Linux-NVME Archive on lore.kernel.org
 help / color / mirror / Atom feed
From: keith.busch@intel.com (Keith Busch)
Subject: [PATCH] nvme/pci: Remove nvme_setup_prps BUG_ON
Date: Wed, 12 Jul 2017 15:59:07 -0400	[thread overview]
Message-ID: <1499889547-11018-1-git-send-email-keith.busch@intel.com> (raw)

This patch replaces the invalid nvme SGL kernel panic with a warning,
and returns an appropriate error. The warning will occur only on the
first occurance, and sgl details will be printed to help debug how the
request was allowed to form.

Signed-off-by: Keith Busch <keith.busch at intel.com>
---
 drivers/nvme/host/pci.c | 33 +++++++++++++++++++++++++--------
 1 file changed, 25 insertions(+), 8 deletions(-)

diff --git a/drivers/nvme/host/pci.c b/drivers/nvme/host/pci.c
index c4343c4..d321597 100644
--- a/drivers/nvme/host/pci.c
+++ b/drivers/nvme/host/pci.c
@@ -533,7 +533,7 @@ static void nvme_dif_complete(u32 p, u32 v, struct t10_pi_tuple *pi)
 }
 #endif
 
-static bool nvme_setup_prps(struct nvme_dev *dev, struct request *req)
+static blk_status_t nvme_setup_prps(struct nvme_dev *dev, struct request *req)
 {
 	struct nvme_iod *iod = blk_mq_rq_to_pdu(req);
 	struct dma_pool *pool;
@@ -550,7 +550,7 @@ static bool nvme_setup_prps(struct nvme_dev *dev, struct request *req)
 
 	length -= (page_size - offset);
 	if (length <= 0)
-		return true;
+		return BLK_STS_OK;
 
 	dma_len -= (page_size - offset);
 	if (dma_len) {
@@ -563,7 +563,7 @@ static bool nvme_setup_prps(struct nvme_dev *dev, struct request *req)
 
 	if (length <= page_size) {
 		iod->first_dma = dma_addr;
-		return true;
+		return BLK_STS_OK;
 	}
 
 	nprps = DIV_ROUND_UP(length, page_size);
@@ -579,7 +579,7 @@ static bool nvme_setup_prps(struct nvme_dev *dev, struct request *req)
 	if (!prp_list) {
 		iod->first_dma = dma_addr;
 		iod->npages = -1;
-		return false;
+		return BLK_STS_RESOURCE;
 	}
 	list[0] = prp_list;
 	iod->first_dma = prp_dma;
@@ -589,7 +589,7 @@ static bool nvme_setup_prps(struct nvme_dev *dev, struct request *req)
 			__le64 *old_prp_list = prp_list;
 			prp_list = dma_pool_alloc(pool, GFP_ATOMIC, &prp_dma);
 			if (!prp_list)
-				return false;
+				return BLK_STS_RESOURCE;
 			list[iod->npages++] = prp_list;
 			prp_list[0] = old_prp_list[i - 1];
 			old_prp_list[i - 1] = cpu_to_le64(prp_dma);
@@ -603,13 +603,29 @@ static bool nvme_setup_prps(struct nvme_dev *dev, struct request *req)
 			break;
 		if (dma_len > 0)
 			continue;
-		BUG_ON(dma_len < 0);
+		if (unlikely(dma_len < 0))
+			goto bad_sgl;
 		sg = sg_next(sg);
 		dma_addr = sg_dma_address(sg);
 		dma_len = sg_dma_len(sg);
 	}
 
-	return true;
+	return BLK_STS_OK;
+
+ bad_sgl:
+	if (WARN_ONCE(1, "Invalid SGL for payload:%d nents:%d\n",
+				blk_rq_payload_bytes(req), iod->nents)) {
+		for_each_sg(iod->sg, sg, iod->nents, i) {
+			dma_addr_t phys = sg_phys(sg);
+			pr_warn("sg[%d] phys_addr:%pad offset:%d length:%d "
+			       "dma_address:%pad dma_length:%d\n", i, &phys,
+					sg->offset, sg->length,
+					&sg_dma_address(sg),
+					sg_dma_len(sg));
+		}
+	}
+	return BLK_STS_IOERR;
+
 }
 
 static blk_status_t nvme_map_data(struct nvme_dev *dev, struct request *req,
@@ -631,7 +647,8 @@ static blk_status_t nvme_map_data(struct nvme_dev *dev, struct request *req,
 				DMA_ATTR_NO_WARN))
 		goto out;
 
-	if (!nvme_setup_prps(dev, req))
+	ret = nvme_setup_prps(dev, req);
+	if (ret != BLK_STS_OK)
 		goto out_unmap;
 
 	ret = BLK_STS_IOERR;
-- 
2.5.5

             reply	other threads:[~2017-07-12 19:59 UTC|newest]

Thread overview: 4+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2017-07-12 19:59 Keith Busch [this message]
2017-07-13  6:56 ` [PATCH] nvme/pci: Remove nvme_setup_prps BUG_ON Sagi Grimberg
2017-07-13  7:28 ` Christoph Hellwig
2017-07-13  7:50 ` Johannes Thumshirn

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1499889547-11018-1-git-send-email-keith.busch@intel.com \
    --to=keith.busch@intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox