From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: from mga02.intel.com (mga02.intel.com [134.134.136.20]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by ml01.01.org (Postfix) with ESMTPS id 3396D21B02845 for ; Fri, 13 Jul 2018 14:32:29 -0700 (PDT) From: "Verma, Vishal L" Subject: Re: [ndctl PATCH v12 2/5] ndctl, monitor: add main ndctl monitor configuration file Date: Fri, 13 Jul 2018 21:32:16 +0000 Message-ID: <1531517533.7574.152.camel@intel.com> References: <20180713155403.30020-1-qi.fuli@jp.fujitsu.com> <20180713155403.30020-3-qi.fuli@jp.fujitsu.com> In-Reply-To: <20180713155403.30020-3-qi.fuli@jp.fujitsu.com> Content-Language: en-US Content-ID: <57C19919247DD841B422BA42A3D31673@intel.com> MIME-Version: 1.0 List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Errors-To: linux-nvdimm-bounces@lists.01.org Sender: "Linux-nvdimm" To: "linux-nvdimm@lists.01.org" , "qi.fuli@jp.fujitsu.com" Cc: "tokunaga.keiich@jp.fujitsu.com" List-ID: On Sat, 2018-07-14 at 00:54 +0900, QI Fuli wrote: > This patch adds the main configuration file(/etc/ndctl/monitor.conf) > of ndctl monitor. It contains the configuration directives that give > ndctl monitor instructions. Users can change the configuration by > editing this file or using [--config-file] option to override this > file. The changed value will work after restart ndctl monitor service. > > Signed-off-by: QI Fuli > --- > ndctl.spec.in | 1 + > ndctl/Makefile.am | 5 +++ > ndctl/monitor.c | 110 +++++++++++++++++++++++++++++++++++++++++++++ > ndctl/monitor.conf | 41 +++++++++++++++++ > 4 files changed, 157 insertions(+) > create mode 100644 ndctl/monitor.conf > > diff --git a/ndctl.spec.in b/ndctl.spec.in > index e2c879c..42760fa 100644 > --- a/ndctl.spec.in > +++ b/ndctl.spec.in > @@ -141,6 +141,7 @@ make check > %{_includedir}/ndctl/ > %{_libdir}/libndctl.so > %{_libdir}/pkgconfig/libndctl.pc > +%{_sysconfdir}/ndctl/monitor.conf > > %files -n DAX_DNAME > %defattr(-,root,root) > diff --git a/ndctl/Makefile.am b/ndctl/Makefile.am > index 083609a..4d0cccc 100644 > --- a/ndctl/Makefile.am > +++ b/ndctl/Makefile.am > @@ -42,3 +42,8 @@ ndctl_SOURCES += ../test/libndctl.c \ > ../test/core.c \ > test.c > endif > + > +monitor_config_file = monitor.conf > +monitor_configdir = /etc/ndctl/ This path can't be hard coded - we need to pass it in from autoconf via a variable. Also see below in monitor.c. > +monitor_config_DATA = $(monitor_config_file) > +EXTRA_DIST += $(monitor_config_file) > diff --git a/ndctl/monitor.c b/ndctl/monitor.c > index caf8c3d..0b0f8f8 100644 > --- a/ndctl/monitor.c > +++ b/ndctl/monitor.c > @@ -19,6 +19,7 @@ > > static struct monitor { > const char *log; > + const char *config_file; > const char *dimm_event; > bool daemon; > bool human; > @@ -454,6 +455,109 @@ dimm_event_all: > return 0; > } > > +static void parse_config(const char **arg, char *key, char *val, char *ident) > +{ > + struct strbuf value = STRBUF_INIT; > + size_t arg_len = *arg ? strlen(*arg) : 0; > + > + if (!ident || !key || (strcmp(ident, key) != 0)) > + return; > + > + if (arg_len) { > + strbuf_add(&value, *arg, arg_len); > + strbuf_addstr(&value, " "); > + } > + strbuf_addstr(&value, val); > + *arg = strbuf_detach(&value, NULL); > +} > + > +static int read_config_file(struct ndctl_ctx *ctx, struct monitor *_monitor, > + struct util_filter_params *_param) > +{ > + FILE *f; > + int line = 0; > + size_t len = 0; > + char *buf, *value, *config_file; > + const char *def_config_file = "/etc/ndctl/monitor.conf"; Here too, the path needs to come via the same autoconf define as above. > + > + if (_monitor->config_file) > + config_file = strdup(_monitor->config_file); > + else > + config_file = strdup(def_config_file); > + if (!config_file) { > + fail("strdup default config file failed\n"); > + goto out; > + } > + > + buf = malloc(BUF_SIZE); > + if (!buf) { > + fail("malloc read config-file buf error\n"); > + goto out; > + } > + > + f = fopen(config_file, "r"); > + if (!f) { > + fail("config-file: %s cannot be opened\n", config_file); > + goto out; > + } > + > + while (fgets(buf, BUF_SIZE, f)) { > + value = NULL; > + line++; > + > + while (isspace(*buf)) > + buf++; > + > + if (*buf == '#' || *buf == '\0') > + continue; > + > + value = strchr(buf, '='); > + if (!value) { > + fail("config-file syntax error, skip line[%i]\n", line); > + continue; > + } > + > + value[0] = '\0'; > + value++; > + > + while (isspace(value[0])) > + value++; > + > + len = strlen(buf); > + if (len == 0) > + continue; > + while (isspace(buf[len-1])) > + len--; > + buf[len] = '\0'; > + > + len = strlen(value); > + if (len == 0) > + continue; > + while (isspace(value[len-1])) > + len--; > + value[len] = '\0'; > + > + if (len == 0) > + continue; > + > + parse_config(&_param->bus, "bus", value, buf); > + parse_config(&_param->dimm, "dimm", value, buf); > + parse_config(&_param->region, "region", value, buf); > + parse_config(&_param->namespace, "namespace", value, buf); > + parse_config(&_monitor->dimm_event, "dimm-event", value, buf); > + > + if (!_monitor->log) > + parse_config(&_monitor->log, "log", value, buf); > + } > + fclose(f); > + free(config_file); > + return 0; > +out: > + if (config_file) > + free(config_file); > + return 1; > +} > + > int cmd_monitor(int argc, const char **argv, void *ctx) > { > const struct option options[] = { > @@ -469,6 +573,8 @@ int cmd_monitor(int argc, const char **argv, void *ctx) > OPT_FILENAME('l', "log", &monitor.log, > " | syslog | standard", > "where to output the monitor's notification"), > + OPT_FILENAME('c', "config-file", &monitor.config_file, > + "config-file", "override the default config"), > OPT_BOOLEAN('x', "daemon", &monitor.daemon, > "run ndctl monitor as a daemon"), > OPT_BOOLEAN('u', "human", &monitor.human, > @@ -494,7 +600,11 @@ int cmd_monitor(int argc, const char **argv, void *ctx) > ndctl_set_log_fn((struct ndctl_ctx *)ctx, log_standard); > ndctl_set_log_priority((struct ndctl_ctx *)ctx, LOG_NOTICE); > > + if (read_config_file((struct ndctl_ctx *)ctx, &monitor, ¶m)) > + goto out; > + > if (monitor.log) { > + fix_filename(prefix, (const char **)&monitor.log); > if (strcmp(monitor.log, "./syslog") == 0) > ndctl_set_log_fn((struct ndctl_ctx *)ctx, log_syslog); > else if (strcmp(monitor.log, "./standard") != 0) > diff --git a/ndctl/monitor.conf b/ndctl/monitor.conf > new file mode 100644 > index 0000000..857aadf > --- /dev/null > +++ b/ndctl/monitor.conf > @@ -0,0 +1,41 @@ > +# This is the main ndctl monitor configuration file. It contains the > +# configuration directives that give ndctl monitor instructions. > +# You can change the configuration of ndctl monitor by editing this > +# file or using [--config-file=] option to override this one. > +# The changed value will work after restart ndctl monitor service. > + > +# In this file, lines starting with a hash (#) are comments. > +# The configurations should follow = style. > +# Multiple space-separated values are allowed, but except the following > +# characters: : ? / \ % " ' $ & ! * { } [ ] ( ) = < > @ > + > +# The objects to monitor are filtered via dimm's name by setting key "dimm". > +# If this value is different from the value of [--dimm=] option, > +# both of the values will work. > +# dimm = all > + > +# The objects to monitor are filtered via its parent bus by setting key "bus". > +# If this value is different from the value of [--bus=] option, > +# both of the values will work. > +# bus = all > + > +# The objects to monitor are filtered via region by setting key "region". > +# If this value is different from the value of [--region=] option, > +# both of the values will work. > +# region = all > + > +# The objects to monitor are filtered via namespace by setting key "namespace". > +# If this value is different from the value of [--namespace=] option, > +# both of the values will work. > +# namespace = all > + > +# The DIMM events to monitor are filtered via event type by setting key > +# "dimm-event". If this value is different from the value of > +# [--dimm-event=] option, both of the values will work. > +# dimm-event = all > + > +# Users can choose to output the notifications to syslog (log=syslog), > +# to standard output (log=standard) or to write into a special file (log=) > +# by setting key "log". If this value is in conflict with the value of > +# [--log=] option, this value will be ignored. > +# log = /var/log/ndctl/monitor.log _______________________________________________ Linux-nvdimm mailing list Linux-nvdimm@lists.01.org https://lists.01.org/mailman/listinfo/linux-nvdimm