vger.kernel.org, linux-nvdimm@lists.01.org
Subject: [PATCH 2/2] dax: fix bdev NULL pointer dereferences
Date: Thu, 28 Jan 2016 12:35:04 -0700	[thread overview]
Message-ID: <1454009704-25959-2-git-send-email-ross.zwisler@linux.intel.com> (raw)
In-Reply-To: <1454009704-25959-1-git-send-email-ross.zwisler@linux.intel.com>

There are a number of places in dax.c that look up the struct block_device
associated with an inode.  Previously this was done by just using
inode->i_sb->s_bdev.  This is correct for inodes that exist within the
filesystems supported by DAX (ext2, ext4 & XFS), but when running DAX
against raw block devices this value is NULL.  This causes NULL pointer
dereferences when these block_device pointers are used.

Instead, for raw block devices we need to look up the struct block_device
using I_BDEV().  This patch fixes all the block_device lookups in dax.c so
that they work properly for both filesystems and raw block devices.

Signed-off-by: Ross Zwisler <ross.zwisler@linux.intel.com>
---
 fs/dax.c | 15 +++++++++------
 1 file changed, 9 insertions(+), 6 deletions(-)

diff --git a/fs/dax.c b/fs/dax.c
index 4fd6b0c..e60a5a7 100644
--- a/fs/dax.c
+++ b/fs/dax.c
@@ -32,6 +32,9 @@
 #include <linux/pfn_t.h>
 #include <linux/sizes.h>
 
+#define DAX_BDEV(inode) (S_ISBLK(inode->i_mode) ? I_BDEV(inode) \
+				: inode->i_sb->s_bdev)
+
 static long dax_map_atomic(struct block_device *bdev, struct blk_dax_ctl *dax)
 {
 	struct request_queue *q = bdev->bd_queue;
@@ -65,7 +68,7 @@ static void dax_unmap_atomic(struct block_device *bdev,
  */
 int dax_clear_blocks(struct inode *inode, sector_t block, long _size)
 {
-	struct block_device *bdev = inode->i_sb->s_bdev;
+	struct block_device *bdev = DAX_BDEV(inode);
 	struct blk_dax_ctl dax = {
 		.sector = block << (inode->i_blkbits - 9),
 		.size = _size,
@@ -246,7 +249,7 @@ ssize_t dax_do_io(struct kiocb *iocb, struct inode *inode,
 	loff_t end = pos + iov_iter_count(iter);
 
 	memset(&bh, 0, sizeof(bh));
-	bh.b_bdev = inode->i_sb->s_bdev;
+	bh.b_bdev = DAX_BDEV(inode);
 
 	if ((flags & DIO_LOCKING) && iov_iter_rw(iter) == READ) {
 		struct address_space *mapping = inode->i_mapping;
@@ -468,7 +471,7 @@ int dax_writeback_mapping_range(struct address_space *mapping, loff_t start,
 		loff_t end)
 {
 	struct inode *inode = mapping->host;
-	struct block_device *bdev = inode->i_sb->s_bdev;
+	struct block_device *bdev = DAX_BDEV(inode);
 	pgoff_t start_index, end_index, pmd_index;
 	pgoff_t indices[PAGEVEC_SIZE];
 	struct pagevec pvec;
@@ -608,7 +611,7 @@ int __dax_fault(struct vm_area_struct *vma, struct vm_fault *vmf,
 
 	memset(&bh, 0, sizeof(bh));
 	block = (sector_t)vmf->pgoff << (PAGE_SHIFT - blkbits);
-	bh.b_bdev = inode->i_sb->s_bdev;
+	bh.b_bdev = DAX_BDEV(inode);
 	bh.b_size = PAGE_SIZE;
 
  repeat:
@@ -827,7 +830,7 @@ int __dax_pmd_fault(struct vm_area_struct *vma, unsigned long address,
 	}
 
 	memset(&bh, 0, sizeof(bh));
-	bh.b_bdev = inode->i_sb->s_bdev;
+	bh.b_bdev = DAX_BDEV(inode);
 	block = (sector_t)pgoff << (PAGE_SHIFT - blkbits);
 
 	bh.b_size = PMD_SIZE;
@@ -1080,7 +1083,7 @@ int dax_zero_page_range(struct inode *inode, loff_t from, unsigned length,
 	BUG_ON((offset + length) > PAGE_CACHE_SIZE);
 
 	memset(&bh, 0, sizeof(bh));
-	bh.b_bdev = inode->i_sb->s_bdev;
+	bh.b_bdev = DAX_BDEV(inode);
 	bh.b_size = PAGE_CACHE_SIZE;
 	err = get_block(inode, index, &bh, 0);
 	if (err < 0)
-- 
2.5.0

  reply	other threads:[~2016-01-28 19:35 UTC|newest]

Thread overview: 3+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-01-28 19:35 [PATCH 1/2] block: fix pfn_mkwrite() DAX fault handler Ross Zwisler
2016-01-28 19:35 ` Ross Zwisler [this message]
2016-01-28 20:21   ` [PATCH 2/2] dax: fix bdev NULL pointer dereferences Dan Williams

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1454009704-25959-2-git-send-email-ross.zwisler@linux.intel.com \
    --to=ross.zwisler@linux.intel.com \
    --cc=akpm@linux-foundation.org \
    --cc=dan.j.williams@intel.com \
    --cc=david@fromorbit.com \
    --cc=jack@suse.com \
    --cc=linux-fsdevel@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-nvdimm@lists.01.org \
    --cc=viro@zeniv.linux.org.uk \
    --cc=willy@linux.intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox