Re: [PATCH] acpi, nfit: fix acpi_check_dsm() vs zero functions implemented

[Xiao Guangrong <guangrong.xiao@linux.intel.com>]

On 06/28/2016 02:58 AM, Dan Williams wrote:
> On Mon, Jun 27, 2016 at 11:47 AM, Linda Knippers <linda.knippers@hpe.com> wrote:
>>
>>
>> On 6/27/2016 2:06 PM, Dan Williams wrote:
>>> On Mon, Jun 27, 2016 at 10:40 AM, Linda Knippers <linda.knippers@hpe.com> wrote:
>>>>
>>>> On 6/24/2016 1:44 PM, Dan Williams wrote:
>>>>> QEMU 2.6 implements nascent support for nvdimm DSMs. Depending on
>>>>> configuration it may only implement the function0 dsm to indicate that
>>>>> no other DSMs are available. Commit 31eca76ba2fc "nfit, libnvdimm:
>>>>> limited/whitelisted dimm command marshaling mechanism" breaks QEMU, but
>>>>> QEMU is spec compliant.  Per the spec the way to indicate that no
>>>>> functions are supported is:
>>>>>
>>>>>      If Function Index is zero, the return is a buffer containing one bit
>>>>>      for each function index, starting with zero. Bit 0 indicates whether
>>>>>      there is support for any functions other than function 0 for the
>>>>>      specified UUID and Revision ID. If set to zero, no functions are
>>>>>      supported (other than function zero) for the specified UUID and
>>>>>      Revision ID.
>>>>
>>>> The rest of that paragraph is:
>>>>
>>>> If set to one, at least one additional function is supported. For all other bits
>>>> in the buffer, a bit is set to zero to indicate if that function index is not
>>>> supported for the specific UUID and Revision ID. (For example, bit 1 set to 0
>>>> indicates that function index 1 is not supported for the specific UUID and
>>>> Revision ID.)
>>>>
>>>>>
>>>>> Update the nfit driver to determine the family (interface UUID) without
>>>>> requiring the implementation to define any other functions, i.e.
>>>>> short-circuit acpi_check_dsm() to succeed per the spec.  The nfit driver
>>>>> appears to be the only user passing funcs==0 to acpi_check_dsm(), so
>>>>> this behavior change of the common routine should be limited to the
>>>>> probing done by the nfit driver.
>>>>
>>>> I don't understand why we're special casing this to support QEMU only when
>>>> there are no DSM functions supported.  If we want to implement the
>>>> spec and support function zero, I think we should support it correctly.
>>>> That means returning the correct value for all spec compliant callers,
>>>> even when there are functions that are supported.
>>>
>>> QEMU 2.6 already shipped, so whatever we do we should not regress
>>> those binaries.  The QEMU behavior could be argued as not spec
>>> compliant, but they've implemented enough of function0 to answer the
>>> "which family" probe.
>>
>> How would you argue that?
>
> acpi_evaluate_dsm() returns data instead of an error.
>
>>> Yes, if an implementation supports function0 it
>>> should say so in the returned bitmask,
>>
>> But in other places you explicitly prevent function 0 from
>> being executed.
>
> Right, for the whitelist-filtered result to userspace, but this patch
> is about the initial kernel probe.
>
>>> but by the time we've
>>> determined that function0 is "not supported" we've already
>>> successfully executed a function0 request.
>>
>> If they advertise a _DSM, I think they have to support function 0.
>
> They should, but didn't.  Kernel v4.6 works with qemu 2.6, kernel v4.7
> does not, so the kernel needs to be fixed.
>

Sorry.

I do not know why you guys think QEMU does not support function 0. It
already returns 0 to indicates "no functions are supported
(other than function zero)".




_______________________________________________
Linux-nvdimm mailing list
Linux-nvdimm@lists.01.org
https://lists.01.org/mailman/listinfo/linux-nvdimm