From: Vaibhav Jain <vaibhav@linux.ibm.com>
To: "Williams\, Dan J" <dan.j.williams@intel.com>,
"linux-nvdimm\@lists.01.org" <linux-nvdimm@lists.01.org>
Cc: "Aneesh Kumar K . V" <aneesh.kumar@linux.ibm.com>
Subject: RE: [ndctl PATCH v5 6/6] libndctl,papr_scm: Implement support for PAPR_PDSM_HEALTH
Date: Fri, 05 Jun 2020 03:25:06 +0530 [thread overview]
Message-ID: <875zc6h4xx.fsf@linux.ibm.com> (raw)
In-Reply-To: <BN6PR11MB41326FB69B35A259A3A6FA61C6890@BN6PR11MB4132.namprd11.prod.outlook.com>
"Williams, Dan J" <dan.j.williams@intel.com> writes:
>> -----Original Message-----
>> From: Vaibhav Jain <vaibhav@linux.ibm.com>
>> Sent: Friday, May 29, 2020 3:06 PM
>> To: linux-nvdimm@lists.01.org
>> Cc: Vaibhav Jain <vaibhav@linux.ibm.com>; Williams, Dan J
>> <dan.j.williams@intel.com>; Verma, Vishal L <vishal.l.verma@intel.com>;
>> Aneesh Kumar K . V <aneesh.kumar@linux.ibm.com>; Jeff Moyer
>> <jmoyer@redhat.com>; Oliver O'Halloran <oohall@gmail.com>; Santosh
>> Sivaraj <santosh@fossix.org>; Weiny, Ira <ira.weiny@intel.com>
>> Subject: [ndctl PATCH v5 6/6] libndctl,papr_scm: Implement support for
>> PAPR_PDSM_HEALTH
>>
>> Add support for reporting DIMM health and shutdown state by issuing
>> PAPR_PDSM_HEALTH request to papr_scm module. It returns an instance of
>> 'struct nd_papr_pdsm_health' as defined in 'papr_pdsm.h'. The patch
>> provides support for dimm-ops 'new_smart', 'smart_get_health' &
>> 'smart_get_shutdown_state' as newly introduced functions
>> papr_new_smart_health(), papr_smart_get_health() &
>> papr_smart_get_shutdown_state() respectively. These callbacks should
>> enable ndctl to report DIMM health.
>>
>> Also a new member 'struct dimm_priv.health' is introduced which holds the
>> current health status of the dimm. This member is set inside newly added
>> function 'update_dimm_health_v1()' which parses the v1 payload returned
>> by the kernel after servicing PAPR_PDSM_HEALTH. The function will also
>> update dimm-flags viz 'struct ndctl_dimm.flags.f_*'
>> based on the flags set in the returned payload.
>>
>> Signed-off-by: Vaibhav Jain <vaibhav@linux.ibm.com>
>> ---
>> Changelog:
>>
>> v4..v5:
>> * Updated patch description to reflect updated names of struct and
>> defines that have the term 'scm' removed.
>>
>> v3..v4:
>> * None
>>
>> v2..v3:
>> * None
>>
>> v1..v2:
>> * Squashed patch to report nvdimm bad shutdown state with this patch.
>> * Switched to new structs/enums as defined in papr_scm_pdsm.h
>> ---
>> ndctl/lib/papr.c | 90
>> ++++++++++++++++++++++++++++++++++++++++++++++--
>> 1 file changed, 87 insertions(+), 3 deletions(-)
>>
>> diff --git a/ndctl/lib/papr.c b/ndctl/lib/papr.c index
>> 1b7870beb631..cb7ff9e0d5bd 100644
>> --- a/ndctl/lib/papr.c
>> +++ b/ndctl/lib/papr.c
>> @@ -42,7 +42,9 @@
>>
>> /* Per dimm data. Holds per-dimm data parsed from the cmd_pkgs */ struct
>> dimm_priv {
>> - /* Empty for now */
>> +
>> + /* Cache the dimm health status */
>> + struct nd_papr_pdsm_health health;
>
[.]
> I don't understand this. The kernel is caching this, why does libndctl
> need to cache it?
Was caching it here as the returned nvdimm health payload from kernel
might be of different version than what was requested and reconstituting
'struct nd_papr_pdsm_health' from 'struct ndctl_cmd' in each dimm-ops
callback would have be costly.
However with payload versioning scheme not used any more this caching
wont be needed anymore.
--
Cheers
~ Vaibhav
_______________________________________________
Linux-nvdimm mailing list -- linux-nvdimm@lists.01.org
To unsubscribe send an email to linux-nvdimm-leave@lists.01.org
prev parent reply other threads:[~2020-06-04 21:55 UTC|newest]
Thread overview: 17+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-05-29 22:05 [ndctl PATCH v5 0/6] Add support for reporting papr nvdimm health Vaibhav Jain
2020-05-29 22:05 ` [ndctl PATCH v5 1/6] libndctl: Refactor out add_dimm() to handle NFIT specific init Vaibhav Jain
2020-06-03 1:05 ` Verma, Vishal L
2020-06-03 7:10 ` Vaibhav Jain
2020-05-29 22:05 ` [ndctl PATCH v5 2/6] libncdtl: Add initial support for NVDIMM_FAMILY_PAPR nvdimm family Vaibhav Jain
2020-06-03 5:47 ` Verma, Vishal L
2020-06-03 9:57 ` Vaibhav Jain
2020-06-03 15:20 ` Verma, Vishal L
2020-06-03 16:49 ` Vaibhav Jain
2020-05-29 22:05 ` [ndctl PATCH v5 3/6] libndctl: Introduce new dimm-ops dimm_init() & dimm_uninit() Vaibhav Jain
2020-06-04 1:28 ` Verma, Vishal L
2020-06-04 21:42 ` Vaibhav Jain
2020-05-29 22:05 ` [ndctl PATCH v5 4/6] libndctl,papr_scm: Add definitions for PAPR nvdimm specific methods Vaibhav Jain
2020-05-29 22:05 ` [ndctl PATCH v5 5/6] papr: Add scaffolding to issue and handle PDSM requests Vaibhav Jain
2020-05-29 22:06 ` [ndctl PATCH v5 6/6] libndctl,papr_scm: Implement support for PAPR_PDSM_HEALTH Vaibhav Jain
2020-06-04 1:26 ` Williams, Dan J
2020-06-04 21:55 ` Vaibhav Jain [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=875zc6h4xx.fsf@linux.ibm.com \
--to=vaibhav@linux.ibm.com \
--cc=aneesh.kumar@linux.ibm.com \
--cc=dan.j.williams@intel.com \
--cc=linux-nvdimm@lists.01.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox