From: Jan Kara <jack@suse.cz>
To: linux-ext4@vger.kernel.org
Cc: linux-fsdevel@vger.kernel.org, Dave Chinner <david@fromorbit.com>,
Jan Kara <jack@suse.cz>, Ted Tso <tytso@mit.edu>,
linux-nvdimm@lists.01.org
Subject: [PATCH 03/11] ext4: Let S_DAX set only if DAX is really supported
Date: Tue, 1 Nov 2016 22:06:13 +0100 [thread overview]
Message-ID: <1478034381-19037-4-git-send-email-jack@suse.cz> (raw)
In-Reply-To: <1478034381-19037-1-git-send-email-jack@suse.cz>
Currently we have S_DAX set inode->i_flags for a regular file whenever
ext4 is mounted with dax mount option. However in some cases we cannot
really do DAX - e.g. when inode is marked to use data journalling, when
inode data is being encrypted, or when inode is stored inline. Make sure
S_DAX flag is appropriately set/cleared in these cases.
Signed-off-by: Jan Kara <jack@suse.cz>
---
fs/ext4/inline.c | 10 ++++++++++
fs/ext4/inode.c | 9 ++++++++-
fs/ext4/super.c | 5 +++++
3 files changed, 23 insertions(+), 1 deletion(-)
diff --git a/fs/ext4/inline.c b/fs/ext4/inline.c
index f74d5ee2cdec..c29678965c3c 100644
--- a/fs/ext4/inline.c
+++ b/fs/ext4/inline.c
@@ -299,6 +299,11 @@ static int ext4_create_inline_data(handle_t *handle,
EXT4_I(inode)->i_inline_size = len + EXT4_MIN_INLINE_DATA_SIZE;
ext4_clear_inode_flag(inode, EXT4_INODE_EXTENTS);
ext4_set_inode_flag(inode, EXT4_INODE_INLINE_DATA);
+ /*
+ * Propagate changes to inode->i_flags as well - e.g. S_DAX may
+ * get cleared
+ */
+ ext4_set_inode_flags(inode);
get_bh(is.iloc.bh);
error = ext4_mark_iloc_dirty(handle, inode, &is.iloc);
@@ -442,6 +447,11 @@ static int ext4_destroy_inline_data_nolock(handle_t *handle,
}
}
ext4_clear_inode_flag(inode, EXT4_INODE_INLINE_DATA);
+ /*
+ * Propagate changes to inode->i_flags as well - e.g. S_DAX may
+ * get set.
+ */
+ ext4_set_inode_flags(inode);
get_bh(is.iloc.bh);
error = ext4_mark_iloc_dirty(handle, inode, &is.iloc);
diff --git a/fs/ext4/inode.c b/fs/ext4/inode.c
index 9eb1f89201ed..4cbd1b24c237 100644
--- a/fs/ext4/inode.c
+++ b/fs/ext4/inode.c
@@ -4350,7 +4350,9 @@ void ext4_set_inode_flags(struct inode *inode)
new_fl |= S_NOATIME;
if (flags & EXT4_DIRSYNC_FL)
new_fl |= S_DIRSYNC;
- if (test_opt(inode->i_sb, DAX) && S_ISREG(inode->i_mode))
+ if (test_opt(inode->i_sb, DAX) && S_ISREG(inode->i_mode) &&
+ !ext4_should_journal_data(inode) && !ext4_has_inline_data(inode) &&
+ !ext4_encrypted_inode(inode))
new_fl |= S_DAX;
inode_set_flags(inode, new_fl,
S_SYNC|S_APPEND|S_IMMUTABLE|S_NOATIME|S_DIRSYNC|S_DAX);
@@ -5618,6 +5620,11 @@ int ext4_change_inode_journal_flag(struct inode *inode, int val)
ext4_clear_inode_flag(inode, EXT4_INODE_JOURNAL_DATA);
}
ext4_set_aops(inode);
+ /*
+ * Update inode->i_flags after EXT4_INODE_JOURNAL_DATA was updated.
+ * E.g. S_DAX may get cleared / set.
+ */
+ ext4_set_inode_flags(inode);
jbd2_journal_unlock_updates(journal);
percpu_up_write(&sbi->s_journal_flag_rwsem);
diff --git a/fs/ext4/super.c b/fs/ext4/super.c
index 6db81fbcbaa6..c83d6f1cfab8 100644
--- a/fs/ext4/super.c
+++ b/fs/ext4/super.c
@@ -1125,6 +1125,10 @@ static int ext4_set_context(struct inode *inode, const void *ctx, size_t len,
ext4_set_inode_flag(inode, EXT4_INODE_ENCRYPT);
ext4_clear_inode_state(inode,
EXT4_STATE_MAY_INLINE_DATA);
+ /*
+ * Update inode->i_flags - e.g. S_DAX may get disabled
+ */
+ ext4_set_inode_flags(inode);
}
return res;
}
@@ -1139,6 +1143,7 @@ static int ext4_set_context(struct inode *inode, const void *ctx, size_t len,
len, 0);
if (!res) {
ext4_set_inode_flag(inode, EXT4_INODE_ENCRYPT);
+ /* Update inode->i_flags - e.g. S_DAX may get disabled */
res = ext4_mark_inode_dirty(handle, inode);
if (res)
EXT4_ERROR_INODE(inode, "Failed to mark inode dirty");
--
2.6.6
_______________________________________________
Linux-nvdimm mailing list
Linux-nvdimm@lists.01.org
https://lists.01.org/mailman/listinfo/linux-nvdimm
next prev parent reply other threads:[~2016-11-01 21:22 UTC|newest]
Thread overview: 26+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-11-01 21:06 [PATCH 0/11] ext4: Convert ext4 DAX IO to iomap framework Jan Kara
2016-11-01 21:06 ` [PATCH 01/11] ext4: Factor out checks from ext4_file_write_iter() Jan Kara
2016-11-03 21:04 ` Ross Zwisler
2016-11-04 4:20 ` Jan Kara
2016-11-01 21:06 ` [PATCH 02/11] ext4: Allow unaligned unlocked DAX IO Jan Kara
[not found] ` <1478034381-19037-3-git-send-email-jack-AlSwsSmVLrQ@public.gmane.org>
2016-11-02 14:27 ` Christoph Hellwig
2016-11-03 23:55 ` Jan Kara
2016-11-01 21:06 ` Jan Kara [this message]
2016-11-01 21:06 ` [PATCH 04/11] ext4: Convert DAX reads to iomap infrastructure Jan Kara
2016-11-01 21:06 ` [PATCH 05/11] ext4: Use iomap for zeroing blocks in DAX mode Jan Kara
2016-11-01 21:06 ` [PATCH 06/11] ext4: DAX iomap write support Jan Kara
2016-11-01 21:06 ` [PATCH 07/11] ext4: Avoid split extents for DAX writes Jan Kara
2016-11-01 21:06 ` [PATCH 08/11] ext4: Convert DAX faults to iomap infrastructure Jan Kara
2016-11-02 14:30 ` Christoph Hellwig
[not found] ` <20161102143006.GB18387-wEGCiKHe2LqWVfeAwA7xHQ@public.gmane.org>
2016-11-04 0:02 ` Jan Kara
2016-11-01 21:06 ` [PATCH 09/11] ext4: Rip out DAX handling from direct IO path Jan Kara
2016-11-01 21:06 ` [PATCH 10/11] ext2: Use iomap_zero_range() for zeroing truncated page in DAX path Jan Kara
2016-11-01 21:06 ` [PATCH 11/11] dax: Rip out get_block based IO support Jan Kara
[not found] ` <1478034381-19037-12-git-send-email-jack-AlSwsSmVLrQ@public.gmane.org>
2016-11-02 14:31 ` Christoph Hellwig
2016-11-04 0:03 ` Jan Kara
2016-11-01 22:12 ` [PATCH 0/11] ext4: Convert ext4 DAX IO to iomap framework Dave Chinner
2016-11-01 22:45 ` Ross Zwisler
2016-11-01 23:09 ` Jan Kara
2016-11-02 13:03 ` Theodore Ts'o
2016-11-02 22:23 ` Dave Chinner
[not found] ` <20161102130353.nt3oqodrik4hnfk6-AKGzg7BKzIDYtjvyW6yDsg@public.gmane.org>
2016-11-04 0:55 ` Jan Kara
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1478034381-19037-4-git-send-email-jack@suse.cz \
--to=jack@suse.cz \
--cc=david@fromorbit.com \
--cc=linux-ext4@vger.kernel.org \
--cc=linux-fsdevel@vger.kernel.org \
--cc=linux-nvdimm@lists.01.org \
--cc=tytso@mit.edu \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).